RESUMEN
Per- and polyfluoroalkyl substances (PFAS) are globally distributed and potentially toxic compounds. We report accumulation of chloroperfluoropolyethercarboxylates (Cl-PFPECAs) and perfluorocarboxylates (PFCAs) in vegetation and subsoils in New Jersey. Lower molecular weight Cl-PFPECAs, containing 7-10 fluorinated carbons, and PFCAs containing 3-6 fluorinated carbons were enriched in vegetation relative to surface soils. Subsoils were dominated by lower molecular weight Cl-PFPECAs, a divergence from surface soils. Contrastingly, PFCA homologue profiles in subsoils were similar to surface soils, likely reflecting temporal-use patterns. Accumulation factors (AFs) for vegetation and subsoils decreased with increasing CF2, 6-13 for vegetation and 8-13 in subsoils. In vegetation, for PFCAs having CF2 = 3-6, AFs diminished with increasing CF2 as a more sensitive function than for longer chains. Considering that PFAS manufacturing has transitioned from long-chain chemistry to short-chain, this elevated vegetative accumulation of short-chain PFAS suggests the potential for unanticipated PFAS exposure levels globally in human and/or wildlife populations. This inverse relationship between AFs and CF2-count in terrestrial vegetation is opposite the positive relationship reported in aquatic vegetation suggesting aquatic food webs may be preferentially enriched in long-chain PFAS. AFs normalized to soil-water concentrations increased with chain length for CF2 = 6-13 in vegetation but remained inversely related to chain length for CF2 = 3-6, reflecting a fundamental change in vegetation affinity for short chains compared to long.
Asunto(s)
Ácidos Alcanesulfónicos , Fluorocarburos , Contaminantes Químicos del Agua , Humanos , Fluorocarburos/análisis , Suelo , Cadena Alimentaria , Contaminantes Químicos del Agua/análisisRESUMEN
Nanomaterials are increasingly used in polymer composites to enhance their properties, such as mechanical performance and durability, increased electrical conductivity, and improved optical clarity. Here results are presented of a study simulating effects of weathering on degradation of a nanosilica-low-density polyethylene (LDPE) composite. Release of nanosilica from LDPE composites is a potential source of toxic SiO2. Nanosilica based LDPE composites were weathered under carefully controlled conditions by exposure to simulated sunlight. The effects of an added pro-oxidant on weathering was examined. Weathering of the composites with pro-oxidant was determined by quantifying changes in infrared spectroscopic properties (Fourier transform infrared spectroscopy / FTIR); mechanical properties, atomic force microscopy (AFM), scanning electron microscopy and other procedures. Wavelength effects on weathering rates were determined in a series of irradiations using simulated solar radiation passed through light filters that blocked different parts of the ultraviolet spectral region. Rates and spectral irradiance were then analyzed to develop spectral weighting functions (SWFs) that quantify wavelength effects on the sunlight-induced weathering of the pro-oxidant amended composites.
RESUMEN
Over the past several years, the term PFAS (per- and polyfluoroalkyl substances) has grown to be emblematic of environmental contamination, garnering public, scientific, and regulatory concern. PFAS are synthesized by two processes, direct fluorination (e.g., electrochemical fluorination) and oligomerization (e.g., fluorotelomerization). More than a megatonne of PFAS is produced yearly, and thousands of PFAS wind up in end-use products. Atmospheric and aqueous fugitive releases during manufacturing, use, and disposal have resulted in the global distribution of these compounds. Volatile PFAS facilitate long-range transport, commonly followed by complex transformation schemes to recalcitrant terminal PFAS, which do not degrade under environmental conditions and thus migrate through the environment and accumulate in biota through multiple pathways. Efforts to remediate PFAS-contaminated matrices still are in their infancy, with much current research targeting drinking water.
Asunto(s)
Contaminantes Ambientales , Polímeros de Fluorocarbono , Fluorocarburos , Animales , Biodegradación Ambiental , Agua Potable/química , Exposición a Riesgos Ambientales , Contaminantes Ambientales/análisis , Contaminantes Ambientales/química , Contaminantes Ambientales/toxicidad , Restauración y Remediación Ambiental , Polímeros de Fluorocarbono/análisis , Polímeros de Fluorocarbono/química , Polímeros de Fluorocarbono/toxicidad , Fluorocarburos/análisis , Fluorocarburos/química , Fluorocarburos/toxicidad , Halogenación , Humanos , Contaminación Química del Agua/análisisRESUMEN
The toxicity and environmental persistence of anthropogenic per- and poly-fluoroalkyl substances (PFAS) are of global concern. To address legacy PFAS concerns in the United States, industry developed numerous replacement PFAS that commonly are treated as confidential information. To investigate the distribution of PFAS in New Jersey, soils collected from across the state were subjected to nontargeted mass-spectral analyses. Ten chloroperfluoropolyether carboxylates were tentatively identified, with at least three congeners in all samples. Nine congeners are ≥(CF2)7 Distinct chemical formulas and structures, as well as geographic distribution, suggest airborne transport from an industrial source. Lighter congeners dispersed more widely than heavier congeners, with the most widely dispersed detected in an in-stock New Hampshire sample. Additional data were used to develop a legacy-PFAS fingerprint for historical PFAS sources in New Jersey.
Asunto(s)
Ácidos Carboxílicos/análisis , Conservación de los Recursos Naturales , Éteres/análisis , Fluorocarburos/análisis , Suelo/química , Ácidos Carboxílicos/toxicidad , Éteres/toxicidad , Fluorocarburos/toxicidad , Espectrometría de Masas , New JerseyRESUMEN
Annealing a supported polymer film in the melt state results in the growth of an irreversibly adsorbed layer, which has been shown to influence thin film properties such as diffusion and glass transition temperature. Adsorbed layer growth is attributed to many simultaneous interactions between individual monomer units and the substrate, stabilizing chains against desorption. In this study, adsorbed layers of polystyrene (PS), poly(methyl methacrylate) (PMMA), and their random copolymers are isolated by select solvents. While PS adsorbed layer thickness is largely unaffected by the choice of washing solvent, the PMMA adsorbed layer completely desorbs when washed with tetrahydrofuran and chloroform, as opposed to toluene. Scaling relationships between adsorbed layer thickness and degree of chain adsorption at the substrate enable the use of adsorbed layer thickness to probe specific polymer-substrate interactions. Composition-dependent desorption trends indicate non-preferential adsorption between styrene and methyl methacrylate repeat units at the substrate, despite differences in substrate interaction strength. This insight contributes to the developing mechanism for the adsorption of random copolymers during melt-state annealing, further extending the ability to predict processing-inducted changes to the properties of polymer thin films to heterogeneous systems.
Asunto(s)
Polímeros/química , Polimetil Metacrilato/química , Poliestirenos/química , Solventes/química , Adsorción , Cloroformo/química , Furanos/química , Polímeros/síntesis química , Solubilidad , Propiedades de Superficie , Temperatura , Tolueno/químicaRESUMEN
In recent years, an increasing number of polymeric composites incorporating engineered nanomaterials (ENMs) have reached the market. Such nano-enabled products (NEPs) present enhanced performance through improved mechanical, thermal, UV protection, electrical, and gas barrier properties. However, little is known about how environmental weathering impacts ENM release, especially for high-tonnage NEPs like kaolin products, which have not been extensively examined by the scientific community. Here we study the simulated environmental weathering of different polymeric nanocomposites (epoxy, polyamide, polypropylene) filled with organic (multiwalled carbon nanotube, graphene, carbon black) and inorganic (WS2, SiO2, kaolin, Fe2O3, Cu-phthalocyanines) ENMs. Multiple techniques were employed by researchers at three laboratories to extensively evaluate the effect of weathering: ultraviolet-visible spectroscopy (UV-vis), Fourier transform infrared spectroscopy (FTIR), optical microscopy, contact angle measurements, gravimetric analysis, analytical ultracentrifugation (AUC), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and Raman spectroscopy. This work aimed to elucidate the extent to which weathering protocol (i.e. wet vs. dry) and diverse filler characteristics modulate fragment release and polymer matrix degradation. In doing so, it expanded the established NanoRelease protocol, previously used for analyzing fragment emission, by evaluating two significant additions: (1) simulated weathering with rain events and (2) fractionation of sample leachate prior to analysis. Comparing different composite materials and protocols demonstrated that the polymer matrix is the most significant factor in NEP aging. Wet weathering is more realistic than dry weathering, but dry weathering seems to provide a more controlled release of material over wet. Wet weathering studies could be complicated by leaching, and the addition of a fractionation step can improve the quality of UV-vis measurements.
RESUMEN
Interfaces play an important role in modifying the dynamics of polymers confined to the nanoscale. We demonstrate that the distance over which an interface suppresses molecular mobility in poly(styrene) thin films can be systematically increased by tens of nanometers by controlling the chain of conformation, i.e., the height of the loops in irreversibly adsorbed nanolayers. These effects arise from topological interaction between adsorbed and neighboring unadsorbed chains, respectively, which increase their motional coupling to facilitate the propagation of suppressed dynamics originating at the interface, thus highlighting the ability to manipulate interfacial effects by local conformation of chains in adsorbed nanolayers.
RESUMEN
Annealing a supported polymer film in the melt state, a common practice to relieve residual stresses and erase thermal history, can result in the development of an irreversibly adsorbed nanolayer. This layer of polymer chains physically adsorbed to the substrate interface has been shown to influence thin film properties such as viscosity and glass transition temperature. Its growth is attributed to many simultaneous interactions between individual monomer units and the substrate stabilizing chains against desorption. A better understanding of how these specific polymer-substrate interactions influence the growth of the adsorbed layer is needed, particularly given how strongly the properties of geometrically-confined polymeric systems are impacted by interfaces. Here, we use homopolymers and random copolymers of styrene and methyl methacrylate to form adsorbed layers and examine the influence of chemical composition and the resulting polymer-substrate interactions on adsorbed layer growth and structure. Ellipsometric measurements reveal a non-monotonic trend between composition and thickness of the adsorbed layers that is inconsistent with the behavior normally exhibited by random copolymers, being intermediate to their respective homopolymers. We examine this trend in terms of plateau thickness and growth kinetics at two different annealing temperatures and propose a mechanism for how different polymer-substrate interactions combine to influence adsorption when copolymer films are annealed. By introducing compositional heterogeneity, this mechanism extends the study of irreversible adsorption to complex chemistries and provides for a more general understanding of how annealing should be accounted for in the proper selection and processing of polymer thin films for applications in nanotechnology.
RESUMEN
In an effort to document mental health outreach in our primary care clinic, 316 veterans (mean age 72) not currently in psychiatric treatment were screened for multiple mental health symptoms. Depressed mood was reported by 18% of the sample, insomnia by 26%, and morbid/suicidal ideation by 6.9% for at least several days during the past 2 weeks. Of those who experienced a loss over the past year (43%), 36% remained affected by the loss. Also reported were anxiety symptoms (29%) and PTSD symptoms (14%). Two-fifths (39%) of patients reported drinking alcohol in the past week, 18% more than 5 days, and 13% more than 3 drinks per sitting. Twenty-six percent of the patients reported symptoms warranting intervention; of these, only 39% accepted a treatment referral. While screening for depressed mood and alcohol use is now common in primary care, we found it useful to screen for specific symptoms of depression (including insomnia and suicidal ideation), persisting grief reactions, anxiety, and PTSD in this setting. Further research is necessary to determine factors that underlie some patients' refusal to accept mental health treatment.