RESUMEN
Bench tests of a 15 keV helium ion source, which has been developed for the neutral particle diagnostic system of the International Thermonuclear Experimental Reactor (ITER), are described. Being part of the diagnostic system, the ion source will be used to monitor the intactness of carbon stripping foils as well as to check the detection and dispersion systems of the main diagnostic instruments-neutral particle analyzers (NPAs). The ion source produces a wide 5-cm diameter (FWHM) ion beam at a distance of about 50 cm; the ion beam uniformity at a 2-cm area corresponding to the size of the stripping foil is not worse than 10%. The beam current over the area of the stripping foil can be adjusted in the range of 0.1 pA-1 pA. After initial heating, the temporal stability of the ion beam is better than 10%. Pulse height measurements of registered signals show that 15 keV He+ ions can be reliably registered by the NPA detector system. The obtained results allow us to conclude that the developed ion source can provide a reliable check of the NPA system during the diagnostic performance on the ITER tokamak.
RESUMEN
An injector of fast deuterium atoms for plasma heating was designed and installed at the Tokamak à Configuration Variable (TCV). The neutral beam can deliver 1 MW power to the plasma in 2 s pulses. An ion beam of the injector is formed by a triode multislit ion-optical system with spherical electrodes which provide ballistic focusing. Tests at TCV revealed that the total angular divergence of the neutral beam across the slits exceeded the expected value more than twice. It was finally established that this increase in divergence was caused by the asymmetry of the chamfers at the slit edges of the plasma electrode. The redesigned shape of the slits of the plasma grid together with precise machining significantly improved the beam quality. Experimental testing proved that the neutral beam profile in the direction across the grid slits became very close to the expected value.
RESUMEN
A plane cathode composed of close-packed hexagonal LaB6 (lanthanum hexaboride) segments is described. The 6 cm diameter circular cathode is heated by radiation from a graphite foil flat spiral. The cathode along with a hollow copper anode is used for the arc discharge plasma production in a newly developed linear plasma device. A separately powered coil located around the anode is used to change the magnetic field strength and geometry in the anode region. Different discharge regimes were realized using this coil.
RESUMEN
A 1000 keV, 5 MW, 1000 s neutral beam injector based on negative ions is being developed in the Budker Institute of Nuclear Physics, Novosibirsk in collaboration with Tri Alpha Energy, Inc. The innovative design of the injector features the spatially separated ion source and an electrostatic accelerator. Plasma or photon neutralizer and energy recuperation of the remaining ion species is employed in the injector to provide an overall energy efficiency of the system as high as 80%. A test stand for the beam acceleration is now under construction. A prototype of the negative ion beam source has been fabricated and installed at the test stand. The prototype ion source is designed to produce 120 keV, 1.5 A beam.
RESUMEN
The paper reviews the results of development of steady-state arc-discharge plasma generator with directly heated LaB6 cathode. This arc-discharge plasma generator produces a plasma jet which is to be converted into an atomic one after recombination on a metallic plate. The plate is electrically biased relative to the plasma in order to control the atom energies. Such an intensive jet of hydrogen atoms can be used in negative ion sources for effective production of negative ions on a cesiated surface of plasma grid. All elements of the plasma generator have an augmented water cooling to operate in long pulse mode or in steady state. The thermo-mechanical stresses and deformations of the most critical elements of the plasma generator were determined by simulations. Magnetic field inside the discharge chamber was optimized to reduce the local power loads. The first tests of the steady-state arc plasma generator prototype have performed in long-pulse mode.
RESUMEN
The status and the executing modernization of RUssian Diagnostic Injector (RUDI) are described. The ion source consists of arc plasma emitter and multiaperture four-electrode ion optical system. The present ion optical system with round beamlets is to be replaced by new slit apertures system for the reducing beam angular divergence in one direction. Due to enlarged dimensions and transparency of new ion optical system the extracted ion beam current will be by 50% increased. For the extension of beam pulse duration from 4 s to 8-10 s an optimized metal-ceramic arc-discharge channel is introduced. In the paper, the optical measurements results of beam parameters, including the profile of species distribution, scanned by custom-built multichannel spectroscope, are also presented.
RESUMEN
A well-known Pierce solution that allows focusing a beam of charged particles using properly shaped electrodes outside the beam aperture is generalized to the case of an accelerating system with inhomogeneous emission current density. It is shown that the defocusing effect of the space charge can, in principle, be evenly compensated over the entire cross section of the beam. In contrast to the beam with a uniform emission current density, both the electric potential and the transverse electric field must be controlled along the beam boundary in order to eliminate the angular divergence. However, eliminating the angular spread evenly across the beam constitutes a mathematically ill-posed problem which needs to be solved with the use of one or another method of regularization. An alternative way of diminishing beam emittance is proposed for the beam where the emission current is uniform across the entire aperture except for a narrow beam edge layer and a simple formula for the Pierce electrodes is derived. Numerical simulation has proved the reasonable accuracy of our analytical theory.
RESUMEN
Ion beam formation by four-electrode ion optical system with slit finite length apertures is considered. Results of numerical simulations by two and three dimensional codes shown that accurate ion beam formation in slit aperture with semicircular ends can be provided. In experimental studies of beam formation in single slit ion optical system angular beam divergences of 0.53 degrees across the slit and 0.35 degrees along it were measured. Studied slit ion optical system will be used for ion beam formation in diagnostic neutral injector for large W-7X stellarator.
RESUMEN
Fast ions are observed to be very well confined in the Madison Symmetric Torus reversed field pinch despite the presence of stochastic magnetic field. The fast-ion energy loss is consistent with the classical slowing down rate, and their confinement time is longer than expected by stochastic estimates. Fast-ion confinement is measured from the decay of d-d neutrons following a short pulse of a 20 keV atomic deuterium beam. Ion confinement agrees with computation of particle trajectories in the stochastic magnetic field, and is understood through consideration of ion guiding center islands.