Refermentation and maturation of lambic beer in bottles: a necessary step for gueuze production.

The production of gueuze beers through refermentation and maturation of blends of lambic beer in bottles is a way for lambic brewers to cope with the variability among different lambic beer batches. The resulting gueuze beers are more carbonated than lambic beers and are supposed to possess a unique flavor profile that varies over time. To map this refermentation and maturation process for gueuze production, a blend of lambic beers was made and bottled, whereby one of them was produced with the old wheat landrace Zeeuwse Witte. Through the use of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and high-throughput sequencing of bacterial and fungal amplicons, in combination with metabolite target analysis, new insights into gueuze production were obtained. During the initial stages of refermentation, the conditions in the bottles were similar to those encountered during the maturation phase of lambic beer productions in wooden barrels, which was also reflected microbiologically (presence of Brettanomyces species, Pediococcus damnosus, and Acetobacter lambici) and biochemically (ethanol, higher alcohols, lactic acid, acetic acid, volatile phenolic compounds, and ethyl esters). However, after a few weeks of maturation, a switch from a favorable environment to one with nutrient and dissolved oxygen depletion resulted in several changes. Concerning the microbiology, a sequential prevalence of three lactic acid bacterial species occurred, namely, P. damnosus, Lentilactobacillus buchneri, and Lactobacillus acetotolerans, while the diversity of the yeasts decreased. Concerning the metabolites produced, mainly those of the Brettanomyces yeasts determined the metabolic profiles encountered during later stages of the gueuze production.IMPORTANCEGueuze beers are the result of a refermentation and maturation process of a blend of lambic beers carried out in bottles. These gueuze beers are known to have a long shelf life, and their quality typically varies over time. However, knowledge about gueuze production in bottles is scarce. The present study provided more insights into the varying microbial and metabolite composition of gueuze beers during the first 2 years of this refermentation and maturation process. This will allow gueuze producers to gain more information about the influence of the refermentation and maturation time on their beers. These insights can also be used by gueuze producers to better inform their customers about the quality of young and old gueuze beers.

Fruit beers, beers with or without a co-fermentation step with fruits.

Belgium is known for its traditional lambic beer productions, obtained through spontaneous fermentation and maturation in wooden barrels. Lambic beer is also used to make fruit lambic beers, such as Kriek beer. Despite fruit beer being an old beer type, dating back to the second half of the seventeenth century, no research has been performed on lambic beer-fruit co-fermentation processes. Further, these beers get competition from market-driven, sweet, (fruit-)flavored ones without the co-fermentation step. This paper will first discuss a new, general fruit beer classification, going from sour fruit beers produced through co-fermentation to sweet ones without a co-fermentation step. Second, a state-of-the-art of the scarce literature on the microbiology and metabolomics of lambic beer-fruit co-fermentation processes will be given.

New insights into the role of key microorganisms and wooden barrels during lambic beer fermentation and maturation.

Belgian lambic beers are still produced through traditional craftsmanship. They rely on a spontaneous fermentation and maturation process that is entirely carried out in wooden barrels. The latter are used repetitively and may introduce some batch-to-batch variability. The present systematic and multiphasic study dealt with two parallel lambic beer productions carried out in nearly identical wooden barrels making use of the same cooled wort. It encompassed a microbiological and metabolomic approach. Further, a taxonomic classification and metagenome-assembled genome (MAG) investigation was based on shotgun metagenomics. These investigations provided new insights into the role of these wooden barrels and key microorganisms for this process. Indeed, besides their role in traditionality, the wooden barrels likely helped in establishing the stable microbial ecosystem of lambic beer fermentation and maturation by acting as an inoculation source of the necessary microorganisms, thereby minimizing batch-to-batch variations. They further provided a microaerobic environment, which aided in achieving the desirable succession of the different microbial communities for a successful lambic beer production process. Moreover, these conditions prevented excessive growth of acetic acid bacteria and, therefore, uncontrolled production of acetic acid and acetoin, which may lead to flavor deviations in lambic beer. Concerning the role of less studied key microorganisms for lambic beer production, it was shown that the Acetobacter lambici MAG contained several acid tolerance mechanisms toward the harsh environment of maturing lambic beer, whereas genes related to sucrose and maltose/maltooligosaccharide consumption and the glyoxylate shunt were absent. Further, a Pediococcus damnosus MAG possessed a gene encoding ferulic acid decarboxylase, possibly contributing to 4-vinyl compound production, as well as several genes, likely plasmid-based, related to hop resistance and biogenic amine production. Finally, contigs related to Dekkera bruxellensis and Brettanomyces custersianus did not possess genes involved in glycerol production, emphasizing the need for alternative external electron acceptors for redox balancing.

Technological and Environmental Features Determine the Uniqueness of the Lambic Beer Microbiota and Production Process.

Lambic beers are beers produced through spontaneous fermentation and maturation in wooden barrels. The production process of lambic beers differs from the production processes of lagers and ales in process technology, environmental parameters, and the use of specific raw materials. Moreover, every lambic beer production process is unique in terms of microbiology and flavor formation because of its dependence on the spontaneous inoculation of microorganisms coming from the environmental air (contacting the open coolship and other brewery equipment) and the inner surfaces of the barrels. Several factors influence the inter- and intraspecies microbial successions during lambic beer wort fermentation and maturation and determine the final quality of the end products. The possibility to manually acidify the wort, the presence of species-specific metabolic traits, the environmental temperature, the co-occurrence of lactic acid bacteria and acetic acid bacteria, as well as yeasts, and the quality of the wooden barrels all determine the progress and outcome of the lambic beer production process. Further alterations in quality and flavor of lambic beers can be achieved by blending practices and additional bottle refermentations. This results in a vast array of lambic-derived beer products (e.g., gueuze) with complex taste and aroma profiles and specific characteristics, which separate them from most other commercially available beers.

Temporal Shotgun Metagenomics Revealed the Potential Metabolic Capabilities of Specific Microorganisms During Lambic Beer Production.

Lambic beer production processes are characterized by a temporal succession of well-adapted microbial species. Temporal metagenomic analysis of a Belgian, traditional, lambic beer production process, which was examined microbiologically and metabolomically before, confirmed that the microbial diversity is limited. Moreover, it allowed to link the consumption and production of certain compounds to specific microbial groups or species. Fermentation characteristics, such as the conversion of malic acid into lactic acid and acetoin production, were retrieved and could be attributed to specific microorganisms, namely Pediococcus damnosus and Acetobacter species, respectively. Traits previously ascribed to brewery-specific Dekkera bruxellensis strains were confirmed during the lambic beer production process examined multiphasically; in particular, the higher production of 4-ethylguaiacol compared to 4-ethylphenol was further shown by mass spectrometric analysis. Moreover, the absence of phenolic acid decarboxylase in Brettanomyces custersianus was shown culture-independently and could explain its late occurrence during the maturation phase. Furthermore, the potential of maltooligosaccharide degradation could be ascribed metagenomically to not only Brettanomyces species but also Saccharomyces kudriavzevii, possibly explaining their degradation early in the lambic beer production process. Also, acetic acid bacteria (AAB) seemed to be able to consume maltooligosaccharides via their conversion into trehalose. Furthermore, these AAB possessed esterase genes, potentially capable of forming ethyl acetate, which may contribute to the flavor of lambic beer. Improved knowledge on the reasons behind certain community dynamics and the role of the different microorganisms in terms of potential functionality could improve brewery practices to assure to produce more quality-stable end-products.

Microbial acidification, alcoholization, and aroma production during spontaneous lambic beer production.

Acidic beers, such as Belgian lambic beers and American and other coolship ales, are becoming increasingly popular worldwide thanks to their refreshing acidity and fruity notes. The traditional fermentation used to produce them does not apply pure yeast cultures but relies on spontaneous, environmental inoculation. The fermentation and maturation process is carried out in wooden barrels and can take up to three years. It is characterized by different microbial species belonging to the enterobacteria, acetic acid bacteria, lactic acid bacteria, and yeasts. This review provides an introduction to the technology and four fermentation strategies of beer production, followed by the microbiology of acidic beer production, focusing on the main microorganisms present during the long process used for the production of Belgian lambic beers. © 2018 Society of Chemical Industry.

Wort Substrate Consumption and Metabolite Production During Lambic Beer Fermentation and Maturation Explain the Successive Growth of Specific Bacterial and Yeast Species.

The present study combined high-throughput culture-dependent plating and culture-independent amplicon sequencing with a metabolite target analysis to systematically dissect the identity, evolution, and role of the microorganisms, substrates, and metabolites during the four-phase fermentation and maturation process of lambic beer production. This led to the following new insights. The changing physicochemical parameters and substrate and metabolite compositions of the fermenting wort and maturing lambic beer provoked several transitions between microbial species and explained the four-step production process. Manual wort acidification with lactic acid shortened the enterobacterial phase and thus kept biogenic amine formation by enterobacteria present during the early stages of fermentation at a minimum. Growth advantages during the alcoholic fermentation phase caused a transition from the prevalence by Hanseniaspora uvarum and Kazachstania species to that by Saccharomyces cerevisiae and later on Saccharomyces kudriavzevii, due to changing environmental parameters. During the acidification phase, Pediococcus damnosus was prevalent and performed a malolactic fermentation. Acetobacter pasteurianus produced acetic acid and acetoin. Upon maturation, Dekkera species appeared, together with P. damnosus and Pichia membranifaciens, thereby contributing to acetic acid production, depending on the oxygen availability. Moreover, the Dekkera species consumed the acetoin produced by the acetic acid bacteria for redox balancing. The breakdown of maltooligosaccharides seemed to be independent of the occurrence of Dekkera species and started already early in the fermentation process.

Acetic acid bacteria in fermented foods and beverages.

Although acetic acid bacteria (AAB) are commonly found in spontaneous or backslopped fermented foods and beverages, rather limited knowledge about their occurrence and functional role in natural food fermentation ecosystems is available. Not only is their cultivation, isolation, and identification difficult, their cells are often present in a viable but not culturable state. Yet, they are promising starter cultures either to better control known food fermentation processes or to produce novel fermented foods and beverages. This review summarizes the most recent findings on the occurrence and functional role of AAB in natural food fermentation processes such as lambic beer, water kefir, kombucha, and cocoa.