RESUMEN
Background/Aims: The current standard of care to perform an anterior chamber paracentesis involves the use of a multipurpose market needle and syringe. The use of standard needles for this purpose may result in injury to the patient due to increased force with insertion and increased globe displacement during the procedure. This research investigates the current market needle characteristics and the impact of each needle characteristic on force. Methods: Several comparative trials were conducted to evaluate the needles. Needle characteristics of interest were gauge, primary bevel angle, number of bevels in the lancet, and needle hub geometry. Measurements of corneal insertion forces were made using a synthetic thermoplastic polyurethane medium, and bovine and porcine models. Needle safety was investigated with corneal abrasion experiments. Results: Reduced insertion force was observed with lower lancet primary angle. There was no difference based on the number of bevels in the lancet. Rounded hub geometry had minimal distribution to the corneal epithelium. Conclusions: Needle characteristics impact the force needed for needle insertion into the tissue. Since higher force can lead to increased risk and less efficiency during the procedure, reducing this force may improve the outcomes of the procedure. Needle entry can be reduced by designing an improved needle that includes a lower gauge and reduced primary angle of the lancet.
Asunto(s)
Agujas , Paracentesis , Animales , Bovinos , Humanos , Porcinos , Paracentesis/efectos adversos , Modelos Animales , Cámara Anterior/cirugíaRESUMEN
PURPOSE: Pressure ulcers (PUs) are prevalent among immobile bed or wheelchair-reliant individuals who experience prolonged sedentary positions. Pressure relief and frequent repositioning of body posture help to mitigate complications associated with PUs. Adherence with regular repositioning is difficult to maintain due to nursing labour shortages or constraints of in-home caregivers. Manual repositioning, transferring, and lifting of immobile patients are physically demanding tasks for caregivers. This review aimed to explore and categorize these devices, discuss the significant technical challenges that need addressing, and identify potential design opportunities. MATERIALS AND METHODS: In this review, a literature search was conducted using PubMED, Science Direct, Google Scholar and IEEE Xplore databases including studies from 1995 until Feb 2023 with keywords such as pressure ulcer, assistive device, pressure relief, repositioning, transfer, etc. Both commercial and research-level devices were included in the search. RESULTS: 142 devices or technologies were identified and classified into four main categories that were further subcategorized. Within each category, the devices were investigated in terms of their mechanical design, actuation methods, control strategies, sensing technologies, and level of autonomy. Limitations of current technologies are design complexity, lack of patient comfort, and a lack of autonomy requiring caregivers frequent intervention. CONCLUSIONS: Several devices have been developed to help with prevention and mitigation of PUs. There remain challenges that hinder the widespread accessibility and use of current technologies. Advancements in assistive technologies for pressure ulcer mitigation could lie at the intersection of robotics, sensors, perception, user-centered design, and autonomous systems.IMPLICATIONS FOR REHABILITATIONFuture advancements in assistive technologies for pressure ulcer mitigation could lie at the intersection of robotics, sensors, perception, user-centered design, and autonomous systems.Most existing technologies for prevention of pressure ulcers are focused on the mechanical advantage rather than user's needs and preferences. Future designers, engineers, and product developers must be educated to conduct user needs studies concurrently with the development of technology to design the devices based on the user's needs to ensure a balanced design outcome.
Asunto(s)
Infecciones por Coronavirus , Pulmón , Pandemias , Neumonía Viral , Anticuerpos Monoclonales Humanizados , Betacoronavirus , COVID-19 , Citocinas , SARS-CoV-2RESUMEN
BACKGROUND: Noise in the operating room may cause distractions during critical periods and impair reliable communication between staff. Even momentary inefficiency while administering anesthesia can lead to errors and serious consequences for the patient. Distractions to an anesthesia provider during critical periods such as induction and emergence are a patient safety issue. Because of concerns regarding unacceptable noise levels and distractions during induction of general anesthesia, our institution developed a quality improvement initiative, the "Distraction-Free Induction Zone." The specific aim of this project was to decrease the percentage of cases with a distraction, described as music, unnecessary conversations, or loud noises, occurring during induction of general anesthesia in pediatric otolaryngology operating rooms from 61% to 15%. METHODS: To complete this quality improvement initiative, a multidisciplinary team used improvement science methods, including The Model for Improvement with interventions tested via Plan-Do-Study-Act cycles. We used tools such as the Key Driver Diagram, Pareto Charts, Process Flow Chart, and Plan-Do-Study-Act worksheets. Data were manually collected and entered weekly in an Excel spreadsheet. Statistical process control methods, including a run chart and a P-control chart, were used for data analysis. Our measure was a composite measure in which observation of 1 of the 3 distractions during induction of general anesthesia categorized the case as a case with a distraction. RESULTS: We tested and implemented several interventions via Plan-Do-Study-Act cycles in which 3 main interventions collectively were associated with an observed decrease in distractions during induction of general anesthesia. These included educating the perioperative staff present in the operating room to help them understand that distractions to anesthesia providers represent a patient safety issue, the operating room circulating nurse taking responsibility to pause any music on arrival to the operating room, and the anesthesiologist reminding the staff in the operating room of induction time and/or asking for quiet during induction if a distraction occurs. The percentage of cases with a distraction during induction of general anesthesia in our pediatric otolaryngology operating rooms decreased from 61% to 15% by April 15, 2017 and to 10% by June 5, 2017. CONCLUSIONS: Using improvement science methods, we observed a decrease in distractions during induction of general anesthesia, improved a process, and encouraged change in culture at a large academic children's hospital to enhance the quality and safety of the anesthetic care we provide our patients.
Asunto(s)
Centros Médicos Académicos/normas , Anestesia General/normas , Personal de Salud/normas , Hospitales Pediátricos/normas , Cuidados Preoperatorios/normas , Mejoramiento de la Calidad/normas , Centros Médicos Académicos/métodos , Anestesia General/métodos , Anestésicos/administración & dosificación , Humanos , Cuidados Preoperatorios/métodos , Encuestas y CuestionariosRESUMEN
Escherichia coli leucyl-tRNA synthetase (LeuRS) aminoacylates up to six different class II tRNA(leu) molecules. Each has a distinct anticodon and varied nucleotides in other regions of the tRNA. Attempts to construct a minihelix RNA that can be aminoacylated with leucine have been unsuccessful. Herein, we describe the smallest tRNA(leu) analog that has been aminoacylated to a significant extent to date. A series of tRNA(leu) analogs with various domains and combinations of domains deleted was constructed. The minimal RNA that was efficiently aminoacylated with LeuRS was one in which the anticodon stem-loop and variable arm stem-loop, but neither the D-arm nor T-arm, were deleted. Aminoacylation of this minimal RNA was abolished when the discriminator base A73 was replaced with C73 or when putative tertiary interactions between the D-loop and T-loop were disrupted, suggesting that these identity elements are still functioning in the minimized RNA. The various constructs that were significantly aminoacylated were also tested for amino acid editing by the synthetase. The anticodon and variable stem-loop domains were also dispensable for hydrolysis of the charged tRNA(leu) mimics. These results suggest that LeuRS may rely on identity elements in overlapping domains of the tRNA for both its aminoacylation and editing activities.