Effect of salivary fluid characteristics on the physical features of in vitro bread bolus: From the absence of saliva to artificially simulated hypersalivation.

Saliva facilitates food oral processing, bolus formation, swallowing, and sensory perception, in addition to contributing to oral health and phonation. Ageing, health affections, and polymedication are among many causes altering salivary production, modifying the mastication process, the food impregnation ratio, and in turn altering the characteristics of the bolus, swallowing, and digestion. In this in vitro work, using the AM2 masticator apparatus, which replicates the mechanical actions taking place while chewing solid foods and produces realistic food bolus in various oral conditions, we investigated the effect of salivary fluid characteristics, i.e., composition, quantity (from absence to hypersalivation), temperature, and enzymatic action, on the physical characteristics (i.e., particle size distribution (PSD), bolus mass, salivary fluid content) of in vitro boluses of Traditional French baguette. A ready-to-swallow bolus of baguette displayed on average a d50 value (median particle size by mass) of 4.1 ± 0.4 mm, with saliva fluid constituting âˆ¼ 35 % of the final bolus mass. The absence of saliva in mouth led to a deficient oral processing, forming bread boluses constituted by extremely big particles (ca. 80 % of particles had a size > 7.1 mm) that likely cannot be swallowed safely. On the contrary, an excess of saliva favoured an excessive breaking down of bread, leading to bread boluses constituted by smaller particles than those formed under healthy salivary conditions (d50 decreased from 4.1 mm to 3.1 mm), having a higher salivary fluid content (+10 %). On the other hand, the salivary fluid temperature did not affect PSD, d50, bolus mass, or salivary fluid content of in vitro bread boluses, however, the addition of human salivary α-amylase did, favouring particle size reduction (d50 decreased to 2.6 mm). Therefore, beyond the correlation between bolus hydration by saliva and food properties such as hardness and moisture content, our findings indicate that the quantity of salivary fluid present in the oral cavity and the enzymatic activity of salivary α-amylase during bread mastication significantly influence both the particle size distribution and the fluid content of bread boluses, ultimately determining the physical properties of the bolus and, therefore, potentially impacting the subsequent swallowing process.

In Vitro Resistance of Natural Molars vs. Additive-Manufactured Simulators Treated with Pulpotomy and Endocrown.

Endocrowns are designed to restore endodontically treated teeth with root canal treatment (Rct). Recently, endocrowns were proposed for teeth treated with full pulpotomy (FP). No data exist on in vitro evaluations for this combination. This study aimed to evaluate the mechanical behavior of pulpotomy-treated teeth with endocrowns according to different protocols for preparation design and materials and to assess whether 3D-printed resin simulators could be a reliable alternative for human teeth during in vitro strength tests. One hundred and ten extracted natural molars were randomized into 11 groups according to the type of endodontic treatment, the material used, and the design of peripheric preparation. One hundred and ten resin simulators were separated similarly. The samples were embedded in epoxy resin blocks before being subjected to oblique compressive load until failure. For natural teeth, the variance analysis separated two homogeneous groups, one regrouping the endodontically treated or pulpotomy-treated teeth without coronal restoration and the other one regrouping all the other samples, i.e., the untreated teeth (positive controls) and the treated and restored teeth. The strength resistance was lower for the resin simulators than for natural teeth in all groups. Within the limit of this study, strength resistance is not the most important criterion for choosing the type of material, preparation, or endodontic treatment for endocrowns. Resin simulators are not efficient for in vitro strength studies.

Relationship between Oral Health Status and Oropharyngeal Dysphagia in Older People: A Systematic Review.

The purpose of this review is to investigate the relationship between oral health status and oropharyngeal dysphagia (OD) in older people and to collect a list of oral health indicators that can enable carers and health professionals to screen for risk of dysphagia in older people during oral examinations. A systematic review was performed following the Preferred Reporting Items for Systematic Reviews and Meta-Analysis Protocol (PRISMA-P 2015) guidelines. The analysis methods and inclusion criteria were documented in a protocol published in the Prospective International Register of Systematic Reviews (PROSPERO) under the registration number CRD42020140458. A total of 19 articles published between 2002 and 2020 were retained by the search criteria for the qualitative synthesis. Eighteen studies demonstrated at least one positive association between an oral health component (dental, salivary and/or muscular) and dysphagia. This review highlights that oral health and OD are associated but was not able to determine causality. The lack of scientific evidence could be explained by the observational approach of the majority of the studies and the irrelevant choice of oral health indicators. A relationship may exist between oral health and dysphagia, but this review highlights the lack of valid and standardized oral health indicators that would be needed to assess the impact of oral health on the overall health status of individuals.

Comprehensive Dental Treatment under General Anesthesia Improves Mastication Capability in Children with Early Childhood Caries-A One-Year Follow-Up Study.

BACKGROUND: Using the granulometry of ready-to-swallow food boluses, this study investigated the evolution of masticatory capability of children with Early Childhood Caries (ECC) after comprehensive dental treatment under general anesthesia (GA). METHODS: Sixteen children with ECC were assessed before and over one year after dental treatment under GA, in comparison with 12 children with a Healthy Oral State (HOS). Oral health criteria, quality of life, body mass index, and frequency of orofacial dysfunctions were recorded. Masticatory kinematic parameters and median food bolus particle size (D50) at swallowing were assessed while masticating raw carrot (CAR), cheese (CHS), and breakfast cereals (CER). The impact of posterior teeth extractions was analyzed. RESULTS: Quality of life and orofacial functions improved after dental treatment. Chewing frequency for all three foods increased without reaching the values of children with HOS, while D50 values for CAR and CHS decreased. After one year, children with posterior teeth extractions exhibited higher D50 values for CAR and CHS than children with only conservative treatment. One third of children with ECC were overweight or obese. CONCLUSIONS: Comprehensive dental treatment improved children's mastication, and their BMI subsequently increased. Links between mastication and nutrition should be investigated further in children.

Dental Trauma Management in a Young Teenager through Endodontics and Implantology: A Case Report.

Endodontic treatment is often the first-line procedure to manage the immediate or long-term aftermath of dental trauma, particularly in cases of luxation or avulsion. Failure to manage trauma in the short or medium term leads to significant functional or aesthetic consequences, especially in the adolescence period. Under this specific conditions, endodontic treatment could provide a temporary solution by keeping teeth with poor prognosis on the arch while waiting for better anatomical conditions for implantology. This clinical case aimed to describe the management of a maxilla-facial dental trauma and the following consequences in a 10-year-old male patient. Clinical and radiological examination showed complete extrusive luxation of 11 and 21 and intrusive luxation of 12 and 22. Endodontic treatment of 11 and 21 was performed six months after the trauma. Two years later, the patient was referred to the endodontic department because pink spot lesions appeared on 12 and 22 due to cervical invasive resorptions (class III for 12 and class II for 22). Endodontic treatment of 12 and filling with resin composite of 22 were performed. During the following two years, complication management finally led to placement of four OBI® (Euroteknika, Sallanches, France)-type mini-implants after avulsion of all four maxillary incisors. Palliative endodontic treatment helped maintain the prosthetic space and the volume of supporting tissue needed for future implant placement. The interest of using delaying procedures (palliative endodontic treatments and mini-implants) was to allow the patient to complete growth. Managing early treatment failure of trauma in adolescents has to be pluridisciplinary and should take into account the evaluation of the treatment's difficulty, the prognosis of the endodontic treatment, the available bone volume and the pubertal growth stage.

Radiological Evaluation of Stainless Steel Crowns Placed on Permanent Teeth in Patients Treated under General Anaesthesia.

Evidence-based evaluations of dental treatment are needed to support the development of special care dentistry services. This retrospective study was designed to collect and analyse X-ray images of permanent teeth restored with stainless steel crowns (SSC) in patients treated under general anaesthesia. Between 2013 and 2019, 360 permanent molars were crowned with SSCs in 198 adult patients. One calibrated investigator used an original validated tool to evaluate four radiographic criteria for molars restored with SSCs: (i) marginal adaptation; (ii) interdental proximal contact; (iii) the presence of glass ionomer cement overflow; and (iv) the loss of alveolar bone. Overall, no defect or a minor defect was reported for the majority of SSCs for the criteria "Marginal adaptation" (62.5%, n = 320), "Proximal contact" (82.2%, n = 236) and "Cement overflow" (95.8%, n = 337). Alveolar bone resorption was reported in 8.3% of cases, n = 14, after a mean period of 8.9 ± 14.3 months. It was shown that the restoration of permanent teeth using SSCs placed under general anaesthesia presents a low risk of periodontal morbidity in the medium term when assessed radiographically.

Revisiting Orstavik's PAI score to produce a reliable and reproducible assessment of the outcomes of endodontic treatments in routine practice.

INTRODUCTION: Orstavik's periapical index is widely used for radiographic assessment of periapical status. This study analyses the reliability and reproducibility of a modified guide for the interpretation of the periapical index (PAI) scores recorded by undergraduate students. MATERIALS AND METHOD: Two groups of 4th-year students were asked to assess the PAI scores of 100 X-rays two or three times depending on the group. The reliability of their judgment was evaluated by comparing the students' assessments to those of a standard, based on the evaluations made by three teachers. Short-term stability was evaluated for two lengths of interval separating the Test and Retest phases, respectively, 1 week for Group 1 and 2 weeks for Group 2. Long-term stability was evaluated by having Group 1 repeat the Retest phase after 15 months. RESULTS: Overall mean success rates ranged from 61% to 65% according to the student group and the study phase. Intergroup comparisons showed no statistical difference. The reliability of the PAI score evaluation by students was excellent in both groups. Short-term and long-term stability were also excellent regardless of the duration of the interval between the study's phases. DISCUSSION: The image misinterpretations are discussed according to the study phases and the PAI score values. CONCLUSION: Undergraduate students can be trained to use the modified guide for scoring PAI for self-evaluation of the outcomes of the root canal treatments and re-treatments they are asked to perform during their clinical sessions.

A Comprehensive Approach Limiting Extractions under General Anesthesia Could Improve Oral Health.

Access to dental treatment could be difficult for some patients due to dental phobia or anxiety, cognitive or sensorial disabilities, systemic disorders, or social difficulties. General anesthesia (GA) was often indicated for dental surgery, and there is almost no available data on adapted procedures and materials that can be applied during GA for maintaining functional teeth on the arches and limiting oral dysfunctions. This study evaluates changes in oral health-related quality of life and mastication in a cohort of uncooperative patients treated under GA according to a comprehensive and conservative dental treatment approach. Dental status, oral health-related quality of life, chewed bolus granulometry, kinematic parameters of mastication, and food refusals were evaluated one month preoperatively (T0), and then one month (T1) and six months post-operatively (T2). One hundred and two adult patients (mean age ± SD: 32.2 ± 9.9 years; range: 18-57.7) participated in the preoperative evaluation, 87 were treated under GA of which 36 participated in the evaluation at T1 and 15 were evaluated at T2. Preoperative and postoperative data comparisons demonstrated that oral rehabilitation under GA helped increase chewing activity and oral health-related quality of life. The conditions for providing dental treatment under GA could be arranged to limit dental extractions in uncooperative patients.

A Combination of Full Pulpotomy and Chairside CAD/CAM Endocrown to Treat Teeth with Deep Carious Lesions and Pulpitis in a Single Session: A Preliminary Study.

A higher chance of carrying out a successful full pulpotomy may depend on whether the coronal restoration can be completed within a single appointment. The development of chairside CAD/CAM (Computer Aided Design and Manufacturing) technology has made it possible to carry out indirect restoration of endodontically treated teeth in a single session. This study aimed to evaluate the long-term outcome of a full pulpotomy with Biodentine™ immediately covered with a chairside CAD/CAM endocrown on teeth affected by pulpitis and deep carious lesions. The investigation involved a cohort of 30 molars that were treated by pulpotomy and CAD/CAM endocrown. Clinical and radiological examinations were scheduled at 1, 6, and 12 months postoperatively. Overall, all treatments were effective at any time during the follow-up. The results of this study need to be confirmed with a longer-term follow-up to allow for comparison with the literature. This original combination of endodontic and restorative treatments provides an Endo-prosthetic continuum in a single session, with the objective of long-term success in terms of tooth health.

Long-term Outcomes of Full Pulpotomy in Permanent Molars for Patients Treated in a Single, Short Session under Special Conditions.

INTRODUCTION: Endodontic procedures for patients requiring treatment in a single, short session need to be validated. This study aimed at evaluating the long-term outcome of full pulpotomy in permanent molars performed with reinforced zinc oxide-eugenol cement (Intermediate Restorative Material [IRM], Dentsply Sirona, Versailles, France) immediately restored using stainless steel crowns under general anesthesia. METHODS: The absence of clinical signs and symptoms and the evolution of the periapical index between the treatment date and the longest follow-up time were used to grade the pulpotomy outcome as "effective," "uncertain," or "ineffective." The impact of different criteria on the pulpotomy outcome was tested (ie, the etiology of the lesion, tooth maturity, endodontic difficulty related to the coronal shape and the root canal shape, and endodontic difficulty related to the radiographic root canal appearance). RESULTS: Among the 608 teeth (338 patients) treated in a single session with IRM full pulpotomy and stainless steel preformed crowns, 263 (143 patients) were evaluated after a median follow-up period of 24 months. Overall, 89% of the pulpotomies were effective, 7.6% were of uncertain outcome, and 3.4% were ineffective. No tested criteria influenced the rate of effectiveness. CONCLUSIONS: Long-term outcomes of IRM pulpotomy are similar to those of calcium silicate-based cement pulpotomy observed in the literature. This procedure should not be restricted to patients treated under general anesthesia because it is relevant for all special conditions that impose the provision of endodontic treatment in a single, short session, such as dental care emergencies during humanitarian crises or pandemic periods.

The "Plan" phase of a Deming cycle: Measurement of quality and outcome of root canal treatments in a university hospital.

INTRODUCTION: In many countries, dental students are taught in private or university hospitals where they treat patients under the supervision of teachers. Assessing the quality of root canal treatments (RCT) would provide information about the quality of care patients receive when treated by students. METHODS: This study describes the six-step "Plan" phase of a Plan-Do-Check-Act (PDCA) cycle that identifies and analyses clinical practices in endodontics in a university dental hospital service. RESULTS: Step 3 reported that the proportion of RCTs of adequate quality reached 57.1% and this proportion was significantly decreased when specific indicators for treatment difficulties were present. The proportion of successful RCTs after 1 year was 65.6%, and its variation was influenced by the preoperative periapical status rather than the quality of RCTs. The consensual meeting in Step 6 proposed to introduce three new procedures for the further Do, Check and Act phases of the PDCA cycle. CONCLUSION: This study encourages systematic evaluation of RCTs and provides the first step of the methodology that can be reproduced in private and hospital practices where students are asked to treat patients.

[Development and evaluation of a triage tool for patients in a dental emergency unit]. / Construction et évaluation d'un outil d'orientation des patients vers une unité d'urgence odontologique.

OBJECTIVE: This study was designed to develop and evaluate a guidance tool to refer patients with dental emergencies to a hospital dental emergency unit. METHODS: The referring tool was first developed. It was designed to define a waiting timeforpatient management by assessing the clinical signs described by these patients on presentation at the dental care unit. The validity of the tool was then assessed by comparing the waiting time defined by the referring tool to that defined by a practitionerfor 300 patients attending the Emergency Dental Unit in Clermont-Ferrand. Indicators for specificity, sensitivity and the kappa coefficient were used. RESULTS: The referring tool was able to define a waiting timefor 92% of patients. It was able to correctly identify patients needing care "within 24h" (s = 0.84, k = 0.72). Patients who reportedfew symptomswere referred within a "3-7 days" waiting time (s= 0.88, k = 0.62). The tool was less effective for patients needing care within "1-2 days"(s = 0.42, k= 0.41), whose clinical signs were less acute. Specificity exceeded 0.8 in every case. Accordingly, regardless of the waiting time, the use of this tool avoided scheduling appointments for patients who did not need care. The toolfacilitated emergency unit activity, as 50% ofthe appointments could be scheduled beyond 24 hours. CONCLUSION: The metrological characteristics of the referring tool were well adapted to the setting studied.

Ceramo-Metal Crown or Cad-Cam Rehabilitation: Patient and Practitioner Appraisal.

Crowns produced using CAD-CAM technology must be evaluated so they can be integrated in the dentist's therapeutic arsenal. To this end, an evaluation tool for the fixed element units was developed and tested in a randomized cross-over pilot study. At a hospital centre, 10 single crowns from the same dental preparation and produced using CEREC technology were compared to Ceramo-Metal Crowns produced using a conventional procedure. Practitioners generally evaluated CEREC crowns more positively, corroborating the subjects' preference for these crowns. The CEREC technology used in a hospital setting meets the requirements of both patients and practitioners.