Improvement of Lithium-Sulfur Battery Performance by Porous Carbon Selection and LiFSI/DME Electrolyte Optimization.

High-concentration lithium bis(fluorosulfonyl)imide/1,2-dimethoxyethane (LiFSI/DME) electrolytes are promising candidates for highly reversible lithium-metal anodes. However, the performance of lithium-sulfur (Li-S) batteries with a high concentration of LiFSI/DME declines because LiFSI reacts irreversibly with lithium polysulfide, which is formed during the charge-discharge process of Li-S batteries. Hence, to apply high-concentration LiFSI/DME to Li-S batteries, we investigated carbon with an appropriate pore size for use in a sulfur composite cathode and optimized the composition of high-concentration LiFSI/DME. The results showed that the combination of carbon with mesopores of 2-3 nm diameter and 3 M LiFSI in DME/1,1,2,2-tetrafluoroethyl 2,2,3,3-tetrafluoropropylether (HFE) (1:1 by vol.) provided a high-rate capability (943 mA h g-1 at a rate of 2 C). Moreover, the ratio of the 50th discharge capacity to the 2nd discharge capacity (capacity retention) improved from 50.0 to 61.6% with HFE dilution of high-concentration LiFSI/DME. The improved performance was achieved by suppressing the dissolution of lithium polysulfide, decreasing the viscosity of the electrolyte, and forming a thin solid electrolyte interface on the lithium-metal anode due to HFE dilution.

High Capacity Li2 S-Li2 O-LiI Positive Electrodes with Nanoscale Ion-Conduction Pathways for All-Solid-State Li/S Batteries.

All-solid-state lithium-sulfur (Li/S) batteries are promising next-generation energy-storage devices owing to their high capacities and long cycle lives. The Li2 S active material used in the positive electrode has a high theoretical capacity; consequently, nanocomposites composed of Li2 S, solid electrolytes, and conductive carbon can be used to fabricate high-energy-density batteries. Moreover, the active material should be constructed with both micro- and nanoscale ion-conduction pathways to ensure high power. Herein, a Li2 S-Li2 O-LiI positive electrode is developed in which the active material is dispersed in an amorphous matrix. Li2 S-Li2 O-LiI exhibits high charge-discharge capacities and a high specific capacity of 998 mAh g-1 at a 2 C rate and 25 °C. X-ray photoelectron spectroscopy, X-ray diffractometry, and transmission electron microscopy observation suggest that Li2 O-LiI provides nanoscale ion-conduction pathways during cycling that activate Li2 S and deliver large capacities; it also exhibits an appropriate onset oxidation voltage for high capacity. Furthermore, a cell with a high areal capacity of 10.6 mAh cm-2 is demonstrated to successfully operate at 25 °C using a Li2 S-Li2 O-LiI positive electrode. This study represents a major step toward the commercialization of all-solid-state Li/S batteries.

Iron Sulfide Na2 FeS2 as Positive Electrode Material with High Capacity and Reversibility Derived from Anion-Cation Redox in All-Solid-State Sodium Batteries.

It is desirable for secondary batteries to have high capacities and long lifetimes. This paper reports the use of Na2 FeS2 with a specific structure consisting of edge-shared and chained FeS4 as the host structure and as a high-capacity active electrode material. An all-solid-state sodium cell that uses Na2 FeS2 exhibits a high capacity of 320 mAh g-1 , which is close to the theoretical two-electron reaction capacity of 323 mAh g-1 , and operates reversibly for 300 cycles. The excellent electrochemical properties of all-solid-state sodium cells are derived from the anion-cation redox and rigid host structure during charging/discharging. In addition to the initial one-electron reaction of Nax FeS2 (1 ≤ x ≤ 2) activated Fe2+ /Fe3+ redox as the main redox center, the reversible sulfur redox further contributes to the high capacity. Although the additional sulfur redox affects the irreversible crystallographic changes, stable and reversible redox reactions are observed without capacity fading, owing to the local maintenance of the chained FeS4 in the host structure. Sodium iron sulfide Na2 FeS2 , which combines low-cost elements, is one of the candidates that can meet the high requirements of practical applications.

Multimodal Plant Healthcare Flexible Sensor System.

The rising global human population and increased environmental stresses require a higher plant productivity while balancing the ecosystem using advanced nanoelectronic technologies. Although multifunctional wearable devices have played distinct roles in human healthcare monitoring and disease diagnosis, probing potential physiological health issues in plants poses a formidable challenge due to their biological complexity. Herein an integrated multimodal flexible sensor system is proposed for plant growth management using stacked ZnIn2S4(ZIS) nanosheets as the kernel sensing media. The proposed ZIS-based flexible sensor can not only perceive light illumination at a fast response (∼4 ms) but also monitor the humidity with a perdurable steady performance that has yet to be reported elsewhere. First-principles calculations reveal that the tunneling effect dominates the current model associated with humidity response. This finding guides the investigation on the plant stomatal functions by measuring plant transpiration. Significantly, dehydration conditions are visually recorded during a monitoring period (>15 days). This work may contribute to plant-machine biointerfaces to precisely manage plant health status and judiciously utilize limited resources.

A reversible oxygen redox reaction in bulk-type all-solid-state batteries.

An all-solid-state lithium battery using inorganic solid electrolytes requires safety assurance and improved energy density, both of which are issues in large-scale applications of lithium-ion batteries. Utilization of high-capacity lithium-excess electrode materials is effective for the further increase in energy density. However, they have never been applied to all-solid-state batteries. Operational difficulty of all-solid-state batteries using them generally lies in the construction of the electrode-electrolyte interface. By the amorphization of Li2RuO3 as a lithium-excess model material with Li2SO4, here, we have first demonstrated a reversible oxygen redox reaction in all-solid-state batteries. Amorphous nature of the Li2RuO3-Li2SO4 matrix enables inclusion of active material with high conductivity and ductility for achieving favorable interfaces with charge transfer capabilities, leading to the stable operation of all-solid-state batteries.