Review of non-penetrating ballistic testing techniques for protection assessment: From biological data to numerical and physical surrogates.

Human surrogates have long been employed to simulate human behaviour, beginning in the automotive industry and now widely used throughout the safety framework to estimate human injury during and after accidents and impacts. In the specific context of blunt ballistics, various methods have been developed to investigate wound injuries, including tissue simulants such as clays or gelatine ballistic, physical dummies and numerical models. However, all of these surrogate entities must be biofidelic, meaning they must accurately represent the biological properties of the human body. This paper provides an overview of physical and numerical surrogates developed specifically for blunt ballistic impacts, including their properties, use and applications. The focus is on their ability to accurately represent the human body in the context of blunt ballistic impact.

A new biomechanical FE model for blunt thoracic impact.

In the field of biomechanics, numerical procedures can be used to understand complex phenomena that cannot be analyzed with experimental setups. The use of experimental data from human cadavers can present ethical issues that can be avoided by utilizing biofidelic models. Biofidelic models have been shown to have far-reaching benefits, particularly in evaluating the effectiveness of protective devices such as body armors. For instance, numerical twins coupled with a biomechanical model can be used to assess the efficacy of protective devices against intense external forces. Similarly, the use of human body surrogates in experimental studies has allowed for biomechanical studies, as demonstrated by the development of crash test dummies that are commonly used in automotive testing. This study proposes using numerical procedures and simplifying the structure of an existing biofidelic FE model of the human thorax as a preliminary step in building a physical surrogate. A reverse engineering method was used to ensure the use of manufacturable materials, which resulted in a FE model called SurHUByx FEM (Surrogate HUByx Finite Element Model, with HUByx being the original thorax FE model developed previously). This new simplified model was validated against existing experimental data on cadavers in the context of ballistic impact. SurHUByx FEM, with its new material properties of manufacturable materials, demonstrated consistent behavior with the corresponding biomechanical corridors derived from these experiments. The validation process of this new simplified FE model yielded satisfactory results and is the first step towards the development of its physical twin using manufacturable materials.

Effect of blast loading on the risk of rib fractures: a preliminary 3D numerical investigation.

Blast is a complex phenomenon which needs to be understood, especially in a military framework, where this kind of loading can have severe consequences on the human body. Indeed, the literature lists a number of studies which try to investigate the dangerousness of such a phenomenon, both at experimental and numerical level, and the injuries that could occur when the fighters or police officers are stroke by blast wave. When focusing on primary blast effect, this paper analyses the effect of this loading on the occurrence of rib fracture, using previously developed injury risk curves.

Surface Texturization of Breast Implants Impacts Extracellular Matrix and Inflammatory Gene Expression in Asymptomatic Capsules.

BACKGROUND: Texturing processes have been designed to improve biocompatibility and mechanical anchoring of breast implants. However, a high degree of texturing has been associated with severe abnormalities. In this study, the authors aimed to determine whether implant surface topography could also affect physiology of asymptomatic capsules. METHODS: The authors collected topographic measurements from 17 different breast implant devices by interferometry and radiographic microtomography. Morphologic structures were analyzed statistically to obtain a robust breast implant surface classification. The authors obtained three topographic categories of textured implants (i.e., "peak and valleys," "open cavities," and "semiopened cavities") based on the cross-sectional aspects. The authors simultaneously collected 31 Baker grade I capsules, sorted them according to the new classification, established their molecular profile, and examined the tissue organization. RESULTS: Each of the categories showed distinct expression patterns of genes associated with the extracellular matrix (Timp and Mmp members) and inflammatory response (Saa1, Tnsf11, and Il8), despite originating from healthy capsules. In addition, slight variations were observed in the organization of capsular tissues at the histologic level. CONCLUSIONS: The authors combined a novel surface implant classification system and gene profiling analysis to show that implant surface topography is a bioactive cue that can trigger gene expression changes in surrounding tissue, even in Baker grade I capsules. The authors' new classification system avoids confusion regarding the word "texture," and could be transposed to implant ranges of every manufacturer. This new classification could prove useful in studies on potential links between specific texturizations and the incidence of certain breast-implant associated complications.

Geometrical and material parameters to assess the macroscopic mechanical behaviour of fresh cranial bone samples.

The present study aims at providing quantitative data for the personalisation of geometrical and mechanical characteristics of the adult cranial bone to be applied to head FE models. A set of 351 cranial bone samples, harvested from 21 human skulls, were submitted to three-point bending tests at 10 mm/min. For each of them, an apparent elastic modulus was calculated using the beam's theory and a density-dependant beam inertia. Thicknesses, apparent densities and percentage of ash weight were also measured. Distributions of characteristics among the different skull bones show their symmetry and their significant differences between skull areas. A data analysis was performed to analyse potential relationship between thicknesses, densities and the apparent elastic modulus. A specific regression was pointed out to estimate apparent elastic modulus from the product of thickness by apparent density. These results offer quantitative tools in view of personalising head FE models and thus improve definition of local injury criteria for this body part.

Skull wounds linked with blunt trauma (hammer example). A report of two depressed skull fractures--elements of biomechanical explanation.

The lesions of the skull following perforating traumas can create complex fractures. The blunt traumas can, according to the swiftness and the shape of the object used, create a depressed fracture. The authors describe through two clinical cases the lesional characteristic of the blunt traumas, perforating the skull using a hammer. In both cases the cranial lesions were very typical: they were geometrical, square shaped, of the same size than the tool (head and tip of the hammer). On the outer table of the skull, the edges of the wounds were sharp and regular. On the inner table, the edges of the wounds were beveled and irregular. The bony penetration in the depressed fracture results from a rupture of the outer table of the bone under tension, in periphery, by the bend of the bone to the impact (outbending) and then, from the inner table with comminuted bony fragmentation. Breeding on the fractures of the size and the shape of the blunt objects used is inconstant and differs, that it is the objects of flat surface or wide in opposition to those of small surface area. Fractures morphologies depend on one hand on these extrinsic factors and on the other hand, of intrinsic factors (structure of the bone). To identify them, we had previously conducted experimental work on cranial bone samples. The bone was submitted to a device for three-point bending. This work had shown properties of thickness and stiffness of the various areas of the vault. Our cases are consistent with these results and illustrate the variability of bone lesions according to region and mode of use of blunt weapons. Many studies have identified criteria for identification of the weapons and the assistance of digital and biomechanical models will be an invaluable contribution with this aim in the future.