RESUMEN
Blue cobalt inorganic pigments with spinel-type structure have been revisited in order to understand the origin of blackening at low temperatures and to design strong blue nanosized materials. Starting from a sol-gel process, the so-called Pechini route, the correlation between the structural features (inversion rate, Co over-stoichiometry, Co valence states) of the spinel network and its thermal history under air up to high temperatures (T = 1400 °C) allows concluding that the stabilization of CoIII in octahedral sites is at the origin of the blackening of the pigment annealed at low and medium temperatures. EELS coupled with TEM analyses (occurrence of multiple phases with various Al/Co atomic ratios) lead to us to conclude definitively about the variation of Co valence states. A top-down (mechanical grinding) and a bottom-up approach lead to the definition of a synthesis route (co-precipitation in basic medium followed by annealing at medium temperatures under Ar) allowing the design of strong blue pure nano-sized pigments to be incorporated in inks. Hybrid blue positively charged particles were mixed with white negatively charged particles to formulate dual-colour inks. A dual-colour display was filled with the as-prepared inks and tested under ±150 V.
RESUMEN
New Pr1-xZrxO2-y oxides with x < 0.5 have been prepared by co-precipitation in basic medium and annealed under air at high temperatures (T≤ 1200 °C). Defined compositions with x = 0.02, 0.1, 0.2, 0.35, 0.40 and 0.5 have been characterized by XRD, Zr-K-edge EXAFS for the local structure, magnetic susceptibility measurements, and Pr LIII-edge XANES in order to identify the variation of the cell parameter and Zr local environment versus Zr content and Pr(n+) (4 < n < 3) oxidation states. The higher the Zr content, the lower the Pr valence state. The Zr amount stabilized in the distorted octahedral site is at the origin of the formation of defined compositions as discovered by Leroy Eyring et al. in the PrnO2n-2m series and the generation of oxygen vacancies stabilized in the fluorite-type network. TGA and TPR analyses help to follow the reduction properties under Ar/5% H2 and show high Pr reducible rates at low temperatures (T < 250 °C). The identification of the fluorite-type superstructure (SG: Ia3[combining macron]) of reduced compositions annealed at T = 900 °C under Ar/5% H2 shows the cationic and oxygen vacancy ordering. This feature plays a key role with Zr(4+) cations stabilized in flattened octahedral sites for the generation of oxygen vacancies and the stabilization of Pr(3+) in the reduced states.
RESUMEN
Two Co(1-x)Mg(x)MoO(4) oxide compositions (x=0 and x=0.4) were investigated as potential pressure indicators. The first order phase half-transition induced by pressure application from the ß to the α form, i.e. from the high temperature/low pressure form to the high pressure/low temperature form, was studied thanks to the powder diffuse reflection (color) evolution versus the applied pressure. Three key parameters were analyzed: (i) the magnesium content, (ii) the powder grain sizes, (iii) the pressure application mode (uniaxial or isostatical). It was shown these three parameters allow tuning the transition pressure in a wide range from few bars to few kbars.
RESUMEN
A series of compounds of Co(1-x)Mg(x)MoO(4) compositions has been prepared by a conventional ceramic route. The members of the whole solid solution exhibit a reversible first-order phase transition which was probed by using thermal expansion and low-temperature reflectivity techniques. Whereas the α â ß transition temperature evolves linearly on warming from 435 to 200 °C with x going from 0 to 0.9, the ß â α transition temperature variation falls down on cooling from -40 °C to -140 °C going from CoMoO(4) to Co(0.1)Mg(0.9)MoO(4) with an asymptotic evolution. The phase transition temperatures have been explained on the basis of a crystal polarization effect under substitution of Mg for Co. Thus, from an applicative point of view, new thermochromic pigments with tunable transition temperatures are here proposed.
RESUMEN
Zinc/cobalt aluminates with spinel-type structure were prepared by a polymeric route, leading to a pure phase with controlled grain size. The prepared pigments were characterized by powder X-ray diffraction Rietveld analyses in order to determine structural features, scanning electron microscopy for morphological investigation, helium pycnometry and (27)Al MAS NMR in order to highlight the occurrence of defects inside the structure, and UV-visible-near-IR spectroscopy to identify electronic transitions responsible for the compounds' color. The green-blue coloration of these pigments is known to be dependent on the sample thermal history. Here, for the first time, the Zn(1-x)Co(x)Al(2)O(4) color is newly interpreted. The pigment is green once synthesized at low temperature (i.e., with diminution of the pigment grain size); this variation was attributed to the appearance of a new absorption band located at about 500 nm, linked to a complex network feature involving Co ions in octahedral sites as well as oxygen and cationic vacancies. Hence, this work shows the possibility of easily getting a nonstoichiometric network with an abnormal cationic distribution from "chimie douce" processes with moderate synthesis temperature, and so various colorations for the same composition.
RESUMEN
The members of the CuMo(1- x)WxO4 series (0 < or = x < 0.1) undergo a first-order phase transition that can be induced by pressure application; the thermochromic properties of such a series have already been reported. The two polymorphic forms exhibit two distinguishable colors: green for the low pressure form (alpha) and brownish-red for the high pressure one (gamma). These oxides can open up a new market for friendly pressure indicators, particularly for the compositions (0.07 < or = x < or = 0.1) for which the two polymorphs are stable at room temperature, that is, for which the color transition via pressure application is nonreversible. Within the CuMo(1- x)WxO4 solid solution domain, the dependence of the transition pressure versus tungsten content, temperature of measurement, and sample thermal-pressure history was studied. A large control of the transition pressure (from 5 to several 100 MPa) was brought to the fore. The transition was then studied using X-ray diffraction and transmission electron microscopy-energy dispersive X-ray analyses. This first-order transition, occurring by atomic migration inside the cell, seems to be preceded by an atomic disordering; moreover, transition temperatures may be modified by W segregation at the surface of the grains.
RESUMEN
ZnO doped with Co2+ has been prepared by a Pechini process and investigated in terms of crystallographic structure and UV-visible properties. We emphasize for the first time a splitting of the ZnO band gap in two "sub-band gaps" (never clearly mentioned until now) which is fully interpreted basing on the iono-covalent nature of the O-Zn bonds. An anticipative approach of the potential structure relaxations was discussed from exchanged effective charge per bond calculated with the purely ionic Brown and Altermatt model.
RESUMEN
The members of the CuMo1-xWxO4 series (0
RESUMEN
Zn1-xCuxAl2O4 (0
RESUMEN
High magnetic field and high spinning frequency one- and two-dimensional one-pulse MAS 19F NMR spectra of beta-ZrF4 and CeF4 were recorded and reconstructed allowing the accurate determination of the 19F chemical shift tensor parameters for the seven different crystallographic fluorine sites of each compound. The attributions of the NMR resonances are performed using the superposition model for 19F isotropic chemical shift calculation initially proposed by Bureau et al. (Bureau, B.; Silly, G.; Emery, J.; Buzaré, J.-Y. Chem. Phys. 1999, 249, 85-104). A satisfactory reliability is reached with a root-mean-square (rms) deviation between calculated and measured isotropic chemical shift values equal to 1.5 and 3.5 ppm for beta-ZrF4 and CeF4, respectively.