RESUMEN
Disorder in redox-active monolayers convolutes electrochemical characterization. This disorder can come from pinhole defects, loose packing, heterogeneous distribution of redox-active headgroups, and lateral interactions between immobilized redox-active molecules. Identifying the source of non-ideal behaviour in cyclic voltammograms can be challenging as different types of disorder often cause similar non-ideal cyclic voltammetry behaviour such as peak broadening, large peak-to-peak separation, peak asymmetry and multiple peaks for single redox processes. This Review provides an overview of ideal voltammetric behaviour for redox-active monolayers, common manifestations of disorder on voltammetric responses, common experimental parameters that can be varied to interrogate sources of disorder, and finally, examples of different types of disorder and how they impact electrochemical responses.
RESUMEN
This work reports in situ (active) electrochemical control over the coupling strength between semiconducting nanoplatelets and a plasmonic cavity. We found that by applying a reductive bias to an Al nanoparticle lattice working electrode the number of CdSe nanoplatelet emitters that can couple to the cavity is decreased. Strong coupling can be reversibly recovered by discharging the lattice at oxidative potentials relative to the conduction band edge reduction potential of the emitters. By correlating the number of electrons added or removed with the measured coupling strength, we identified that loss and recovery of strong coupling are likely hindered by side processes that trap and/or inhibit electrons from populating the nanoplatelet conduction band. These findings demonstrate tunable, external control of strong coupling and offer prospects to tune selectivity in chemical reactions.
RESUMEN
Ligand-to-metal charge transfer (LMCT) excited states are capable of undergoing a wide array of photochemical reactions, yet receive minimal attention compared to other charge transfer excited states. This work provides general criteria for designing transition metal complexes that exhibit low energy LMCT excited states and routes to drive photochemistry from these excited states. General design principles regarding metal identity, oxidation state, geometry, and ligand sets are summarized. Fundamental photoreactions from these states including visible light-induced homolysis, excited state electron transfer, and other photoinduced chemical transformations are discussed and key design principles for enabling these photochemical reactions are further highlighted. Guided by these fundamentals, this review outlines critical considerations for the future design and application of coordination complexes with LMCT excited states.
RESUMEN
A high-surface-area p-type porous Si photocathode containing a covalently immobilized molecular Re catalyst is highly selective for the photoelectrochemical conversion of CO2 to CO. It gives Faradaic efficiencies of up to 90% for CO at potentials of -1.7 V (versus ferrocenium/ferrocene) under 1 sun illumination in an acetonitrile solution containing phenol. The photovoltage is approximately 300 mV based on comparisons with similar n-type porous Si cathodes in the dark. Using an estimate of the equilibrium potential for CO2 reduction to CO under optimized reaction conditions, photoelectrolysis was performed at a small overpotential, and the onset of electrocatalysis in cyclic voltammograms occurred at a modest underpotential. The porous Si photoelectrode is more stable and selective for CO production than the photoelectrode generated by attaching the same Re catalyst to a planar Si wafer. Further, facile characterization of the porous Si-based photoelectrodes using transmission mode FTIR spectroscopy leads to highly reproducible catalytic performance.
RESUMEN
Cobalt polypyridyl complexes stand out as efficient catalysts for electrochemical proton reduction, but investigations into their operating mechanisms, with broad-reaching implications in catalyst design, have been limited. Herein, we investigate the catalytic activity of a cobalt(II) polypyridyl complex bearing a pendant pyridyl base with a series of organic acids spanning 20 pKa units in acetonitrile. Structural analysis, as well as electrochemical studies, reveals that the Co(III) hydride intermediate is formed through reduction of the Co(II) catalyst followed by direct metal protonation in the initial EC step despite the presence of the pendant base, which is commonly thought of as a more kinetically accessible protonation site. Protonation of the pendant base occurs after the Co(III) hydride intermediate is further reduced in the overall ECEC pathway. Additionally, when the acid used is sufficiently strong, the Co(II) catalyst can be protonated, and the Co(III) hydride can react directly with acid to release H2. With thorough mechanistic understanding, the appropriate electroanalytical methods were identified to extract rate constants for the elementary steps over a range of conditions. Thermodynamic square schemes relating catalytic intermediates proposed in the three electrocatalytic HER mechanisms were constructed. These findings reveal a full description of the HER electrocatalysis mediated by this molecular system and provide insights into strategies to improve synthetic fuel-forming catalysts operative through metal hydride intermediates.
RESUMEN
Accessing semiconductor nanocrystals free from surface defects is an outstanding challenge in the design of materials with targeted properties. Despite the established importance of Z-type ligand surface passivation to eliminate defects, the optical and electronic properties of nanocrystals vary depending on the nanocrystal composition and Z-type ligand identity. In this work, a series of Cd-, Zn-, and Pb-based non-native Z-type ligands with the formula MX2 (X = undecylenate or chloride) were employed to elucidate Z-type ligand characteristics that result in surface passivation of undercoordinated surface ions to eliminate trap states from CdSe nanocrystals. First, CdSe nanocrystals were reacted with N,N,N',N'-tetramethylethylene-1,2-diamine (TMEDA) to remove native Cd(oleate)2 Z-type ligands from the surface, resulting in undercoordinated surface chalcogen ions. After subsequent reaction with M(UDA)2, ligands bound to the surface were quantified by NMR spectroscopy, and in parallel, the impact of Z-type ligands on the nanocrystal optical properties was monitored using photoluminescence spectroscopy. We find that Cd- and Zn-based Z-type ligands exhibit similar reactivity with the nanocrystal surface via NMR spectroscopy, yet Cd(UDA)2 passivation results in an 800% PL increase while Zn(UDA)2 passivation yields a 13% increase in photoluminescence intensity. Nanocrystals reacted with Pb-based Z-type ligands have lower surface coverage, as quantified by NMR spectroscopy, and lead to only a marginal increase of nanocrystal photoluminescence intensity (60%). These data indicate that the metal identity of the Z-type ligand has a profound impact on the reactivity and resulting electronic structure of the postsynthetically modified nanocrystal. This work provides a framework for achieving defect-free CdSe nanocrystals.
RESUMEN
The electronic structure and photophysics of two low spin metallocenes, decamethylmanganocene (MnCp*2) and decamethylrhenocene (ReCp*2), were investigated to probe their promise as photoredox reagents. Computational studies support the assignment of 2E2 ground state configurations and low energy ligand-to-metal charge transfer transitions for both complexes. Weak emission is observed at room temperature for ReCp*2 with τ = 1.8 ns in pentane, whereas MnCp*2 is not emissive. Calculation of the excited state reduction potentials for both metallocenes reveal their potential potency as excited state reductants (E°'([MnCp*2]+/0*) = -3.38 V and E°'([ReCp*2]+/0*) = -2.61 V vs Fc+/0). Comparatively, both complexes exhibit mild potentials for photo-oxidative processes (E°'([MnCp*2]0*/-) = -0.18 V and E°'([ReCp*2]0*/-) = -0.20 V vs Fc+/0). These results showcase the rich electronic structure of low spin d5 metallocenes and their promise as excited state reductants.
RESUMEN
Proton transfer reactions involving transition metal hydride complexes are prevalent in a number of catalytic fuel-forming reactions, where the proton transfer kinetics to or from the metal center can have significant impacts on the efficiency, selectivity, and stability associated with the catalytic cycle. This review correlates the often slow proton transfer rate constants of transition metal hydride complexes to their electronic and structural descriptors and provides perspective on how to exploit these parameters to control proton transfer kinetics to and from the metal center. A toolbox of techniques for experimental determination of proton transfer rate constants is discussed, and case studies where proton transfer rate constant determination informs fuel-forming reactions are highlighted. Opportunities for extending proton transfer kinetic measurements to additional systems are presented, and the importance of synergizing the thermodynamics and kinetics of proton transfer involving transition metal hydride complexes is emphasized.
RESUMEN
ConspectusMany desirable and undesirable properties of semiconductor nanocrystals (NCs) can be traced to the NC surface due to the large surface-to-volume ratio. Therefore, precise control of the NC surface is imperative to achieve NCs with the desired qualities. Ligand-specific reactivity and surface heterogeneity make it difficult to accurately control and tune the NC surface. Without a molecular-level appreciation of the NC surface chemistry, modulating the NC surface is impossible and the risk of introducing deleterious surface defects is imminent. To gain a more comprehensive understanding of the surface reactivity, we have utilized a variety of spectroscopic techniques and analytical methods in concert.This Account describes our use of robust characterization techniques and ligand exchange reactions in effort to establish a molecular-level understanding of NC surface reactivity. The utility of NCs in target applications such as catalysis and charge transfer hangs on precise tunability of NC ligands. Modulating the NC surface requires the necessary tools to monitor chemical reactions. One commonly utilized analytical method to achieve targeted surface compositions is 1H nuclear magnetic resonance (NMR) spectroscopy. Here we describe our use of 1H NMR spectroscopy to monitor chemical reactions at CdSe and PbS NC surfaces to identify ligand specific reactivity. However, seemingly straightforward ligand exchange reactions can vary widely depending on the NC materials and anchoring group. Some non-native X-type ligands will irreversibly displace native ligands. Other ligands exist in equilibrium with native ligands. Depending on the application, it is important to understand the nature of exchange reactions. This level of understanding can be obtained by extracting exchange ratios, exchange equilibrium, and reaction mechanism information from 1H NMR spectroscopy to establish precise NC reactivity.Reactivity that occurs through multiple, parallel ligand exchange mechanisms can involve both the liberation of metal-based Z-type ligands in addition to reactivity of X-type ligands. In these reactions, 1H NMR spectroscopy fails to discern between an X-type oleate or a Z-type Pb(oleate)2 because only the alkene resonance of the organic constituent is probed by this method. Multiple, parallel reaction pathways occur when thiol ligands are introduced to oleate-capped PbS NCs. This necessitated the use of synergistic characterization methods including 1H NMR spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, and inductively coupled plasma mass spectrometry (ICP-MS) to characterize both surface-bound and liberated ligands.Similar analytical methods have been employed to probe the NC topology, which is an important, but often overlooked, component to NC reactivity given the facet-specific reactivity of PbS NCs. Through the tandem use of NMR spectroscopy and ICP-MS, we have monitored the liberation of Pb(oleate)2 as an L-type ligand is titrated to the NC to determine the quantity and equilibrium of Z-type ligands. By studying a variety of NC sizes, we correlated the number of liberated ligands with the size-dependent topology of PbS NCs.Lastly, we incorporate redox-active chemical probes into our toolbox to study NC surface defects. We describe how the site-specific reactivity and relative energetics of redox-active surface-based defects are elucidated using redox probes and show that this reactivity is highly dependent on the surface composition. This Account is designed to encourage readers to consider the necessary characterization techniques needed establish a molecular-level understanding of NC surfaces in their own work.
RESUMEN
Photovoltages for hydrogen-terminated p-Si(111) in an acetonitrile electrolyte were quantified with methyl viologen [1,1'-(CH3)2-4,4'-bipyridinium](PF6)2, abbreviated MV2+, and [Ru(bpy)3](PF6)2, where bpy is 2,2'-bipyridine, that respectively undergo two and three one-electron transfer reductions. The reduction potentials, E°, of the two MV2+ reductions occurred at energies within the forbidden bandgap, while the three [Ru(bpy)3]2+ reductions occurred within the continuum of conduction band states. Bandgap illumination resulted in reduction that was more positive than that measured with a degenerately doped n+-Si demonstrative of a photovoltage, Vph, that increased in the order MV2+/+ (260 mV) < MV+/0 (400 mV) < Ru2+/+ (530 mV) â¼ Ru+/0 (540 mV) â¼ Ru0/- (550 mV). Pulsed 532 nm excitation generated electron-hole pairs whose dynamics were nearly constant under depletion conditions and increased markedly as the potential was raised or lowered. A long wavelength absorption feature assigned to conduction band electrons provided additional evidence for the presence of an inversion layer. Collectively, the data reveal that the most optimal photovoltage, as well as the longest electron-hole pair lifetime and the highest surface electron concentration, occurs when E° lies energetically within the unfilled conduction band states where an inversion layer is present. The bell-shaped dependence for electron-hole pair recombination with the surface potential was predicted by the time-honored SRH model, providing a clear indication that this interface provides access to all four bias conditions, i.e., accumulation, flat band, depletion, and inversion. The implications of these findings for photocatalysis applications and solar energy conversion are discussed.
RESUMEN
When irradiated with blue light in the presence of a Lewis base (L), [CpW(CO)3]2 undergoes metal-metal bond cleavage followed by a disproportionation reaction to form [CpW(CO)3L]+ and [CpW(CO)3]-. Here, we show that in the presence of pyridinium tetrafluoroborate, [CpW(CO)3]- reacts further to form a metal hydride complex CpW(CO)3H. The rection was monitored through in situ photo 1H NMR spectroscopy experiments and the mechanism of light-driven hydride formation was investigated by determining quantum yields of formation. Quantum yields of formation of CpW(CO)3H correlate with I-1/2 (I = photon flux on our sample tube), indicating that the net disproportionation of [CpW(CO)3]2 to form the hydride precursor [CpW(CO)3]- occurs primarily through a radical chain mechanism.
RESUMEN
A metal-to-ligand charge transfer with mixed intraligand character is observed for the rhenium hexakisarylisocyanide complex [Re(CNAr)6]PF6 (CNAr = 2,6-dimethylphenylisocyanide, λmax = 300 nm). Upon oxidation to [Re(CNAr)6](PF6)2, the dominant low energy optical transition is a ligand-to-metal charge transfer (LMCT) mixed with intraligand transitions (λmax = 650 nm). TD-DFT was used to identify the participating ligand-based orbitals in the LMCT transition, revealing that the majority of the donor orbital is based on the aryl ring (85%) as opposed to the CN bond (14%). For both [Re(CNAr)6]+ and [Re(CNAr)6]2+, structural characterization by X-ray diffraction reveals deviations from Oh geometry at the central Re ion, with larger reduction in symmetry observed for Re(II). For [Re(CNAr)6]+, these structural changes lead to a broadening of the strong ν(C≡N) stretch (2065 cm-1), as the degeneracy of the T1u IR-active mode is broken. Furthermore, a shoulder is observed for this ν(C≡N) stretch, resulting from deviation of the C-N-Ar bond from linearity. By contrast, [Re(CNAr)6]2+ has two weak bands in the ν(C≡N) region (2065 and 2121 cm-1). DFT calculations indicate that reduction of symmetry at the central rhenium ion manifests in the decrease in intensity and the observed split of the ν(C≡N) band. Stability of both complexes are limited by light-induced decomposition where Re(I) dissociates a isocyanide ligand upon irradiation and Re(II) absorbance decays under ambient light. These data provide new insights to the electronic structure of [Re(CNAr)6]2+, enhancing our understanding of LMCT excited states and the versatility of isocyanide ligands.
RESUMEN
A sonochemical-based hydrosilylation method was employed to covalently attach a rhenium tricarbonyl phenanthroline complex to silicon(111). fac-Re(5-(p-Styrene)-phen)(CO)3Cl (5-(p-styrene)-phen = 5-(4-vinylphenyl)-1,10-phenanthroline) was reacted with hydrogen-terminated silicon(111) in an ultrasonic bath to generate a hybrid photoelectrode. Subsequent reaction with 1-hexene enabled functionalization of remaining atop Si sites. Attenuated total reflectance-Fourier transform infrared spectroscopy confirms attachment of the organometallic complex to silicon without degradation of the organometallic core, supporting hydrosilylation as a strategy for installing coordination complexes that retain their molecular integrity. Detection of Re(I) and nitrogen by X-ray photoelectron spectroscopy (XPS) further support immobilization of fac-Re(5-(p-styrene)-phen)(CO)3Cl. Cyclic voltammetry and electrochemical impedance spectroscopy under white light illumination indicate that fac-Re(5-(p-styrene)-phen)(CO)3Cl undergoes two electron reductions. Mott-Schottky analysis indicates that the flat band potential is 239 mV more positive for p-Si(111) co-functionalized with both fac-Re(5-(p-styrene)-phen)(CO)3Cl and 1-hexene than when functionalized with 1-hexene alone. XPS, ultraviolet photoelectron spectroscopy, and Mott-Schottky analysis show that functionalization with fac-Re(5-(p-styrene)-phen)(CO)3Cl and 1-hexene introduces a negative interfacial dipole, facilitating reductive photoelectrochemistry.
RESUMEN
Cobalamin has shown promise as a light-sensitive drug delivery platform owing to its ease of modification and the high quantum yields for drug photorelease. However, studies to date on the general photochemistry of alkyl cobalamins have primarily focused on methyl and adenosyl-substituted derivatives, the natural cofactors present in various enzymatic species. We describe the synthesis and photolytic behavior of cobalamin conjugates comprised of different combinations of fluorophores and ß-axial ligands. In general, cobalamin conjugates containing ß-axial alkyl substituents undergo efficient photolysis under aqueous conditions, with quantum yields up to >40%. However, substituents that are large and hydrophobic, or unable to readily support the presumed radical intermediate, suffer less efficient photolysis (<15%) than smaller, water-soluble, analogs. By contrast, quantum yields improve by 2-fold in DMF for cobalamins containing large hydrophobic ß-axial substituents. This suggests that drug release from carriers comprised of membranous compartments, such as liposomes, may be significantly more efficient than the corresponding photorelease in an aqueous environment. Finally, we explored the impact of fluorophores on the photolysis of alkyl cobalamins under tissue-mimetic conditions. Cobalamins substituted with efficient photon-capturing fluorophores display up to 4-fold enhancements in photolysis relative to unsubstituted derivatives. In summary, we have shown that the photosensitivity of alkyl cobalamin conjugates can be tuned by altering the Co-appended alkyl moiety, modulating the polarity of the environment (solvent), and installing photon-capturing fluorophores onto the cobalamin framework.
Asunto(s)
Colorantes Fluorescentes , Vitamina B 12 , Colorantes Fluorescentes/química , Ligandos , Fotólisis , Vitamina B 12/química , AguaRESUMEN
The ligand-to-metal charge transfer (LMCT) transitions of [Re(dmpe)3]2+ (dmpe = bis-1,2-(dimethylphosphino)ethane) were interrogated using UV/Vis absorbance spectroscopy, photoluminescence spectroscopy, and time-dependent density functional theory. The solvent dependence of the lowest energy charge transfer transition was quantified; no solvatochromism was observed. TD-DFT calculations reveal the dominant LMCT transition is highly symmetric and delocalized involving all phopshine ligand donors in the charge transfer, providing an understanding for the absence of solvatochromism of [Re(dmpe)3]2+.
Asunto(s)
Compuestos Organometálicos , Renio , Ligandos , Compuestos Organometálicos/química , Teoría Cuántica , Renio/química , Análisis EspectralRESUMEN
Two-electron, one-proton reactions of a family of [CoCp(dxpe)(NCCH3)]2+ complexes (Cp = cyclopentadienyl, dxpe = 1,2-bis(di(aryl/alkyl)phosphino)ethane) form the corresponding hydride species [HCoCp(dxpe)]+ (dxpe = dppe (1,2-bis(diphenylphosphino)ethane), depe (1,2-bis(diethylphosphino)ethane), and dcpe (1,2-bis(dicyclohexylphosphino)ethane)) through a stepwise proton-coupled electron transfer process. For three [CoCp(dxpe)(NCCH3)]2+ complexes, peak shift analysis was employed to quantify apparent proton transfer rate constants from cyclic voltammograms recorded with acids ranging 22 pKa units. The apparent proton transfer rate constants correlate with the strength of the proton source for weak acids, but these apparent proton transfer rate constants curiously plateau (kpl) as the reaction becomes increasingly exergonic. The absolute apparent proton transfer rate constants across both these regions correlate with the steric bulk of the chelating diphosphine ligand, with bulkier ligands leading to slower kinetics (kplateau,depe = 3.5 × 107 M-1 s-1, kplateau,dppe = 1.7 × 107 M-1 s-1, kplateau,dcpe = 7.1 × 104 M-1 s-1). Mechanistic studies were conducted to identify the cause of the aberrant kPTapp-ΔpKa trends. When deuterated acids are employed, deuterium incorporation in the Cp ring is observed, indicating protonation of the CoCp(dxpe) species to form the corresponding hydride proceeds via initial ligand protonation. Digital simulations of cyclic voltammograms show ligand loss accompanying initial reduction gates subsequent PCET activity at higher driving forces. Together, these experiments reveal the details of the reaction mechanism: reduction of the Co(III) species is followed by dissociation of the bound acetonitrile ligand, subsequent reduction of the unligated Co(II) species to form a Co(I) species is followed by protonation, which occurs at the Cp ring, followed by tautomerization to generate the stable Co(III)-hydride product [HCoCp(dxpe)]+. Analysis as a function of chelating disphosphine ligand, solvent, and acid strength reveals that the ligand dissociation equilibrium is directly influenced by the steric bulk of the phosphine ligands and gates protonation, giving rise to the plateau of the apparent proton transfer rate constant with strong acids. The complexity of the reaction mechanism underpinning hydride formation, encompassing dynamic behavior of the entire ligand set, highlights the critical need to understand elementary reaction steps in proton-coupled electron transfer reactions.
Asunto(s)
Cobalto/química , Complejos de Coordinación/síntesis química , Electrones , Hidrógeno/química , Protones , Técnicas Electroquímicas , Cinética , Ligandos , Oxidación-Reducción , Fosfinas/químicaRESUMEN
Semiconductor nanocrystals exhibit attractive photophysical properties for use in a variety of applications. Advancing the efficiency of nanocrystal-based devices requires a deep understanding of the physical defects and electronic states that trap charge carriers. Many of these states reside at the nanocrystal surface, which acts as an interface between the semiconductor lattice and the molecular capping ligands. While a detailed structural and electronic understanding of the surface is required to optimize nanocrystal properties, these materials are at a technical disadvantage: unlike molecular structures, semiconductor nanocrystals lack a specific chemical formula and generally must be characterized as heterogeneous ensembles. Therefore, in order for the field to improve current nanocrystal-based technologies, a creative approach to gaining a "molecular-level" picture of nanocrystal surfaces is required. To this end, an expansive toolbox of experimental and computational techniques has emerged in recent years. In this Perspective, we critically evaluate the insight into surface structure and reactivity that can be gained from each of these techniques and demonstrate how their strategic combination is already advancing our molecular-level understanding of nanocrystal surface chemistry.
RESUMEN
Real materials are disordered. This disorder influences the properties of these materials and the chemical processes that occur at their interfaces. Gaining a molecular-level understanding of the underlying physical manifestations caused by disordered materials is crucial to unraveling and ultimately controlling the efficiency and performance of these materials in a range of energy-related devices. This understanding necessitates measurement techniques through which disorder can be detected, quantified, and monitored. However, such quantitative measurements are notoriously difficult, as effects often average out in ensemble measurements. In this work, we describe how a combination of electrochemical and spatially resolved surface spectroscopy measurements illuminate a molecular-level picture of disorder in materials. Using amorphous carbon as an intrinsically disordered material, we covalently attached a monolayer of ferrocene. Interfacial electron transfer across the amorphous carbon-ferrocene interface is highly sensitive to disruptions of order. By systematically varying linker properties and surface loadings, the influence of lateral interactions between nonuniformly distributed ferrocene headgroups on ensemble electrochemical measurements is demonstrated. Electrochemical and imaging data collectively indicate that conformational flexibility of the ferrocene moieties provides a mechanism to elude repulsive and unbalanced lateral interactions, while rigid linkages provide direct information about the underlying disorder of the material. This study is the first of its kind to quantify and visualize molecular disorder and heterogeneity with an experimental model accessed through ensemble measurements.
RESUMEN
Rotating disc electrode (RDE) voltammetry has been widely adopted for the study of heterogenized molecular electrocatalysts for multi-step fuel-forming reactions but this tool has never been comprehensively applied to their homogeneous analogues. Here, the utility and limitations of RDE techniques for mechanistic and kinetic analysis of homogeneous molecular catalysts that mediate multi-electron, multi-substrate redox transformations are explored. Using the ECEC' reaction mechanism as a case study, two theoretical models are derived based on the Nernst diffusion layer model and the Hale transformation. Current-potential curves generated by these computational strategies are compared under a variety of limiting conditions to identify conditions under which the more minimalist Nernst Diffusion Layer approach can be applied. Based on this theoretical treatment, strategies for extracting kinetic information from the plateau current and the foot of the catalytic wave are derived. RDEV is applied to a cobaloxime hydrogen evolution reaction (HER) catalyst under non-aqueous conditions in order to experimentally validate this theoretical framework and explore the feasibility of RDE as a tool for studying homogeneous catalysts. Crucially, analysis of the foot-of-the-wave via this theoretical framework provides rate constants for elementary reaction steps that agree with those extracted from stationary voltammetric methods, supporting the application of RDE to study homogeneous fuel-forming catalysts. Finally, obstacles encountered during the kinetic analysis of cobaloxime, along with the voltammetric signatures used to diagnose this reactivity, are discussed with the goal of guiding groups working to improve RDE set-ups and help researchers avoid misinterpretation of RDE data.