FeCo@hydrochar nanocomposites as efficient peroxymonosulfate activator for organic pollutant degradation.

Sulfate radical-based advanced oxidation processes (SR-AOPs) are renowned for their exceptional capacity to degrade refractory organic pollutants due to their wide applicability, cost-effectiveness, and swift mineralization and oxidation rates. The primary sources of radicals in AOPs are persulfate (PS) and peroxymonosulfate (PMS) ions, sparking significant interest in their mechanistic and catalytic aspects. To develop a novel nanocatalyst for SR-AOPs, particularly for PMS activation, we synthesized carbon-coated FeCo nanoparticles (NPs) using solvothermal methods based on the polyol approach. Various synthesis conditions were investigated, and the NPs were thoroughly characterized regarding their structure, morphology, magnetic properties, and catalytic efficiency. The FeCo phase was primarily obtained at [OH-] / [Metal] = 26 and [Fe] / [Co] = 2 ratios. Moreover, as the [Fe]/[Co] ratio increased, the degree of xylose carbonization to form a carbon coating (hydrochar) on the NPs also increased. The NPs exhibited a spherical morphology with agglomerates of varying sizes. Vibrating-sample magnetometer analysis (VSM) indicated that a higher proportion of iron resulted in NPs with higher saturation magnetization (up to 167.8 emu g-1), attributed to a larger proportion of FeCo bcc phase in the nanocomposite. The best catalytic conditions for degrading 100 ppm Rhodamine B (RhB) included 0.05 g L-1 of NPs, 2 mM PMS, pH 7.0, and a 20-min reaction at 25 °C. Notably, singlet oxygen was the predominant specie formed in the experiments in the SR-AOP, followed by sulfate and hydroxyl radicals. The catalyst could be reused for up to five cycles, retaining over 98% RhB degradation, albeit with increased metal leaching. Even in the first use, dissolved Fe and Co concentrations were 0.8 ± 0.3 and 4.0 ± 0.5 mg L-1, respectively. The FeCo catalyst proved to be effective in dye degradation and offers the potential for further refinement to minimize Co2+ leaching.

Xyloglucan-based hybrid nanocomposite with potential for biomedical applications.

Natural polymer-based hybrid nanocomposites have been proposed as one of the most promising tools for biomedical applications, including disease treatment and diagnosis procedures. Xyloglucan nanocapsules can simultaneously load magnetic iron oxide nanoparticles and bioactive for a specific tissue, reducing the processes of degradation and metabolic inactivation of molecules with biological activity. In this work, magnetic nanocapsules of xyloglucan loaded with hydrophilic sulfated quercetin (MNXQ_SO3) were successfully synthesized by inverse miniemulsion process through interfacial polymerization. The polymeric shell formation of nanocapsules was evidenced by Fourier Transform Infrared spectroscopy and Transmission Electron Microscopy. The ferrofluid (Fe3O4@PAAS) incorporated into the xyloglucan nanocapsules was synthesized by hydrothermal method, using polyacrylic acid sodium salt as coating. Dynamic Light Scattering technique confirmed the nanomeric dimensions (202.3 nm) and the good colloidal stability (-40.2 mV) of MNXQ_SO3. The saturation magnetization analyses pointed out the superparamagnetic behavior of Fe3O4@PAAS (48 emu/g) and MNXQ_SO3 (4.2 emu/g). MNXQ_SO3 was able to modify the release profile of sulfated quercetin (67%) when compared to the free bioactive (100%), exhibiting a release profile compatible with the zero-order kinetic model. The results showed that the development of MNXQ_SO3 presents a new perspective for biomedical applications, including studies of targeted drug delivery.