Observing Discrete Blocking Events at a Polarized Micro- or Submicro-Liquid/Liquid Interface.

Single-entity collisional electrochemistry (SECE), a subfield of single-entity electrochemistry, enables directly characterizing entities and particles in the electrolyte solution at the single-entity resolution. Blockade SECE at the traditional solid ultramicroelectrode (UME)/electrolyte interface suffers from a limitation: only redox-inactive particles can be studied. The wide application of the classical Coulter counter is restricted by the rapid translocation of entities through the orifice, which results in a remarkable proportion of undetected signals. In response, the blocking effect of single charged conductive or insulating nanoparticles (NPs) at low concentrations for ion transfer (IT) at a miniaturized polarized liquid/liquid interface was successfully observed. Since the particles are adsorbed at the liquid/liquid interface, our method also solves the problem of the Coulter counter having a too-fast orifice translocation rate. The decreasing quantal staircase/step current transients are from landings (controlled by electromigration) of either conductive or insulating NPs onto the interface. This interfacial NP assembly shields the IT flux. The size of each NP can be calculated by the step height. The particle size measured by dynamic light scattering (DLS) is used for comparison with that calculated from electrochemical blocking events, which is in fairly good agreement. In short, the blocking effect of IT by single entities at micro- or submicro-liquid/liquid interface has been proven experimentally and is of great reference in single-entity detection.

Insight into oxygen reduction activity and pathway on pure titanium using scanning electrochemical microscopy and theoretical calculations.

HYPOTHESIS: Unlike noble metals, the oxygen reduction reaction (ORR) behavior on Ti is more complicated due to its spontaneously formed oxide film. This film results in sluggish ORR kinetics and tends to be reduced within ORR potential region, causing the weak and multi-reaction coupled current. Though Ti is being used in chemical and biological fields, its ORR research is still underexplored. EXPERIMENTS: We innovatively employed the modified reactive tip generation-substrate collection (RTG/SC) mode of scanning electrochemical microscopy (SECM) with high efficiency of 97.2 % to quantitatively study the effects of film characteristics, solution environment (pH, anion, dissolved oxygen), and applied potential on the ORR activity and selectivity of Ti. Then, density functional theory (DFT) and molecular dynamics (MD) analyses were employed to elucidate its ORR behavior. FINDINGS: On highly reduced Ti, film properties dominate ORR behavior with promoted 4e- selectivity. Rapid film regeneration in alkaline/O2-saturated conditions inhibits ORR activity. Besides, ORR is sensitive to anion species in neutral solutions while showing enhanced 4e- reduction in alkaline media. All the improved 4e- selectivities originate from the hydrogen bond/electrostatic stabilization effect, while the decayed ORR activity by Cl- arises from the suppressed O2 adsorption. This work provides theoretical support and possible guidance for ORR research on oxide-covered metals.

Quantized Collision/Fusion Events of Anionic Ionosomes at a Polarized Soft Micro-Interface.

Single-entity collisional electrochemistry (SECE) can capture physicochemical information at the single entity level. In the present work, we systematically studied in-situ generation and detection of single anionic ionosomes via SECE combined with a miniaturized interface between two immiscible electrolyte solutions (ITIES). Ionosome is an ionic-bilayer encapsulated nanoscopic water cluster/droplet that carries a net charge. Discrete spiky ionic currents were observed upon collisions/fusions of individual F- or Cl- -ionosomes with a positively polarized micro-ITIES. This fusion process was proved to follow the bulk electrolysis model. With this method, some essential factors such as concentration and charge density of the hydrated anions, and the interfacial area, were revealed. It demonstrates that anionic ionosomes share a common theoretical framework with their counterparts (i. e., cationic ionosomes, like Li+ -ionosomes). This work will spur the advancements in a myriad of fields, including such as the colloid and interface science, micro- and/or nanoscale electrochemistry, and electrophysiology and brain sciences.

Faradaic Counter for Liposomes Loaded with Potassium, Sodium Ions, or Protonated Dopamine.

Collisional electrochemistry between single particles and a biomimetic polarized micro-liquid/liquid interface has emerged as a novel and powerful analytical method for measurements of single particles. Using this platform, rapid detection of liposomes at the single particle level is reported herein. Individual potassium, sodium, or protonated dopamine-encapsulated (pristine or protein-decorated) liposomes collide and fuse with the polarized micro-liquid/liquid interface accompanying the release of ions, which are recorded as spike-like current transients of stochastic nature. The sizing and concentration of the liposomes can be readily estimated by quantifying the amount of encapsulated ions in individual liposomes via integrating each current spike versus time and the spike frequency, respectively. We call this type of nanosensing technology "Faradaic counter". The estimated liposome size distribution by this method is in line with the dynamic light scattering (DLS) measurements, implying that the quantized current spikes are indeed caused by the collisions of individual liposomes. The reported electrochemical sensing technology may become a viable alternative to DLS and other commercial nanoparticle analysis systems, for example, nanoparticle tracking analysis.

Ionosomes: Observation of Ionic Bilayer Water Clusters.

Emulsification of immiscible two-phase fluids, i.e., one condensed phase dispersed homogeneously as tiny droplets in an outer continuous medium, plays a key role in medicine, food, chemical separations, cosmetics, fabrication of micro- and nanoparticles and capsules, and dynamic optics. Herein, we demonstrate that water clusters/droplets can be formed in an organic phase via the spontaneous assembling of ionic bilayers. We term these clusters ionosomes, by analogy with liposomes where water clusters are encapsulated in a bilayer of lipid molecules. The driving force for the generation of ionosomes is a unique asymmetrical electrostatic attraction at the water/oil interface: small and more mobile hydrated ions reside in the inner aqueous side, which correlate tightly with the lipophilic bulky counterions in the adjacent outer oil side. These ionosomes can be formed through electrochemical (using an external power source) or chemical (by salt distribution) polarization at the liquid-liquid interface. The charge density of the cations, the organic solvent, and the synergistic effects between tetraethylammonium and lithium cations, all affecting the formation of ionosomes, were investigated. These results clearly prove that a new emulsification strategy is developed providing an alternative and generic platform, besides the canonical emulsification procedure with either ionic or nonionic surfactants as emulsifiers. Finally, we also demonstrate the detection of individual ionosomes via single-entity electrochemistry.

Ion Selective Detection Based on the Nuances of the Kinetic Fingerprint for Ion Transfer at Soft Interfaces.

A novel approach has been developed for the selective determination of cations or anions based on the application of Fourier transformed staircase sinusoidal voltammetry (FT-SC-SV) in combination with the interface between two immiscible electrolyte solutions (ITIES) in the four-electrode configuration. The electrochemistry at the ITIES provides a very simple yet sensitive platform for the detection of a broad spectrum of redox inactive ions and even the neutral (bio)molecules that can be charged (e.g., protonated in appropriate pH). FT-SC-SV employs a complex potential excitation, i.e., a large-amplitude sine wave superimposed onto a dc bias potential that is stepped/scanned throughout the potential window. The response current is subsequently analyzed in the frequency domain by FT. Although the ions have close standard/formal transfer potential, discrimination and selective detection can be achieved by the higher harmonics. Feasibility and reliability of the proposed approach were verified with two pairs of ions that have very close transfer potentials across the ITIES and were chosen as the model systems. Besides, the additivity of the ionic current magnitude on concentration measured either in the mixture of ionic analytes or in individually prepared solutions containing the separate ionic analyte was tested. The experimental results prove that the principle of additivity holds. Compared with the traditional voltammetry, FT-SC-SV is simpler and more efficient in discrimination and quantification of apparently indistinguishable ion transfer from the viewpoint of thermodynamics. This demonstration may provide a new way for analytical detection of a broad range of redox inactive ions in terms of both fundamentals and applications.

Electrochemical Dynamics of a Single Platinum Nanoparticle Collision Event for the Hydrogen Evolution Reaction.

Chronoamperometry was used to study the dynamics of Pt nanoparticle (NP) collision with an inert ultramicroelectrode via electrocatalytic amplification (ECA) in the hydrogen evolution reaction. ECA and dynamic light scattering (DLS) results reveal that the NP colloid remains stable only at low proton concentrations (1.0 mm) under a helium (He) atmosphere, ensuring that the collision events occur at genuinely single NP level. Amperometry of single NP collisions under a He atmosphere shows that each discrete current profile of the collision event evolves from spike to staircase at more negative potentials, while a staircase response is observed at all of the applied potentials under hydrogen-containing atmospheres. The particle size distribution estimated from the diffusion-controlled current in He agrees well with electron microscopy and DLS observations. These results shed light on the interfacial dynamics of the single nanoparticle collision electrochemistry.

Single Organic Droplet Collision Voltammogram via Electron Transfer Coupled Ion Transfer.

Single-emulsion toluene oil droplets (femtoliter) containing a hydrophobic redox probe that are dispersed in water stochastically collide with an ultramicroelectrode (UME). The fast-scan cyclic voltammetry (FSCV) or Fourier-transformed sinusoidal voltammetry (FTSV) is applied: the UME was scanned with a fast, repetitive triangular, or sinusoidal potential, and its current in time/frequency domains were monitored. The electron transfer at the UME/oil interface is coupled with ion transfer at the oil/water interface. Thus, the obtained transient voltammograms of a myriad of ions were used to estimate thermodynamics of ion transfer at the toluene/water interface. Additionally, the single-droplet voltammogram combined with finite element simulations reveal the droplet's size and shape distributions. Four collision mechanisms with new physical insights were also uncovered via comprehensive analysis of phase angle in the frequency domain, time domain FSCVs, and finite element simulations.

Probing Ion Transfer across Liquid-Liquid Interfaces by Monitoring Collisions of Single Femtoliter Oil Droplets on Ultramicroelectrodes.

We describe a method of observing collisions of single femtoliter (fL) oil (i.e., toluene) droplets that are dispersed in water on an ultramicroelectrode (UME) to probe the ion transfer across the oil/water interface. The oil-in-water emulsion was stabilized by an ionic liquid, in which the oil droplet trapped a highly hydrophobic redox probe, rubrene. The ionic liquid also functions as the supporting electrolyte in toluene. When the potential of the UME was biased such that rubrene oxidation would be possible when a droplet collided with the electrode, no current spikes were observed. This implies that the rubrene radical cation is not hydrophilic enough to transfer into the aqueous phase. We show that current spikes are observed when tetrabutylammonium trifluoromethanesulfonate or tetrahexylammonium hexafluorophosphate are introduced into the toluene phase and when tetrabutylammonium perchlorate is introduced into the water phase, implying that the ion transfer facilitates electron transfer in the droplet collisions. The current (i)-time (t) behavior was evaluated quantitatively, which indicated the ion transfer is fast and reversible. Furthermore, the size of these emulsion droplets can also be calculated from the electrochemical collision. We further investigated the potential dependence on the electrochemical collision response in the presence of tetrabutylammonium trifluoromethanesulfonate in toluene to obtain the formal ion transfer potential of tetrabutylammonium across the toluene/water interface, which was determined to be 0.754 V in the inner potential scale. The results yield new physical insights into the charge balance mechanism in emulsion droplet collisions and indicate that the electrochemical collision technique can be used to probe formal ion transfer potentials between water and solvents with very low (ε < 5) dielectric constants.

A Snapshot of the Properties of Single Nanoparticles at the Moment of a Collision.

Direct electrochemical characterization of freely moving nanoparticles (NPs) at the individual particle level is challenging. A method is presented that can achieve this goal based on the collision between a NP and an ultramicroelectrode (UME). By applying a sinusoidal potential to the UME and monitoring the current response in the frequency domain, a sudden change in the phase angle indicates the arrival of a NP at the UME. The response induced by the collision can be isolated and used to explore the properties of the NP. This method, analogous to a high-speed camera, can obtain a snapshot of the properties of the single NP at the moment of a collision. The proposed method was employed to investigate the properties of both the hard catalytic Pt NP and soft electroactive emulsion droplets, and many new insights were revealed thereafter. The method also has the potential to be applied in many other fields, where the interested signals appear as discrete events.

Analyzing Benzene and Cyclohexane Emulsion Droplet Collisions on Ultramicroelectrodes.

We report the collisions of single emulsion oil droplets with extremely low dielectric constants (e.g., benzene, ε of 2.27, or cyclohexane, ε of 2.02) as studied via emulsion droplet reactor (EDR) on an ultramicroelectrode (UME). By applying appropriate potentials to the UME, we observed the electrochemical effects of single-collision signals from the bulk electrolysis of single emulsion droplets. Different hydrophobic redox species (ferrocene, decamethyl-ferrocene, or metalloporphyrin) were trapped in a mixed benzene (or cyclohexane) oil-in-water emulsion using an ionic liquid as the supporting electrolyte and emulsifier. The emulsions were prepared using ultrasonic processing. Spike-like responses were observed in each i-t response due to the complete electrolysis of all of the above-mentioned redox species within the droplet. On the basis of these single-particle collision results, the collision frequency, size distribution, i-t decay behavior of the emulsion droplets, and possible mechanisms are analyzed and discussed. This work demonstrated that bulk electrolysis can be achieved in a few seconds in these attoliter reactors, suggesting many applications, such as analysis and electrosynthesis in low dielectric constant solvents, which have a much broader potential window.

Surprising acidity of hydrated lithium cations in organic solvents.

Lithium cations are shown to have a significant role in catalyzing oxygen and proton reduction along with S(N)1 reactions in biphasic systems. We propose that this catalytic effect is due to the surprising acidity of the hydrated cations; interactions between the cation and its surrounding solvation shell will make the constituent water molecules more acidic.

Conductive gold nanoparticle mirrors at liquid/liquid interfaces.

Gold nanoparticle (Au NP) mirrors, which exhibit both high reflectance and electrical conductance, were self-assembled at a [heptane + 1,2-dichloroethane]/water liquid/liquid interface. The highest reflectance, as observed experimentally and confirmed by finite difference time domain calculations, occurred for Au NP films consisting of 60 nm diameter NPs and approximate monolayer surface coverage. Scanning electrochemical microscopy approach curves over the interfacial metallic NP films revealed a transition from an insulating to a conducting electrical material on reaching a surface coverage at least equivalent to the formation of a single monolayer. Reflectance and conductance transitions were interpreted as critical junctures corresponding to a surface coverage that exceeded the percolation threshold of the Au NP films at the [heptane + 1,2-dichloroethane]/water interface.

Artificial photosynthesis at soft interfaces.

The concept of artificial photosynthesis at a polarised liquid membrane is presented. It includes two photosystems, one at each interface for the hydrogen and oxygen evolution respectively. Both reactions involve proton coupled electron transfer reactions, and some ultrafast steps at the photosensitization stage.

A simultaneous study of kinetics and thermodynamics of anion transfer across the liquid/liquid interface by means of Fourier transformed large-amplitude square-wave voltammetry at three-phase electrode.

This paper describes a novel application of Fourier transformed large-amplitude square-wave voltammetry (FT-SWV) in combination with three-phase edge plane pyrolytic graphite (EPPG) electrode to investigate both the kinetics and thermodynamics of anion transfer across the liquid/liquid interface using a conventional three-electrode arrangement. The transfer of anion from aqueous phase to organic phase was electrochemically driven by reversible redox transformation of confined redox probe in the organic phase. The kinetics and thermodynamics of anion transfer were inspected by a so-called "quasi-reversible maximum" (QRM) emerged in the profile of even harmonic components of power spectrum obtained by Fourier transformation (FT) of time-domain total current response and formal potential E(f) of first harmonic voltammogram obtained by application of inverse FT on the power spectrum. Besides, a systematic study of patterns of behavior of a variety of anions at the same concentration and a specific anion at different concentrations on kinetics and thermodynamics and the effect of amplitude ΔE on QRM were also conducted, aiming to optimize the measurement conditions. The investigation mentioned above testified that the ion transfer across the liquid/liquid interface controls the kinetics of overall electrochemical process, regardless of either FT-SWV or traditional SWV investigation. Moreover, either the kinetic probe f(max) or the thermodynamic probe E(f) can be served as a way for analytical applications. Interestingly, a linear relationship between peak currents of the first harmonic components and concentrations of perchlorate anion in the aqueous solutions can be observed, which is somewhat in accordance with a finding obtained by Fourier transformed alternating current voltammetry (FT-ACV) [Bond, A. M.; Duffy, N. W.; Elton, D. M.; Fleming, B. D. Anal. Chem. 2009, 81, 8801-8808]. This may open a new door for analytical detection of a wide spectrum of electrochemically inactive analytes of biological and environmental significance. Compared with traditional SWV, FT-SWV is much simpler and faster in ion transfer kinetics estimation and also provides a new access to thermodynamics evaluation.