Alcohol-Processable All-Polymer n-Type Thermoelectrics.

The general strategy for n-type organic thermoelectric is to blend n-type conjugated polymer hosts with small molecule dopants. In this work, all-polymer n-type thermoelectric is reported by dissolving a novel n-type conjugated polymer and a polymer dopant, poly(ethyleneimine) (PEI), in alcohol solution, followed by spin-coating to give polymer host/polymer dopant blend film. To this end, an alcohol-soluble n-type conjugated polymer is developed by attaching polar and branched oligo (ethylene glycol) (OEG) side chains to a cyano-substituted poly(thiophene-alt-co-thiazole) main chain. The main chain results in the n-type property and the OEG side chain leads to the solubility in hexafluorineisopropanol (HFIP). In the polymer host/polymer dopant blend film, the Coulombic interaction between the dopant counterions and the negatively charged polymer chains is reduced and the ordered stacking of the polymer host is preserved. As a result, the polymer host/polymer dopant blend exhibits the power factor of 36.9 µW m-1 K-1, which is one time higher than that of the control polymer host/small molecule dopant blend. Moreover, the polymer host/polymer dopant blend shows much better thermal stability than the control polymer host/small molecule dopant blend. This research demonstrates the high performance and excellent stability of all-polymer n-type thermoelectric.

High-Performance and Ecofriendly Organic Thermoelectrics Enabled by N-Type Polythiophene Derivatives with Doping-Induced Molecular Order.

The ability of n-type polymer thermoelectric materials to tolerate high doping loading limits further development of n-type polymer conductivity. Herein, two alcohol-soluble n-type polythiophene derivatives that are n-PT3 and n-PT4 are reported. Due to the ability of two polymers to tolerate doping loading more significantly than 100 mol%, both achieve electrical conductivity >100 S cm-1 . Moreover, the conductivity of both polythiophenes remains almost constant at high doping concentrations with excellent doping tunability, which may be related to their ability to overcome charging-induced backbone torsion and morphology change caused by saturated doping. The characterizations reveal that n-PT4 has a high doping level and carrier concentration (>3.10 × 1020  cm-3 ), and the carrier concentration continues to increase as the doping concentration increases. In addition, doping leads to improved crystal structure of n-PT4, and the crystallinity does not decrease significantly with increasing doping concentration; even the carrier mobility increases with it. The synergistic effect of these two leads to both n-PT3 and n-PT4 achieving a breakthrough of 100 in conductivity and power factor. The DMlmC-doped n-PT4 achieves a power factor of over 150 µW m-1  K-2 . These values are among the highest for n-type organic thermoelectric materials.

A Highly Conductive n-Type Polythiophene Derivative: Effect of Molecular Weight on n-Doping Behavior and Thermoelectric Performance.

Here, we examine the impact of the molecular weight of an n-type conjugated polymer (n-PT2) on molecular doping and thermoelectric parameters. Two common dopants TDAE and N-DMBI with different doping mechanisms are used for molecular doping of n-PT2. It turns out that n-PT2 with a higher molecular weight is more miscible with the dopant, leading to more charge carriers. Moreover, the crystal structures and morphology of n-PT2 with a higher molecular weight are more tolerant against the intrusion of dopant molecules and charging. Finally, these factors work in synergy to endow the doped n-PT2 with the best conductivity and power factor (144 S cm-1/75.0 µW m-1 K-2 and 75.4 S cm-1/98.5 µW m-1 K-2 after doping by TDAE and N-DMBI, respectively). This study indicates that regulating the molecular weight allows for synergistic regulation of conductivity and Seebeck coefficient and is a feasible means to improve the performance for a given n-type organic thermoelectric material.

An n-Type Polythiophene Derivative with Excellent Thermoelectric Performance.

Typical n-type conjugated polymers are based on fused-ring electron-accepting building blocks. Herein, we report a non-fused-ring strategy to design n-type conjugated polymers, i.e. introducing electron-withdrawing imide or cyano groups to each thiophene unit of a non-fused-ring polythiophene backbone. The resulting polymer, n-PT1, shows low LUMO/HOMO energy levels of -3.91 eV/-6.22 eV, high electron mobility of 0.39 cm2  V-1 s-1 and high crystallinity in thin film. After n-doping, n-PT1 exhibits excellent thermoelectric performance with an electrical conductivity of 61.2 S cm-1 and a power factor (PF) of 141.7 µW m-1 K-2 . This PF is the highest value reported so far for n-type conjugated polymers and this is the first time for polythiophene derivatives to be used in n-type organic thermoelectrics. The excellent thermoelectric performance of n-PT1 is due to its superior tolerance to doping. This work indicates that polythiophene derivatives without fused rings are low-cost and high-performance n-type conjugated polymers.

Differential Diagnosis of Acute and Chronic Gouty Arthritis by Multijoint Ultrasound.

To investigate whether multi-joint ultrasound (US) findings in patients with gouty arthritis could be used to distinguish between acute and chronic stages, we performed a retrospective study with 129 enrolled patients from the Rheumatology Department of the First Affiliated Hospital of Chengdu Medical College from September 1, 2018 to June 12, 2019. Patients with acute or non-acute gout were categorized using clinical data, and US imaging findings of the knees, ankles and first metatarsophalangeal joints were analyzed and compared between groups. Notably, we found that the most prevalent sign detected by US was the hyperechoic spot in the synovium, followed by arthrosynovitis, aggregates, double contour signs and tophi; meanwhile, bone erosions were the least common. Additionally, synovitis was more frequently detected in the acute joints of gouty arthritis (49%) compared with the non-acute joints (35%), whereas grade 1 or 2 blood flow classifications (97%), tophi and bone lesions were more often seen in the latter. Overall, our data suggest that multi-joint US scanning might be used to evaluate disease severity and discriminate between stages of gouty arthritis.

A Distannylated Monomer of a Strong Electron-Accepting Organoboron Building Block: Enabling Acceptor-Acceptor-Type Conjugated Polymers for n-Type Thermoelectric Applications.

Acceptor-acceptor (A-A) copolymerization is an effective strategy to develop high-performance n-type conjugated polymers. However, the development of A-A type conjugated polymers is challenging due to the synthetic difficulty. Herein, a distannylated monomer of strong electron-deficient double B←N bridged bipyridine (BNBP) unit is readily synthesized and used to develop A-A type conjugated polymers by Stille polycondensation. The resulting polymers show ultralow LUMO energy levels of -4.4 eV, which is among the lowest value reported for organoboron polymers. After n-doping, the resulting polymers exhibit electric conductivity of 7.8 S cm-1 and power factor of 24.8 µW m-1 K-2 . This performance is among the best for n-type polymer thermoelectric materials. These results demonstrate the great potential of A-A type organoboron polymers for high-performance n-type thermoelectrics.

Percutaneous contrast-enhanced ultrasound for localization and diagnosis of sentinel lymph node in early breast cancer.

This study assessed the efficacy of percutaneous contrast-enhanced ultrasound (CEUS) in localization sentinel lymph node (SLNs) for biopsy and diagnosis of metastatic SLNs in patients with early breast cancer. From January to November 2017, seventy-five patients with early breast cancer confirmed by pathology were enrolled in this study. CEUS was performed after subdermal injection of ultrasound contrast agent (SonoVue, 2.0 ml in total dose) around the areola on the ipsilateral side of the breast. The contrast-enhanced lymphatic vessels and associated SLNs were observed and traced in real time. The lymphatic vessels and SLN were mapped and labeled on the skin surface. Sentinel lymph node biopsy (SLNB) was performed after injection of 2.0 ml methylene blue at same injection site of SonoVue. The accuracy of percutaneous CEUS localization of SLNs was determined compared to blue dye injection technique. The pathological results under blue dye guided biopsy were used as the reference standard to calculate the sensitivity and specificity of CEUS for the diagnosis of SLNs. A total of 163 SLNs obtained through SLNB following methylene blue tracing in 75 patients. There were 116 SLNs identified by percutaneous CEUS. The difference of detection rates between blue dye and CEUS was statistically significant (Z = -2.651, P = 0.008). The identification rate of SLNs by CEUS was 71.17% (116/163). The accuracy of percutaneous CEUS localization of axillary SLNs was 94.67% (71/75) compared to blue dye-guided biopsy. Among the 116 SLNs detected by percutaneous CEUS, pathologic results showed 51 positive SLNs and 65 negative SLNs whiles CEUS findings indicated 83 positive SLNs and 33 negative SLNs. Only 50 of 83 SLNs had metastasis on pathology, while 33 were detected as false positive. The sensitivity and specificity of CEUS for the diagnosis of metastatic SLN was 98.04%(50/51) and 49.23%(32/65), respectively. Percutaneous CEUS can be used as an effective method to localize the SLNs for guiding SLNB. This method has excellent sensitivity for identifying the SLNs but lower specificity for detecting metastatic SLNs in patients with early stage breast cancer.

Immobilization of Fe-Doped Ni2P Particles Within Biomass Agarose-Derived Porous N,P-Carbon Nanosheets for Efficient Bifunctional Oxygen Electrocatalysis.

A feasible and green sol-gel method is proposed to fabricate well-distributed nano-particulate Fe-Ni2P incorporated in N, P-codoped porous carbon nanosheets (Fe-Ni2P@N,P-CNSs) using biomass agarose as a carbon source, and ethylenediamine tetra (methylenephosphonic acid) (EDTMPA) as both the N and P source. The doped Fe in Ni2P is essential for a substantial increase in intrinsic catalytic activity, while the combined N,P-containing porous carbon matrix with a better degree of graphitization endows the prepared Fe-Ni2P@N,P-CNSs catalyst with a high specific surface area and improved electrical conductivity. Benefiting from the specific chemical composition and designed active site structure, the as-synthesized Fe-Ni2P@N,P-CNSs manifests a satisfying catalytic performance toward both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in an alkaline solution, with low overpotential, small Tafel slope and long-term durability, relative to the counterparts (Fe-free Ni12P5/Ni2P2O7@N,P-CNSs and CNSs) with single components and even comparable to Pt/C and RuO2 catalysts. The present work broadens the exploration of efficient bifunctional oxygen electrocatalysts using earth abundant biomass as carbon sources based on non-noble metals for low cost renewable energy conversion/storage.

A General Strategy for the Synthesis of PtM (M=Fe, Co, Ni) Decorated Three-Dimensional Hollow Graphene Nanospheres for Efficient Methanol Electrooxidation.

A universal sacrificial template-based synthesis strategy was reported to prepare three dimensional (3D) reduced oxide graphene supported PtM (M=Fe, Co, Ni) hollow nanospheres (PtM/RGO HNSs). The inner 3D wrinkle-free graphene skeleton can promote electron and ion kinetics, resulting in enhancement for the permeation of small organic molecule in fuel cells. As inspired by this, the 3D PtM (M=Fe, Co, Ni)/RGO HNSs exhibit clearly enhanced electrocatalytic activity and durability towards the methanol oxidation reaction (MOR) in acidic medium compared with a commercial Pt/C catalyst. This study provides a versatile approach of realizing controlled synthesis of 3D graphene-metal hybrid nanostructures irrespective of the components of the metal domains, and will pave the way for the design of hetero-nanostructures with optimized morphologies and functions.

In Situ Integration of Ultrathin PtCu Nanowires with Reduced Graphene Oxide Nanosheets for Efficient Electrocatalytic Oxygen Reduction.

Ultrathin Pt-based nanowires are considered as promising electrocatalysts owing to their high atomic utilization efficiency and structural robustness. Moreover, integration of Pt-based nanowires with graphene oxide (GO) could further increase the electrocatalytic performance, yet remains challenging to date. Herein, for the first time we demonstrate the in situ synthesis of ultrathin PtCu nanowires grown over reduced GO (PtCu-NWs/rGO) by a one-pot hydrothermal approach with the aid of amine-terminated poly(N-isopropyl acrylamide) (PNIPAM-NH2 ). The judicious selection of PNIPAM-NH2 facilitates the in situ nucleation and anisotropic growth of nanowires on the rGO surface and oriented attachment mechanism accounts for the formation of PtCu ultrathin nanowires. Owing to the synergy between PtCu NWs and rGO support, the PtCu-NWs/rGO outperforms the rGO supported PtCu nanoparticles (PtCu-NPs/rGO), PtCu-NWs, and commercial Pt/C toward the oxygen reduction reaction (ORR) with higher activity and better stability, making it a promising cathodic electrocatalyst for both fuel cells and metal-air cells. Moreover, the present synthetic strategy could inspire the future design of other metal alloy nanowires/carbon hybrid catalysts.