Coxsackievirus B3 HFMD animal models in Syrian hamster and rhesus monkey.

Coxsackievirus B3 (CVB3) is the pathogen causing hand, foot and mouth disease (HFMD), which manifests across a spectrum of clinical severity from mild to severe. However, CVB3-infected mouse models mainly demonstrate viral myocarditis and pancreatitis, failing to replicate human HFMD symptoms. Although several enteroviruses have been evaluated in Syrian hamsters and rhesus monkeys, there is no comprehensive data on CVB3. In this study, we have first tested the susceptibility of Syrian hamsters to CVB3 infection via different routes. The results showed that Syrian hamsters were successfully infected with CVB3 by intraperitoneal injection or nasal drip, leading to nasopharyngeal colonization, acute severe pathological injury, and typical HFMD symptoms. Notably, the nasal drip group exhibited a longer viral excretion cycle and more severe pathological damage. In the subsequent study, rhesus monkeys infected with CVB3 through nasal drips also presented signs of HFMD symptoms, viral excretion, serum antibody conversion, viral nucleic acids and antigens, and the specific organ damages, particularly in the heart. Surprisingly, there were no significant differences in myocardial enzyme levels, and the clinical symptoms resembled those often associated with common, mild infections. In summary, the study successfully developed severe Syrian hamsters and mild rhesus monkey models for CVB3-induced HFMD. These models could serve as a basis for understanding the disease pathogenesis, conducting pre-trial prevention and evaluation, and implementing post-exposure intervention.

Multiperspective Decoupling Analyses between Global Embodied Carbon Chains and Global Value Chains.

Decoupling global economic growth from carbon emissions is essential for mitigating global climate change while maintaining continuous economic growth. Traditional production-side decoupling analysis alone is insufficient to capture the decoupling status between carbon emissions and the value added throughout global supply chains. This study investigates the decoupling status between value added and greenhouse gas (GHG) emissions during 1995-2019 from consumption and income perspectives. We find that the decoupling statuses of 17 regions (especially Russia, Australia, and Malta) show significant differences across multiple perspectives. For example, Malta's direct GHG emissions decreased with its GDP growth from a production perspective (i.e., achieved strong decoupling). However, its consumption-based GHG emissions increased with the growth of consumption-based value added (i.e., expansive negative decoupling). Moreover, most international pairs have not yet achieved strong decoupling from consumption and income perspectives. International multilateral cooperation is crucial for decoupling global GHG emissions from economic growth across global supply chains. This study provides insights into the decoupling between embodied GHG emissions and value added from consumption and income perspectives. The findings of this study can complement existing policies on global GHG emission mitigation and sustainable development.

Histone Modification of Osteogenesis Related Genes Triggered by Substrate Topography Promotes Human Mesenchymal Stem Cell Differentiation.

The clinical success of orthopedic implants is closely related to their integration in the bone tissue promoted by rough device surfaces. The biological response of precursor cells to their artificial microenvironments plays a critical role in this process. In this study, we elucidated the relation between cell instructivity and surface microstructure of polycarbonate (PC)-based model substrates. The rough surface structure (hPC) with an average peak spacing (Sm) similar to the trabecular spacing of trabecular bone improved osteogenic differentiation of human bone marrow mesenchymal stem cells (hBMSCs), as compared to the smooth surface (sPC) and the surface with a moderate Sm value (mPC). The hPC substrate promoted the cell adhesion and assembling of F-actin and enhanced cell contractile force by upregulating phosphorylated myosin light chain (pMLC) expression. The increased cell contractile force led to YAP nuclear translocation and the elongation of cell nuclei, presenting higher levels of active form of Lamin A/C. The nuclear deformation alternated the histone modification profile, particularly the decrease of H3K27me3 and increase of H3K9ac on the promoter region of osteogenesis related genes (ALPL, RUNX2, and OCN). Mechanism study using inhibitors and siRNAs elucidated the role of YAP, integrin, F-actin, myosin, and nuclear membrane proteins in such a regulatory process of surface topography on stem cell fate. These mechanistical insights on the epigenetic level give a new perspective in understanding of the interaction of substrate and stem cells as well as provide valuable criteria for designing bioinstructive orthopedic implants.

Remote ischemic conditioning attenuates blood-brain barrier disruption after recombinant tissue plasminogen activator treatment via reducing PDGF-CC.

Treatment of acute ischemic stroke with the recombinant tissue plasminogen activator (rtPA) is associated with increased blood-brain barrier (BBB) disruption and hemorrhagic transformation. Remote ischemic conditioning (RIC) has demonstrated neuroprotective effects against acute ischemic stroke. However, whether and how RIC regulates rtPA-associated BBB disruption remains unclear. Here, a rodent model of thromboembolic stroke followed by rtPA thrombolysis at different time points was performed with or without RIC. Brain infarction, neurological outcomes, BBB permeability, and intracerebral hemorrhage were assessed. The platelet-derived growth factor CC (PDGF-CC)/PDGFRα pathway in the brain tissue, PDGF-CC levels in the skeletal muscle and peripheral blood were also measured. Furthermore, impact of RIC on serum PDGF-CC levels were measured in healthy subjects and AIS patients. Our results showed that RIC substantially reduced BBB injury, intracerebral hemorrhage, cerebral infarction, and neurological deficits after stroke, even when rtPA was administrated in a delayed therapeutic time window. Mechanistically, RIC significantly decreased PDGFRα activation in ischemic brain tissue and reduced blood PDGF-CC levels, which partially resulted from PDGF-CC reduction in the skeletal muscle of RIC-applied hindlimbs and platelets. Intravenous or intraventricular recombinant PDGF-CC supplementation abolished RIC protective effects on BBB integrity. Moreover, similar changes of PDGF-CC in serum by RIC were also observed in healthy humans and acute ischemic stroke patients. Together, our study demonstrates that RIC can attenuate rtPA-aggravated BBB disruption after ischemic stroke via reducing the PDGF-CC/PDGFRα pathway and thus supports RIC as a potential approach for BBB disruption prevention or treatment following thrombolysis.

Engineering Properties of PVA Fibre-Reinforced Geopolymer Mortar Containing Waste Oyster Shells.

Recycling crushed waste oyster shells (WOS) as a fine aggregate is an attractive method of disposal. However, its use in geopolymer mortar has not been reported. The influence of PVA fibres on the engineering properties of the new geopolymer mortar is still unclear. To bridge the gap, this study investigated the influence of various PVA fibre contents (0-1.05 vol%) on the flowability, compressive, flexural strengths, drying shrinkage, sorptivity, chloride resistance, porosity, fibre dispersion, embodied CO2 emissions (ECO2e), and embodied energy (EE) of the geopolymer mortar. The results indicated that the inclusion of 0.15-1.05 vol% of PVA fibres improved the flexural strength by 10.10-42.31% and reduced the drying shrinkage by 13.37-65.79%. The flowability and compressive strength decreased by 10.78-34.28% and 7.50-27.65%, respectively, but they were sufficient for construction. The sorptivity increased by 1.45-15.16%, and the chloride resistance decreased by 15.09-56.35%, but the geopolymer mortar was still classified as low chloride penetrability. In summary, the optimal content of PVA fibres is 0.45 vol%, and the geopolymer mortar has good engineering properties and eco-efficiency. The cost analysis and high-temperature resistance of the geopolymer mortar are neglected in this study, which should be evaluated in future work.

Biofunction of Polydopamine Coating in Stem Cell Culture.

High levels of reactive oxygen species (ROS) during stem cell expansion often lead to replicative senescence. Here, a polydopamine (PDA)-coated substrate was used to scavenge extracellular ROS for mesenchymal stem cell (MSC) expansion. The PDA-coated substrate could reduce the oxidative stress and mitochondrial damage in replicative senescent MSCs. The expression of senescence-associated ß-galactosidase of MSCs from three human donors (both bone marrow- and adipose tissue-derived) was suppressed on PDA. The MSCs on the PDA-coated substrate showed a lower level of interleukin 6 (IL-6), one of the senescence-associated inflammatory components. Cellular senescence-specific genes, such as p53 and p21, were downregulated on the PDA-coated substrate, while the stemness-related gene, OCT4, was upregulated. The PDA-coated substrate strongly promoted the proliferation rate of MSCs, while the stem cell character and differentiation potential were retained. Large-scale expansion of stem cells would greatly benefit from the PDA-coated substrate.

Polymeric sheet actuators with programmable bioinstructivity.

Stem cells are capable of sensing and processing environmental inputs, converting this information to output a specific cell lineage through signaling cascades. Despite the combinatorial nature of mechanical, thermal, and biochemical signals, these stimuli have typically been decoupled and applied independently, requiring continuous regulation by controlling units. We employ a programmable polymer actuator sheet to autonomously synchronize thermal and mechanical signals applied to mesenchymal stem cells (MSCs). Using a grid on its underside, the shape change of polymer sheet, as well as cell morphology, calcium (Ca2+) influx, and focal adhesion assembly, could be visualized and quantified. This paper gives compelling evidence that the temperature sensing and mechanosensing of MSCs are interconnected via intracellular Ca2+ Up-regulated Ca2+ levels lead to a remarkable alteration of histone H3K9 acetylation and activation of osteogenic related genes. The interplay of physical, thermal, and biochemical signaling was utilized to accelerate the cell differentiation toward osteogenic lineage. The approach of programmable bioinstructivity provides a fundamental principle for functional biomaterials exhibiting multifaceted stimuli on differentiation programs. Technological impact is expected in the tissue engineering of periosteum for treating bone defects.

Dedifferentiation of mature adipocytes with periodic exposure to cold.

 Lipid-containing adipocytes can dedifferentiate into fibroblast-like cells under appropriate culture conditions, which are known as dedifferentiated fat (DFAT) cells. However, the relative low dedifferentiation efficiency with the established protocols limit their widespread applications. In this study, we found that adipocyte dedifferentiation could be promoted via periodic exposure to cold (10°C) in vitro. The lipid droplets in mature adipocytes were reduced by culturing the cells in periodic cooling/heating cycles (10-37°C) for one week. The periodic temperature change led to the down-regulation of the adipogenic genes (FABP4, Leptin) and up-regulation of the mitochondrial uncoupling related genes (UCP1, PGC-1α, and PRDM16). In addition, the enhanced expression of the cell proliferation marker Ki67 was observed in the dedifferentiated fibroblast-like cells after periodic exposure to cold, as compared to the cells cultured in 37°C. Our in vitro model provides a simple and effective approach to promote lipolysis and can be used to improve the dedifferentiation efficiency of adipocytes towards multipotent DFAT cells.

Polydepsipeptide Block-Stabilized Polyplexes for Efficient Transfection of Primary Human Cells.

The rational design of a polyplex gene carrier aims to balance maximal effectiveness of nucleic acid transfection into cells with minimal adverse effects. Depsipeptide blocks with an Mn ∼ 5 kDa exhibiting strong physical interactions were conjugated with PEI moieties (2.5 or 10 kDa) to di- and triblock copolymers. Upon nanoparticle formation and complexation with DNA, the resulting polyplexes (sizes typically 60-150 nm) showed remarkable stability compared to PEI-only or lipoplex and facilitated efficient gene delivery. Intracellular trafficking was visualized by observing fluorescence-labeled pDNA and highlighted the effective cytoplasmic uptake of polyplexes and release of DNA to the perinuclear space. Specifically, a triblock copolymer with a middle depsipeptide block and two 10 kDa PEI swallowtail structures mediated the highest levels of transgenic VEGF secretion in mesenchymal stem cells with low cytotoxicity. These nanocarriers form the basis for a delivery platform technology, especially for gene transfer to primary human cells.

Adipogenic differentiation of human adipose derived mesenchymal stem cells in 3D architectured gelatin based hydrogels (ArcGel).

Polymeric matrices mimicking multiple functions of the ECM are expected to enable a material induced regeneration of tissues. Here, we investigated the adipogenic differentiation of human adipose derived mesenchymal stem cells (hADSCs) in a 3D architectured gelatin based hydrogel (ArcGel) prepared from gelatin and L-lysine diisocyanate ethyl ester (LDI) in an one-step process, in which the formation of an open porous morphology and the chemical network formation were integrated. The ArcGel was designed to support adipose tissue regeneration with its 3D porous structure, high cell biocompatibility, and mechanical properties compatible with human subcutaneous adipose tissue. The ArcGel could support initial cell adhesion and survival of hADSCs. Under static culture condition, the cells could migrate into the inner part of the scaffold with a depth of 840±120 µm after 4 days, and distributed in the whole scaffold (2 mm in thickness) within 14 days. The cells proliferated in the scaffold and the fold increase of cell number after 7 days of culture was 2.55±0.08. The apoptotic rate of hADSCs in the scaffold was similar to that of cells maintained on tissue culture plates. When cultured in adipogenic induction medium, the hADSCs in the scaffold differentiated into adipocytes with a high efficiency (93±1%). Conclusively, this gelatin based 3D scaffold presented high cell compatibility for hADSC cultivation and differentiation, which could serve as a potential implant material in clinical applications for adipose tissue reparation and regeneration.

Modulation of the mesenchymal stem cell migration capacity via preconditioning with topographic microstructure.

Controlling mesenchymal stem cells (MSCs) behavior is necessary to fully exploit their therapeutic potential. Various approaches are employed to effectively influence the migration capacity of MSCs. Here, topographic microstructures with different microscale roughness were created on polystyrene (PS) culture vessel surfaces as a feasible physical preconditioning strategy to modulate MSC migration. By analyzing trajectories of cells migrating after reseeding, we demonstrated that the mobilization velocity of human adipose derived mesenchymal stem cells (hADSCs) could be promoted by and persisted after brief preconditioning with the appropriate microtopography. Moreover, the elevated activation levels of focal adhesion kinase (FAK) and mitogen-activated protein kinase (MAPK) in hADSCs were also observed during and after the preconditioning process. These findings underline the potential enhancement of in vivo therapeutic efficacy in regenerative medicine via transplantation of topographic microstructure preconditioned stem cells.

Functional Nanoparticles and their Interactions with Mesenchymal Stem Cells.

Mesenchymal stem cells (MSCs) have become one of the most important cell sources for regenerative medicine. However, some mechanisms of MSC-based therapy are still not fully understood. The clinical outcome may be restricted by some MSC-related obstacles such as the low survival rate, differentiation into undesired lineages and malignant transformation. In recent years, with the emergence of nanotechnology, various types of multifunctional nanoparticles (NPs) have been designed, prepared and explored for bio-related applications. There is high potential of NPs in biomedical applications, attributed to the high capacity of cellular internalization in MSCs and their multiple functionalities. They can be used either as labeling agent to track MSCs for mechanism study or as gene/drug delivery carriers to regulate the cellular behavior and functions of MSCs. However, the application of NPs may be accompanied by some undesirable effects, as some NPs can induce cell death, inhibit cell proliferation or influence the differentiation of MSCs. Aiming to provide a comprehensive understanding of the interaction between NPs and MSCs, recent progress in the design and preparation of multifunctional NPs is summarized in this review, mechanisms of cellular internalization of the NPs are discussed, the main applications of multifunctional NPs in MSCs are highlighted and overview about cellular response of MSCs to different NPs is given. Future studies aiming on design and development of NPs with multifunctionality may open a new field of applying nanotechnology in stem cell-based therapy.

Tbx18-dependent differentiation of brown adipose tissue-derived stem cells toward cardiac pacemaker cells.

A cell-sourced biological pacemaker is a promising therapeutic approach for sick sinus syndrome (SSS) or severe atrial ventricular block (AVB). Adipose tissue-derived stem cells (ATSCs), which are optimal candidate cells for possible use in regenerative therapy for acute or chronic myocardial injury, have the potential to differentiate into spontaneous beating cardiomyocytes. However, the pacemaker characteristics of the beating cells need to be confirmed, and little is known about the underlying differential mechanism. In this study, we found that brown adipose tissue-derived stem cells (BATSCs) in mice could differentiate into spontaneous beating cells in 15% FBS Dulbecco's modified Eagle's medium (DMEM) without additional treatment. Subsequently, we provide additional evidence, including data regarding ultrastructure, protein expression, electrophysiology, and pharmacology, to support the differentiation of BATSCs into a cardiac pacemaker phenotype during the course of early cultivation. Furthermore, we found that silencing Tbx18, a key transcription factor in the development of pacemaker cells, terminated the differentiation of BATSCs into a pacemaker phenotype, suggesting that Tbx18 is required to direct BATSCs toward a cardiac pacemaker fate. The expression of Tbx3 and shox2, the other two important transcription factors in the development of pacemaker cells, was decreased by silencing Tbx18, which suggests that Tbx18 mediates the differentiation of BATSCs into a pacemaker phenotype via these two downstream transcription factors.

Influence of surface roughness on neural differentiation of human induced pluripotent stem cells.

Induced pluripotent stem cells (iPSCs) own the capacity to develop into all cell types of the adult body, presenting high potential in regenerative medicine. Regulating and controlling the differentiation of iPSCs using the surface topographic cues of biomaterials is a promising and safe approach to enhance their therapeutic efficacy. In this study, we tested the effects of surface roughness on differentiation of human iPSCs into neural progenitor cells and dopaminergic neuron cells using polystyrene with different roughness (R0: flat surface; R1: rough surface, Rq ∼ 6 µm; R2: rough surface, Rq ∼ 38 µm). Neural differentiation of human iPSCs could be influenced by surface roughness. Up-regulated neuronal markers were found in cells on rough surface, as examined by real-time PCR and immunostaining. Particularly, the R1 surface significantly improved the neuronal marker expression, as compared to R0 and R2 surface. This study demonstrates the significance of surface roughness, depending on the roughness level, in promoting differentiation of human iPSCs towards the neuronal lineage. Our study suggests the potential applications of surface roughness in iPSCs based treatment of neural disorder diseases, and highlights the importance of design and development of biomaterials with effective surface structures to regulate stem cells.

Engineering biodegradable micelles of polyethylenimine-based amphiphilic block copolymers for efficient DNA and siRNA delivery.

Polycationic micelles have shown advantageous properties as nucleic acid delivery vectors both in vitro and in vivo. In contrast to polycationic micelles reported so far, we designed particles integrating a sufficient nucleic acid condensation capability by polycationic polyethylenimine (PEI) segments as well as only a mild cytotoxic behavior. The micelles composed of a hydrophobic oligoester core with glycolide units resulting in fast degradation after cellular internalization in combination with PEG moieties acting as shielding agents. By grafting branched 25kDa polyethylenimine (PEI25) and poly(ethylene glycol) (PEG) on poly[(ε-caprolactone)-co-glycolide] (CG), amphiphilic PEI-CG-PEI and PEG-CG block copolymers were used to form a series of micelles via self-assembly of PEI-CG-PEI or co-assembly of both copolymers for DNA and siRNA delivery. This modular system enabled a systematic investigation of different parameters and their synergetic effects as different functions were introduced. The polyplex formation and serum stability, cytotoxicity, and transfection activity could be tailored by changing the CG chain length in PEI-based copolymer, incorporating PEG-CG, and varying the N/P ratio. All micelle-based polyplex compositions showed high DNA transfection activity according to reporter gene-expression and an exceptionally high knockdown in siRNA delivery experiments. Remarkably, the GFP expression of >99% cells was successfully knocked down by micelle-mediated siRNA interference, resulting in a decrease of two orders of magnitude in fluorescence intensity. Incorporation of PEG-CG in the micelles reduced the PEI-related cytotoxicity, and markedly enhanced the serum stability of both DNA and siRNA polyplexes. Compared with homo-PEI25, these micelles showed several advantages including the lower toxicity, higher siRNA transfection efficiency and higher polyplex stability in the presence of serum. This study therefore provides an effective approach to tune the structure, property and function of polycationic micelles for efficient DNA and siRNA delivery, which could contribute to the design and development of novel non-viral transfection vectors with superb functionality.

Dopamine release from transplanted neural stem cells in Parkinsonian rat striatum in vivo.

Embryonic stem cell-based therapies exhibit great potential for the treatment of Parkinson's disease (PD) because they can significantly rescue PD-like behaviors. However, whether the transplanted cells themselves release dopamine in vivo remains elusive. We and others have recently induced human embryonic stem cells into primitive neural stem cells (pNSCs) that are self-renewable for massive/transplantable production and can efficiently differentiate into dopamine-like neurons (pNSC-DAn) in culture. Here, we showed that after the striatal transplantation of pNSC-DAn, (i) pNSC-DAn retained tyrosine hydroxylase expression and reduced PD-like asymmetric rotation; (ii) depolarization-evoked dopamine release and reuptake were significantly rescued in the striatum both in vitro (brain slices) and in vivo, as determined jointly by microdialysis-based HPLC and electrochemical carbon fiber electrodes; and (iii) the rescued dopamine was released directly from the grafted pNSC-DAn (and not from injured original cells). Thus, pNSC-DAn grafts release and reuptake dopamine in the striatum in vivo and alleviate PD symptoms in rats, providing proof-of-concept for human clinical translation.