Evaluation of the effect of graphene oxide-based nanocomposites on smear layer by a scanning electron microscope: Laboratory investigation.

This study is to examine the effect of graphene oxide (GO) and GO-based nanocomposites (GO_EDTA, GO_CHIT) on the smear layer by scanning electron microscopy (SEM). Sixty human single-rooted anterior teeth were used. Samples were randomly categorised into six groups. Distilled water in group 1, 17% EDTA in group 2, chitosan (CHIT) solution in group 3, GO solution in group 4, GO_EDTA solution in group 5 and GO_CHIT in group 6 were used as irrigation solutions. Photomicrographs were acquired from the coronal, middle and apical parts of the samples by SEM. Statistical analyses were performed using Kruskal-Wallis, Mann-Whitney U and Wilcoxon tests. There was a statistically significant difference among the groups (p < 0.003). Adding GO to CHIT and EDTA did not affect removing the smear layer in all segments (p < 0.003). Incorporating GO into EDTA and CHIT solutions did not change their interaction with the smear layer.

Biphenylene-containing polycyclic conjugated compounds.

There has been a growing emphasis on the synthesis of polycyclic conjugated compounds, driven by their distinct structural characteristics that make them valuable candidates for use in cutting-edge technologies. In particular, acenes, a subgroup of polycyclic aromatic compounds, are sought-after synthetic targets due to their remarkable optoelectronic properties which stem from their π-conjugation and planar structure. Despite all these promising characteristics, acenes exhibit significant stability problems when their conjugation enhances. Various approaches have been developed to address this stability concern. Among these strategies, one involves the incorporation of the biphenylene unit into acene frameworks, limiting the electron delocalization through the antiaromatic four-membered ring. This review gives a brief overview of the methods used in the synthesis of biphenylenes and summarizes the recent studies on biphenylene-containing polycyclic conjugated compounds, elucidating their synthesis, and distinct optoelectronic properties.

Isoniazid Linked to Sulfonate Esters via Hydrazone Functionality: Design, Synthesis, and Evaluation of Antitubercular Activity.

Isoniazid (INH) is one of the key molecules employed in the treatment of tuberculosis (TB), the most deadly infectious disease worldwide. However, the efficacy of this cornerstone drug has seriously decreased due to emerging INH-resistant strains of Mycobacterium tuberculosis (Mtb). In the present study, we aimed to chemically tailor INH to overcome this resistance. We obtained thirteen novel compounds by linking INH to in-house synthesized sulfonate esters via a hydrazone bridge (SIH1-SIH13). Following structural characterization by FTIR, 1H NMR, 13C NMR, and HRMS, all compounds were screened for their antitubercular activity against Mtb H37Rv strain and INH-resistant clinical isolates carrying katG and inhA mutations. Additionally, the cytotoxic effects of SIH1-SIH13 were assessed on three different healthy host cell lines; HEK293, IMR-90, and BEAS-2B. Based on the obtained data, the synthesized compounds appeared as attractive antimycobacterial drug candidates with low cytotoxicity. Moreover, the stability of the hydrazone moiety in the chemical structure of the final compounds was confirmed by using UV/Vis spectroscopy in both aqueous medium and DMSO. Subsequently, the compounds were tested for their inhibitory activities against enoyl acyl carrier protein reductase (InhA), the primary target enzyme of INH. Although most of the synthesized compounds are hosted by the InhA binding pocket, SIH1-SIH13 do not primarily show their antitubercular activities by direct InhA inhibition. Finally, in silico determination of important physicochemical parameters of the molecules showed that SIH1-SIH13 adhered to Lipinski's rule of five. Overall, our study revealed a new strategy for modifying INH to cope with the emerging drug-resistant strains of Mtb.

3-Alkynylindoles as Building Blocks for the Synthesis of Electronically Tunable Indole-Based Push-Pull Chromophores.

In this study, two different classes of push-pull chromophores were synthesized in modest to excellent yields by formal [2+2] cycloaddition-retroelectrocyclization (CA-RE) reactions. N-Methyl indole was introduced as a new donor group to activate alkynes in the CA-RE transformations. Depending on the side groups' size and donor/acceptor characteristics, N-methyl indole-containing compounds exhibited λmax values ranging between 378 and 658 nm. The optoelectronic properties of the reported D-A-type structures were studied by UV/vis spectroscopy and computational studies. The complete regioselectivity observed in the products was elaborated by one-dimensional (1D) and two-dimensional (2D) NMR studies, and the electron donor strength order of N-alkyl indole and triazene donor groups was also established. The intramolecular charge-transfer characteristics of the target push-pull chromophores were investigated by frontier orbital depictions, electrostatic potential maps, and time-dependent density functional theory calculations. Overall, the computational and experimental results match each other. Integrating a new donor group, N-alkyl indole, into the substrates used in formal [2+2] cycloaddition-retroelectrocyclizations has significant potential to overcome the limited donor-substituted substrate scope problem of CA-RE reactions.

Polycyclic aromatic hydrocarbon-substituted push-pull chromophores: an investigation of optoelectronic and nonlinear optical properties using experimental and theoretical approaches.

A series of new push-pull chromophores were synthesized in moderate to very high yields (65%-97%) by treating TCNE and TCNQ with alkynes substituted by electron-rich diethylaniline and polycyclic aromatic hydrocarbons. Some of the chromophores exhibit strong intramolecular charge-transfer bands in the near-IR region with λmax values between 695 and 749 nm. With the help of experimental and theoretical analysis, it is concluded that the trend in λ max values is affected by PAH substituents sterically, not electronically. Steric constraints led to the increased dihedral angles, reducing conjugation efficiencies. The absorption properties of push-pull compounds have been investigated in solvents possessing different polarities. All chromophores exhibited positive solvatochromism. As an additional proof of efficient charge-transfer in push-pull chromophores, quinoid character (dr) values were predicted using calculated bond lengths. Remarkably, substantial dr values (0.045-0.049) were predicted for donor diethylaniline rings in all compounds. The effects of various polycyclic aromatic hydrocarbons on optical and nonlinear optical properties were also studied by computational methods. Several parameters, such as band gaps, Mulliken electronegativity, chemical hardness and softness, dipole moments, average polarizability, first hyperpolarizability, were predicted for chromophores at the B3LYP/6-31++G(d,p) level of theory. The predicted first hyperpolarizability ß(tot) values vary between 198 to 538 × 10-30 esu for the reported push-pull chromophores in this study. The highest predicted ß(tot) value in this study is 537.842 × 10-30 esu, 8150 times larger than the predicted ß(tot) value of benchmark NLO material urea, suggests possible utilization of these chromophores in NLO devices. The charge-transfer character of the synthesized structures was further confirmed by HOMO-LUMO depictions and electrostatic potential maps.

Iron-Catalyzed α-C-H Cyanation of Simple and Complex Tertiary Amines.

This manuscript details the development of a general and mild protocol for the α-C-H cyanation of tertiary amines and its application in late-stage functionalization. Suitable substrates include tertiary aliphatic, benzylic, and aniline-type substrates and complex substrates. Functional groups tolerated under the reaction conditions include various heterocycles and ketones, amides, olefins, and alkynes. This broad substrate scope is remarkable, as comparable reaction protocols for α-C-H cyanation frequently occur via free radical mechanisms and are thus fundamentally limited in their functional group tolerance. In contrast, the presented catalyst system tolerates functional groups that typically react with free radicals, suggesting an alternative reaction pathway. All components of the described catalyst system are readily available, allowing implementation of the presented methodology without the need for lengthy catalyst synthesis.

Bioproduction, structure elucidation and in vitro antiproliferative effect of eumelanin pigment from Streptomyces parvus BSB49.

In this study, the structure of the purified extracellular eumelanin pigment isolated from Streptomyces spp. was elucidated by detailed analysis via two different spectroscopic techniques (FT-IR and NMR). In vitro antiproliferative effects of eumelanin were evaluated on HeLa cell line. These experiments were carried out with the evaluation of the parameters including cell viability, cell index, and mitotic index. With the cell viability and cell index, IC50 concentration of eumelanin was determined as 10 µM. This result showed that the IC50 concentration of eumelanin decreased the values of cell viability, cell index and mitotic index. These changes are statistically significant (p < 0.01). The ability of the dissolved eumelanin (250 µg mL-1) to scavenge free radicals was determined via DPPH and ABTS and was shown to be about 87.73% and 75.2%, respectively, compared with standard antioxidants. It was observed that dry weights of eumelanin yield among the selected strains ranged from 160 to 240 mg L-1. The strain with the highest production potential was selected for 16S rDNA sequence analysis and, accordingly, the selected strain BSB49 was identified as Streptomyces parvus and the sequence analysis results were deposited in NCBI under accession number MK894155.

Naphthazarin-Polycyclic Conjugated Hydrocarbons and Iptycenes.

The synthesis of a set of naphthazarin-containing polycyclic conjugated hydrocarbons is described herein. Sequential Diels-Alder reactions on a tautomerized naphthazarin core were employed to access the final conjugated systems. Complete conjugation across the backbone can be achieved through complexation with BF2, as observed by 1H NMR analysis and UV/vis spectroscopy. Precise synthetic control over the degree of oxidation of naphthazarin quinone Diels-Alder adduct 10 is additionally demonstrated and enables us to direct its subsequent reactivity. Finally, this work serves to demonstrate the potential for naphthazarin as a building block in the synthesis of novel organic electronic materials.

Design and Synthesis of Aviram-Ratner-Type Dyads and Rectification Studies in Langmuir-Blodgett (LB) Films.

The design and synthesis of Aviram-Ratner-type molecular rectifiers, featuring an anilino-substituted extended tetracyanoquinodimethane (exTCNQ) acceptor, covalently linked by the σ-spacer bicyclo[2.2.2]octane (BCO) to a tetrathiafulvalene (TTF) donor moiety, are described. The rigid BCO spacer keeps the TTF donor and exTCNQ acceptor moieties apart, as demonstrated by X-ray analysis. The photophysical properties of the TTF-BCO-exTCNQ dyads were investigated by UV/Vis and EPR spectroscopy, electrochemical studies, and theoretical calculations. Langmuir-Blodgett films were prepared and used in the fabrication and electrical studies of junction devices. One dyad showed the asymmetric current-voltage (I-V) curve characteristic for rectification, unlike control compounds containing the TTF unit but not the exTCNQ moiety or comprising the exTCNQ acceptor moiety but lacking the donor TTF part, which both gave symmetric I-V curves. The direction of the observed rectification indicated that the preferred electron current flows from the exTCNQ acceptor to the TTF donor.

Synthesis and optoelectronic properties of Janus-dendrimer-type multivalent donor-acceptor systems.

A convergent, multistep protocol was employed for the synthesis of a Janus-type multivalent donor-acceptor system. The synthetic approach is based on a Sonogashira cross-coupling of two differently ferrocene-(Fc) substituted dendrons and a final sixfold [2 + 2] cycloaddition-retroelectrocyclization (CA-RE) reaction with tetracyanoethene, which occurs regioselectively at only one of the rigidly linked dendrons. The structural and optoelectronic properties of the compounds were investigated by X-ray analysis, UV/vis spectroscopy, and electrochemistry. The target Janus-system displays redox-amphoteric behavior. The nonalkynylated Fc end groups in one dendron are readily and reversibly oxidized. The second dendron, in which the terminal Fc-activated alkynes underwent the CA-RE reaction to give tetracyanobuta-1,3-dienes in the final step of the synthesis, undergoes four reversible 3-e(-) reductions in the very narrow potential range of 1 V. A spontaneous intramolecular charge transfer from the donor into the acceptor hemisphere was not observed. Furthermore, the oxidation potential of the Fc donors in one hemisphere is hardly perturbed by the push-pull acceptors in the other, which suggests that electronic communication along the π-system, with several meta-connectivities, is not efficient. Therefore, the charge-transfer bands seen in the Janus-type system originate from the interaction of the Fc donors with the directly connected tetracyanobuta-1,3-diene acceptors in the same hemisphere.

Synthesis of cyano-substituted diaryltetracenes from tetraaryl[3]cumulenes.

A versatile, two-step synthesis of highly substituted, cyano-functionalized diaryltetracenes has been developed, starting from easily accessible tetraaryl[3]cumulenes. This unprecedented transformation is initiated by [2+2] cycloaddition of tetracyanoethylene (TCNE) to the proacetylenic central double bond of the cumulenes to give an intermediate zwitterion, which after an electrocyclization cascade and dehydrogenation yields 5,5,11,11-tetracyano-5,11-dihydrotetracenes in a one-pot procedure. A subsequent copper-assisted decyanation/aromatization provided the target 5,11-dicyano-6,12-diaryltetracene derivatives. All of the postulated structures were confirmed by X-ray crystallography. The new chromophores are thermally highly stable and feature promising fluorescence properties for potential use in optoelectronic devices. They are selective chemosensors for Cu(I) ions, which coordinate to one of the CN substituents and form a 1:1 complex with an association constant of Ka =1.5×10(5)  L mol(-1) at 298 K.

From homoconjugated push-pull chromophores to donor-acceptor-substituted spiro systems by thermal rearrangement.

Series of homoconjugated push-pull chromophores and donor-acceptor (D-A)-functionalized spiro compounds were synthesized, in which the electron-donating strength of the anilino donor groups was systematically varied. The structural and optoelectronic properties of the compounds were investigated by X-ray analysis, UV/Vis spectroscopy, electrochemistry, and computational analysis. The homoconjugated push-pull chromophores with a central bicyclo[4.2.0]octane scaffold were obtained in high yield by [2+2] cycloaddition of 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) to N,N-dialkylanilino- or N,N-diarylanilino-substituted activated alkynes. The spirocyclic compounds were formed by thermal rearrangement of the homoconjugated adducts. They also can be prepared in a one-pot reaction starting from DDQ and anilino-substituted alkynes. Spiro products with N,N-diphenylanilino and N,N-diisopropylanilino groups were isolated in high yields whereas compounds with pyrrolidino, didodecylamino, and dimethylamino substituents gave poor yields, with formation of insoluble side products. It was shown by in situ trapping experiments with TCNE that cycloreversion is possible during the thermal rearrangement, thereby liberating DDQ. In the low-yielding transformations, DDQ oxidizes the anilino species present, presumably via an intermediate iminium ion pathway. Such a pathway is not available for the N,N-diphenylanilino derivative and, in the case of the N,N-diisopropylanilino derivative, would generate a strained iminium ion (A1,3 strain). The mechanism of the thermal rearrangement was investigated by EPR spectroscopy, which provides good evidence for a proposed biradical pathway starting with the homolytic cleavage of the most strained (CN)C-C(CN) bond between the fused four- and six-membered rings in the homoconjugated adducts.