Investigation Into the Effects of Intra-Articular Steroid on Post-Traumatic Osteoarthritis in Distal Radius Fractures: A Randomized Controlled Pilot Study.

PURPOSE: The aim of this prospective, randomized, controlled, double-blinded pilot study was to determine the rates of post-traumatic osteoarthritis and assess joint space width in the presence or absence of a single intra-articular injection of corticosteroid after an acute, intra-articular distal radius fracture (DRF). METHODS: Forty patients received a single, intra-articular, radiocarpal joint injection of 4 mg of dexamethasone (DEX) (n = 19) or normal saline placebo (n = 21) within 2 weeks of a surgically or nonsurgically treated intra-articular DRF. The primary outcome measure was minimum radiocarpal joint space width (mJSW) on noncontrast computed tomography scans at 2 years postinjection. Secondary outcomes were obtained at 3 months, 6 months, 1 year, and 2 years postinjection and included Disabilities of the Arm, Shoulder, and Hand; Michigan Hand Questionnaire; Patient-Rated Wrist Evaluation; wrist range of motion; and grip strength. RESULTS: At 2-year follow-up, there was no difference in mean mJSW between the DEX group (2.2 mm; standard deviation, 0.6; range, 1.4-3.2) and the placebo group (2.3 mm; standard deviation, 0.7; range, 0.9-3.9). Further, there were no differences in any secondary outcome measures at any postinjection follow-up interval. CONCLUSIONS: Radiocarpal joint injection of corticosteroid within 2 weeks of an intra-articular DRF does not appear to affect the development of post-traumatic osteoarthritis within 2 years follow-up in a small pilot cohort. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic II.

Update to Management of Acute Scaphoid Fractures.

The scaphoid is the most commonly fractured carpal bone. With high clinical suspicion and negative radiographs, expedient evaluation by CT or MRI has been recommended. When treating nondisplaced or minimally displaced scaphoid waist and distal pole fractures, immobilization below the elbow without inclusion of the thumb is an option. Comparatively, early surgical intervention for nondisplaced or minimally displaced scaphoid waist fractures allows for quicker return of function, but with increased risk of surgical complications and no long-term outcomes differences compared with cast immobilization. For most patients with such fractures, consideration for aggressive conservative treatment involving 6 weeks of immobilization with CT assessment to guide the need for continued casting, surgical intervention, or mobilization is advocated. Determination of union is best done with a CT scan at 6 weeks and at least 50% continuous trabecular bridging across the fracture site deemed sufficient to begin mobilization. Nonsurgical and surgical management of scaphoid fractures requires a thorough understanding of fracture location, fracture characteristics, and patient-specific factors to provide the best healing opportunity of this notoriously difficult fracture and return the patient to full function.

Tips and Tricks in the Management of Distal Radius Fractures.

Distal radius fractures are common. Volar plating is a valuable approach for many fractures. There are also difficult fractures that require careful attention to the exposure and technique for successful volar plating. Classic approaches, such as external fixation with additional percutaneous reduction and pinning or bone graft and fragment-specific fixation, remain valuable especially when volar plating is not applicable. The main objectives are to review the intricacies of volar plating and the use of external fixation with distal radius fractures. This also includes an understanding of the associated injuries that are present with these fractures and the expected outcome of these injuries relative to the distal radius fracture. First, the challenges with volar locked plating as well as many tips and tricks to help with reduction and stabilization of these fractures are reviewed. Second, the benefits and tips and tricks of external fixation are discussed. Finally, the management of common combined injuries with distal radius fractures is reviewed.

Pigmented Villonodular Synovitis as an Atypical Cause of Deep Motor Branch Neuropathy.

OBJECTIVES: Compression of the ulnar nerve in Guyon's canal results in ulnar tunnel syndrome (UTS). The patient may present with sensory and motor deficits (zone 1), motor deficit (zone 2), or sensory deficit (zone 3). The most common causes of UTS include ganglion cysts, idiopathic ulnar nerve compression, occupational pressure neuritis (repetitive compression), prolonged compression, hook of hamate fractures, and arterial thrombus or aneurysm. CASE REPORT: We report an atypical cause of UTS involving pigmented villonodular synovitis (PVNS) with a review of the literature. Surgical decompression of the ulnar nerve at Guyon's canal has resulted in resolving motor weakness and improved interosseous strength at latest follow-up. CONCLUSION: The most common causes of UTS are ganglion, occupational neuritis, prolonged compression, and ulnar artery thrombi/aneurysms. However, other more rare causes such as PVNS should be considered in the appropriate patient.

Early Versus Late Motion Following Volar Plating of Distal Radius Fractures.

Background: Distal radius fractures are common, and the trend in fixation has included the use of locked volar plating. The duration of splinting required after surgery and the effect splinting has upon outcome of the wrist are not clear. Our aim was to compare outcome of patients treated with early versus late motion protocol after volar plating. Methods: Thirty-three patients with distal radius fractures were prospectively and randomly enrolled into an early versus late motion study including volar plating of the distal radius fracture. Early motion included an active and passive wrist motion protocol by 14 days after surgery and delayed motion was initiated at 5 weeks. Fractures were defined as intra-articular and extra-articular, and those with, and without, ulnar styloid fracture. Motion and outcome scores (Disabilities of the Arm, Shoulder and Hand [DASH]/patient-rated wrist evaluation [PRWE]), and strength were measured through 1 year. Results: Wrist motion, DASH, and PRWE scores were only significantly different at 6 weeks with no significant differences at any later time points up to 1 year. One patient had complex regional pain syndrome (CRPS) and one had adhesive capsulitis in the late motion group. Conclusions: Following locked volar plating of distal radius fractures, early motion favored earlier return of motion along with lower DASH, PRWE, and pain scores within first 6 weeks. Although the late motion group had delayed recovery, there were no long-term significant differences in motion, strength, outcome, or pain scores. The 2 cases with complications (CRPS and adhesive capsulitis) did occur in the late motion group and may implicate late motion with these problems.

Outcomes after radiocarpal dislocation: a retrospective review.

BACKGROUND: Radiocarpal dislocations are rare, high-energy injuries. High morbidity and poor functional outcomes are common. Currently, there is limited data on functional outcomes following treatment of this injury. METHODS: A retrospective review was conducted analyzing the radiographic and clinical outcome of patients treated for a radiocarpal dislocation from 1979 to 2010. Outcome assessments included wrist range of motion, grip strength, Mayo wrist score, patient-rated wrist evaluation (PRWE), and disabilities of the arm, shoulder and hand (DASH) score. Statistical analysis was performed with the Student's t test. RESULTS: Twenty-six patients (26 wrists) were treated for a radiocarpal dislocation during the study period; 23 wrists were treated acutely (within 4 weeks of injury), and 3 were treated after a delayed presentation (>4 weeks). Clinical follow-up of more than 6 months was available in 17 patients. Three patients (12 %) underwent primary fusion as initial treatment (two radioscapholunate fusion; one total wrist fusion). Four wrists (24 %) failed initial treatment and were salvaged with scapholunate ligament reconstruction (one wrist) or partial wrist fusion (three wrists). Seventeen patients completed PRWE and DASH questionnaires with a mean of 14.6 years following surgery (range 2-32 years). Subjective outcomes tended to be superior in those patients treated with ligament reconstruction versus partial or complete wrist fusion; however, comparisons were not statistically significant. CONCLUSION: Radiocarpal dislocations result in significant osseous and ligamentous injury to the distal radius and carpus. Early recognition and treatment of radiocarpal dislocations with open reduction, internal fixation, and repair of ligaments may result in improved long-term functional outcomes when compared to acute partial or complete wrist arthrodesis.

Outcome following distally locked volar plating for distal radius fractures with metadiaphyseal involvement.

BACKGROUND: The surgical treatment of metadiaphyseal distal radius fractures may be difficult due to the associated articular or periarticular extension that limits standard fixation techniques. Longer distal radius volar locking plates allow stable fixation of the distal fragments while providing standard plate fixation in the proximal radius. We hypothesize that this plating technique allows adequate fixation to both the distal radius and metadiaphyseal fragments. The purpose of the study is to describe the outcomes, radiographic parameters, secondary surgeries, and complication rate with this device. METHODS: A retrospective chart review was conducted on adult patients with a distal radius fracture and metadiaphyseal involvement treated with a volar, distally locked plate. All patients were followed up for radiographic union, with a mean time of 219 days (range 38-575). Fracture patterns, outcomes of range of motion, grip strength, and complications, as well as injury, post open reduction and internal fixation (ORIF), and finally, healed radiographic parameters were recorded. RESULTS: Twenty patients with 21 fractures were included. At union, mean radiographic parameters were the following: volar tilt of 8°, radial inclination of 27°, radial height of 14 mm, and ulnar variance of -1 mm. The mean final range of motion was 52° flexion, 50° extension, 68° pronation, and 66° supination. Complications included one infection and one plate removal. Four patients developed a nonunion requiring secondary procedures. There were no incidents of hardware failure or adhesions requiring tenolysis. CONCLUSION: Distally locked long volar plating for metadiaphyseal distal radius fractures is a safe and effective treatment option for these complex fracture patterns allowing anatomic restoration of the radial shaft and distal radius.

Distal radius fractures and the volar lunate facet fragment: Kirschner wire fixation in addition to volar-locked plating.

BACKGROUND: The volar lunate facet fragment of a distal radius fracture may not be stabilized with volar-locked plating alone due to the small size and distal location of the fragment. Identification and stabilization of this small fragment is critical as unstable fixation may result in radiocarpal and radioulnar joint subluxation. The addition of spring wire fixation with volar plating can provide stable internal fixation of this critical fracture fragment. METHODS: A retrospective review (2006-2011) identified nine patients with distal radius fractures with an associated volar lunate facet fragment that were treated with volar-locked plating and spring wire fixation of the volar lunate facet fragment. Radiographic indices, range of motion, grip strength, and postoperative Patient-related wrist evaluation (PRWE) scores were obtained to assess pain and function. RESULTS: All distal radius fractures healed, and the volar lunate facet fragment reduction was maintained. The mean follow-up was 54 weeks. Mean active range of motion was 46° wrist flexion, 51° wrist extension, 80° pronation, and 68° supination. The mean grip strength was 21 Kg, achieving 66 % of the uninjured limb. The average PRWE score was 17. No patient required removal of hardware or had evidence of tendon irritation. CONCLUSIONS: The addition of spring wire fixation to volar-locked plating provided stable fixation of the volar lunate facet fragment of distal radius fractures without complication. This technique addresses a limitation of volar-locked plating to control the small volar lunate facet fragment in distal radius fractures otherwise amenable to volar plating. LEVEL OF EVIDENCE: A retrospective case series, Level IV.

Scapula fractures: interobserver reliability of classification and treatment.

OBJECTIVES: There is substantial variation in the classification and management of scapula fractures. The first purpose of this study was to analyze the interobserver reliability of the OTA/AO classification and the New International Classification for Scapula Fractures. The second purpose was to assess the proportion of agreement among orthopaedic surgeons on operative or nonoperative treatment. DESIGN: Web-based reliability study. SETTING: Independent orthopaedic surgeons from several countries were invited to classify scapular fractures in an online survey. PARTICIPANTS: One hundred three orthopaedic surgeons evaluated 35 movies of three-dimensional computerized tomography reconstruction of selected scapular fractures, representing a full spectrum of fracture patterns. MAIN OUTCOME MEASUREMENTS: Fleiss kappa (κ) was used to assess the reliability of agreement between the surgeons. RESULTS: The overall agreement on the OTA/AO classification was moderate for the types (A, B, and C, κ = 0.54) with a 71% proportion of rater agreement (PA) and for the 9 groups (A1 to C3, κ = 0.47) with a 57% PA. For the New International Classification, the agreement about the intraarticular extension of the fracture (Fossa (F), κ = 0.79) was substantial and the agreement about a fractured body (Body (B), κ = 0.57) or process was moderate (Process (P), κ = 0.53); however, PAs were more than 81%. The agreement on the treatment recommendation was moderate (κ = 0.57) with a 73% PA. CONCLUSIONS: The New International Classification was more reliable. Body and process fractures generated more disagreement than intraarticular fractures and need further clear definitions.

Avoiding and treating perioperative complications of distal radius fractures.

Numerous methods of treatment are available for the management of distal radius fractures, with modern trends favoring volar fixed-angle distal radius plates. Whatever the method of fixation, recognition, management, and prevention of the known associated complications are essential to achieve a good outcome. This article reviews the common preventable complications that are associated with operative treatment of distal radius fractures, including tendon injuries, inadequate reduction, subsidence or collapse, intra-articular placement of pegs or screws, nerve injuries, complex regional pain syndrome, carpal tunnel syndrome, and compartment syndrome.

Acute dislocations of the distal radioulnar joint and distal ulna fractures.

This article reviews acute dislocations of the distal radioulnar joint (DRUJ) and distal ulna fractures. Acute dislocations can occur in isolation or in association with a fracture to the distal radius, radial metadiaphysis (Galeazzi fracture), or radial head (Essex-Lopresti injury). Distal ulna fractures may occur in isolation or in combination with a distal radius fracture. Both injury patterns are associated with high energy. Outcomes are predicated on anatomic reduction and restoration of the stability of the DRUJ.

Lateral tilt wrist radiograph using the contralateral hand to position the wrist after volar plating of distal radius fractures.

PURPOSE: Lateral tilt (radially inclined) radiographs are useful after volar locked plate fixation of distal radius fractures to assess the radiocarpal joint, subchondral bone congruity, and volar tilt. The purpose of our study was to define the reliability of our positioning method using the patient's opposite hand to position the injured wrist to obtain an inclined lateral radiograph with good visualization of the subchondral bone. METHODS: A retrospective review identified adult patients who had a unilateral distal radius fracture treated with a volar locked plate and who had an initial postoperative lateral tilt radiograph using the contralateral hand to position the injured wrist. Intraoperative fluoroscopic images were reviewed to confirm the ability to see the extra-articular placement of all hardware. The inclined lateral wrist radiograph was obtained by positioning the injured wrist at a height determined by the contralateral hand being placed under the ulnar wrist crease. The wrist was then supported there with firm blocks in all cases. The radiographic beam was directed perpendicular to the horizontal cassette. Two reviewers (authors) then blindly reviewed postoperative radiographs to determine whether the radiocarpal joint and subchondral bone were visualized and whether any screws or pegs appeared to cross the radiocarpal joint. An acceptable lateral tilt radiograph was defined as good visualization of the subchondral bone while allowing only the most radial peg to appear to cross the joint. We also placed 15 normal volunteers into the lateral tilt position, using their opposite hand, to measure the inclined forearm angle. RESULTS: A total of 24 wrists (24 patients) were identified and 23 patients had lateral tilt radiographs with acceptable visualization of the subchondral bone. The concordance of the subchondral bone visualization was 100% (95% confidence interval, 85.5% to 100%). The mean angle with lateral tilt positioning was 18 degrees from horizontal (range, 15 degrees to 23 degrees; standard deviation, 2.4 degrees). CONCLUSIONS: Using the contralateral hand to position the lateral inclined view, our lateral tilt position produced radiographs with reliable visualization of the distal radius subchondral bone in 96% of our cases. Visualization of the subchondral bone in the region of the radial aspect of the scaphoid fossa requires more tilt than is achieved with this technique.

Acute trauma to the upper extremity: what to do and when to do it.

The management of acute trauma to the upper extremity includes the urgent treatment of injuries and the timing and choice of surgical stabilization and reconstruction. To evaluate and treat severe upper extremity trauma, the orthopaedic surgeon should understand the principles of emergency department and operating theater management of commonly seen traumatic injuries to the distal humerus, elbow, forearm, wrist, and hand. A review of the principles for treating these complex injuries, including principles of soft-tissue coverage, will aid surgeons in achieving the goal of providing optimal treatment for their patients.

The economic impact of electric saw injuries to the hand.

PURPOSE: Injuries from electric saws cause considerable hand trauma. This study is designed to provide information detailing the costs of these injuries. METHODS: The study was performed in a tertiary referral academic medical center. The records of patients injured by electric table saws were reviewed. Information regarding demographics, injury severity, medical expense, and time lost from work was analyzed. The patients were stratified by injury severity for further analysis. The mean wage for the region was used to estimate costs of time away from work. The Consumer Protection Agency's review was used to estimate the nationwide burden of these injuries. RESULTS: The study group included 134 patients. Of these patients, 126 were male and 8 were female. The dominant hand was injured in 20; the nondominant, in 114. The mean age was 47.0 years. The mean time lost from work was 64 days. The mean cost of medical expenses for all patients was $22,086, with $8,668 in lost wages, for a total of $30,754 mean cost per injury. The total economic burden for the injuries in this study is $4,121,097. These injuries represent a spectrum of severity, with minor injuries incurring lower hospital fees and requiring less time off work as compared to more involved injuries. CONCLUSIONS: Electric saws cause a wide spectrum of injuries that result in not only tremendous physical and emotional pain but also substantial economic impact as well. Technologies that would prevent such injuries would be a socioeconomic advancement. Federal mandates to implement such technologies should be encouraged.

Fixed-angle volar plate fixation for distal radius fractures in immunosuppressed patients.

The aim of this study was to define the outcome and complications following open reduction and internal fixed-angle plating of distal radius fractures for patients on chronic immunosuppression medications. A retrospective study identified 11 patients with distal radius fractures that had been on chronic immunosuppressive medication. The mean patient age was 59.9 years (40-82 years). According to the Orthopedic Trauma Association classification, there was one 23A3, one 23B3, and nine 23C type fractures. There were two open fractures. All patients received preoperative antibiotics and underwent reduction and fixation with a volar, fixed-angle plate. Postoperative measurements included postoperative and final radiographic indices, wrist flexion and extension, forearm rotation, and grip strength. Clinical follow-up averaged 13 months, and radiographic follow-up averaged 14.9 months. Statistical analysis was performed comparing means of various parameters with a two-sided t test with an alpha value < or = 0.05. All fractures healed, and there were no infections. The final mean ulnar variance, volar tilt, and radial inclination were -0.1 mm (ulnar negative; -2.0 to +2.5 mm), 13 degrees (5-23 degrees), and 21 degrees (15-27 degrees), respectively. The mean articular gap or step was 0.4 mm. There was a small but significant decrease between the final and postoperative mean ulnar variance (p = 0.03). Mean wrist flexion was 47 degrees, extension 47 degrees , pronation 77 degrees, and supination was 76 degrees. Grip strength averaged 16.3 kg versus 25.1 kg for the opposite extremity. The one major complication included a postoperative carpal tunnel syndrome. Fixed-angle volar plate fixation for distal radius fractures in patients with chronic immunosuppression was associated with union (with acceptable radiographic alignment), no wound-healing problems or infections, and with functional wrist and forearm motion and grip strength.

A complete radial collateral ligament avulsion of the small finger metacarpophalangeal joint with displacement through the radial sagittal band.

A displaced complete radial collateral ligament avulsion with associated injury to the sagittal band of the metacarpophalangeal joint of the small finger, if left untreated, may result in chronic pain, instability, weakness, and deformity. A case of a displaced radial collateral ligament that ruptured through the radial sagittal band of the small finger, with resultant injury to the extensor mechanism, is described and discussed with a review of the literature. Proper identification of this injury by physical exam and imaging studies along with surgical repair is associated with good outcome.

Open reduction and internal locked fixation of unstable distal ulna fractures with concomitant distal radius fracture.

PURPOSE: To evaluate the results following locking plate fixation of unstable distal ulna fractures with concomitant distal radius fracture. METHODS: A retrospective review was conducted to identify patients who had been treated with a locking plate for unstable displaced fractures of the distal ulna in which a concomitant ipsilateral distal radius fracture was also treated operatively. Medical records and radiographs were reviewed, and 5 patients were identified with an average age of 52 years (range, 47-61 years) and with follow-up averaging 11.6 months (range, 6-17 months). There were 2 open and 3 closed fractures. Included was 1 simple neck, 1 comminuted neck, 1 head, and 2 head and neck fractures of the distal ulna. All distal radius fracture implants were locked volar plates. RESULTS: All distal ulna and distal radius fractures united, and the average motion was: flexion 59 degrees ; extension 59 degrees ; pronation 67 degrees ; and supination 72 degrees . Average grip strength was 97% of the opposite extremity. Final ulnar variance averaged -0.4 mm (ulnar negative), radial inclination was 20 degrees , and volar tilt was 8 degrees . All distal radioulnar joints were stable. Two patients had mild, transient paresthesias of the dorsal sensory branch of the ulnar nerve, and both patients recovered completely within 3 months. There were no subsequent surgeries or hardware failures. There were no infections and no wound problems. Based upon the Sarmiento modification of the Gartland and Werley rating score, there were 4 excellent results and 1 good result. CONCLUSIONS: Locked plating of unstable distal ulna fractures, in the setting of an associated distal radius fracture, resulted in union, good to excellent alignment and motion, nearly symmetric grip strength, and minimal transient morbidity.