A Prototype of an Electromagnetic Induction Sensor for Non-Destructive Estimation of the Presence of Corrosive Chemicals Ensuing Concrete Corrosion.

The corrosion of steel reinforcement in concrete often leads to huge unbudgeted expenses for maintaining, monitoring and renovating an infrastructure. This is mainly due to the presence of salts or chemical chlorides that pose a danger to the concrete structures. The determination of the existence of these corrosive salts is vital for defining the service life of concrete. This research looked at developing an electromagnetic induction (EMI) sensor for the detection of corrosive salts. The first design adopted a single-loop coil (SLC) concept, and the second was based on a multiple-loop coil (MLC) one using copper wire. Tests were conducted on these two techniques, and with the results obtained, the latter seemed more promising; thus, a prototype sensor was developed using the MLC concept. As this new prototype sensor was able to detect the manifestation of chemical contents in a concrete structure, it could be used as a non-destructive evaluation (NDE) technique for the detection of corrosive chemicals in concrete and has the further possibility of detecting corrosion in concrete.

Leak Detection in Water Pipes Using Submersible Optical Optic-Based Pressure Sensor.

Leakage is undesirable in water distribution networks, as leaky pipes are financially costly both to water utilities and consumers. The ability to detect, locate, and quantify leaks can significantly improve the service delivered. Optical fibre sensors (OFS) have previously demonstrated their capabilities in performing real-time and continuous monitoring of pipe strength leak detection. However, the challenge remains due to the high labour cost and time-consuming process for the installation of optical fibre sensors to existing buried pipelines. The aim of this paper is to evaluate the feasibility of a submersible optical fibre-based pressure sensor that can be deployed without rigid bonding to the pipeline. This paper presents a set of experiments conducted using the proposed sensing strategy for leak detection. The calibrated optical fibre device was used to monitor the internal water pressure in a pipe with simultaneous verification from a pressure gauge. Two different pressure-based leak detection methods were explored. These leak detection methods were based on hydrostatic and pressure transient responses of the optical fibre pressure sensor. Experimental results aided in evaluating the functionality, reliability, and robustness of the submersible optical fibre pressure sensor.