[Cr(ttpy)2]3+ as a multi-electron reservoir for photoinduced charge accumulation.

[Cr(ttpy)2]3+ (ttpy = 4'-(4-methylphenyl)-2,2':6,2''-terpyridine) exhibits rich electrochemical and photophysical properties. Cyclic voltammetry performed in CH3CN shows in the cathodic part the presence of three one-electron reversible systems at -0.47, -0.85 and -1.35 V vs. Ag/AgNO3 10-2 M. These systems are attributed to the reduction of the terpyridine ligands with a partial delocalization of the charge on the tolyl for the last reduction event. The three different reduced species were generated by exhaustive electrolysis and characterized by EPR and UV-visible spectroscopy; DFT calculations were performed to locate the spin density of the electrons added during the reduction. Visible light irradiation of [Cr(ttpy)2]3+ induces the population of a luminescent metal-centered excited state with a lifetime of 270 ns in deoxygenated CH3CN. This excited state can be quenched by an electron transfer process with triphenylphosphine (PPh3) or triethanolamine (TEOA). Using TEOA as a sacrificial electron donor, the doubly reduced species (i.e.[Cr(ttpy)2] +) can be generated under continuous irradiation. In the presence of [Ru(bpy)3]2+ as an additional photosensitizer, the photoreduction of [Cr(ttpy)2]3+ towards [Cr(ttpy)2]+ is accelerated. The trinuclear [{RuII(bpy)2(bpy-O-tpy)}2CrIII]7+ complex ([Ru2Cr]7+) in which a CrIII-bis-terpyridine centre is covalently linked to two RuII-tris-bipyridine moieties by oxo bridges has been synthesised. Its electrochemical, photophysical and photochemical properties were investigated in deoxygenated CH3CN. Cyclic voltammetry indicates only a poor electronic communication between the different subunits, whereas luminescence experiments show a strong quenching of the RuII* excited state by an intramolecular process. Continuous irradiation of [Ru2Cr]7+ under visible conditions in the presence of TEOA leads to [Ru2Cr]4+ where three electrons are stored on the [Cr(ttpy)] subunit.

Electrochemical Generation and Spectroscopic Characterization of the Key Rhodium(III) Hydride Intermediates of Rhodium Poly(bipyridyl) H2-Evolving Catalysts.

We previously reported that the [RhIII(dmbpy)2Cl2]+ (dmbpy = 4,4'-dimethyl-2,2'-bipyridine) complex is an efficient H2-evolving catalyst in water when used in a molecular homogeneous photocatalytic system for hydrogen production with [RuII(bpy)3]2+ (bpy = 2,2'-bipyridine) as photosensitizer and ascorbic acid as sacrificial electron donor. The catalysis is believed to proceed via a two-electron reduction of the Rh(III) catalyst into the square-planar [RhI(dmbpy)2]+, which reacts with protons to form a Rh(III) hydride intermediate that can, in turn, release H2 following different pathways. To improve the current knowledge of these key intermediate species for H2 production, we performed herein a detailed electrochemical investigation of the [RhIII(dmbpy)2Cl2]+ and [RhIII(dtBubpy)2Cl2]+ (dtBubpy = 4,4'-di- tert-butyl-2,2'-bipyridine) complexes in CH3CN, which is a more appropriate medium than water to obtain reliable electrochemical data. The low-valent [RhI(Rbpy)2]+ and, more importantly, the hydride [RhIII(Rbpy)2(H)Cl]+ species (R = dm or dtBu) were successfully electrogenerated by bulk electrolysis and unambiguously spectroscopically characterized. The quantitative formation of the hydrides was achieved in the presence of weak proton sources (HCOOH or CF3CO3H), owing to the fast reaction of the electrogenerated [RhI(Rbpy)2]+ species with protons. Interestingly, the hydrides are more difficult to reduce than the initial Rh(III) bis-chloro complexes by ∼310-340 mV. Besides, 0.5 equiv of H2 is generated through their electrochemical reduction, showing that Rh(III) hydrides are the initial catalytic molecular species for hydrogen evolution. Density functional theory calculations were also performed for the dmbpy derivative. The optimized structures and the theoretical absorption spectra were calculated for the initial bis-chloro complex and for the various rhodium intermediates involved in the H2 evolution process.

Photoinduced Charge Separation within Metallo-supramolecular Wires Built around a [Ru(bpy)3](2+)-Bisterpyridine Linear Entity.

A [Ru(bpy)3](2+)-like complex (L1) bearing two free terpyridine groups at the 5 and 5' positions of the same bipyridine, linked by the rigid and linear 2,5-dimethyl phenylene bridges has been synthesized to open access to two classes of linear molecular wires with photosensitive properties: a bimetallic coordination polymer and an inorganic triad. In this Research Article, we report on the synthesis and characterization of the resulting [{Ru(II_)Fe(II)}n](4n+) alternated bimetallic polymer and the [Co(III_)Ru(II_)Fe(II)](7+) triad based on the building block L1. The [{Ru(II_)Fe(II)}n](4n+) polymer is fully characterized in solution. Cyclic voltammetry and emission lifetime measurements show that the bridging ligand allows interaction between the metal centers in the excited state despite the lack of interactions in the ground state. Under visible irradiation, the polymer can be fully oxidized in the presence of a sacrificial electron acceptor in solution. Thin robust films of the polymer are easily obtained on ITO by a simple electrochemical procedure based on an electroreduction adsorption process. The ITO/[{Ru(II_)Fe(II)}n](4n+)-modified electrode behaves as a photocathode under irradiation in the presence of ArN2(+). The magnitude of the photocurrent is dependent on the film thickness, probably limited by the diffusion of charge in thicker film. On the other hand L1 is also used to construct a well-ordered triad in association with Co(III) and Fe(II) metallic centers as electron acceptor and donor, respectively. The metallic triad is anchored on ITO or on a SiO2 wafer, starting from a terpyridine phosphonate modified surface. AFM images prove the presence of the triad in a linear upward orientation. Irradiation of the ITO/[Co(III_)Ru(II_)Fe(II)](7+) modified surface in the presence of triethanolamine in CH3CN induces the generation of an anodic photocurrent of around 30 µA.cm(-2). The photocurrent density generated by the ITO/[Co(III_)Ru(II_)Fe(II)](7+) electrode, appears to be more stable than in the case of ITO/[{Ru(II_)Fe(II)}n](4n+) because of the presence of the anchoring group. Moreover, this photocurrent magnitude represents an enhancement of 30% compared to our previous triad ( Dalton Trans. 2014 , 43 , 12156 - 12159 ), proving the advantage of a linear and rigid spacer for the construction of such molecular assemblies with photoinduced charge transfer abilities.

Electrocatalytic Hydrogen Evolution from Molybdenum Sulfide-Polymer Composite Films on Carbon Electrodes.

The design of more efficient catalytic electrodes remains an important objective for the development of water splitting electrolyzers. In this context a structured composite cathode material has been synthesized by electrodeposition of molybdenum sulfide (MoSx) into a poly(pyrrole-alkylammonium) matrix, previously coated onto carbon electrodes by oxidative electropolymerization of a pyrrole-alkylammonium monomer. The composite material showed an efficient electrocatalytic activity toward proton reduction and the hydrogen evolution reaction (HER). Data from Tafel plots have demonstrated that the electron transfer rate in the composite films is fast, in agreement with the high catalytic activity of this cathode material. Bulk electrolysis of acidic water at carbon foam electrodes modified with the composite have shown that the cathodes display a high catalytic activity and a reasonable operational stability, largely exceeding that of regular amorphous MoSx electrodeposited on naked carbon foam. The enhanced catalytic performances of the composite electrode material were attributed to the structuration of the composite, which led to a homogeneous distribution of the catalyst on the carbon foam network, as shown by SEM characterizations.

A computational mechanistic investigation of hydrogen production in water using the [Rh(III)(dmbpy)2Cl2](+)/[Ru(II)(bpy)3](2+)/ascorbic acid photocatalytic system.

We recently reported an efficient molecular homogeneous photocatalytic system for hydrogen (H2) production in water combining [Rh(III)(dmbpy)2Cl2](+) (dmbpy = 4,4'-dimethyl-2,2'-bipyridine) as a H2 evolving catalyst, [Ru(II)(bpy)3](2+) (bpy = 2,2'-bipyridine) as a photosensitizer and ascorbic acid as a sacrificial electron donor (Chem. - Eur. J., 2013, 19, 781). Herein, the possible rhodium intermediates and mechanistic pathways for H2 production with this system were investigated at DFT/B3LYP level of theory and the most probable reaction pathways were proposed. The calculations confirmed that the initial step of the mechanism is a reductive quenching of the excited state of the Ru photosensitizer by ascorbate, affording the reduced [Ru(II)(bpy)2(bpy˙(-))](+) form, which is capable, in turn, of reducing the Rh(III) catalyst to the distorted square planar [Rh(I)(dmbpy)2](+) species. This two-electron reduction by [Ru(II)(bpy)2(bpy˙(-))](+) is sequential and occurs according to an ECEC mechanism which involves the release of one chloride after each one-electron reduction step of the Rh catalyst. The mechanism of disproportionation of the intermediate Rh(II) species, much less thermodynamically favoured, cannot be barely ruled out since it could also be favoured from a kinetic point of view. The Rh(I) catalyst reacts with H3O(+) to generate the hexa-coordinated hydride [Rh(III)(H)(dmbpy)2(X)](n+) (X = Cl(-) or H2O), as the key intermediate for H2 release. The DFT study also revealed that the real source of protons for the hydride formation as well as the subsequent step of H2 evolution is H3O(+) rather than ascorbic acid, even if the latter does govern the pH of the aqueous solution. Besides, the calculations have shown that H2 is preferentially released through an heterolytic mechanism by reaction of the Rh(III)(H) hydride and H3O(+); the homolytic pathway, involving the reaction of two Rh(III)(H) hydrides, being clearly less favoured. In parallel to this mechanism, the reduction of the Rh(III)(H) hydride into the penta-coordinated species [Rh(II)(H)(dmbpy)2](+) by [Ru(II)(bpy)2(bpy˙(-))](+) is also possible, according to the potentials of the respective species determined experimentally and this is confirmed by the calculations. From this Rh(II)(H) species, the heterolytic and homolytic pathways are both thermodynamically favourable to produce H2 confirming that Rh(II)(H) is as reactive as Rh(III)(H) towards the production of H2.

Polypyrrole-Ru(2,2'-bipyridine)3(2+)/MoSx structured composite film as a photocathode for the hydrogen evolution reaction.

The development of photoelectrochemical devices for solar light-driven water splitting and H2 production requires new strategies for the fabrication of materials that combine the necessary photoredox and catalytic properties, to allow the hydrogen evolution reaction (HER) to take place at a low overvoltage under visible light irradiation. We report the first example of a structured composite, synthesized by electrodeposition of MoSx cocatalyst into a photosensitive Ru complex film deposited onto carbon electrodes by electropolymerization of a pyrrole-functionalized Ru(II)(2,2'-bipyridine)3(2+). Composite films show efficient photocatalytic activity for HER. Our study highlights the great simplicity of this versatile electrochemical procedure to synthesize photocathodes.

Iridium oxide-polymer nanocomposite electrode materials for water oxidation.

Nanocomposite anode materials for water oxidation have been readily synthesized by electrodeposition of iridium oxide nanoparticles into poly(pyrrole-alkylammonium) films, previously deposited onto carbon electrodes by oxidative electropolymerization of a pyrrole-alkylammonium monomer. The nanocomposite films were characterized by electrochemistry, transmission electron microscopy, and atomic force microscopy. They showed an efficient electrocatalytic activity toward the oxygen evolution reaction. Data from Tafel plots have demonstrated that the catalytic activity of the iridium oxide nanoparticles is maintained following their inclusion in the polymer matrix. Bulk electrolysis of water at carbon foam modified electrodes have shown that the iridium oxide-polymer composite presents a higher catalytic activity and a better operational stability than regular oxide films.

Photoelectric conversion at a [Ru(bpy)3](2+)-based metallic triad anchored on ITO surface.

A tri-metallic triad based on a [Ru(bpy)3](2+) moiety connected to Fe(ii) and Co(iii) bisterpyridine has been grafted on an ITO electrode by a stepwise procedure. Under visible light, in the presence of a sacrificial electron donor, the system produces electric current. The photo-current magnitude is compared to the one generated from a Co(iii)-Ru(ii) dyad and shows an increase of 40%.

Efficient and limiting reactions in aqueous light-induced hydrogen evolution systems using molecular catalysts and quantum dots.

Hydrogen produced from water and solar energy holds much promise for decreasing the fossil fuel dependence. It has recently been proven that the use of quantum dots as light harvesters in combination with catalysts is a valuable strategy to obtain photogenerated hydrogen. However, the light to hydrogen conversion efficiency of these systems is reported to be lower than 40%. The low conversion efficiency is mainly due to losses occurring at the different interfacial charge-transfer reactions taking place in the multicomponent system during illumination. In this work we have analyzed all the involved reactions in the hydrogen evolution catalysis of a model system composed of CdTe quantum dots, a molecular cobalt catalyst and vitamin C as sacrificial electron donor. The results demonstrate that the electron transfer from the quantum dots to the catalyst occurs fast enough and efficiently (nanosecond time scale), while the back electron transfer and catalysis are much slower (millisecond and microsecond time scales). Further improvements of the photodriven proton reduction should focus on the catalytic rate enhancement, which should be at least in the hundreds of nanoseconds time scale.

An efficient Ru(II) -Rh(III) -Ru(II) polypyridyl photocatalyst for visible-light-driven hydrogen production in aqueous solution.

The development of multicomponent molecular systems for the photocatalytic reduction of water to hydrogen has experienced considerable growth since the end of the 1970s. Recently, with the aim of improving the efficiency of the catalysis, single-component photocatalysts have been developed in which the photosensitizer is chemically coupled to the hydrogen-evolving catalyst in the same molecule through a bridging ligand. Until now, none of these photocatalysts has operated efficiently in pure aqueous solution: a highly desirable medium for energy-conversion applications. Herein, we introduce a new ruthenium-rhodium polypyridyl complex as the first efficient homogeneous photocatalyst for H2 production in water with turnover numbers of several hundred. This study also demonstrates unambiguously that the catalytic performance of such systems linked through a nonconjugated bridge is significantly improved as compared to that of a mixture of the separate components.

Manganese carbonyl terpyridyl complexes: their synthesis, characterization and potential application as CO-release molecules.

Mn(I) carbonyl terpyridyl complexes have been synthesized and characterized. The tricarbonyl derivative exhibits interesting behaviors for controlled CO-release by both thermal and photosynthetic pathways.

Long-Lived Charge Separated State in NiO-Based p-Type Dye-Sensitized Solar Cells with Simple Cyclometalated Iridium Complexes.

Three new cyclometalated iridium complexes were prepared and investigated on nanocrystalline NiO cathodes. Nanosecond transient absorption spectroscopy experiments show they present a surprisingly slow geminate charge recombination upon excitation on NiO, representing thus the first examples of simple sensitizers with such feature. These complexes were used in dye-sensitized solar cells using nanocrystalline NiO film as semiconductor. The long-lived charge separated state of these Ir complexes make them compatible with other redox mediators than I3(-)/I(-), such as a cobalt electrolyte and enable to reach significantly high open circuit voltage.

Pulsed-EPR evidence of a manganese(II) hydroxycarbonyl intermediate in the electrocatalytic reduction of carbon dioxide by a manganese bipyridyl derivative.

A key intermediate in the electroconversion of carbon dioxide to carbon monoxide, catalyzed by a manganese tris(carbonyl) complex, is characterized. Different catalytic pathways and their potential reaction mechanisms are investigated using a large range of experimental and computational techniques. Sophisticated spectroscopic methods including UV/Vis absorption and pulsed-EPR techniques (2P-ESEEM and HYSCORE) were combined together with DFT calculations to successfully identify a key intermediate in the catalytic cycle of CO2 reduction. The results directly show the formation of a metal-carboxylic acid-CO2 adduct after oxidative addition of CO2 and H(+) to a Mn(0) carbonyl dimer, an unexpected intermediate.

Excited-state spectroscopic investigations of multinuclear complexes based on [Ru(bpy)3](2+) moieties connected to 2,2'-bipyridine and 2,2';6',2''-terpyridine ligands.

A number of multinuclear assemblies based on [Ru(bpy)3](2+) photosensitive moieties covalently linked to Fe(II), Co(II) or Zn(II) polypyridyl complexes are investigated regarding their initial and thermally equilibrated excited states. Ground state absorption and vibrational spectroscopic techniques are carried out, along with resonance Raman, transient absorption, and time resolved resonance Raman measurements. These methods are also supplemented by computational modelling. In all systems, the results clearly show that under visible irradiation, the substituted bpy linker ligand is involved in the initial (1)MLCT excitation of the Ru(II) subunit. For the Ru(II)/Fe(II) linked assemblies, absorption due to [Ru(bpy)3](2+) and [Fe(tpy)2](2+) subunits are identified to give rise to differing resonance Raman spectra. Transient absorption spectra of complexes containing two [Ru(bpy)3](2+) and one [Fe(tpy)2](2+) subunits show a strong depletion for the [Fe(tpy)2](2+) absorption peaks, which decay on a much faster timescale than the remainder of the transient features. This is consistent with a single excitation of the multimetallic assembly, followed by fast depletion (<10 ns) of the spectral signal from the bpy ligand bound to the Fe subunit. The results are supported by time resolved resonance Raman measurements where a number of features assigned to the linker are found at early time-scales. Using transient absorption this process can be followed for most complexes.

Efficient photocatalytic hydrogen production in water using a cobalt(III) tetraaza-macrocyclic catalyst: electrochemical generation of the low-valent Co(I) species and its reactivity toward proton reduction.

A very efficient homogeneous system for visible-light driven hydrogen production in water is reported. This comprises the [Co(CR)Cl2](+) cobalt(III) tetraaza-macrocyclic complex (Cat1) as a noble metal-free catalyst, [Ru(bpy)3]Cl2 as a photosensitizer and ascorbate/ascorbic acid as a sacrificial electron donor and buffer. This system gives up to 1000 turnovers at pH 4.0 versus the catalyst with a relatively low photosensitizer/catalyst ratio (10/1) and a high concentration of catalyst (1 × 10(−4) M), thus producing a significant amount of H2 (12.3 mL for 5 mL of solution). It also exhibits long-term stability (more than 20 hours). The efficiency of Cat1 has been compared under the same experimental conditions to those of three other H2-evolving catalysts, which are known to operate in water, [Co{(DO)(DOH)pn}Br2] (Cat2), [Co(dmbpy)3]Cl2 (Cat3) and [Rh(dmbpy)2Cl2]Cl (Cat4). These comparative studies show that Cat4, although based on a noble metal, is about four times less active, while Cat2 and Cat3 produce more than one hundred times less hydrogen than Cat1. The low-valent CoI form of Cat1 has been successfully electrogenerated in CH3CN. Its high stability can be related to the high catalytic performance of the Cat1 system. We have also shown that in acidic aqueous solution (photocatalytic conditions) reduction at a slightly more negative potential than the Co(II)/Co(I) couple is needed to ensure efficient catalysis; this reduction is performed by the photogenerated [Ru(II)(bpy)2(bpy(˙−))](+) species.

[Rh(III)(dmbpy)2Cl2]+ as a highly efficient catalyst for visible-light-driven hydrogen production in pure water: comparison with other rhodium catalysts.

We report a very efficient homogeneous system for the visible-light-driven hydrogen production in pure aqueous solution at room temperature. This comprises [Rh(III) (dmbpy)(2)Cl(2)]Cl (1) as catalyst, [Ru(bpy)(3)]Cl(2) (PS1) as photosensitizer, and ascorbate as sacrificial electron donor. Comparative studies in aqueous solutions also performed with other known rhodium catalysts, or with an iridium photosensitizer, show that 1) the PS1/1/ascorbate/ascorbic acid system is by far the most active rhodium-based homogeneous photocatalytic system for hydrogen production in a purely aqueous medium when compared to the previously reported rhodium catalysts, Na(3)[Rh(I) (dpm)(3)Cl] and [Rh(III)(bpy)Cp*(H(2)O)]SO(4) and 2) the system is less efficient when [Ir(III) (ppy)(2)(bpy)]Cl(PS2) is used as photosensitizer. Because catalyst 1 is the most efficient rhodium-based H(2)-evolving catalyst in water, the performance limits of this complex were further investigated by varying the PS1/1 ratio at pH 4.0. Under optimal conditions, the system gives up to 1010 turnovers versus the catalyst with an initial turnover frequency as high as 857 TON h(-1). Nanosecond transient absorption spectroscopy measurements show that the initial step of the photocatalytic H(2)-evolution mechanism is a reductive quenching of the PS1 excited state by ascorbate, leading to the reduced form of PS1, which is then able to reduce [Rh(III)(dmbpy)(2)Cl(2)](+) to [Rh(I)(dmbpy)(2)](+). This reduced species can react with protons to yield the hydride [Rh(III)(H)(dmbpy)(2)(H(2)O)](2+), which is the key intermediate for the H(2) production.

One-step vs stepwise immobilization of 1-D coordination-based Rh-Rh molecular wires on gold surfaces.

Reaction of dimeric [Rh(II)(2)(phen)(2)(µ-OAc)(2)(MeCN)(2)](BF(4))(2) (phen =1,10-phenanthroline) with pyrazine (pz) in a 1:2 ratio leads to the new 1-D metal-metal-bonded coordination oligomer {[Rh(II)(2)(phen)(2)(µ-OAc)(2)(pz)](BF(4))(2)}(n) (Rh-Rhpz)(n) (1), where each Rh atom of the dimeric unit (Rh-Rh) is coordinated in the equatorial plane to a nitrogen atom of a rigid and linear bifunctionalized organic linker (pz). Single X-ray diffraction analysis reveals the 1-D straight oligomeric chain structure (molecular wire, MW) consists of alternating (Rh-Rh) units and pz linking ligands with free BF(4)(-) as counteranions, and each metal center has a slightly distorted octahedral arrangement. The presence of accessible labile MeCN groups on both ends of these MWs ("free ends") enables functionalization of a 4-mercaptopyridine-gold coordinating platform (Au/MP) to form in one step a layer of coordination oligomer (Au/MP(Rh-Rhpz)(n); n ≈ 50). Furthermore (Rh-Rhpz)(n) (n = 1-6) MWs were grafted to Au/MP surfaces by a conventional step-by-step assembly construction involving coordination reactions between the Rh dimer ([Rh(2)(phen)(2)(µ-OAc)(2)(MeCN)(2)](BF(4))(2) (2)) and pz. A detailed physicochemical study (UV-vis, RAIR, QCM-D, ellipsometry, contact angle measurements, as well as impedance spectroscopy and cyclic voltammetry) has been made during both assembly methods to characterize the resulting surface-anchored coordination molecular wire (CMW) layers (Au/MP(Rh-Rhpz)(n)). The results indicate that the immobilized molecular assemblies (MAs) were successfully fabricated using both methods of assembly. The efficiency of the two methods is discussed.

An original electrochemical method for assembling multilayers of terpyridine-based metallic complexes on a gold surface.

A new method based on the electrochemical oxidation of thiols was used to easily generate multilayer assemblies of coordination complexes on a gold surface. For this purpose, two complexes bearing two anchoring groups for surface attachment have been prepared: [Ru(tpySH)(2)](2+) (1) and [Fe(tpySH)(2)](2+) (2) (tpySH = 4'-(2-(p-phenoxy)ethanethiol)-2,2':6',2″-terpyridine). Cyclic voltammetry of 1 in CH(3)CN exhibits two successive oxidation processes. The first is irreversible and attributed to the oxidation of the thiol substituents, whereas the second is reversible and corresponds to the 1 e(-) metal-centered oxidation. In the case of 2 both processes are superimposed. Monolayers of 1 or 2 have been formed on gold electrodes by spontaneous adsorption from micromolar solutions of the complexes in CH(3)CN. SAMs (self-assembled monolayers) exhibit redox behavior similar to the complexes in solution. The high surface coverage value obtained (Γ = 6 × 10(-10) and 4 × 10(-10) mol cm(-2) for 1 and 2, respectively) is consistent with a vertical orientation for the complexes; thus, one thiol is bound to the gold electrode, with the second unreacted thiol moiety exposed to the outer surface. Successive cyclic voltammetry induced a layer-by-layer nanostructural growth at the surface of the SAMs, and this is presumably due to the electrochemical formation of disulfide bonds, where the thiol moieties play a double role of both an anchoring group and an electroactive coupling agent. The conditions of the deposition are studied in detail. Modified electrodes containing both 1 and 2 alternatively can be easily prepared following this new approach. The film proved to be stable, displaying a similar current/voltage response for more than 10 repeating cycles in oxidation up to 0.97 V vs Ag/AgNO(3) (10(-2) M).

Factors influencing mononuclear versus multinuclear coordination in a series of potentially hexadentate acyclic N6 ligands: the roles of flexibility and chelate ring size.

The synthesis of the new potentially hexadentate ligands N,N'-bis(2,2'-bipyridin-6-ylmethyl)butane-1,4-diamine (bmbu), N,N'-bis(2,2'-bipyridin-6-ylmethyl)pentane-1,5-diamine (bmpt) and N,N'-bis(2,2'-bipyridin-6-ylmethyl)octane-1,8-diamine (bmot) from the condensation of 2,2'-bipyridine-6-carbaldehyde with the appropriate diamine (butane-1,4-diamine, pentane-1,5-diamine and octane-1,8-diamine, respectively) and subsequent reduction, is reported. Bmet, bmpp and bmbu all form mononuclear complexes with first-row transition metal ions (Co(3+), Fe(2+), Ni(2+), Mn(2+)), and X-ray structures of [Mn(bmet)](ClO(4))(2), [Ni(bmet)](ClO(4))(2), [Fe(bmet)](ClO(4))(2), [Mn(bmpp)](ClO(4))(2)·2MeCN and [Co(bmpp)](ClO(4))(3)·H(2)O are reported. As the aliphatic methylene chain increases in length, formation of dinuclear, and in some cases trinuclear, complexes becomes more pronounced, as evidenced by mass spectral analysis of solutions containing Ni(2+) and bmpt, and Ni(2+), Fe(2+) and Mn(2+) with bmot. The increasing preference for multinuclear complexes with increasing chain length is ascribed to the difficulty of incorporating a medium-sized (8 to 13-membered) chelate ring in a mononuclear complex.

[Mn(bipyridyl)(CO)3Br]: an abundant metal carbonyl complex as efficient electrocatalyst for CO2 reduction.

Manganese at work: carbonyl bipyridyl complexes based on manganese, a non-noble abundant and inexpensive metal, have been proved to be excellent molecular catalysts for the selective electrochemical reduction of CO(2) to CO under mild conditions. Another advantage of manganese complexes over rhenium complexes is that these catalysts operate at markedly less overpotential (0.40 V gain).