RESUMEN
CONTEXT: We had available records on over 300 workers evaluated with the beryllium bronchoalveolar lavage lymphocyte proliferation test (BeBALLPT) at three expert chronic beryllium disease (CBD) diagnostic centers. OBJECTIVE: The objective was to describe the contribution of the BeBALLPT to classification of workers with respect to beryllium sensitization (BeS) and beryllium-induced lung inflammation. METHODS: Company records were used to identify beryllium workers who had undergone diagnostic bronchoscopy with BeBALLPT. Clinical, work and smoking information was abstracted from electronic and paper databases. We analyzed factors influencing BeBALLPT outcome, and its relation to blood-determined BeS and granulomatous inflammation. RESULTS: Positive BeBALLPTs contributed evidence of BeS in subjects without prior positive beryllium blood lymphocyte proliferation tests (BeBLPTs) and of pulmonary inflammation in persons without granulomata evident on lung biopsy. Positive BeBALLPTs were associated with positive BeBLPTs and more strongly with granulomata. The rate of both positive BeBALLPT and granulomata increased with time worked through 4 years and were lower in smoking subjects. The false negative rate of the BeBALLPT was 20%. CONCLUSION: A positive BeBALLPT is closely linked to the presence of granulomata on lung biopsy and can be considered as an indicator of lung inflammation in addition to BeS. The ability to use BeBALLPT as a substitute for the more risky lung biopsy is limited by the BeBALLPT false negative rate and lack of information on the false positive rate. It is not recommended that a positive BeBALLPT be considered sufficient evidence for both lung inflammation and BeS.
Asunto(s)
Berilio/toxicidad , Líquido del Lavado Bronquioalveolar/citología , Granuloma del Sistema Respiratorio/diagnóstico , Inflamación/diagnóstico , Hipersensibilidad Respiratoria/diagnóstico , Adulto , Anciano , Aleaciones , Broncoscopía , Proliferación Celular/efectos de los fármacos , Cobre , Femenino , Granuloma del Sistema Respiratorio/patología , Humanos , Inflamación/patología , Linfocitos/efectos de los fármacos , Masculino , Persona de Mediana Edad , Níquel , Exposición Profesional/efectos adversos , Valor Predictivo de las Pruebas , Hipersensibilidad Respiratoria/patología , Adulto JovenAsunto(s)
Pruebas Genéticas , Salud Laboral , Humanos , Tamizaje Masivo , Estados Unidos , Lugar de TrabajoRESUMEN
PURPOSE: This study explores how highly correlated time variables (occupational cohort time scales) contribute to confounding and ambiguity of interpretation. METHODS: Occupational cohort time scales were identified and organized through simple equations of three time scales (relational triads) and the connections between these triads (time scale web). The behavior of the time scales was examined when constraints were imposed on variable ranges and interrelationships. RESULTS: Constraints on a time scale in a triad create high correlations between the other two time scales. These correlations combine with the connections between relational triads to produce association paths. High correlation between time scales leads to ambiguity of interpretation. CONCLUSIONS: Understanding the properties of occupational cohort time scales, their relational triads, and the time scale web is helpful in understanding the origins of otherwise obscure confounding bias and ambiguity of interpretation.
Asunto(s)
Estudios de Cohortes , Factores de Confusión Epidemiológicos , Enfermedades Profesionales/epidemiología , Salud Laboral , Factores de Edad , Berilio/efectos adversos , Modificador del Efecto Epidemiológico , Humanos , Neoplasias Pulmonares/inducido químicamente , Neoplasias Pulmonares/mortalidad , Exposición ProfesionalRESUMEN
OBJECTIVE: To describe how smoking correction factors based on comparing worker smoking prevalence with population smoking prevalence are biased if applied to an occupational incidence cohort. METHODS: Relative rates of smoking for shorter-tenure workers derived from occupational cohort lung cancer studies were applied to incidence and prevalence population tenure distributions to calculate relative smoking estimates. RESULTS: High smoking rates in short-tenure workers have little effect on prevalent worker rates (relative smoking estimates, 1.04 and 1.02) and much larger effect in occupational incidence populations (relative smoking estimates, 1.58 and 1.21), which have a much higher proportion of short tenure-workers. CONCLUSIONS: Smoking correction estimates derived from surveys of smoking habits in prevalent workers may introduce bias when applied to incidence workers because of very different proportions of short-tenure workers (length-time biased sampling).
Asunto(s)
Empleo/estadística & datos numéricos , Neoplasias Pulmonares/mortalidad , Enfermedades Profesionales/mortalidad , Fumar/epidemiología , Sesgo , Estudios de Cohortes , Humanos , Incidencia , Prevalencia , Estadística como Asunto , Factores de TiempoRESUMEN
Inhalation of beryllium is associated with the development of sensitization; however, dermal exposure may also be important. The primary aim of this study was to elucidate relationships among exposure pathways in four different manufacturing and finishing facilities. Secondary aims were to identify jobs with increased levels of beryllium in air, on skin, and on surfaces; identify potential discrepancies in exposure pathways, and determine if these are related to jobs with previously identified risk. Beryllium was measured in air, on cotton gloves, and on work surfaces. Summary statistics were calculated and correlations among all three measurement types were examined at the facility and job level. Exposure ranking strategies were used to identify jobs with higher exposures. The highest air, glove, and surface measurements were observed in beryllium metal production and beryllium oxide ceramics manufacturing jobs that involved hot processes and handling powders. Two finishing and distribution facilities that handle solid alloy products had lower exposures than the primary production facilities, and there were differences observed among jobs. For all facilities combined, strong correlations were found between air-surface (rp ≥ 0.77), glove-surface (rp ≥ 0.76), and air-glove measurements (rp ≥ 0.69). In jobs where higher risk of beryllium sensitization or disease has been reported, exposure levels for all three measurement types were higher than in jobs with lower risk, though they were not the highest. Some jobs with low air concentrations had higher levels of beryllium on glove and surface wipe samples, suggesting a need to further evaluate the causes of the discrepant levels. Although such correlations provide insight on where beryllium is located throughout the workplace, they cannot identify the direction of the pathways between air, surface, or skin. Ranking strategies helped to identify jobs with the highest combined air, glove, and/or surface exposures. All previously identified high-risk jobs had high air concentrations, dermal mass loading, or both, and none had low dermal and air. We have found that both pathways are relevant. [Supplementary materials are available for this article. Go to the publisher's online edition of Journal of Occupational and Environmental Hygiene for the following free supplemental resource: a file describing the forms of beryllium materials encountered during production and characteristics of the aerosols by process areas.].
Asunto(s)
Contaminantes Ocupacionales del Aire/análisis , Berilio/análisis , Metalurgia , Exposición Profesional/análisis , Aerosoles , Polvo/análisis , Monitoreo del Ambiente/métodos , Guantes Protectores , Humanos , PielRESUMEN
OBJECTIVE: Common variation is a statistical process-control term for variability associated with usual operating conditions. Special variation occurs when usual operating conditions are disrupted. The objective was to explore the implications for preventive occupational medicine practice of common and special variation in air-level exposure. METHODS: Illustrations are derived from US and UK beryllium facility databases. RESULTS: Special variation may be missed in finite sampling sets, giving a very inaccurate indication of the highest air levels experienced on the job. Depending on the toxicologic model, failure to assess special variation influences the meaningfulness of aspects of occupational prevention, from medical surveillance through risk management. CONCLUSIONS: Jobs and tasks should be characterized for special variation in addition to traditional air sampling. Both special variation and common variation should be considered in occupational medicine preventive practice.
Asunto(s)
Contaminantes Ocupacionales del Aire/análisis , Berilio/análisis , Monitoreo del Ambiente/métodos , Industrias , Exposición Profesional/análisis , Beriliosis/prevención & control , Bases de Datos Factuales , Humanos , Modelos Estadísticos , Exposición Profesional/estadística & datos numéricos , Salud Laboral , Vigilancia de la Población , Reproducibilidad de los Resultados , Medición de Riesgo , Gestión de Riesgos , Reino Unido , Estados UnidosRESUMEN
BACKGROUND: In 2000, a manufacturer of beryllium materials and products introduced a comprehensive program to prevent beryllium sensitization and chronic beryllium disease (CBD). We assessed the program's efficacy in preventing sensitization 9 years after implementation. METHODS: Current and former workers hired since program implementation completed questionnaires and provided blood samples for the beryllium lymphocyte proliferation test (BeLPT). Using these data, as well as company medical surveillance data, we estimated beryllium sensitization prevalence. RESULTS: Cross-sectional prevalence of sensitization was 0.7% (2/298). Combining survey results with surveillance results, a total of seven were identified as sensitized (2.3%). Early Program workers were more likely to be sensitized than Late Program workers; one of the latter was newly identified. All sensitization was identified while participants were employed. One worker was diagnosed with CBD during employment. CONCLUSIONS: The combination of increased respiratory and dermal protection, enclosure and improved ventilation of high-risk processes, dust migration control, improved housekeeping, and worker and management education showed utility in reducing sensitization in the program's first 9 years. The low rate (0.6%, 1/175) among Late Program workers suggests that continuing refinements have provided additional protection against sensitization compared to the program's early years.
Asunto(s)
Beriliosis/prevención & control , Inmunización , Exposición Profesional/efectos adversos , Salud Laboral , Prevención Primaria/organización & administración , Adulto , Beriliosis/epidemiología , Beriliosis/inmunología , Berilio/sangre , Enfermedad Crónica , Estudios Transversales , Femenino , Humanos , Exposición por Inhalación , Masculino , Persona de Mediana Edad , Pronóstico , Desarrollo de Programa , Evaluación de Programas y Proyectos de Salud , Ropa de Protección , Medición de Riesgo , Encuestas y Cuestionarios , Factores de TiempoRESUMEN
OBJECTIVES: Exposure-response relations for beryllium sensitization (BeS) and chronic beryllium disease (CBD) using aerosol mass concentration have been inconsistent, although process-related risks found in most studies suggest that exposure-dependent risks exist. We examined exposure-response relations using personal exposure estimates in a beryllium worker cohort with limited work tenure to minimize exposure misclassification. METHODS: The population comprised workers employed in 1999 with six years or less tenure. Each completed a work history questionnaire and was evaluated for immunological sensitization and CBD. A job-exposure matrix was combined with work histories to create individual estimates of average, cumulative, and highest-job-worked exposure for total, respirable, and submicron beryllium mass concentrations. We obtained odds ratios from logistic regression models for exposure-response relations, and evaluated process-related risks. RESULTS: Participation was 90.7% (264/291 eligible). Sensitization prevalence was 9.8% (26/264), with 6 sensitized also diagnosed with CBD (2.3%, 6/264). A general pattern of increasing sensitization prevalence was observed as exposure quartile increased. Both total and respirable beryllium mass concentration estimates were positively associated with sensitization (average and highest job), and CBD (cumulative). Increased sensitization prevalence was identified in metal/oxide production, alloy melting and casting, and maintenance, and for CBD in melting and casting. Lower sensitization prevalence was observed in plant-area administrative work. CONCLUSIONS: Sensitization was associated with average and highest job exposures, and CBD was associated with cumulative exposure. Both total and respirable mass concentrations were relevant predictors of risk. New process-related risks were identified in melting and casting and maintenance.
Asunto(s)
Beriliosis/etiología , Berilio/toxicidad , Industrias , Exposición por Inhalación/efectos adversos , Exposición Profesional/efectos adversos , Medición de Riesgo/métodos , Adulto , Contaminación del Aire Interior/efectos adversos , Beriliosis/epidemiología , Enfermedad Crónica , Intervalos de Confianza , Femenino , Humanos , Masculino , Persona de Mediana Edad , Salud Laboral , Oportunidad Relativa , Estadística como Asunto , Factores de Tiempo , Estados Unidos/epidemiología , Lugar de Trabajo , Adulto JovenRESUMEN
OBJECTIVE: Beryllium mine and ore extraction mill workers have low rates of beryllium sensitization and chronic beryllium disease relative to the level of beryllium exposure. The objective was to relate these rates to the solubility and composition of the mine and mill materials. METHOD: Medical surveillance and exposure data were summarized. Dissolution of BeO, ore materials and beryllium hydroxide, Be(OH)(2) was measured in synthetic lung fluid. RESULT: The ore materials were more soluble than BeO at pH 7.2 and similar at pH 4.5. Be(OH)(2) was more soluble than BeO at both pH. Aluminum dissolved along with beryllium from ore materials. CONCLUSION: Higher solubility of beryllium ore materials and Be(OH)(2) at pH 7.2 might shorten particle longevity in the lung. The aluminum content of the ore materials might inhibit the cellular immune response to beryllium.
Asunto(s)
Contaminantes Ocupacionales del Aire/química , Beriliosis/etiología , Berilio/química , Hipersensibilidad/etiología , Minería , Enfermedades Profesionales/etiología , Exposición Profesional/efectos adversos , Solubilidad , Contaminantes Ocupacionales del Aire/efectos adversos , Contaminantes Ocupacionales del Aire/inmunología , Silicatos de Aluminio/efectos adversos , Silicatos de Aluminio/química , Silicatos de Aluminio/inmunología , Berilio/efectos adversos , Berilio/inmunología , Proliferación Celular , Células Cultivadas , Humanos , Linfocitos/efectos de los fármacos , Factores de RiesgoRESUMEN
OBJECTIVE: We evaluated a workplace preventive program's effectiveness, which emphasized skin and respiratory protection, workplace cleanliness, and beryllium migration control in lowering beryllium sensitization. METHODS: We compared sensitization prevalence and incidence rates for workers hired before and after the program using available cross sectional and longitudinal surveillance data. RESULTS: Sensitization prevalence was 8.9% for the Pre-Program Group and 2.1% for the Program Group. The sensitization incidence rate was 3.7/1000 person-months for the Pre-Program Group and 1.7/1000 person-months for the Program Group. After making adjustments for potential selection and information bias, sensitization prevalence for the Pre-Program Group was 3.8 times higher (95% CI = 1.5 to 9.3) than the Program Group. The sensitization incidence rate ratio comparing the Pre-Program Group to the Program Group was 1.6 (95% CI = 0.8 to 3.6). CONCLUSIONS: This preventive program reduced the prevalence of but did not eliminate beryllium sensitization.
Asunto(s)
Aleaciones , Berilio/efectos adversos , Industrias , Exposición Profesional/prevención & control , Óxidos , Estudios Transversales , Femenino , Humanos , MasculinoRESUMEN
BACKGROUND: Up to 12% of beryllium-exposed American workers would test positive on beryllium lymphocyte proliferation test (BeLPT) screening, but the implications of sensitization remain uncertain. METHODS: Seventy two current and former employees of a beryllium manufacturer, including 22 with pathologic changes of chronic beryllium disease (CBD), and 50 without, with a confirmed positive test were followed-up for 7.4 +/-3.1 years. RESULTS: Beyond predicted effects of aging, flow rates and lung volumes changed little from baseline, while DLCO dropped 17.4% of predicted on average. Despite this group decline, only 8 subjects (11.1%) demonstrated physiologic or radiologic abnormalities typical of CBD. Other than baseline status, no clinical or laboratory feature distinguished those who clinically manifested CBD at follow-up from those who did not. CONCLUSIONS: The clinical outlook remains favorable for beryllium-sensitized individuals over the first 5-12 years. However, declines in DLCO may presage further and more serious clinical manifestations in the future. These conclusions are tempered by the possibility of selection bias and other study limitations.
Asunto(s)
Contaminantes Ocupacionales del Aire/efectos adversos , Beriliosis/epidemiología , Berilio/inmunología , Hipersensibilidad/epidemiología , Exposición Profesional/efectos adversos , Adulto , Beriliosis/diagnóstico , Berilio/efectos adversos , Enfermedad Crónica , Femenino , Estudios de Seguimiento , Humanos , Hipersensibilidad/diagnóstico , Hipersensibilidad/etiología , Industrias , Activación de Linfocitos/efectos de los fármacos , Masculino , Persona de Mediana Edad , Pruebas de Función Respiratoria , Factores de Riesgo , Estados Unidos/epidemiologíaRESUMEN
OBJECTIVES: In 2000, 7% of workers at a copper-beryllium facility were beryllium sensitized. Risk was associated with work near a wire annealing/pickling process. The facility then implemented a preventive program including particle migration control, respiratory and dermal protection, and process enclosure. We assessed the program's efficacy in preventing beryllium sensitization. METHODS: In 2000, the facility began testing new hires (program workers) with beryllium lymphocyte proliferation tests (BeLPTs) at hire and at intervals during employment. We compared sensitization incidence rates (IRs) and prevalence rates for workers hired before the program (legacy workers) with rates for program workers, including program worker subgroups. We also examined trends in BeLPTs from a single laboratory. RESULTS: In all, five of 43 legacy workers (IR = 3.8/1,000 person-months) and three of 82 program workers (IR = 1.9/1,000 person-months) were beryllium sensitized, for an incidence rate ratio (IRR) of 2.0 (95% confidence interval [CI] 0.5, 10.1). Two of 37 pre-enclosure program workers (IR = 2.4/1,000 person-months) and one of 45 post-enclosure program workers (IR = 1.4/1,000 person-months) were beryllium sensitized, for IRRs of 1.6 (95% CI 0.3, 11.9) and 2.8 (95% CI 0.4, 66.2), respectively, compared with legacy workers. Test for trend in prevalence rates was significant. Among 2,159 first-draw BeLPTs during 95 months, we identified seven months when high numbers of redraws were required, with one possible misclassification in this facility. CONCLUSIONS: Fewer workers became sensitized after implementation of the preventive program. However, low statistical power due to the facility's small workforce prevents a definitive conclusion about the program's efficacy. These findings have implications for other copper-beryllium facilities, where program components may merit application.
Asunto(s)
Contaminantes Ocupacionales del Aire/envenenamiento , Beriliosis/prevención & control , Berilio/química , Industria Química/normas , Exposición Profesional/prevención & control , Administración de la Seguridad/métodos , Adulto , Beriliosis/etiología , Berilio/sangre , Cobre/química , Polvo , Seguridad de Equipos , Femenino , Humanos , Masculino , Persona de Mediana Edad , Monitoreo Fisiológico/métodos , Evaluación de Programas y Proyectos de Salud , Ropa de Protección , Equipos de Seguridad , Factores de RiesgoRESUMEN
OBJECTIVE: The objective was to assess highly confounded patterns in a standardized mortality ratio (SMR) analysis of lung cancer in beryllium worker cohorts. METHODS: We used Cox proportional hazards single- and multi-variate models to assess confounding and the SMR patterns. RESULTS: We confirmed the lack of association of lung cancer with time worked. We could not confirm the original study's finding of lung cancer highly associated with earlier plants and or with workers hired in the 1940s compared to the 1950s. The pattern of higher rates of lung cancer with increasing latency was attenuated when covariates were added to the model. We could not exclude that the lower SMR and hazard ratios for workers hired in the 1960s might be related to assumed lower beryllium exposures. CONCLUSION: The patterns observed provide little support for an association of lung cancer with beryllium work factors. This result is likely due to the absence in the original study of a significant overall excess of lung cancer after smoking adjustment.
Asunto(s)
Berilio/toxicidad , Neoplasias Pulmonares/inducido químicamente , Exposición Profesional/efectos adversos , Carcinoma Pulmonar de Células Pequeñas/inducido químicamente , Adulto , Estudios de Cohortes , Humanos , Neoplasias Pulmonares/mortalidad , Persona de Mediana Edad , Exposición Profesional/estadística & datos numéricos , Ohio/epidemiología , Modelos de Riesgos Proporcionales , Estudios Retrospectivos , Carcinoma Pulmonar de Células Pequeñas/mortalidad , Análisis de Supervivencia , Estados Unidos/epidemiología , Adulto JovenRESUMEN
OBJECTIVE: We followed a cohort of 136 beryllium oxide ceramics workers from 1992 to 2003, including those who left employment, for beryllium sensitization and chronic beryllium disease (CBD). METHODS: We invited the cohort's participation in current worker surveys in 1992, 1998, 2000, and 2002-2003, and in former worker surveys in 2000-2001 and 2003. We calculated 11-year cumulative incidences (after 1992 initial survey) of sensitization and CBD, both crude and corrected for interval censoring; and period prevalences (including 1992 findings), crude and corrected. RESULTS: In 1992, point prevalences were 6% sensitized and 4% CBD. We obtained follow-up on 83% of 128 not sensitized in 1992. Crude cumulative incidences for sensitization and CBD were 13% and 9%, respectively; corrected were 15% and 11%. Crude period prevalences for sensitization and CBD were 16% and 11%, respectively; corrected were 20% and 14%. Corrected period prevalences for pre-1992 machining work were 30% and 20%. CONCLUSIONS: With repeated testing over 11 years, total sensitization and CBD in this cohort were triple initial 1992 survey results.
Asunto(s)
Beriliosis/epidemiología , Berilio/efectos adversos , Hipersensibilidad/epidemiología , Exposición Profesional/efectos adversos , Adulto , Anciano , Beriliosis/sangre , Berilio/sangre , Broncoscopios , Cerámica , Industria Química , Enfermedad Crónica , Estudios de Cohortes , Femenino , Humanos , Hipersensibilidad/etiología , Incidencia , Linfocitos , Masculino , Persona de Mediana Edad , Modelos de Riesgos Proporcionales , Fumar/epidemiología , Encuestas y CuestionariosRESUMEN
OBJECTIVE: To test whether a frequently used cohort-nested case-control study design exaggerated exposure-response relationships because of unrecognized study design bias. Our aim was to evaluate empirically the performance of this complex study design. METHODS: We applied the design from one such study to a closely related cohort using randomly selected probands as cases. Values for average exposures were assigned to probands equal to, greater than, and less than those assigned to controls (matches). RESULTS: Under certain lag scenarios, the nested study design produced higher average exposure in probands compared with their matches, even when this was clearly not the case. CONCLUSIONS: Empirical evaluation demonstrated that the study design produced a biased case-control lagged exposure difference under the null hypothesis and could not distinguish qualitatively between null and alternate hypotheses. Empirical evaluation provided a useful check on results generated from a complex study design. It gave useful insight into the behavior of the index study design that was not otherwise readily deducible.
Asunto(s)
Berilio/toxicidad , Diseño de Investigaciones Epidemiológicas , Neoplasias Pulmonares/mortalidad , Exposición Profesional/análisis , Adulto , Factores de Edad , Sesgo , Estudios de Casos y Controles , Estudios de Cohortes , Investigación Empírica , Humanos , Neoplasias Pulmonares/inducido químicamente , Persona de Mediana Edad , Exposición Profesional/estadística & datos numéricos , Distribución Aleatoria , Muestreo , Estadística como Asunto , Factores de TiempoRESUMEN
OBJECTIVE: Our aim was to reanalyze a nested case-control study of beryllium and lung cancer because we identified analysis and study design issues that could have led to the elevated odds ratios obtained in the study. METHODS: We reanalyzed the data using nontransformed exposure metrics instead of log-transformed metrics used in the publication. We identified and examined effects on estimated odds ratios of imbalances between cases and controls caused by the control selection method. RESULTS: This reanalysis found no elevated odds ratios for any exposure variable. CONCLUSION: : Our conclusions differ from the authors' interpretation that the findings are due to a causal relationship between beryllium exposure and lung cancer. Our alternative explanation is that they may be due to methodological problems that could have been controlled by closer matching of controls to cases. CLINICAL SIGNIFICANCE: This study challenges conclusions made from a large case-control study concerning beryllium-lung cancer associations. Occupational medicine practitioners may want to integrate findings from this study into advice they give beryllium-exposed workers concerned about lung cancer.
Asunto(s)
Berilio/efectos adversos , Neoplasias Pulmonares/inducido químicamente , Enfermedades Profesionales/inducido químicamente , Estudios de Casos y Controles , Humanos , Modelos Logísticos , Neoplasias Pulmonares/mortalidad , National Institute for Occupational Safety and Health, U.S. , Enfermedades Profesionales/mortalidad , Exposición Profesional , Oportunidad Relativa , Estados Unidos/epidemiologíaRESUMEN
BACKGROUND: A 1998 survey at a beryllium oxide ceramics manufacturing facility found that 10% of workers hired in the previous 6 years had beryllium sensitisation as determined by the beryllium lymphocyte proliferation test (BeLPT). In response, the facility implemented an enhanced preventive programme to reduce sensitisation, including increased respiratory and dermal protection and particle migration control. AIM: To assess the programme's effectiveness in preventing sensitisation. METHODS: In 2000, the facility began testing newly hired workers for beryllium sensitisation with the BeLPT at time of hire and during employment. The sensitisation rate and prevalence for workers hired from 2000 to 2004 were compared with that for workers hired from 1993 to 1998, who were tested in the 1998 survey. Facility environmental conditions for both time periods were evaluated. RESULTS: Newly hired workers in both cohorts worked for a mean of 16 months. Of the 97 workers hired from 2000 to 2004 with at least one employment BeLPT result, four had abnormal results at time of hire and one became sensitised during employment. Of the 69 workers hired from 1993 to 1998 and tested in 1998, six were found to be sensitised. The sensitisation rate for the 2000-4 workers was 0.7-2.7/1000 person-months of employment, and that for the 1993-8 workers was 5.6/1000 person-months, at least 2.1 (95% confidence interval (CI) 0.6 to 8.4) and up to 8.2 (95% CI 1.2 to 188.8) times higher than that for the 2000-4 workers. The sensitisation prevalence for the 2000-4 workers was 1% and that for the 1993-8 workers was 8.7%, 8.4 (95% CI 1.04 to 68.49) times higher than that for the 2000-4 workers. Airborne beryllium levels for production workers for the two time periods were similar. CONCLUSIONS: A comprehensive preventive programme reduced beryllium sensitisation in new workers during the first years of employment, despite airborne beryllium levels for production workers that were similar to pre-programme levels.
Asunto(s)
Beriliosis/prevención & control , Berilio/análisis , Cerámica , Exposición Profesional/prevención & control , Adolescente , Adulto , Anciano , Contaminantes Ocupacionales del Aire/análisis , Beriliosis/etiología , Proliferación Celular , Monitoreo del Ambiente/métodos , Humanos , Activación de Linfocitos , Persona de Mediana Edad , Exposición Profesional/efectos adversos , Salud Laboral , Evaluación de Programas y Proyectos de Salud , Piel/químicaRESUMEN
Controlling beryllium inhalation exposures to comply with regulatory levels (2 micro g m(-3) of air) does not appear to prevent beryllium sensitization and chronic beryllium disease (CBD). Additionally, it has proven difficult to establish a clear inhalation exposure-response relationship for beryllium sensitization and CBD. Thus, skin may be an important route of exposure that leads to beryllium sensitization. A 2000 survey had identified prevalence of sensitization (7%) and CBD (4%) in a beryllium alloy facility. An improved particulate migration control program, including dermal protection in production areas, was completed in 2002 at the facility. The purpose of this study was to evaluate levels of beryllium in workplace air, on work surfaces, on cotton gloves worn by employees over nitrile gloves, and on necks and faces of employees subsequent to implementation of the program. Over a 6 day period, we collected general area air samples (n = 10), wipes from routinely handled work surfaces (n = 252), thin cotton glove samples (n = 113) worn by employees, and neck wipes (n = 109) and face wipes (n = 109) from the same employees. In production, production support and office areas geometric mean (GM) levels of beryllium were 0.95, 0.59 and 0.05 micro g per 100 cm(2) on work surfaces; 42.8, 73.8 and 0.07 micro g per sample on cotton gloves; 0.07, 0.09 and 0.003 micro g on necks; and 0.07, 0.12 and 0.003 micro g on faces, respectively. Correlations were strong between beryllium in air and on work surfaces (r = 0.79), and between beryllium on cotton gloves and on work surfaces (0.86), necks (0.87) and faces (0.86). This study demonstrates that, even with the implementation of control measures to reduce skin contact with beryllium as part of a comprehensive workplace protection program, measurable levels of beryllium continue to reach the skin of workers in production and production support areas. Based on our current understanding of the multiple exposure pathways that may lead to sensitization, we support prudent control practices such as use of protective gloves to minimize skin exposure to beryllium salts and fine particles.
Asunto(s)
Contaminantes Ocupacionales del Aire/análisis , Berilio , Cobre , Monitoreo del Ambiente/métodos , Metalurgia , Exposición Profesional , Aleaciones , Beriliosis/etiología , Polvo , Guantes Protectores , Humanos , Absorción CutáneaRESUMEN
Despite more than 20 years of surveillance and epidemiologic studies using the beryllium blood lymphocyte proliferation test (BeBLPT) as a measure of beryllium sensitization (BeS) and as an aid for diagnosing subclinical chronic beryllium disease (CBD), improvements in specific understanding of the inhalation toxicology of CBD have been limited. Although epidemiologic data suggest that BeS and CBD risks vary by process/work activity, it has proven difficult to reach specific conclusions regarding the dose-response relationship between workplace beryllium exposure and BeS or subclinical CBD. One possible reason for this uncertainty could be misclassification of BeS resulting from variation in BeBLPT testing performance. The reliability of the BeBLPT, a biological assay that measures beryllium sensitization, is unknown. To assess the performance of four laboratories that conducted this test, we used data from a medical surveillance program that offered testing for beryllium sensitization with the BeBLPT. The study population was workers exposed to beryllium at various facilities over a 10-year period (1992-2001). Workers with abnormal results were offered diagnostic workups for CBD. Our analyses used a standard statistical technique, statistical process control (SPC), to evaluate test reliability. The study design involved a repeated measures analysis of BeBLPT results generated from the company-wide, longitudinal testing. Analytical methods included use of (1) statistical process control charts that examined temporal patterns of variation for the stimulation index, a measure of cell reactivity to beryllium; (2) correlation analysis that compared prior perceptions of BeBLPT instability to the statistical measures of test variation; and (3) assessment of the variation in the proportion of missing test results and how time periods with more missing data influenced SPC findings. During the period of this study, all laboratories displayed variation in test results that were beyond what would be expected due to chance alone. Patterns of test results suggested that variations were systematic. We conclude that laboratories performing the BeBLPT or other similar biological assays of immunological response could benefit from a statistical approach such as SPC to improve quality management.