RESUMEN
Lung surfactant is a complex mixture of lipid and protein, responsible for alveolar stability, becomes dysfunctional due to alteration of its structure and function by leaked serum materials in disease. Serum proteins, cholesterol and low density lipoprotein (LDL) were studied with bovine lipid extract surfactant (BLES) using Langmuir films, and bilayer dispersions using Raman spectroscopy. While small amount of cholesterol (10 wt%) and LDL did not significantly affect the adsorption and surface tension lowering properties of BLES. However serum lipids, whole serum as well as higher amounts of cholesterol, and LDL dramatically altered the surface properties of BLES films, as well as gel-fluid structures formed in such films observed using atomic force microscopy (AFM). Raman-spectroscopic studies revealed that serum proteins, LDL and excess cholesterol had fluidizing effects on BLES bilayers dispersion, monitored from the changes in hydrocarbon vibrational modes during gel-fluid thermal phase transitions. This study clearly suggests that patho-physiological amounts of serum lipids (and not proteins) significantly alter the molecular arrangement of surfactant in films and bilayers, and can be used to model lung disease.
Asunto(s)
Surfactantes Pulmonares/química , Adsorción , Proteínas Sanguíneas/análisis , Colesterol/análisis , Membrana Dobles de Lípidos/análisis , Lipoproteínas LDL/análisis , Fluidez de la Membrana , Microscopía de Fuerza Atómica , Estructura Molecular , Transición de Fase , Espectrometría Raman , Propiedades de SuperficieRESUMEN
The performance of self-emulsifying drug delivery systems (SEDDS) is influenced by their tendency to generate supersaturated systems during dispersion and digestion in the gastrointestinal tract. This study investigated the effect of drug loading on supersaturation during digestion of fenofibrate or danazol SEDDS, each formulated using long-chain lipids and a range of nonionic surfactants. Supersaturation was described by the maximum supersaturation ratio (SR(M) ) produced by in vitro digestion. This parameter was calculated as the ratio of the total concentration of drug present in the digestion vessel versus the drug solubility in the colloidal phases formed by digestion of the SEDDS. SR(M) proved to be a remarkable indicator of performance across a range of lipid-based formulations. SEDDS containing danazol showed little evidence of precipitation on digestion, even at drug loads approaching saturation in the formulation. In contrast, fenofibrate crystallized extensively on digestion of the corresponding series of SEDDS, depending on the drug loading. The difference was explained by the generation of higher SR(M) values by fenofibrate formulations. A threshold SR(M) of 2.5-2.6 was identified in six of the seven SEDDS. This is not a definitive threshold for precipitation, but in general when SR(M) is greater than 3, fenofibrate supersaturation could not be maintained.
Asunto(s)
Danazol/administración & dosificación , Portadores de Fármacos/química , Emulsiones/química , Antagonistas de Estrógenos/administración & dosificación , Fenofibrato/administración & dosificación , Hipolipemiantes/administración & dosificación , Tensoactivos/química , Precipitación Química , Coloides/química , Sistemas de Liberación de Medicamentos , Lípidos/química , SolubilidadRESUMEN
The solubilizing properties of lipid-based formulations (LBFs) can change dramatically following dispersion and digestion of the formulation components. This study investigated the performance of self-emulsifying LBFs consisting of four different long-chain (LC)/medium-chain (MC) lipid blends formulated with the lipophilic drug fenofibrate and either a water-insoluble surfactant polysorbate 85 (Tween 85) or its more hydrophilic relative, polysorbate 80 (Tween 80). These components allowed closely related Type II and IIIA LBFs of fenofibrate to be evaluated during in vitro dispersion and in vitro digestion testing. Initial assessment of the solvent capacity of drug-free LBFs during dispersion and digestion revealed that the solubility of fenofibrate was more dependent on the surfactant type rather than lipid composition. Type II LBFs in the dispersed state were generally better at solubilizing fenofibrate than equivalent Type IIIA LBFs, regardless of lipid composition. However, even when high drug loadings were used, supersaturation/drug precipitation after dispersion of Type II or Type IIIA LBFs was only moderate. In contrast, digestion of both Type II and IIIA LBFs led to much higher levels of drug supersaturation, and this resulted in drug precipitation. After digestion the ability of each LBF to maintain drug in a solubilized state was highly dependent on lipid composition as well as the choice of surfactant. Notably, MC lipids exhibited very good solubilizing properties in the dispersed state, but resulted in a higher degree of supersaturation on digestion, leading to higher susceptibility to drug precipitation. This study showed that replacing LC lipids with MC lipids in Type II and IIIA LBF, in the proportions used here has little effect on fenofibrate solubilization during dispersion, but is likely to promote supersaturation on digestion. Without careful consideration of drug loading and choice of surfactant in Type II/IIIA MC lipid formulations, there is a high risk of precipitation of drug in the intestine.
Asunto(s)
Fenofibrato/química , Lípidos/química , Polisorbatos/química , Tensoactivos/química , Mucosa Intestinal/metabolismo , SolubilidadRESUMEN
In vitro digestion testing is of practical importance to predict the fate of drugs administered in lipid-based delivery systems. Calcium ions are often added to digestion media to increase the extent of digestion of long-chain triglycerides (LCTs), but the effects they have on phase behaviour of the products of digestion, and consequent drug solubilization, are not well understood. This study investigates the effect of calcium and bile salt concentrations on the rate and extent of in vitro digestion of soybean oil, as well as the solubilizing capacity of the digestion products for two poorly water-soluble drugs, fenofibrate and danazol. In the presence of higher concentrations of calcium ions, the solubilization capacities of the digests were reduced for both drugs. This effect is attributed to the formation of insoluble calcium soaps, visible as precipitates during the digestions. This reduces the availability of liberated fatty acids to form mixed micelles and vesicles, thereby reducing drug solubilization. The use of high calcium concentrations does indeed force in vitro digestion of LCTs but may overestimate the extent of drug precipitation that occurs within the intestinal lumen.
Asunto(s)
Danazol/química , Sistemas de Liberación de Medicamentos , Fenofibrato/química , Lípidos/química , Ácidos y Sales Biliares/química , Calcio/química , Precipitación Química , Coloides , Digestión , Ácidos Grasos/química , Solubilidad , Aceite de Soja/metabolismo , Triglicéridos/químicaRESUMEN
Functionality, structure and composition of the adsorbed films of bovine lipid extract surfactant (BLES), in the absence and presence of bovine serum albumin (BSA), at the air-buffer interface was characterized through surface tension, atomic force microscopy and time of flight secondary ion mass spectrometric methods. Gel and fluid domains of BLES films were found to be altered significantly in the presence of BSA. Differential scanning calorimetric studies on BLES dispersions in presence of BSA revealed that the perturbations of the lipid bilayer structures were significant only at higher amount of BSA. FTIR studies on the BLES dispersions in buffer solution revealed that BSA could affect the lipid head-group hydrations in bilayer as well as the methylene and methyl vibration modes of fatty acyl chains of the phospholipids present in BLES. Serum albumin could perturb the film structure at pathophysiological concentration while higher amount of BSA was required in perturbing the bilayer structures. The studies suggest a connected perturbed bilayer to monolayer transition model for surfactant inactivation at the alveolar-air interface in dysfunctional surfactants.
Asunto(s)
Membrana Dobles de Lípidos/química , Membranas Artificiales , Surfactantes Pulmonares/química , Albúmina Sérica/química , Animales , Bovinos , Química Física , Tamaño de la Partícula , Tensión SuperficialRESUMEN
Pulmonary surfactants stabilize the lung by way of reducing surface tension at the air-lung interface of the alveolus. 31P NMR, thin-layer chromatography, and electrospray ionization mass spectroscopy of bovine lipid extract surfactant (BLES) confirmed dipalmitoylphosphatidylcholine (DPPC) to be the major phospholipid species, with significant amounts of palmitoyl-oleoylphosphatidylcholine, palmitoyl-myristoylphosphatidylcholine, and palmitoyl-oleoylphosphatidylglycerol. BLES and DPPC spread at the air-water interface were studied through surface pressure area, fluorescence, and Brewster angle microscopy measurements. Langmuir-Blodgett films of monomolecular films, deposited on mica, were characterized by atomic force microscopy. BLES films displayed shape, size, and vertical height profiles distinct from those of DPPC alone. Calcium ions in the subphase altered BLES film domain structure. The addition of cholesterol (4 mol %) resulted in the destabilization of compressed BLES films at higher surface pressures (>40 mN m-1) and the formation of multilayered structures, apparently consisting of stacked monolayers. The studies suggested potential roles for individual surfactant lipid components in supramolecular arrangements, which could be the contributing factors in pulmonary surfactant to attain low surface tension at the air-water interface.
Asunto(s)
Biofisica/métodos , Geles/química , Pulmón/metabolismo , Fosfolípidos/química , Surfactantes Pulmonares/química , 1,2-Dipalmitoilfosfatidilcolina/química , Animales , Bovinos , Cromatografía en Capa Delgada , Lípidos/química , Espectroscopía de Resonancia Magnética , Microscopía de Fuerza Atómica , Espectrometría de Masa por Ionización de Electrospray/métodos , Propiedades de Superficie , Agua/químicaRESUMEN
Monomers of some amphiphiles organize into bilayers to form liposomes and niosomes. Such bilayers are unstable or leaky and hence cholesterol is a common ingredient included to stabilize them. Cholesterol stabilizes bilayers, prevents leakiness, and retards permeation of solutes enclosed in the aqueous core of these vesicles. Other than cholesterol a material with good bilayer-stabilizing properties is yet to be identified. We have substituted cholesterol with fatty alcohols in niosomes containing polyglyceryl-3-di-isostearate (PGDS) and polysorbate-80 (PS-80) to explore their membrane-stabilizing property via permeation studies. Niosomes of polyglyceryl-3-di-isostearate, fatty alcohol/cholesterol, and polysorbate were prepared by ether injection method. Aqueous solution of ketorolac tromethamine (KT) was entrapped in them. The effects of alkyl chain length of fatty alcohols (C(12), C(14), C(16), C(18), and C(16+18)), of acyl chain length of polyoxyethylene sorbitan monoester surfactants, and of the molar ratio of lipid mixture on the release rate of ketorolac from niosomes were assessed by employing modified dissolution-dialysis method. Niosomes with cholesterol or fatty alcohols have exhibited a common release pattern. Niosomes containing fatty alcohol showed a considerably slower release rate of KT than those containing cholesterol. Based on the release rate, fatty alcohols can be ranked as stearylAsunto(s)
Colesterol/química
, Alcoholes Grasos/química
, Liposomas/química