Understanding the Impact of Combined Hydrodynamic Shear and Interfacial Dilatational Stress, on Interface-Mediated Particle Formation for Monoclonal Antibody Formulations.

During biomanufacturing, several unit operations expose solutions of biologics to multiple stresses, such as hydrodynamic shear forces due to fluid flow and interfacial dilatational stresses due to mechanical agitation or bubble collapse. When these stresses individually act on proteins adsorbed to interfaces, it results in an increase in protein particles in the bulk solution, a phenomenon referred to as interface-induced protein particle formation. However, an understanding of the dominant cause, when multiple stresses are acting simultaneously or sequentially, on interface-induced protein particle formation is limited. In this work, we established a unique set-up using a peristaltic pump and a Langmuir-Pockels trough to study the impact of hydrodynamic shear stress due to pumping and interfacial dilatational stress, on protein particle formation. Our experimental results together demonstrate that for protein solutions subjected to various combinations of stress (i.e., interfacial and hydrodynamic stress in different sequences), surface pressure values during adsorption and when subjected to compression/dilatational stresses, showed no change, suggesting that the interfacial properties of the protein film are not impacted by pumping. The concentration of protein particles is an order of magnitude higher when interfacial dilatational stress is applied at the air-liquid interface, compared to solutions that are only subjected to pumping. Furthermore, the order in which these stresses are applied, have a significant impact on the concentration of protein particles measured in the bulk solution. Together, these studies conclude that for biologics exposed to multiple stresses throughout bioprocessing and manufacturing, exposure to air-liquid interfacial dilatational stress is the predominant mechanism impacting protein particle formation at the interface and in the bulk solution.

Correlating Surface Activity with Interface-Induced Aggregation in a High-Concentration mAb Solution.

Interface-induced aggregation resulting in protein particle formation is an issue during the manufacturing and storage of protein-based therapeutics. High-concentration formulations of therapeutic proteins are even more prone to protein particle formation due to increased protein-protein interactions. However, the dependence of interface-induced protein particle formation on bulk protein concentration is not understood. Furthermore, the formation of protein particles is often mitigated by the addition of polysorbate-based surfactants. However, the details of surfactant-protein interactions that prevent protein particle formation at high concentrations remain unclear. In this work, a tensiometer technique was used to evaluate the surface pressure of an industrially relevant mAb at different bulk concentrations, and in the absence and presence of a polysorbate-based surfactant, polysorbate 20 (PS20). The adsorption kinetics was correlated with subvisible protein particle formation at the air-water interface and in the bulk protein solution using a microflow imaging technique. Our results showed that, in the absence of any surfactant, the number of subvisible particles in the bulk protein solutions increased linearly with mAb concentration, while the number of protein particles measured at the interface showed a logarithmic dependence on bulk protein concentration. In the presence of surfactants above the critical micelle concentration (CMC), our results for low-concentration mAb solutions (10 mg/mL) showed an interface that is surfactant-dominated, and particle characterization results showed that the addition of the surfactant led to reduced particle formation. In contrast, for the highest concentration (170 mg/mL), coadsorption of proteins and surfactants was observed at the air-water interface, even for surfactant formulations above CMC and the surfactant did not mitigate subvisible particle formation. Our results taken together provide evidence that the ratio between the surfactant and mAb molecules is an important consideration when formulating high-concentration mAb therapeutics to prevent unwanted aggregation.

Using Passive Microrheology to Measure the Evolution of the Rheological Properties of NIST mAb Formulations during Adsorption to the Air-Water Interface.

The development of novel protein-based therapeutics, such as monoclonal antibodies (mAbs), is often limited due to challenges associated with maintaining the stability of these formulations during manufacturing, storage, and clinical administration. An undesirable consequence of the instability of protein therapeutics is the formation of protein particles. MAbs can adsorb to interfaces and have the potential to undergo partial unfolding as well as to form viscoelastic gels. Further, the viscoelastic properties may be correlated with their aggregation potential. In this work, a passive microrheology technique was used to correlate the evolution of surface adsorption with the evolution of surface rheology of the National Institute of Standards and Technology (NIST) mAb reference material (NIST mAb) and interface-induced subvisible protein particle formation. The evolution of the surface adsorption and interfacial shear rheological properties of the NIST mAb was recorded in four formulation conditions: two different buffers (histidine vs phosphate-buffered saline) and two different pHs (6.0 and 7.6). Our results together demonstrate the existence of multiple stages for both surface adsorption and surface rheology, characterized by an induction period that appears to be purely viscous, followed by a sharp increase in protein molecules at the interface when the film rheology is viscoelastic and ultimately a slowdown in the surface adsorption that corresponds to the formation of solid-like or glassy films at the interface. When the transitions between the different stages occurred, they were dependent on the buffer/pH of the formulations. The onset of these transitions can also be correlated to the number of protein particles formed at the interface. Finally, the addition of polysorbate 80, an FDA-approved surfactant used to mitigate protein particle formation, led to the interface being surfactant-dominated, and the resulting interface remained purely viscous.

Controlled-Release Hydrogel Microspheres to Deliver Multipotent Stem Cells for Treatment of Knee Osteoarthritis.

Osteoarthritis (OA) is the most common form of joint disease affecting articular cartilage and peri-articular tissues. Traditional treatments are insufficient, as they are aimed at mitigating symptoms. Multipotent Stromal Cell (MSC) therapy has been proposed as a treatment capable of both preventing cartilage destruction and treating symptoms. While many studies have investigated MSCs for treating OA, therapeutic success is often inconsistent due to low MSC viability and retention in the joint. To address this, biomaterial-assisted delivery is of interest, particularly hydrogel microspheres, which can be easily injected into the joint. Microspheres composed of hyaluronic acid (HA) were created as MSC delivery vehicles. Microrheology measurements indicated that the microspheres had structural integrity alongside sufficient permeability. Additionally, encapsulated MSC viability was found to be above 70% over one week in culture. Gene expression analysis of MSC-identifying markers showed no change in CD29 levels, increased expression of CD44, and decreased expression of CD90 after one week of encapsulation. Analysis of chondrogenic markers showed increased expressions of aggrecan (ACAN) and SRY-box transcription factor 9 (SOX9), and decreased expression of osteogenic markers, runt-related transcription factor 2 (RUNX2), and alkaline phosphatase (ALPL). In vivo analysis revealed that HA microspheres remained in the joint for up to 6 weeks. Rats that had undergone destabilization of the medial meniscus and had overt OA were treated with empty HA microspheres, MSC-laden microspheres, MSCs alone, or a control vehicle. Pain measurements taken before and after the treatment illustrated temporarily decreased pain in groups treated with encapsulated cells. Finally, the histopathological scoring of each group illustrated significantly less OA damage in those treated with encapsulated cells compared to controls. Overall, these studies demonstrate the potential of using HA-based hydrogel microspheres to enhance the therapeutic efficacy of MSCs in treating OA.

Comparison of Protein Particle Formation in IgG1 mAbs Formulated with PS20 Vs. PS80 When Subjected to Interfacial Dilatational Stress.

Polysorbates (PS) are nonionic surfactants that are commonly included in protein formulations to mitigate the formation of interfacial stress-induced protein particles and thus increase their long-term storage stability. Nonetheless, factors that dictate the efficiency of different polysorbates in mitigating protein particle formation, especially during the application of interfacial stresses, are often ill defined. Here, we used a Langmuir trough to determine the surface activity of two IgG1 monoclonal antibodies formulated with two different polysorbates (PS20 and PS80) when subjected to interfacial dilatational stress. Interfacial properties of these formulations were then correlated with characterization of subvisible protein particles measured by micro-flow imaging (MFI). Both mAbs, when formulated in PS20, demonstrate faster adsorption kinetics and higher surface activity compared to PS80 or surfactant-free formulations. Compression/expansion results suggest that when exposed to interfacial dilatational stresses, both mAb/PS20 formulations display interfacial properties of PS20 alone. In contrast, interfacial properties of both mAb/PS80 formulations suggest mAbs and PS80 are co-adsorbed to the air-water interface. Further, MFI analysis of the interface and the bulk solution confirms that PS20 is more effective than PS80 at mitigating the formation of larger particles in the bulk solution in both mAbs. Concomitantly, the efficiency of PS to prevent interface-induced protein particle formation also depended on the protein's inherent tendency to aggregate at a surfactant-free interface. Together, the studies presented here highlight the importance of determining the interfacial properties of mAbs, surfactants, and their combinations to make informed formulation decisions about the choice of surfactant.

Developability Assessments of Monoclonal Antibody Candidates to Minimize Aggregation During Large-Scale Ultrafiltration and Diafiltration (UF-DF) Processing.

Therapeutic proteins are subjected to a variety of stresses during manufacturing, storage or administration, that often lead to undesired protein aggregation and particle formation. Ultrafiltration-diafiltration (UF-DF) processing of monoclonal antibodies (mAbs) is one such manufacturing step that has been shown to result in such physical degradation. In this work, we explore the use of different analytical techniques and lab-scale setups as methodologies to predict and rank-order the aggregation potential of four different mAbs during large-scale UF-DF processing. In the first part of the study, a suite of biophysical techniques was applied to assess differences in their inherent bulk protein properties including conformational and colloidal stability in a PBS buffer. Additionally, the inherent interfacial properties of these mAbs in PBS were measured using a Langmuir trough technique. In the next part of the study, several different scale-down lab models were evaluated including a lab bench-scale UF-DF setup, mechanical stress (shaking/stirring) studies in vials, and application of interfacial dilatational stress using a Langmuir trough to assess protein particle formation in different UF-DF processing buffers. Taken together, our results demonstrate the ability of a Langmuir-trough methodology to accurately predict the mAb instability profile observed during large scale UF-DF processing.

Evaluating the Combined Impact of Temperature and Application of Interfacial Dilatational Stresses on Surface-mediated Protein Particle Formation in Monoclonal Antibody Formulations.

Formation of submicron and subvisible protein particles (0.1-100 µm) present a major obstacle during processing and storage of therapeutic proteins. While protein aggregation resulting in particle formation is well-understood in bulk solution, the mechanisms of aggregation due to interfacial stresses is less understood. Particularly, in this study, we focus on understanding the combined effect of temperature and application of interfacial dilatational stresses, on interface-induced protein particle formation, using two industrially relevant monoclonal antibodies (mAbs). The surface activity of Molecule C (MC) and Molecule B (MB) were measured at room temperature (RT) and 4 °C in the absence and presence of interfacial dilatation stress using a Langmuir trough. These results were correlated with Micro-flow imaging (MFI) to characterize formation of subvisible protein particles at the interface and in the bulk solution. Our results show that the surface activity for both proteins is temperature dependent. However, the extent of the impact of temperature on the mechanical properties of the monomolecular protein films when subjected to dilatational stresses is protein dependent. Protein particle analysis provided evidence that protein particles formed in bulk solution originate at the interface and are dependent on both application of thermal stresses and interfacial dilatational stresses. In the absence of any interfacial stresses, more and larger protein particles were formed at the interface at RT than at 4 °C. When mAb formulations are subjected to interfacial dilatational stresses, protein particle formation in bulk solution was found to be temperature dependent. Together our results validate that mAb solutions maintained at 4 °C can lower the surface activity of proteins and reduce their tendency to form interface-induced protein particles both in the absence and presence of interfacial dilatational stresses.

Hyaluronic Acid Hydrogel Microspheres for Slow Release Stem Cell Delivery.

Cell therapies are hampered by a lack of available delivery systems, resulting in inconsistent outcomes in animal studies and human clinical trials. Hydrogel encapsulants offer a broad range of tunable characteristics in the design of cell delivery vehicles. The focus of the hydrogel field has been on durable encapsulants that provide long-term paracrine function of the cells. However, some cell therapies require cell-to-cell contact in order to elicit their effect. Controlled release microencapsulants would be beneficial in these situations, but appropriate polymers have not been adaptable to microsphere manufacturing because they harden too slowly. We developed and tested a novel microencapsulant formulation (acrylated hyaluronic acid: AHA) with degradation characteristics as a controlled release cell delivery vehicle. The properties of AHA microspheres were evaluated and compared to those of poly(ethylene glycol) diacrylate (PEGDA), a durable hydrogel. AHA microspheres possessed a higher swelling ratio, lower diffusion barrier, faster degradation rate, a lower storage modulus, and a larger average diameter than microspheres composed of PEGDA. Additionally, in vitro cell viability and release and short-term in vivo biocompatibility in immune competent Sprague-Dawley rats was assessed for each microsphere type. Compared to PEGDA, microspheres composed of AHA resulted in significantly less foreign body response in vivo as measured by a lack of cellularity or fibrotic ring in the surrounding tissue and no cellular infiltration into the microsphere. This study illustrates the potential of AHA microspheres as a degradable cell delivery system with superior encapsulated cell viability and biocompatibility with the surrounding tissue.

Lung Surfactant Decreases Biochemical Alterations and Oxidative Stress Induced by a Sub-Toxic Concentration of Carbon Nanoparticles in Alveolar Epithelial and Microglial Cells.

Carbon-based nanomaterials are nowadays attracting lots of attention, in particular in the biomedical field, where they find a wide spectrum of applications, including, just to name a few, the drug delivery to specific tumor cells and the improvement of non-invasive imaging methods. Nanoparticles inhaled during breathing accumulate in the lung alveoli, where they interact and are covered with lung surfactants. We recently demonstrated that an apparently non-toxic concentration of engineered carbon nanodiamonds (ECNs) is able to induce oxidative/nitrosative stress, imbalance of energy metabolism, and mitochondrial dysfunction in microglial and alveolar basal epithelial cells. Therefore, the complete understanding of their "real" biosafety, along with their possible combination with other molecules mimicking the in vivo milieu, possibly allowing the modulation of their side effects becomes of utmost importance. Based on the above, the focus of the present work was to investigate whether the cellular alterations induced by an apparently non-toxic concentration of ECNs could be counteracted by their incorporation into a synthetic lung surfactant (DPPC:POPG in 7:3 molar ratio). By using two different cell lines (alveolar (A549) and microglial (BV-2)), we were able to show that the presence of lung surfactant decreased the production of ECNs-induced nitric oxide, total reactive oxygen species, and malondialdehyde, as well as counteracted reduced glutathione depletion (A549 cells only), ameliorated cell energy status (ATP and total pool of nicotinic coenzymes), and improved mitochondrial phosphorylating capacity. Overall, our results on alveolar basal epithelial and microglial cell lines clearly depict the benefits coming from the incorporation of carbon nanoparticles into a lung surfactant (mimicking its in vivo lipid composition), creating the basis for the investigation of this combination in vivo.

Remote Sensing and Remote Actuation via Silicone-Magnetic Nanorod Composites.

The capacity for a soft material to combine remote sensing and remote actuation is highly desirable for many applications in soft robotics and wearable technologies. This work presents a silicone elastomer with a suspension of a small weight fraction of ferromagnetic nickel nanorods, which is capable of both sensing deformation and altering stiffness in the presence of an external magnetic field. Cylinders composed of silicone elastomer and 1% by weight nickel nanorods experience large increases in compressive modulus when exposed to an external magnetic field. Incremental compressions totaling 600 g of force applied to the same silicone-nanorod composites increase the magnetic field strength measured by a Hall effect sensor enabling the material to be used as a soft load cell capable of detecting the rate, duration, and magnitude of force applied. In addition, lattice structures are 3D printed using an ink composed of silicone elastomer and 1% by weight nickel nanorods, which possess the same sensing capacity.

Impact of Polysorbate 80 Grade on the Interfacial Properties and Interfacial Stress Induced Subvisible Particle Formation in Monoclonal Antibodies.

Polysorbate 80 is a nonionic surfactant that is added to therapeutic protein formulations to mitigate protein particle formation when subjected to various mechanical stresses. Variations in the PS80 grade has recently sparked questions surrounding the effect of oleic acid content (OAC) on surfactant's ability to mitigate interface-induced protein particle formation when stressed. In this work, a Langmuir trough was used to apply interfacial dilatational stress to two IgG molecules (mAb1 and mAb2) in formulations containing Chinese pharmacopeia (CP) and multicompendial (MC) grades of PS80. The interfacial properties of these mAb formulations, with and without interfacial dilatational stresses, were correlated with subvisible particle count and particle size/morphology distributions as measured by Micro-flow imaging (MFI). Overall, differences in interfacial properties correlated well with protein particle formation for both molecules in the two PS80 formulations. Further, the impact of grade of PS80 on the interfacial properties and interfacial stress-induced protein particle formation depends on the adsorption kinetics of the IgG molecules as well as the concentration of the surfactant used. This study demonstrates that measuring the interfacial properties of mAb formulations can be a useful tool to predict interfacial stress induced protein particle formation in the presence of different excipients of varying quality.

Viscoelastic Properties of ECM-Rich Embryonic Microenvironments.

The material properties of tissues and their mechanical state is an important factor in development, disease, regenerative medicine and tissue engineering. Here we describe a microrheological measurement technique utilizing aggregates of microinjected ferromagnetic nickel particles to probe the viscoelastic properties of embryonic tissues. Quail embryos were cultured in a plastic incubator chamber located at the center of two pairs of crossed electromagnets. We found a pronounced viscoelastic behavior within the ECM-rich region separating the mesoderm and endoderm in Hamburger Hamilton stage 10 quail embryos, consistent with a Zener (standard generalized solid) model. The viscoelastic response is about 45% of the total response, with a characteristic relaxation time of 1.3 s.

Development of lipid membrane based assays to accurately predict the transfection efficiency of cell-penetrating peptide-based gene nanoparticles.

Successful gene therapy requires the development of vectors that enable efficient delivery of genetic materials (e.g., pDNA or siRNA) to targeted cells, without degradation of the genetic materials. We have shown that nanoparticles formed by combining cell-penetrating peptide and pDNA (CPP-pDNA) into complexes and condensing them with calcium chloride can provide gene nanoparticles with high transfection efficiency and low cytotoxicity. In this work, we compare in situ measurements of the membrane insertion potential of three arginine-based gene nanoparticles (RW9-NPs, R9-NPs, and RH9-NPs) using four lipid compositions and two types of model membrane (Langmuir monolayers vs. supported bilayers) with their transfection efficiency in two human cancer cell lines. Using a Langmuir trough, we measured the membrane insertion potential of our gene nanoparticles to model membrane monolayers. A Quartz Crystal Microbalance with Dissipation (QCM-D) technique was used to monitor the adsorption of these nanoparticles to lipid bilayers of various compositions. Finally, gene expression using these nanoparticles was measured in breast cancer and cervical cancer cell lines. Our cell culture studies indicate that although R9-NPs and RW9-NPs show a significant increase in transfection efficiency compared to free pDNA, RH9-NPs do not show any significant difference. Both the Langmuir monolayer and QCM-D bilayer studies show that these results are best reflected in the in situ measurement assays when lipid systems containing a mixture of phospholipids, cholesterol, and sphingolipids are used. It is important to note that the mechanism of penetration is expected to differ for RW9 vs. R9; however, gene nanoparticles containing either of these CPPs show similar transfection efficiency. Our results therefore demonstrate that the design of predictive assays for gene therapy using CPPs must involve carefully chosen model lipid membrane systems that accurately represent the varying compositions of cell membranes.

Impact of Engineered Carbon Nanodiamonds on the Collapse Mechanism of Model Lung Surfactant Monolayers at the Air-Water Interface.

Understanding interactions between inhaled nanoparticles and lung surfactants (LS) present at the air-water interface in the lung, is critical to assessing the toxicity of these nanoparticles. Specifically, in this work, we assess the impact of engineered carbon nanoparticles (ECN) on the ability of healthy LS to undergo reversible collapse, which is essential for proper functioning of LS. Using a Langmuir trough, multiple compression-expansion cycles are performed to assess changes in the surface pressure vs. area isotherms with time and continuous cyclic compression-expansion. Further, theoretical analysis of the isotherms is used to calculate the ability of these lipid systems to retain material during monolayer collapse, due to interactions with ECNs. These results are complemented with fluorescence images of alterations in collapse mechanisms in these monolayer films. Four different model phospholipid systems, that mimic the major compositions of LS, are used in this study. Together, our results show that the ECN does not impact the mechanism of collapse. However, the ability to retain material at the interface during monolayer collapse, as well as re-incorporation of material after a compression-expansion cycle is altered to varying extent by ECNs and depends on the composition of the lipid mixtures.

Novel machine learning application for prediction of membrane insertion potential of cell-penetrating peptides.

Cell-penetrating peptides (CPPs) are often used as transporter systems to deliver various therapeutic agents into the cell. We developed a novel machine learning application which can quantitatively screen the insertion/interaction potential of various CPPs into three model phospholipid monolayers. An artificial neural network (ANN) was designed, trained, and ultimately tested on an external dataset using Langmuir experimental data for 13 CPPs (hydrophilic and amphiphilic) together with various features related to the insertion/interaction efficiency of CPPs. The trained ANN provided accurate predictions of the maximum change in surface pressure of CPPs when injected below three membrane models at pH 7.4. The accuracy of predictions was high for the dataset which was used to construct the model (r2 = 0.986) as well as for the external "prospective" dataset (r2 = 0.969). In conclusion, this study demonstrates the promising potential of ANNs for screening the insertion potential of CPPs into membrane models for efficient intracellular delivery of therapeutic agents.

Self-Assembled Coacervates of Chitosan and an Insect Cuticle Protein Containing a Rebers-Riddiford Motif.

The interactions among biomacromolecules within insect cuticle may offer new motifs for biomimetic material design. CPR27 is an abundant protein in the rigid cuticle of the elytron from Tribolium castaneum. CPR27 contains the Rebers-Riddiford (RR) motif, which is hypothesized to bind chitin. In this study, active magnetic microrheology coupled with microscopy and protein particle analysis techniques were used to correlate alterations in the viscosity of chitosan solutions with changes in solution microstructure. Addition of CPR27 to chitosan solutions led to a 3-fold drop in viscosity. This change was accompanied by the presence of micrometer-sized coacervate particles in solution. Coacervate formation had a strong dependence on chitosan concentration. Analysis showed the existence of a critical CPR27 concentration beyond which a significant increase in particle count was observed. These effects were not observed when a non-RR cuticular protein, CP30, was tested, providing evidence of a structure-function relationship related to the RR motif.

Non-toxic engineered carbon nanodiamond concentrations induce oxidative/nitrosative stress, imbalance of energy metabolism, and mitochondrial dysfunction in microglial and alveolar basal epithelial cells.

Engineered nanoparticles are finding a wide spectrum of biomedical applications, including drug delivery and capacity to trigger cytotoxic phenomena, potentially useful against tumor cells. The full understanding of their biosafety and interactions with cell processes is mandatory. Using microglial (BV-2) and alveolar basal epithelial (A549) cells, in this study we determined the effects of engineered carbon nanodiamonds (ECNs) on cell viability, nitric oxide (NO) and reactive oxygen species (ROS) production, as well as on energy metabolism. Particularly, we initially measured decrease in cell viability as a function of increasing ECNs doses, finding similar cytotoxic ECN effects in the two cell lines. Subsequently, using apparently non-cytotoxic ECN concentrations (2 µg/mL causing decrease in cell number < 5%) we determined NO and ROS production, and measured the concentrations of compounds related to energy metabolism, mitochondrial functions, oxido-reductive reactions, and antioxidant defences. We found that in both cell lines non-cytotoxic ECN concentrations increased NO and ROS production with sustained oxidative/nitrosative stress, and caused energy metabolism imbalance (decrease in high energy phosphates and nicotinic coenzymes) and mitochondrial malfunctioning (decrease in ATP/ADP ratio).These results underline the importance to deeply investigate the molecular and biochemical changes occurring upon the interaction of ECNs (and nanoparticles in general) with living cells, even at apparently non-toxic concentration. Since the use of ECNs in biomedical field is attracting increasing attention the complete evaluation of their biosafety, toxicity and/or possible side effects both in vitro and in vivo is mandatory before these highly promising tools might find the correct application.

pH-Induced Changes in the Surface Viscosity of Unsaturated Phospholipids Monitored Using Active Interfacial Microrheology.

Lipid membranes, a major component of cells, are subjected to significant changes in pH depending on their location in the cell: the outer leaflet of the cell membrane is exposed to a pH of 7.4 whereas lipid membranes that make up late endosomes and lysosomes are exposed to a pH of as low as 4.4. The purpose of this study is to evaluate how changes in the environmental pH within cells alter the fluidity of phospholipid membranes. Specifically, we studied pH-induced alterations in the surface arrangement of monounsaturated lipids with zwitterionic headgroups (phosphoethanolamine (PE) and phosphocholine (PC)) that are abundant in plasma membranes as well as anionic lipids (phosphatidylserine (PS) and phosphatidylglycerol (PG)) that are abundant in inner membranes using a combination of techniques including surface tension vs area measurements, interfacial microrheology, and fluorescence/atomic force microscopy. Using an active interfacial microrheology technique, we find that phospholipids with zwitterionic headgroups show a significant increase in their surface viscosity at acidic pH. This increase in surface viscosity is also found to depend on the size of the lipid headgroup, with a smaller headgroup showing a greater increase in viscosity. The observed pH-induced increase in viscosity is also accompanied by an increase in the cohesion pressure between zwitterionic molecules at acidic pH and a decrease in the average molecular area of the lipids, as measured by fitting the surface pressure isotherms to well-established equations of state. Because fluorescent images show no change in the phase of the lipids, we attribute this change in surface viscosity to the pH-induced reorientation of the P--N+ dipoles that form part of the polar lipid headgroup, resulting in increased lipid-lipid interactions. Anionic PG headgroups do not demonstrate this pH-induced change in viscosity, suggesting that the presence of a net negative charge on the headgroup causes electrostatic repulsion between the headgroups. Our results also show that active interfacial microrheology is a sensitive technique for detecting minute changes in the lipid headgroup orientation induced by changes in the local membrane environment, even in unsaturated phospholipids where the surface viscosity is close to the experimental detection limit.

Evaluating the Role of the Air-Solution Interface on the Mechanism of Subvisible Particle Formation Caused by Mechanical Agitation for an IgG1 mAb.

Mechanical agitation of monoclonal antibody (mAb) solutions often leads to protein particle formation. In this study, various formulations of an immunoglobulin G (IgG) 1 mAb were subjected to different controlled interfacial stresses using a Langmuir trough, and protein particles formed at the interface and measured in bulk solution were characterized using atomic force microscopy and flow digital imaging. Results were compared to mAb solutions agitated in glass vials and unstressed controls. At lower pH, mAb solutions exhibited larger hysteresis in their surface pressure versus area isotherms and increased number of particles in bulk solution, when subjected to interfacial stresses. mAb samples subjected to 750-1000 interfacial compression-expansion cycles in 6 h contained high particle numbers in bulk solution, and displayed similar particulation trends when agitated in vials. At compression rates of 50 cycles in 6 h, however, particle levels in mAb solutions were comparable to unstressed controls, despite protein aggregates being present at the air-solution interface. These results suggest that while the air-solution interface serves as a nucleation site for initiating protein aggregation, the number of protein particles measured in bulk mAb solutions depends on the total number of compression cycles that proteins at the air-solution interface are subjected to within a fixed time.

Physiochemical Properties of Aluminum Adjuvants Elicit Differing Reorganization of Phospholipid Domains in Model Membranes.

Most vaccines contain aluminum adjuvants; however, their exact mechanism of action remains unclear. A novel mechanism by Shi and colleagues proposes aluminum adjuvants may enhance immune activation by binding and reorganizing lipids that are key components of lipid rafts. To better understand the specificity of interaction between aluminum adjuvants and the cell membrane lipids, we present a biophysical study of lipid domain clustering in simple model phospholipid monolayers containing dipalmitoyl-phosphatidylcholine (DPPC) and dioleoyl-phosphatidylcholine (DOPC) exposed to two aluminum adjuvants, Alhydrogel and Adju-Phos. Surface pressure measurements and fluorescence microscopy images verified aluminum adjuvant-induced increase in lipid domain size, even in the key lipid raft components. Additionally, adjuvant induced lipid clustering differed based on the physicochemical properties of the adjuvants. Alhydrogel appeared to reduce monolayer compressibility and insert into the monolayer, while Adju-Phos induced more significant changes in domain size, without compromising the integrity of the monolayer. The Alhydrogel and Adju-Phos-mediated reorganization of phospholipid domains reported here supports the new mechanistic paradigm proposed by Shi and co-workers, and further suggests that lipid clustering is induced even in simple phospholipid membranes. The results present the basis for future exploration into lipid-mediated mechanisms of action for adjuvants.