RESUMEN
Magnetic binary oxide particles (MBOP) were prepared by template method using chitosan in the laboratory for the removal of As(III) from water. The prepared MBOP has super paramagnetic property which is sufficient for magnetic separation. Column study was performed at two different flow rates of 2.0ml/min and 5.0ml/min and comparison was made with regenerated MBOP, commercial activated carbon and commercial activated alumina. It is observed that fresh MBOP has higher breakthrough time and capacity than regenerated MBOP by a factor of 1.25 and 1.37 respectively. In Logit method, the values of K (adsorption rate constant) and N (adsorption capacity coefficient) were obtained as 0.2066 (L/mgh) and 1014(mg/L) for 5.0ml/min flow rate. All the drinking water parameters are within the limit of BIS 10500-2012. Toxicity characteristic leaching procedure (TCLP) and semi dynamic tests were performed for the mix ratios of 01:02:01, 01:02:05 and 01:02:10 and were found safe for the disposal.
