RESUMEN
One of the exciting developments in contemporary luminescence research is the development of rare earth triggered luminescent glasses, which are a type of lanthanide activated luminous material. For the first time, Ce3+, Eu3+ activated/co-activated Mg21Ca4Na4(PO4)18 orthophosphate glasses have been synthesized using the proposed work's melt quenching technique. The proposed glass sample's XRD pattern has an amorphous character, although its most prominent peak matches data from the Mg21Ca4Na4(PO4)18 standard ICSD database. FT-IR analysis was used to analyze the proposed glass sample's vibrational characteristics. Co-activated Mg21Ca4Na4(PO4)18 glass exhibits large emission peaks under UV excitations that cover the far red area during a photoluminescence examination. These outcomes demonstrate the proposed sample's value in applications such as WLEDs and plant cultivation.
RESUMEN
This study describes the luminous properties of Pb5(PO4)3Br doped with RE3+ (RE = Dy3+, Eu3+ and Tb3+) synthesised using the solid-state method. The synthesised phosphor was characterised using Fourier-transform infrared, X-ray diffraction, scanning electron microscopy and photoluminescence measurements. Dy3+-doped Pb5(PO4)3Br phosphor exhibited blue and yellow emissions at 480 and 573 nm, respectively, on excitation at 388 nm. Eu3+-doped Pb5(PO4)3Br phosphor exhibited orange and red emissions at 591 and 614 nm, respectively, on excitation at λex = 396 nm. Pb5(PO4)3Br:Tb3+ phosphor exhibited the strongest green emission at 547 nm on excitation at λex = 380 nm. Additionally, the effect of the concentration of rare-earth ions on the emission intensity of Pb5(PO4)3Br:RE3+ (RE3+ = Dy3+, Eu3+ and Tb3+) phosphors was investigated.
Asunto(s)
Europio , Luminiscencia , Sustancias Luminiscentes , Europio/química , Sustancias Luminiscentes/química , Sustancias Luminiscentes/síntesis química , Terbio/química , Fosfatos/química , Mediciones Luminiscentes , Difracción de Rayos X , Plomo/químicaRESUMEN
Monte Carlo (MC) techniques have been recognized as the gold standard for the simulation of radiation transport in radiotherapy. The aim of the study is to perform dosimetric evaluation of Simultaneous Integrated Boost (SIB) radiation treatment planning using MC simulation approach. The geometrical source modeling and simulation of 6 MV Flattening Filter Free (FFF)beam from TrueBeam linear accelerator have been carried out to simulate Volumetric Modulated Arc Therapy (VMAT) plans using MC simulation software PRIMO. All the SIB plans have been generated using VMAT techniques for patients with locally advanced postoperative head-and-neck squamous cell carcinoma in Eclipse Treatment Planning System (TPS) retrospectively. TPS plans have been compared against their respective MC-simulated plans in PRIMO. The quality assessments of plans have been performed using several dose volume parameters, plan quality indices, and methods of gamma analysis. Dmean, D50%, and D2% received by planning target volume (PTV), PTV60, and PTV52 have been found significantly lower in TPS-generated plans compared to MC-simulated plans. D100%, D98%, and D95% received by PTV60 exhibit good agreement. However, PTV52 shows a significant deviation between TPS and MC plans. The mean organ-at-risk doses have been found significantly lower in TPS plans compared to MC plans. TPS and MC plans have been found in close agreement within gamma acceptance criteria of 3% Dose Difference (DD) and 3 mm Distance to Agreement (DTA). Dose distributions computed using MC simulation techniques are reliable, accurate, and consistent with analytical anisotropic algorithm. Plan quality indices have been found slightly compromised in MC-simulated plans compared with TPS-generated plans appeared to be a true representation of real dose distribution obtained from MC simulation technique. Validation using MC simulation approach provides an independent secondary check for ensuring accuracy of TPS-generated plan.
RESUMEN
Phosphites are the new emerging candidates in the field of luminescence in the modern era. In the present investigation, Tb3+/Eu3+ activated/co-activated LiAl(PO3)4 phosphor was prepared by a wet chemical method, and the effect of R+ (Na+, K+) ions on photoluminescence (PL) properties of these phosphors are investigated. Phase identification and crystal structure of the prepared phosphor were determined using XRD and Rietveld refinement, respectively. Morphological study and elemental analysis of the proposed phosphor with elemental analysis of the sample were performed using SEM and EDS. The PL properties of the proposed phosphor showed three simultaneous emission peaks in the visible range, giving color-tunable emission. The charge compensation of Na+ and K+ ions make a significant impact on the PL intensity of Tb3+, Eu3+ co-activated LiAl(PO3)4 phosphors. The PL intensity of Tb3+, Eu3+ co-activated LiAl(PO3)4 phosphors was significantly enhanced by factors 1.2 and 1.4 when Na+ and K+ charge compensators, respectively, were introduced. To manifest the charge compensation effect of alkali metals the optimum intense sample in the co-doped sample was used. These results indicate the potential candidacy of the studied phosphor for further improvement in PL properties for application in solid-state lighting.
RESUMEN
Visible and near-infrared (NIR) upconversion luminescence (UCL) emissions originating from the BaY2F8: Yb3+, Tm3+ systems were investigated under a laser excitation at 980 nm. The BaY2F8:20 mol% Yb3+, x mol% Tm3+ and BaY2F8: y mol% Yb3+, 0.5 mol% Tm3+ phosphors showed prominent UCL at 800 and 810 nm. The optimized doping concentrations of Yb3+ and Tm3+ in the BaY2F8 host matrix were evaluated, their spectroscopic properties were determined, and studies on their temperature-dependent behaviour were carried out. The temperature-sensing properties were studied by generating the fluorescence intensity ratio (FIR) of the UCL peaks originating from the thermally-coupled energy levels of the Tm3+ ions. The Stark sublevels of 1G4 level of Tm3+ ions were utilized to estimate the temperature-sensing abilities of the phosphor.
RESUMEN
The Ho3+-doped YVO4 phosphors were successfully prepared via a sol-gel process in which citric acid was used as a chelating agent. X-ray diffraction (XRD) confirmed the effective inclusion of Ho3+ ions into the host matrix with the formation of single phase YVO4. The surface morphology was observed using SEM, the results of which showed a grain growth propensity and the agglomeration of prepared phosphors. The V-O (VO4 3-) vibration mode was analyzed through Fourier transform infrared (FTIR) spectra. The spectroscopic properties were reported through UV-vis-NIR diffuse reflectance and photoluminescence (PL) spectra. The Judd-Ofelt (J-O) intensity parameters Ω 2 = 0.03 × 10-20 cm2, Ω 4 = 0.22 × 10-20 cm2, and Ω 6 = 0.23 × 10-20 cm2 obtained for the Y0.97VO4:0.03Ho3+ phosphors were used to obtain the total transition probabilities (A T), radiative lifetimes (τ rad) and branching ratios (ß) for the certain transitions of Ho3+ ions. Under 310 nm UV excitation, the visible emission spectra were measured, and an intense emission was observed around 541 nm (green region) for all the samples. The emission cross-section σ P(λ) was 3.22 × 10-21 cm2 and the branching ratio (ß) was 0.816; these were investigated to capture the optimal concentration of the Y0.97VO4:0.03Ho3+ phosphor. The estimated color coordinates were observed in the green region of CIE diagram. Ultimately, the superior properties (σ P(λ), ß, and color purity) of Y0.97VO4:0.03Ho3+ phosphor may make it suitable for green emitting devices.
RESUMEN
[This retracts the article DOI: 10.1039/C6RA04913C.].
RESUMEN
INTRODUCTION: Prostate cancer is one of the most common malignant tumors in men and is usually treated with advanced intensity modulated radiation therapy (IMRT) and volumetric modulated arc therapy (VMAT). Significant uncorrected interfractional 6-Dimensional setup errors could impact the delivered dose. The aim of this study was to assess the dosimetric impact of 6D interfractional setup errors in hypofractionated prostate cancer using daily kilovoltage cone-beam computed tomography (kV-CBCT). METHODS: This retrospective study comprised twenty prostate cancer patients treated with hypofractionated IMRT (8) and VMAT (12) with daily kV-CBCT image guidance. Interfraction 6D setup errors along lateral, longitudinal, vertical, pitch, roll, and yaw axes were evaluated for 400 CBCTs. For targets and organs at risk (OARs), the dosimetric impact of rotational error (RError), translational error (TError), and translational plus rotational error (T+RError) were evaluated on kV-CBCT images. RESULTS: The single fraction maximum TError ranged from 12-20 mm, and the RError ranged from 2.80-3.00. The maximum mean absolute dose variation ΔD in D98% (dose to 98% volume) of CTV-55 and PTV-55 was -0.66±0.82 and -5.94±3.8 Gy, respectively, in the T+RError. The maximum ΔD (%) for D98% and D0.035cc in CTV-55 was -4.29% and 2.49%, respectively, while in PTV-55 it was -24.9% and 2.36%. The mean dose reduction for D98% in CTV-55 and D98% and D95% in PTV-55 was statistically significant (p<0.05) for TError and T+RError. The mean dose variation for Dmean and D50% in the rectum was statistically significant (p<0.05) for TError and T+RError. CONCLUSION: The uncorrected interfractional 6D setup error results in significant target underdosing and OAR overdosing in prostate cancer. This emphasizes the need to correct interfractional 6D setup errors daily in IMRT and VMAT.
Asunto(s)
Neoplasias de la Próstata , Radioterapia de Intensidad Modulada , Tomografía Computarizada de Haz Cónico Espiral , Masculino , Humanos , Radioterapia de Intensidad Modulada/métodos , Planificación de la Radioterapia Asistida por Computador/métodos , Estudios Retrospectivos , Tomografía Computarizada de Haz Cónico/métodos , Neoplasias de la Próstata/diagnóstico por imagen , Neoplasias de la Próstata/radioterapia , Neoplasias de la Próstata/patologíaRESUMEN
Semiconductor assisted photocatalysis is one of the most efficient methods for the degradation of complex organic dyes. A major limiting factor of semiconductor assisted photocatalysis is the requirement of a continuous source of light to perform a redox reaction. One of the upcoming solutions is photon energy-storing long afterglow/persistent phosphors. They are an unusual kind of rechargeable, photon energy capturing/trapping phosphors that can trap charge carriers (electrons/holes) in their meta-stable energy levels, thereby resulting in persistent luminescence. Persistence luminescence from such materials can range from minutes to hours. The coupling of long afterglow phosphors (LAP) with the conventional semiconductor is a promising way to support the photocatalytic process even in dark. In addition, dissimilar band structures of LAPs and semiconductor results in formation of heterojunction which further suppresses the recombination of charge. Such an encouraging idea of LAP for round-the-clock working photocatalytic system is in its premature stage; which is required to be investigated fully. Thus, we present a state-of-art review on the potential materials for assisting round-the-clock photocatalysis, trapping-detrapping mechanism in LAP materials, fabrication strategies and their associated characterization tools. Review also covers LAP materials and their photocatalytic mechanism briefly.
RESUMEN
This work presents the optimized luminescence spectra for the Ce3+ ,Sm3+ -doped NaSrPO4 phosphor that was synthesized using a wet chemical method. Ce3+ and Sm3+ are activator impurities that show spectral splitting bands that corresponds to the d-f and f-f transitions, respectively. These impurity elements shows the characteristics spectral bands when doped with the NaSrPO4 host lattice. Spectral splitting in the Ce3+ excitation band was monitored in the 240-340 nm range, in which the observed bands were located at 269 nm, 292 nm and 321 nm, and emission bands were observed in the broad spectral range 330-430 nm. However, when Sm3+ ion was doped in the same host lattice we obtained a characteristic emission band at 590 and 645 nm in the orange-red region, under sharp excitation bands located at 345, 361, 375, and 403 nm respectively. Also, we carried out energy transfer analysis in the Ce3+ /Dy3+ -doped NaSrPO4 phosphor. Further crystalline phase and the nanophase nature of the phosphor compound were confirmed using X-ray diffraction and transmission electron microscopy analyses.
RESUMEN
The article briefly reports the fundamental scientific principles and landmarks in the field of luminescence and further enlightens the importance of persistent phosphor that is now widely used in luminous paints. Its main focus is on phosphorescence that makes use of lanthanides that have gained paramount importance in various cross-sections of luminescent applications. Both inorganic and organic afterglow materials, synthesis and characterization along with skilled researchers' essential updates on emerging trends and efforts are elucidated at length. It exclusively reviews the red/green/blue organic/inorganic/hybrid phosphorescent materials and the latest advances in the development of novel long afterglow materials that can accelerate the green technology in the world of luminescence.
Asunto(s)
Elementos de la Serie de los Lantanoides , Sustancias Luminiscentes , Luminiscencia , PinturaRESUMEN
Mineral fluorite or fluorspar (CaF2 ) can host significant quantities of trivalent REE3+ (rare earth element) by substitution with divalent Ca2+ . The fluorites associated with carbonatites are often REE-rich compared to those derived from sedimentary, hydrothermal, or Mississippi Valley-type (MVT) fluorites. The naturally occurring fluorites have several industrial applications one of which is for luminescence. Whether or not REE enriched, the fluorite makes an ideal host for REEs, which are very important phosphors. The naturally occurring fluorites are available in sufficient quantities to cater to the industrial demand. Investigations have been carried out on the fluorites from active fluorite mines at Dongargaon in central India. Thermoluminescence behavior of a natural fluorite sample was investigated using a Nucleonix TL 1009I thermoluminescence reader. Multiple traps formed in the broad thermoluminescent (TL) glow curve were found by TL anal deconvolution software. Trapping parameters for all multiple traps formed on deconvoluting broad TL glow curve were found by different methods like Initial rise method, Chen's Peak shape method and Ilich method.
Asunto(s)
Luminiscencia , Mediciones Luminiscentes , India , Dosimetría Termoluminiscente , Difracción de Rayos XRESUMEN
A trivalent Dy3+ -activated K3 Ca2 (SO4 )3 F fluoride-based phosphor was synthesized using a solid-state reaction method and characterized for its thermoluminescence (TL) application. The crystal structure and surface morphology of the as-synthesized material was analyzed using X-ray diffraction and scanning electron microscopy. A series of the K3 Ca2 (SO4 )3 F:Dy3+ phosphor was irradiated using γ-rays from a 60 Co source and TL glow curves were recorded using a Nucleonix 1009I TL reader. The glow curve of the prepared phosphor showed a prominent single peak at 278°C. TL characteristics were maximum intensity at 1 mol% of Dy3+ ion with a single TL glow peak. The TL glow curve revealed linearity with increase in exposure dose range from 0.1 kGy to 3.0 kGy. Theoretical analysis of the TL glow curve of the γ-ray-irradiated sample was carried out using a computerized glow curve deconvolution method and trapping parameters such as activation energy and frequency factor were calculated using the initial rise method and Ilich's method. The synthesized Dy3+ -doped K3 Ca2 (SO4 )3 phosphor revealed excellent TL properties and was found to be a potential candidate for dosimetric applications.
Asunto(s)
Fluoruros , Cinética , Dosimetría Termoluminiscente , Difracción de Rayos XRESUMEN
Dosimetry is a technique that quantitatively measures the ionizing radiation absorbed by matter. The present study was conducted on the barites from a mine at Dongargaon in Central India. Morphological and structural analysis of proposed sample was carried out using X-ray diffraction and standard error of the mean. Thermal analysis and chemical composition of the proposed sample were carried out using thermogravimetric analysis and differential thermal analysis, and electron probe microanalysis. Thermoluminescence (TL) studies on a natural barite sample were performed using a Nucleonix TL1009I TL reader following sample irradiation with γ-rays generated from a 60 Co irradiation source. A broad TL glow curve was observed after TL study that was then deconvoluted using TLanal deconvolution software. Trapping parameters from the sample such as activation energy (E), order of kinetics (b), and frequency factor (s) were calculated using Chen's peak shape method, the initial rise method, and Ilich's method. The results indicated that the natural barite sample could be used in high-dose TL dosimetric applications in various fields.
Asunto(s)
Sulfato de Bario , Mediciones Luminiscentes , Rayos gamma , India , Dosimetría Termoluminiscente , Difracción de Rayos XRESUMEN
In this work, RE3+ (Eu, Ce and Sm)-activated Ca10 (PO4 )6 F2 (fluorapatite) phosphors were synthesized by doping with different apatite minerals (SO4 , VO4, WO4 ) using a solid-state diffusion method. Optical and structural characterizations were performed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy, and photoluminescence (PL) spectroscopy. XRD characterization showed the crystalline nature of the phosphor. PL properties were investigated under ultraviolet light excitation for all three rare earths. CIE chromaticity revealed the colour emitted in the visible region. Luminescence intensity was enhanced considerably by tuning the host matrices after core-shell formation by substitution with other ions producing promising candidates for white light-emitting diode materials.
Asunto(s)
Doping en los Deportes , Sustancias Luminiscentes , Europio , Luminiscencia , MineralesRESUMEN
The photoluminescence excitation and emission spectra of BaSO3 Cl2 :Ce3+ phosphor were investigated. Excitation wavelength was 323 nm. The phosphor was prepared using a combustion synthesis method. The emission spectrum exhibited a well defined asymmetric band with a maximum at 445 nm for higher emission concentrations. The prepared samples were characterized by X-ray diffraction, scanning electron microscopy, photoluminescence and Commission Internationale de l'éclairage colour coordinates; emission intensity was related to relative Ce3+ concentration. These developments enabled the rapid and energy-efficient production of fine particles in the powder form with little expenditure. No additional emission band was observed in the emission spectra, demonstrating that the Ce3+ ion occupied one category of site in the prepared host phosphor.
Asunto(s)
Luminiscencia , Microscopía Electrónica de Rastreo , Difracción de Rayos XRESUMEN
In the present study, the thermoluminescence (TL) properties of an Eu3+ -doped CaNa2 (SO4 )2 phosphor were studied. The Eu3+ -doped CaNa2 (SO4 )2 phosphor was synthesized using the combustion method. The samples were well crystallized in the monoclinic phase. The TL glow curve of the Eu3+ -doped CaNa2 (SO4 )2 phosphor showed a single prominent peak at around 210°C with showed linearity on increasing exposure. The response curve of the synthesized phosphor showed linearity in the range 500-7000 Gy. Trapping parameters of synthesized phosphors such as activation energy, frequency factor, and order of kinetics were calculated in the study. These trapping parameters were determined by different methods such as Chen's peak method, the initial rise method, and Ilich's method. Each characteristic of these outcomes demonstrated that the synthesized Eu3+ -doped CaNa2 (SO4 )2 phosphor had outstanding TL properties and might be valuable for TL dosimetry application.
Asunto(s)
Europio , Mediciones Luminiscentes , Dosimetría Termoluminiscente , Difracción de Rayos XRESUMEN
A BaY2 F8 :Yb3+ ,Ho3+ phosphor was synthesized using a simple precipitation method. The temperature-sensing properties of BaY2 F8 :Yb3+ ,Ho3+ phosphor were investigated using the fluorescence intensity ratio (FIR) of the thermally coupled energy levels (5 F4 and 5 S2 ) of Ho3+ . Energy transitions 5 F4 â5 I8 and 5 S2 â5 I8 gave rise to emission peaks at 538 nm and 549 nm, respectively. The areas under these two emission peaks were used to calculate the FIR. Temperature-dependent upconversion luminescence was recorded in the temperature range 303-623 K using a 980 nm laser excitation source. The results suggested that the BaY2 F8 :Yb3+ , Ho3+ phosphor has the potential to be used as a non-contact optical temperature sensor.
Asunto(s)
Termometría , Iterbio , Bahías , Luminiscencia , TemperaturaRESUMEN
A Eu3+ -activated Ca7 Mg2 (PO4 )6 phosphor was prepared at high temperature (800°C) using a solid-state reaction method. The crystal structure, phase formation of the prepared phosphor was characterized using X-ray diffraction patterns and Fourier transformed infrared analysis. The luminescence properties of the synthesized phosphor were characterized using photoluminescence and thermoluminescence techniques. The prepared phosphor showed two emission peaks at 594 nm with an orange colour due to the 5 D0 â7 F1 transition and at 612 nm a red colour due to the 5 D0 â7 F2 transition under 396 nm near-UV excitation. The prepared phosphors were irradiated with different doses of γ-rays from a 60 Co gamma irradiation source. Thermoluminescence glow curves for this sample phosphor were obtained using a Nucleonix 1009I TL reader. Synthesized phosphor samples were exposed to a 3.6 kGy dose of γ-rays. The thermoluminescence glow curve of the Ca7 Mg2 (PO4 )6 :0.05 mol%Eu3+ phosphor showed maximum intensity at all concentrations of Eu3+ ions. The Ca7 Mg2 (PO4 )6 :0.05 mol%Eu3+ phosphor was irradiated with different doses of 60 Co γ-irradiation and a linear response was observed between 0.6 kGy and 3.6 kGy. Trapping parameters such as activation energy, frequency factor and order of kinetics were calculated. The CIE chromaticity diagram showed the colour coordinates of the synthesized phosphor in the orange and red regions of the visible spectrum; this spectral feature revealed high colour purity and excellent chromaticity coordinate characteristics. Photoluminescence and thermoluminescence properties revealed that the prepared phosphor could be a potential red-emitting phosphor for eco-friendly white light generation and an excellent thermoluminescent dosimeter material for thermoluminescence dosimetric applications.
Asunto(s)
Europio , Luminiscencia , Luz , Dosimetría TermoluminiscenteRESUMEN
Phototherapy is the use of light in the treatment of skin diseases that show improvement upon exposure to natural sunlight or man-made lamps. Artificial phototherapy treatments like Narrow band UVB (NB-UVB) phototherapy, Photochemotherapy by UVA (PUVA) and Targeted phototherapy are safe and widely used for several skin diseases like psoriasis, vitiligo, acne vulgaris, mycosis fungoides etc. Photodynamic therapy (PDT), a specialized phototherapy involves use of efficient photo sensitizers and optical radiations for the treatment of cancer and various other medical maladies. Efficacy of these treatments depends on proper selection of a phototherapy lamp which is decided by the wavelength of light emitted by the luminescent material present in it. These luminescent materials on account of their unique luminescence features of portability, power efficiency, lesser heat generation and durability find widespread application in bioassay and therapy. Here, we have discussed about the potential of various luminescent materials for phototherapy on the basis of their photoluminescence behaviour and also tabulated their application for various dermatoses. A few more luminescent materials are discussed in view of current developments in phototherapy and bioscience.