Effect of different constraining boundary conditions on simulated femoral stresses and strains during gait.

Finite element analysis (FEA) is commonly used in orthopaedic research to estimate localised tissue stresses and strains. A variety of boundary conditions have been proposed for isolated femur analysis, but it remains unclear how these assumed constraints influence FEA predictions of bone biomechanics. This study compared the femoral head deflection (FHD), stresses, and strains elicited under four commonly used boundary conditions (fixed knee, mid-shaft constraint, springs, and isostatic methods) and benchmarked these mechanics against the gold standard inertia relief method for normal and pathological femurs (extreme anteversion and retroversion, coxa vara, and coxa valga). Simulations were performed for the stance phase of walking with the applied femoral loading determined from patient-specific neuromusculoskeletal models. Due to unrealistic biomechanics observed for the commonly used boundary conditions, we propose a novel biomechanical constraint method to generate physiological femur biomechanics. The biomechanical method yielded FHD (< 1 mm), strains (approaching 1000 µÎµ), and stresses (< 60 MPa), which were consistent with physiological observations and similar to predictions from the inertia relief method (average coefficient of determination = 0.97, average normalized root mean square error = 0.17). Our results highlight the superior performance of the biomechanical method compared to current methods of constraint for  both healthy and pathological femurs.

Joint contact forces during semi-recumbent seated cycling.

Semi-recumbent cycling performed from a wheelchair is a popular rehabilitation exercise following spinal cord injury (SCI) and is often paired with functional electrical stimulation. However, biomechanical assessment of this cycling modality is lacking, even in unimpaired populations, hindering the development of personalised and safe rehabilitation programs for those with SCI. This study developed a computational pipeline to determine lower limb kinematics, kinetics, and joint contact forces (JCF) in 11 unimpaired participants during voluntary semi-recumbent cycling using a rehabilitation ergometer. Two cadences (40 and 60 revolutions per minute) and three crank powers (15 W, 30 W, and 45 W) were assessed. A rigid body model of a rehabilitation ergometer was combined with a calibrated electromyogram-informed neuromusculoskeletal model to determine JCF at the hip, knee, and ankle. Joint excursions remained consistent across all cadence and powers, but joint moments and JCF differed between 40 and 60 revolutions per minute, with peak JCF force significantly greater at 40 compared to 60 revolutions per minute for all crank powers. Poor correlations were found between mean crank power and peak JCF across all joints. This study provides foundation data and computational methods to enable further evaluation and optimisation of semi-recumbent cycling for application in rehabilitation after SCI and other neurological disorders.

Muscle synergy-informed neuromusculoskeletal modelling to estimate knee contact forces in children with cerebral palsy.

Cerebral palsy (CP) includes a group of neurological conditions caused by damage to the developing brain, resulting in maladaptive alterations of muscle coordination and movement. Estimates of joint moments and contact forces during locomotion are important to establish the trajectory of disease progression and plan appropriate surgical interventions in children with CP. Joint moments and contact forces can be estimated using electromyogram (EMG)-informed neuromusculoskeletal models, but a reduced number of EMG sensors would facilitate translation of these computational methods to clinics. This study developed and evaluated a muscle synergy-informed neuromusculoskeletal modelling approach using EMG recordings from three to four muscles to estimate joint moments and knee contact forces of children with CP and typically developing (TD) children during walking. Using only three to four experimental EMG sensors attached to a single leg and leveraging an EMG database of walking data of TD children, the synergy-informed approach estimated total knee contact forces comparable to those estimated by EMG-assisted approaches that used 13 EMG sensors (children with CP, n = 3, R2 = 0.95 ± 0.01, RMSE = 0.40 ± 0.14 BW; TD controls, n = 3, R2 = 0.93 ± 0.07, RMSE = 0.19 ± 0.05 BW). The proposed synergy-informed neuromusculoskeletal modelling approach could enable rapid evaluation of joint biomechanics in children with unimpaired and impaired motor control within a clinical environment.

Hip contact forces can be predicted with a neural network using only synthesised key points and electromyography in people with hip osteoarthritis.

OBJECTIVE: To develop and validate a neural network to estimate hip contact forces (HCF), and lower body kinematics and kinetics during walking in individuals with hip osteoarthritis (OA) using synthesised anatomical key points and electromyography. To assess the capability of the neural network to detect directional changes in HCF resulting from prescribed gait modifications. DESIGN: A calibrated electromyography-informed neuromusculoskeletal model was used to compute lower body joint angles, moments, and HCF for 17 participants with mild-to-moderate hip OA. Anatomical key points (e.g., joint centres) were synthesised from marker trajectories and augmented with bias and noise expected from computer vision-based pose estimation systems. Temporal convolutional and long short-term memory neural networks (NN) were trained using leave-one-subject-out validation to predict neuromusculoskeletal modelling outputs from the synthesised key points and measured electromyography data from 5 hip-spanning muscles. RESULTS: HCF was predicted with an average error of 13.4 ± 7.1% of peak force. Joint angles and moments were predicted with an average root-mean-square-error of 5.3 degrees and 0.10 Nm/kg, respectively. The NN could detect changes in peak HCF that occur due to gait modifications with good agreement with neuromusculoskeletal modelling (r2 = 0.72) and a minimum detectable change of 9.5%. CONCLUSION: The developed neural network predicted HCF and lower body joint angles and moments in individuals with hip OA using noisy synthesised key point locations with acceptable errors. Changes in HCF magnitude due to gait modifications were predicted with high accuracy. These findings have important implications for implementation of load-modification based gait retraining interventions for people with hip OA in a natural environment (i.e., home, clinic).

Moment arm and torque generating capacity of semitendinosus following tendon harvesting for anterior cruciate ligament reconstruction: A simulation study.

Altered semitendinosus (ST) morphology and distal tendon insertion following anterior cruciate ligament reconstruction (ACLR) may reduce knee flexion torque generating capacity of the hamstrings via impaired ST force generation and/or moment arm. This study used a computational musculoskeletal model to simulate mechanical consequences of tendon harvest for ACLR on ST function by modeling changes in ST muscle tendon insertion point, moment arm, and torque generating capacity across a physiological range of motion. Simulated ST function was then compared between ACLR and uninjured contralateral limbs. Magnetic resonance imaging from 18 individuals with unilateral history of ACLR involving a hamstring autograft was used to analyse bilateral hamstring muscle (ST, semimembranosus, bicep femoris long head and short head) morphology and distal ST tendon insertion. The ACLR cohort was sub-grouped into those with and without ST regeneration. For each participant with ST regeneration (n = 7), a personalized musculoskeletal model was created including postoperative remodeling of ST using OpenSim 4.1. Knee flexion and internal rotation moment arms and torque generating capacities of hamstrings were evaluated. Bilateral differences were calculated with an asymmetry index (%) ([unaffected limb-affected limb]/[unaffected limb + affected limb]*100%). Smaller moment arms or knee torques within injured compared to uninjured contralateral limbs were considered a deficit. Compared to uninjured contralateral limbs, ACLR limbs with tendon regeneration (n = 7) had minor reductions in knee flexion (5.80% [95% confidence interval (CI) = 3.97-7.62]) and internal rotation (4.92% [95% CI = 2.77-7.07]) moment arms. Decoupled from muscle morphology, altered ST moment arms in ACLR limbs with tendon regeneration resulted in negligible deficits in knee flexion (1.20% [95% CI = 0.34-2.06]) and internal rotation (0.24% [95% CI = 0.22-0.26]) torque generating capacity compared to uninjured contralateral limbs. Coupled with muscle morphology, ACLR limbs with tendon regeneration had substantial deficits in knee flexion (19.32% [95% CI = 18.35-20.28]) and internal rotation (15.49% [95% CI = 14.56-16.41]) torques compared to uninjured contralateral limbs. Personalized musculoskeletal models with measures of ST distal insertion and muscle morphology provided unique insights into post-ACLR ST and hamstring function. Deficits in knee flexor and internal rotation moment arms and torque generating capacities were evident in those with ACLR even when tendon regeneration occurred. Future studies may wish to implement this framework in personalized musculoskeletal models following ACLR to better understand individual muscle function for injury prevention and treatment evaluation.

Muscle Morphology Does Not Solely Determine Knee Flexion Weakness After Anterior Cruciate Ligament Reconstruction with a Semitendinosus Tendon Graft: A Combined Experimental and Computational Modeling Study.

The distal semitendinosus tendon is commonly harvested for anterior cruciate ligament reconstruction, inducing substantial morbidity at the knee. The aim of this study was to probe how morphological changes of the semitendinosus muscle after harvest of its distal tendon for anterior cruciate ligament reconstruction affects knee flexion strength and whether the knee flexor synergists can compensate for the knee flexion weakness. Ten participants 8-18 months after anterior cruciate ligament reconstruction with an ipsilateral distal semitendinosus tendon autograft performed isometric knee flexion strength testing (15°, 45°, 60°, and 90°; 0° = knee extension) positioned prone on an isokinetic dynamometer. Morphological parameters extracted from magnetic resonance images were used to inform a musculoskeletal model. Knee flexion moments estimated by the model were then compared with those measured experimentally at each knee angle position. A statistically significant between-leg difference in experimentally-measured maximal isometric strength was found at 60° and 90°, but not 15° or 45°, of knee flexion. The musculoskeletal model matched the between-leg differences observed in experimental knee flexion moments at 15° and 45° but did not well estimate between-leg differences with a more flexed knee, particularly at 90°. Further, the knee flexor synergists could not physiologically compensate for weakness in deep knee flexion. These results suggest additional factors other than knee flexor muscle morphology play a role in knee flexion weakness following anterior cruciate ligament reconstruction with a distal semitendinosus tendon graft and thus more work at neural and microscopic levels is required for informing treatment and rehabilitation in this demographic.

Sagittal plane knee kinematics can be measured during activities of daily living following total knee arthroplasty with two IMU.

Knee function is rarely measured objectively during functional tasks following total knee arthroplasty. Inertial measurement units (IMU) can measure knee kinematics and range of motion (ROM) during dynamic activities and offer an easy-to-use system for knee function assessment post total knee arthroplasty. However, IMU must be validated against gold standard three-dimensional optical motion capture systems (OMC) across a range of tasks if they are to see widespread uptake. We computed knee rotations and ROM from commercial IMU sensor measurements during walking, squatting, sit-to-stand, stair ascent, and stair descent in 21 patients one-year post total knee arthroplasty using two methods: direct computation using segment orientations (r_IMU), and an IMU-driven iCloud-based interactive lower limb model (m_IMU). This cross-sectional study compared computed knee angles and ROM to a gold-standard OMC and inverse kinematics method using Pearson's correlation coefficient (R) and root-mean-square-differences (RMSD). The r_IMU and m_IMU methods estimated sagittal plane knee angles with excellent correlation (>0.95) compared to OMC for walking, squatting, sit-to-stand, and stair-ascent, and very good correlation (>0.90) for stair descent. For squatting, sit-to-stand, and walking, the mean RMSD for r_IMU and m_IMU compared to OMC were <4 degrees, < 5 degrees, and <6 degrees, respectively but higher for stair ascent and descent (~12 degrees). Frontal and transverse plane knee kinematics estimated using r_IMU and m_IMU showed poor to moderate correlation compared to OMC. There were no differences in ROM measurements during squatting, sit-to-stand, and walking across the two methods. Thus, IMUs can measure sagittal plane knee angles and ROM with high accuracy for a variety of tasks and may be a useful in-clinic tool for objective assessment of knee function following total knee arthroplasty.

Osteoarthritis year in review 2023: Biomechanics.

Biomechanics plays a significant yet complex role in osteoarthritis (OA) onset and progression. Identifying alterations in biomechanical factors and their complex interactions is critical for gaining new insights into OA pathophysiology and identification of clearly defined and modifiable mechanical treatment targets. This review synthesized biomechanics studies from March 2022 to April 2023, from which three themes relating to human gait emerged: (1) new insights into the pathogenesis of OA using computational modeling and machine learning, (2) technology-enhanced biomechanical interventions for OA, and (3) out-of-lab biomechanical assessments of OA. We further highlighted future-focused areas which may continue to advance the field of biomechanics in OA, with a particular emphasis on exploiting technology to understand and treat biomechanical mechanisms of OA outside the laboratory. The breadth of studies included in this review highlights the complex role of biomechanics in OA and showcase numerous innovative and outstanding contributions to the field. Exciting cross-disciplinary efforts integrating computational modeling, mobile sensors, and machine learning methods show great promise for streamlining in vivo multi-scale biomechanics workflows and are expected to underpin future breakthroughs in the understanding and treatment of biomechanics in OA.

Vertical Jump Testing after Anterior Cruciate Ligament Reconstruction: A Systematic Review and Meta-analysis.

INTRODUCTION: Recently, there has been a call for vertical jump testing via force-plate analysis to be included in the assessment of individuals after anterior cruciate ligament reconstruction (ACLR) and as part of return-to-play criteria. However, a synthesis of current literature is needed to help guide clinicians on what tests to perform, which force-plate metrics to assess, and how these may change over the time course of rehabilitation. METHODS: Four online databases were searched from inception to July 2022. The Downs and Black checklist was used to assess study quality. Multilevel meta-analyses and meta-regressions were undertaken in conjunction with a best evidence synthesis. RESULTS: Forty-two articles were included, capturing 2375 participants with a history of ACLR. Reconstructed limbs displayed 1) lower peak eccentric forces, concentric forces, landing forces, and lower eccentric and concentric impulses (standardized means difference [SMD] = -1.84 to -0.46) than uninjured contralateral limbs during bilateral countermovement jumps (CMJ) and drop vertical jumps (DVJ); 2) lower jump heights and reactive strength indices (RSI), and longer contact times than uninjured contralateral limbs during unilateral CMJ and DVJ (SMD = -0.86 to 0.26); and 3) lower jump heights, RSI, and longer contact times during bilateral and unilateral CMJ, and unilateral DVJ, than uninjured controls (SMD = -1.19 to 1.08). Meta-regression revealed that time postsurgery was a significant moderator ( P < 0.05) for 1) bilateral CMJ height, peak concentric force, and peak landing force; 2) between-limb differences in unilateral CMJ height; and 3) differences in unilateral DVJ height, RSI, and contact time between reconstructed limbs and healthy controls with no history of injury. CONCLUSIONS: Individuals with a history of ACLR display chronic deficits in vertical jumping performance during a range of bilateral and unilateral tasks, which may have implications for return-to-play criteria and the design of interventions targeted at restoring long-term deficits in explosive lower limb strength after ACLR.

Hip Contact Forces During Sprinting in Femoroacetabular Impingement Syndrome.

PURPOSE: Sprinting often provokes hip pain in individuals with femoroacetabular impingement syndrome (FAIS). Asphericity of the femoral head-neck junction (cam morphology) characteristic of FAIS can increase the risk of anterior-superior acetabular cartilage damage. This study aimed to 1) compare hip contact forces (magnitude and direction) during sprinting between individuals with FAIS, asymptomatic cam morphology (CAM), and controls without cam morphology, and 2) identify the phases of sprinting with high levels of anteriorly directed hip contact forces. METHODS: Forty-six recreationally active individuals with comparable levels of physical activity were divided into three groups (FAIS, 14; CAM, 15; control, 17) based on their history of hip/groin pain, results of clinical impingement tests, and presence of cam morphology (alpha angle >55°). Three-dimensional marker trajectories, ground reaction forces, and electromyograms from 12 lower-limb muscles were recorded during 10-m overground sprinting trials. A linearly scaled electromyogram-informed neuromusculoskeletal model was used to calculate hip contact force magnitude (resultant, anterior-posterior, inferior-superior, medio-lateral) and angle (sagittal and frontal planes). Between-group comparisons were made using two-sample t -tests via statistical parametric mapping ( P < 0.05). RESULTS: No significant differences in magnitude or direction of hip contact forces were observed between FAIS and CAM or between FAIS and control groups during any phase of the sprint cycle. The highest anteriorly directed hip contact forces were observed during the initial swing phase of the sprint cycle. CONCLUSIONS: Hip contact forces during sprinting do not differentiate recreationally active individuals with FAIS from asymptomatic individuals with and without cam morphology. Hip loading during early swing, where peak anterior loading occurs, may be a potential mechanism for cartilage damage during sprinting-related sports in individuals with FAIS and/or asymptomatic cam morphology.

The Biomechanics Research and Innovation Challenge: Development, Implementation, Uptake, and Reflections on the Inaugural Program.

Biomechanics as a discipline is ideally placed to increase awareness and participation of girls and women in science, technology, engineering, and mathematics. A nationwide Biomechanics and Research Innovation Challenge (BRInC) centered on mentoring and role modeling was developed to engage high school girls (mentees) and early-mid-career women (mentors) in the field of biomechanics through the completion of a 100-day research and/or innovation project. This manuscript describes the development, implementation, and uptake of the inaugural BRInC program and synthesizes the research and innovation projects undertaken, providing a framework for adoption of this program within the global biomechanics community. Eighty-seven high school girls in years 9 and 10 (age range: 14-16 y) were mentored in teams (n = 17) by women in biomechanics (n = 24). Using a design thinking approach, teams generated solutions to biomechanics-based problem(s)/research question(s). Eight key reflections on program strengths, as well as areas for improvement and planned changes for future iterations of the BRInC program, are outlined. These key reflections highlight the innovation, impact, and scalability of the program; the importance of a program framework and effective communication tools; and implementation of strategies to sustain the program as well as the importance of diversity and building a sense of community.

Injury Prevention Programmes Fail to Change Most Lower Limb Kinematics and Kinetics in Female Team Field and Court Sports: A Systematic Review and Meta-Analysis of Randomised Controlled Trials.

BACKGROUND: One mechanism by which exercise interventions may be effective in reducing anterior cruciate ligament (ACL) injury risk is through changes in lower limb biomechanics. Understanding how training programmes affect lower-limb kinematics and kinetics may help refine injury prevention programmes. OBJECTIVE: The aim of this systematic review and meta-analysis was to assess the effect of injury prevention programmes on kinematics and kinetics during tasks related to ACL injury in female team field and court sports. DATA SOURCES: Five databases were searched in October 2022. ELIGIBILITY CRITERIA: Randomised controlled trials assessing the effect of injury prevention programmes compared with usual training/no training on lower limb kinematics and kinetics in female team field and court sports were eligible for review. RESULTS: Sixteen studies were included. A total of 976 female athletes were included. Most of the studies included interventions with multiple components (12/16). Commonly used components were plyometrics (12/16), strength (8/16), and balance/stability (7/16). Thirteen studies had routine training or sham interventions as the control group and three studies had no training. Very low certainty evidence suggests that injury prevention programmes increase knee flexion angles (mean difference = 3.1° [95% confidence interval 0.8-5.5]); however, very low to low certainty evidence suggests no effect on hip flexion angles/moments, knee flexion moments, hip adduction angles/moments, knee adduction angles/moments, hip internal rotation angles/moments, ankle dorsiflexion angles, and ground reaction forces, compared with usual training/no training. CONCLUSION: Injury prevention programmes may be effective in increasing knee flexion angles during dynamic landing and cutting tasks but may have no effect on other lower limb biomechanical variables. As such, the benefits of injury prevention programmes may be mediated by factors other than altered biomechanics and/or may happen through other biomechanical measures not included in this review.

Detour or New Direction: The Impact of the COVID-19 Pandemic on the Professional Identity Formation of Postgraduate Residents.

PURPOSE: The COVID-19 pandemic has resulted in numerous disruptions to health professions education training programs. Much attention has been given to the impact of these disruptions on formal learning opportunities in training; however, little attention has been given to the impact on professional socialization and professional identity formation. This study explored the impact of the pandemic and resultant curricular changes on the professional identity of family medicine residents. METHOD: 23 family medicine residents at the University of Toronto were interviewed between September 2020 and September 2022. Using symbolic interactionism as a theoretical framework, thematic analysis explored the meanings residents attributed to both experiences that were disrupted due to the pandemic, and new experiences that resulted from these disruptions. RESULTS: Participant responses reflected that disruptions in training did not always align with their expectations for family medicine and plans for future practice; however, these new experiences also reinforced their understanding of what it means to be a family physician. While participants felt the pandemic represented a loss of agency and negatively impacted relationships in their training program, it also provided a sense of belonging and membership in their profession. Finally, these new experiences continually blurred the line between professional and personal identities through the impact of the pandemic on participants' sense of well-being and safety. CONCLUSIONS: The impact of the pandemic on training experiences extends beyond the loss of formal learning opportunities. Participant responses reflect the collective influence of the formal, informal, and hidden curriculum on the professional socialization and professional identity formation of residents-and how these different curricular influences were disrupted due to the pandemic. These training experiences have important implications for the future practice of residents who completed their training during the pandemic and highlight the role of training programs in supporting the professional identity formation of residents.

A Digital Twin Framework for Precision Neuromusculoskeletal Health Care: Extension Upon Industrial Standards.

There is a powerful global trend toward deeper integration of digital twins into modern life driven by Industry 4.0 and 5.0. Defense, agriculture, engineering, manufacturing, and urban planning sectors have thoroughly incorporated digital twins to great benefit across their respective product lifecycles. Despite clear benefits, a digital twin framework for health and medical sectors is yet to emerge. This paper proposes a digital twin framework for precision neuromusculoskeletal health care. We build upon the International Standards Organization framework for digital twins for manufacturing by presenting best available computational models within a digital twin framework for clinical application. We map a use case for modeling Achilles tendon mechanobiology, highlighting how current modeling practices align with our proposed digital twin framework. Similarly, we map a use case for advanced neurorehabilitation technology, highlighting the role of a digital twin in control of systems where human and machine are interfaced. Future work must now focus on creating an informatic representation to govern how digital data are passed to, from, and within the digital twin, as well as specific standards to declare which measurement systems and modeling methods are acceptable to move toward widespread use of the digital twin framework for precision neuromusculoskeletal health care.

Individual muscle contributions to the acceleration of the centre of mass during gait in people with mild-to-moderate hip osteoarthritis.

BACKGROUND: People with mild-to-moderate hip osteoarthritis (OA) exhibit hip muscle weakness, alterations in hip kinematics and kinetics and hip contact forces during gait compared to healthy controls. However, it is unclear if those with hip OA use different motor control strategies to coordinate the motion of the centre of mass (COM) during gait. Such information could provide further critical assessment of conservative management strategies implemented for people with hip OA. RESEARCH QUESTION: Do muscle contributions to the acceleration of the COM during walking differ between individuals with mild-to-moderate hip OA and controls? METHODS: Eleven individuals with mild-to-moderate hip OA and 10 healthy controls walked at a self-selected speed while whole-body motion and ground reaction forces were measured. Muscle forces during gait were obtained using static optimisation and an induced acceleration analysis was performed to determine individual muscle contributions to the acceleration of the COM during single-leg stance (SLS). Between-group comparisons were made using independent t-tests via Statistical Parametric Modelling. RESULTS: There were no between-group differences in spatial-temporal gait parameters or three-dimensional whole-body COM acceleration. The rectus femoris, biceps femoris, iliopsoas and gastrocnemius muscles in the hip OA group contributed less to the fore-aft accelerations of the COM (p < 0.05), and more to the vertical COM acceleration with the gluteus maximus (p < 0.05), during SLS, compared to the control group. SIGNIFICANCE: Subtle differences exist in the way people with mild-to-moderate hip OA use their muscles to accelerate the whole-body centre of mass during the SLS phase of walking relative to healthy controls. These findings improve understanding of the complex functional consequences of hip OA and enhance our understanding of how to monitor the effectiveness of an intervention on biomechanical changes in gait in people with hip OA.

Maintaining soldier musculoskeletal health using personalised digital humans, wearables and/or computer vision.

OBJECTIVES: The physical demands of military service place soldiers at risk of musculoskeletal injuries and are major concerns for military capability. This paper outlines the development new training technologies to prevent and manage these injuries. DESIGN: Narrative review. METHODS: Technologies suitable for integration into next-generation training devices were examined. We considered the capability of technologies to target tissue level mechanics, provide appropriate real-time feedback, and their useability in-the-field. RESULTS: Musculoskeletal tissues' health depends on their functional mechanical environment experienced in military activities, training and rehabilitation. These environments result from the interactions between tissue motion, loading, biology, and morphology. Maintaining health of and/or repairing joint tissues requires targeting the "ideal" in vivo tissue mechanics (i.e., loading and strain), which may be enabled by real-time biofeedback. Recent research has shown that these biofeedback technologies are possible by integrating a patient's personalised digital twin and wireless wearable devices. Personalised digital twins are personalised neuromusculoskeletal rigid body and finite element models that work in real-time by code optimisation and artificial intelligence. Model personalisation is crucial in obtaining physically and physiologically valid predictions. CONCLUSIONS: Recent work has shown that laboratory-quality biomechanical measurements and modelling can be performed outside the laboratory with a small number of wearable sensors or computer vision methods. The next stage is to combine these technologies into well-designed easy to use products.

Morphology of proximal and distal human semitendinosus compartments and the effects of distal tendon harvesting for anterior cruciate ligament reconstruction.

The human semitendinosus muscle is characterized by a tendinous inscription separating proximal and distal neuromuscular compartments. As each compartment is innervated by separate nerve branches, potential exists for independent operation and control of compartments. However, the morphology and function of each compartment have not been thoroughly examined in an adult human population. Further, the distal semitendinosus tendon is typically harvested for use in anterior cruciate ligament reconstruction surgery, which induces long-term morphological changes to the semitendinosus muscle-tendon unit. It remains unknown if muscle morphological alterations following anterior cruciate ligament reconstruction are uniform between proximal and distal semitendinosus compartments. Here, we performed magnetic resonance imaging on 10 individuals who had undergone anterior cruciate ligament reconstruction involving an ipsilateral distal semitendinosus tendon graft 14 ± 4 months prior, extracting morphological parameters of the whole semitendinosus muscle and each individual compartment from both the (non-injured) contralateral and surgical legs. In the contralateral leg, volume and length of the proximal compartment were smaller than the distal compartment. No between-compartment differences in volume or length were found for anterior cruciate ligament reconstructed legs, likely due to greater shortening of the distal compared to the proximal compartment after anterior cruciate ligament reconstruction. The maximal anatomical cross-sectional area of both compartments was substantially smaller on the anterior cruciate ligament reconstructed leg but did not differ between compartments on either leg. The absolute and relative between-leg differences in proximal compartment morphology on the anterior cruciate ligament reconstructed leg were strongly correlated with the corresponding between-leg differences in distal compartment morphological parameters. Specifically, greater between-leg morphological differences in one compartment were highly correlated with large between-leg differences in the other compartment, and vice versa for smaller differences. These relationships indicate that despite the heterogeneity in compartment length and volume, compartment atrophy is not independent or random. Further, the tendinous inscription endpoints were generally positioned at the same proximodistal level as the compartment maximal anatomical cross-sectional areas, providing a wide area over which the tendinous inscription could mechanically interact with compartments. Overall, results suggest the two human semitendinosus compartments are not mechanically independent.

Impact of early waves of the COVID-19 pandemic on family medicine residency training: Analysis of survey data.

OBJECTIVE: To identify how graduating and incoming family medicine residents (FMR) experienced changes to their education during the early waves of the COVID-19 pandemic. DESIGN: The Family Medicine Longitudinal Survey was modified with questions related to the impact of COVID-19 on FMR and their training. Short-answer responses underwent thematic analysis. Responses to Likert scale and multiple-choice questions were reported as summary statistics. SETTING: Department of Family and Community Medicine at the University of Toronto in Ontario. PARTICIPANTS: Graduating FMR in spring 2020 and incoming FMR in fall 2020. MAIN OUTCOME MEASURES: Residents' perceptions of the impact of COVID-19 on clinical skills acquisition and preparedness for practice. RESULTS: Surveys response rates were 124 of 167 (74%) and 142 of 162 (88%) for graduating and incoming residents, respectively. Important themes for both cohorts included reduced access to clinical environments, reduced patient volumes, and lack of exposure to procedural skills. While the graduating cohort indicated they felt confident to begin practising family medicine, they described being impacted by the loss of a tailored learning environment, including canceled or altered electives. In contrast, incoming residents reported the loss of core skills, such as physical examination competency, as well as the loss of face-to-face communication, rapport, and relationship-building opportunities. However, both cohorts endorsed gaining new skills during the pandemic, including conducting telemedicine appointments, pandemic planning, and interfacing with public health. CONCLUSION: Based on these results, residency programs can specifically tailor solutions and modifications to address common themes across cohorts to facilitate optimal learning environments in pandemic times.