Calcium pyruvate in the attenuation of the water deficit on the agro-industrial quality of ratoon sugarcane.

Sugarcane is one of the largest agricultural commodities when considering the export volume and the number of jobs generated. Sugarcane production in the Brazilian Northeast region is generally low due to several factors, including the irregular rainfall distribution, which highlights the importance of studies aimed at mitigating the deleterious effects of water stress. In this scenario, this study aimed to evaluate calcium pyruvate as a water deficit attenuator on the agro-industrial quality of sugarcane in the second cycle of cultivation. The experiment was conducted out under greenhouse conditions of the Federal University of Campina Grande, where five sugarcane commercial genotypes tested (G1- RB863129, G2- RB92579, G3- RB962962, G4- RB021754, and G5- RB041443) and three irrigation management strategies (E1- full irrigation, E2- water deficit with application of 30 mM of calcium pyruvate, and E3- water deficit without calcium pyruvate application), distributed in randomized blocks in 5 × 3 factorial arrangement with three replications. The RB021754 genotype under water deficit and without foliar application of calcium pyruvate increased the fiber content (13.2%) and the sugarcane moist cake weight (143.5 g). The effects of water deficit in sugarcane genotypes are attenuated by the exogenous application of 30 mM of calcium pyruvate, with benefits on the polarized sucrose content, apparent sucrose content of the juice, soluble solids content, purity, corrected cane POL, total recoverable sugars, and stem mass in relation to plants under water deficit without calcium pyruvate application.

Pyruvic acid as attenuator of water deficit in cotton plants varying the phenological stage.

The lack of water during crop growth causes damage to any production system, especially when it occurs during the initial establishment or beginning of the reproductive stage. Although cotton can be properly managed in regions with water limitation, its yield is affected at different levels according to the genetics of the cultivar adopted. Exogenous application of some organic components has shown a stress-mitigating effect and can be a valuable procedure to enhance the yield of water stress-sensitive cultivars. The objective of this work was to evaluate the benefits of exogenous application of pyruvic acid (100 µM) in cotton plants under water deficit varying the phenological stage of the crop. The experiment was conducted in a greenhouse, where the plants were grown in pots and subjected to seven days of water suspension, initiated individually in stages V2 and B1. Each pot contained two plants. The treatments adopted were: T1 - control, T2 - water suppression; and T3 - water suppression + pyruvate application. The design was randomized blocks in a factorial scheme (3 × 3) with three replicates. The reductions in gas exchange and growth of the cultivars BRS Seridó, CNPA 7MH and FM 966 were more significant in the reproductive stage, especially for FM 966, which was more sensitive. Pyruvate application reduced the effects of water suppression on boll production by 31% in BRS Seridó and 34% in CNPA 7MH and FM 966.

Mineral composition and production of guava under salt stress and salicylic acid.

The limitation in the quality of water sources for irrigation in the semi-arid region of northeastern Brazil is increasingly present, so it is necessary to use water with high concentrations of salts for agricultural production, which makes the use of elicitors essential to mitigate the harmful effects of salinity on plants. Given the above, the objective of this study was to evaluate the effects of foliar application of salicylic acid on the mineral composition and production of guava plants under salt stress conditions in the post-grafting phase. The experiment was carried out under greenhouse conditions, in a randomized block design, in a 2 × 4 factorial scheme, with two levels of electrical conductivity of irrigation water (0.6 and 3.2 dS m-1) and four concentrations of salicylic acid (0, 1.2, 2.4, and 3.6 mM), with three replicates. During the flowering stage of guava, N, P, and K contents accumulated in the leaves according to the following order of concentration: N > K > P. Foliar application of 1.2 mM of salicylic acid increases the leaf contents of N, P, and K in guava plants grown under irrigation with water of 0.6 dS m-1. Water salinity of 3.2 dS m-1 reduces the growth and production components of guava plants.

Pyruvic acid as attenuator of water deficit in cotton plants varying the phenological stage / Ácido pirúvico como atenuante do déficit hídrico em algodoeiros variando a fase fenológica

The lack of water during crop growth causes damage to any production system, especially when it occurs during the initial establishment or beginning of the reproductive stage. Although cotton can be properly managed in regions with water limitation, its yield is affected at different levels according to the genetics of the cultivar adopted. Exogenous application of some organic components has shown a stress-mitigating effect and can be a valuable procedure to enhance the yield of water stress-sensitive cultivars. The objective of this work was to evaluate the benefits of exogenous application of pyruvic acid (100 µM) in cotton plants under water deficit varying the phenological stage of the crop. The experiment was conducted in a greenhouse, where the plants were grown in pots and subjected to seven days of water suspension, initiated individually in stages V2 and B1. Each pot contained two plants. The treatments adopted were: T1 - control, T2 - water suppression; and T3 - water suppression + pyruvate application. The design was randomized blocks in a factorial scheme (3 × 3) with three replicates. The reductions in gas exchange and growth of the cultivars BRS Seridó, CNPA 7MH and FM 966 were more significant in the reproductive stage, especially for FM 966, which was more sensitive. Pyruvate application reduced the effects of water suppression on boll production by 31% in BRS Seridó and 34% in CNPA 7MH and FM 966.

A falta d'água durante o crescimento da cultura traz prejuízos em qualquer sistema de produção, especialmente quando ocorre durante o estabelecimento inicial ou início da fase reprodutiva. O algodoeiro, apesar de ter larga habilidade para manejo em regiões com limitação hídrica, tem o rendimento afetado, com níveis diferenciados em função da genética do cultivar adotado. A aplicação exógena de alguns componentes orgânicos tem demonstrado efeito mitigador do estresse podendo ser um aditivo valioso para impulsionar a produtividade de cultivares sensíveis ao estresse hídrico. Neste trabalho, objetivou-se avaliar os benefícios da aplicação exógena de ácido pirúvico (100 µM) em algodoeiros sob déficit hídrico variando a fase fenológica da cultura. O ensaio foi conduzido em casa de vegetação, onde as plantas foram cultivadas em vasos e submetidas a sete dias de suspensão hídrica, iniciadas, individualmente, nas fases V2 e B1. Cada vaso conteve duas plantas. Os tratamentos adotados foram: T1- controle, T2 - supressão hídrica; T3- supressão hídrica + aplicação de piruvato. O delineamento foi em blocos casualizados em esquema fatorial (3 × 3) com três repetições. Foi observado que as reduções nas trocas gasosas e crescimento das cultivares BRS Seridó, CNPA 7MH e FM 966 foram mais expressivas na fase reprodutiva, especialmente da última que se mostrou mais sensível. A aplicação de piruvato mitigou os efeitos da supressão hídrica sobre a produção de capulhos 31% na BRS Seridó e 34% em CNPA 7MH e FM 966.

Mineral composition and production of guava under salt stress and salicylic acid / Composição mineral e produção de goiabeira sob estresse salino e ácido salicílico

The limitation in the quality of water sources for irrigation in the semi-arid region of northeastern Brazil is increasingly present, so it is necessary to use water with high concentrations of salts for agricultural production, which makes the use of elicitors essential to mitigate the harmful effects of salinity on plants. Given the above, the objective of this study was to evaluate the effects of foliar application of salicylic acid on the mineral composition and production of guava plants under salt stress conditions in the post-grafting phase. The experiment was carried out under greenhouse conditions, in a randomized block design, in a 2 × 4 factorial scheme, with two levels of electrical conductivity of irrigation water (0.6 and 3.2 dS m-1) and four concentrations of salicylic acid (0, 1.2, 2.4, and 3.6 mM), with three replicates. During the flowering stage of guava, N, P, and K contents accumulated in the leaves according to the following order of concentration: N > K > P. Foliar application of 1.2 mM of salicylic acid increases the leaf contents of N, P, and K in guava plants grown under irrigation with water of 0.6 dS m-1. Water salinity of 3.2 dS m-1 reduces the growth and production components of guava plants.

A limitação na qualidade das fontes hídricas para irrigação na região semiárida do Nordeste é cada vez mais presente, tornando-se necessário o uso de águas com altas concentrações de sais para produção agrícola, o que torna indispensável à utilização de elicitores para atenuar os efeitos deletérios da salinidade sobre as plantas. Diante do exposto, objetivou-se com esse trabalho avaliar os efeitos da aplicação foliar de ácido salicílico na composição mineral e na produção de plantas de goiabeira sob condições de estresse salino na fase pós-enxertia. O experimento foi conduzido em casa de vegetação, no delineamento experimental de blocos casualizados, em esquema fatorial 2 × 4, sendo dois níveis de condutividade elétrica da água de irrigação (0,6 e 3,2 dS m-1) e quatro concentrações de ácido salicílico (0; 1,2; 2,4 e 3,6 mM), com três repetições. Durante a fase de floração da goiabeira, os teores de N, P, K, se acumularam nas folhas segundo a ordem de concentração N > K > P. A aplicação foliar de 1,2 mM de ácido salicílico aumentou os teores foliares de nitrogênio, fósforo e potássio nas plantas de goiabeira cultivadas sob irrigação com água de 0,6 dS m-1. A salinidade da água de 3,2 dS m-1 diminuiu o crescimento e os componentes de produção das plantas de goiabeira.

Calcium pyruvate in the attenuation of the water deficit on the agro-industrial quality of ratoon sugarcane / Piruvato de cálcio na atenuação do déficit hídrico sobre a qualidade agroindustrial de cana soca

Abstract Sugarcane is one of the largest agricultural commodities when considering the export volume and the number of jobs generated. Sugarcane production in the Brazilian Northeast region is generally low due to several factors, including the irregular rainfall distribution, which highlights the importance of studies aimed at mitigating the deleterious effects of water stress. In this scenario, this study aimed to evaluate calcium pyruvate as a water deficit attenuator on the agro-industrial quality of sugarcane in the second cycle of cultivation. The experiment was conducted out under greenhouse conditions of the Federal University of Campina Grande, where five sugarcane commercial genotypes tested (G1- RB863129, G2- RB92579, G3- RB962962, G4- RB021754, and G5- RB041443) and three irrigation management strategies (E1- full irrigation, E2- water deficit with application of 30 mM of calcium pyruvate, and E3- water deficit without calcium pyruvate application), distributed in randomized blocks in 5 × 3 factorial arrangement with three replications. The RB021754 genotype under water deficit and without foliar application of calcium pyruvate increased the fiber content (13.2%) and the sugarcane moist cake weight (143.5 g). The effects of water deficit in sugarcane genotypes are attenuated by the exogenous application of 30 mM of calcium pyruvate, with benefits on the polarized sucrose content, apparent sucrose content of the juice, soluble solids content, purity, corrected cane POL, total recoverable sugars, and stem mass in relation to plants under water deficit without calcium pyruvate application.

Resumo A cana-de-açúcar é uma das maiores commodities agrícolas, quando se considera o volume de exportação e o número de empregos gerados. A produção no Nordeste brasileiro, em geral, é baixa, decorrente de diversos fatores, entre eles, a irregularidade de distribuição das chuvas, o que realça a importância de estudos com vistas a minorar os efeitos deletérios do estresse hídrico. Nesse cenário, objetivou-se avaliar o piruvato de cálcio como atenuante do déficit hídrico sobre a qualidade agroindustrial da cana-de-açúcar no segundo ciclo de cultivo. O experimento foi conduzido em casa de vegetação da Universidade Federal de Campina Grande, onde foram testados cinco genótipos de cana-de-açúcar (G1- RB863129, G2- RB92579, G3- RB962962, G4- RB021754 e G5- RB041443) submetidos a três estratégias de manejo da irrigação (E1- Irrigação plena, E2- déficit hídrico com aplicação de 30 mM de piruvato de cálcio e E3- déficit hídrico sem aplicação de piruvato de cálcio), distribuídos em blocos casualizados, em esquema fatorial 5 × 3, com três repetições. O genótipo RB021754 sob déficit hídrico e sem aplicação foliar do piruvato de cálcio aumentou o teor de fibra (13,2%) e o peso do bolo úmido da cana (143,5 g). Os efeitos do déficit hídrico em genótipos de cana-de-açúcar são atenuados com aplicação exógena de 30 mM de piruvato de cálcio, com benefícios sobre o teor sacarose polarizada, teor de sacarose aparente do caldo, teor de sólidos solúveis, pureza, pol da cana corrigida, açúcares totais recuperáveis e massa de colmos, em relação as plantas sob déficit hídrico sem aplicação de piruvato de cálcio.

Experimental determination of k0 and Q0 values for 121Sb, 123Sb and 130Ba targets applying covariance analysis.

This work consists of an experimental determination of k0 and Q0 for 121Sb, 123Sb and 130Ba targets. Covariance analysis has been introduced to supply not only the overall uncertainties in these parameters but also their correlations. The irradiations were performed near the core of the IEA-R1 4.5 MW swimming-pool nuclear research reactor of the Nuclear and Energy Research Institute (IPEN-CNEN/SP), in São Paulo, Brazil. The epithermal neutron flux shape parameter, alpha, at the irradiation position is very close to zero, which favors to obtain Q0 values more accurately. Two irradiations were carried out in sequence, using two sets of samples: the first with bare samples and the second inside a Cd cover. The activity measurements were carried out in a previously calibrated HPGe gamma-ray spectrometer. The measurements were corrected for: saturation, decay time, cascade summing, geometry, self-attenuation, measuring time and mass. Standard sources of 152Eu, 133Ba, 60Co and 137Cs traceable to a 4πß-γ primary system were used to obtain the HPGe gamma-ray peak efficiency as a function of the energy. The experimental efficiency curve was performed by a fourth-degree polynomial fit, in the energy range of the standard sources, 121-1408 keV, it contains all correlations between points. For energies above 1408 keV, the efficiencies were obtained by the Monte Carlo Method. The covariance matrix methodology was applied to all uncertainties involved. The final values for k0 and Q0 were compared with the literature.

Primary standardization and determination of gamma ray emission intensities of Ho-166.

The procedure followed by the Nuclear Metrology Laboratory (LMN) at the IPEN-CNEN/SP, in São Paulo, for the primary standardization of 166Ho is described. The activity of 166Ho was determined by the efficiency extrapolation technique applied to a 4πß(PC)-γ coincidence system using a gas flow proportional counter in 4π geometry coupled to a 76 × 76 mm NaI(Tl) crystal. The results for the γ-rays intensities at 80.57 and 1379.45 keV were 0.0651(11) and 0.00904(11), respectively.

Validation of maternal recall on exclusive breastfeeding 12 months after childbirth.

OBJECTIVE: We aimed to assess the validity of maternal recall of exclusive breastfeeding (EBF) at 3 months obtained 12 months after childbirth. DESIGN: A population-based birth cohort study. The gold standard is maternal report of EBF at the age of 3 months (yes or no) and age of introduction of other foods in the infant's diet. EBF was considered when the mother reported that no liquid, semi-solid or solid food was introduced up to that moment. The variable to be validated was obtained at 12 months after childbirth when the mother was asked about the age of food introduction. The prevalence of EBF at 3 months, and sensitivity, specificity, positive (PPV) and negative predictive values (NPV), and accuracy of 12-month recall with 95 % CI were calculated. SETTING: Pelotas, Brazil. PARTICIPANTS: 3700 mothers of participants of the Pelotas 2004 Birth Cohort. RESULTS: The prevalence of EBF at 3 months was 27·8 % (95 % CI 26·4, 29·3) and 49·0 % (95 % CI 47·4, 50·6) according to gold standard and maternal recall, respectively. The sensitivity of maternal recall at 12 months was 98·3 % (95 % CI 97·4, 99·0), specificity 70·0 % (95 % CI 68·2, 71·7), PPV 55·8 % (95 % CI 53·4, 58·1), NPV 99·1 % (95 % CI 98·6, 99·5) and accuracy 77·9 % (95 % CI 76·6, 79·2). When the analyses were stratified by maternal and infant characteristics, the sensitivity remained around 98 %, and the specificity ranged from 64·4 to 81·8 %. CONCLUSIONS: EBF recalled at the end of the first year of infant's life is a valid measure to be used in epidemiological investigations.

Determination of k0 and Q0 for 74Se, 113In, 186W and 191Ir targets applying covariance analysis.

In the present work, the determinations of k0 and Q0 for 74Se, 113In, 186W and 191Ir targets were performed. The irradiations were conducted near the core of the IEA-R1 4.5 MW swimming-pool nuclear research reactor of the Instituto de Pesquisas Energéticas e Nucleares (IPEN-CNEN/SP - Nuclear and Energy Research Institute), in São Paulo, Brazil. The irradiation position was chosen where the neutron spectrum shape parameter α is very close to zero. For this reason, the correction to be applied for the determination of Q0 is very close to one, thus improving the accuracy of the results. For each experiment, two irradiations were carried out in sequence: the first one with bare samples and the second with a cadmium cover around the samples. All partial uncertainties were considered, applying the covariance matrix methodology. The final results were compared with the literature.

Disintegration rate and gamma-ray emission probability per decay measurement of Cu-64.

The procedure followed by the Nuclear Metrology Laboratory (LMN) at the IPEN for the standardization of activity of 64Cu is described. The measurement was carried out in a 4π (PC) ß-γ coincidence system. The activity per unit mass of the solution was determined by the extrapolation technique. The events were registered using a Time to Amplitude Converter (TAC) associated with a Multi-channel Analyzer. The gamma-ray emission probability per decay of the 1345.7keV transition of 64Cu determined with a calibrated REGe gamma-ray spectrometer was (0.472 ± 0.010) %, in agreement with the literature.

The feasibility of the polycarbonate Durolon(TM) as a thermal neutron dosimeter.

The feasibility of Durolon as a thermal neutron dosimeter was studied. As experimentally determined the proposed methodology covers a wide range of doses, from 0.1 mSv

Standardization of (99m)Tc by means of a software coincidence system.

The procedure followed by the Nuclear Metrology Laboratory, at IPEN, for the primary standardization of (99m)Tc is described. The primary standardization has been accomplished by the coincidence method. The beta channel efficiency was varied by electronic discrimination using a software coincidence counting system. Two windows were selected for the gamma channel: one at 140 keV gamma-ray and the other at 20 keV X-ray total absorption peaks. The experimental extrapolation curves were compared with Monte Carlo simulations by means of code ESQUEMA.

Disintegration rate and gamma ray emission probability per decay measurement of 123I.

A series of (123)I measurements have been carried out in a 4π(e(A),X)-γ coincidence system. The experimental extrapolation curve was determined and compared to Monte Carlo simulation, performed by code ESQUEMA. From the slope of the experimental curve, the total conversion coefficient for the 159 keV total gamma transition, α(159), was determined. All radioactive sources were also measured in an HPGe spectrometry system, in order to determine the gamma-ray emission probability per decay for several gamma transitions. All uncertainties involved and their correlations were analyzed applying the covariance matrix methodology and the measured parameters were compared with those from the literature.

Measurements of k0 and Q0 values for 64Zn(n,γ)65Zn and 68Zn(n,γ)69mZn reactions with covariance analysis.

The values of k(0) and Q(0) for (64)Zn(n,γ)(65)Zn and (68)Zn(n,γ)(69m)Zn reactions were determined experimentally. The irradiations were performed near the core of the IEA-R1 3.5MW nuclear research reactor of the Nuclear and Energy Research Institute - IPEN-CNEN/SP, in São Paulo, Brazil. The results for the neutron field parameters f and α were 49.7(19) and -1.1(31)×10(-3), respectively. The resulting values of k(0) and Q(0) for (64)Zn(n,γ)(65)Zn reaction were 5.63(8)×10(-3) and 1.69(6), respectively, and the corresponding values for (68)Zn(n,γ)(69m)Zn reaction were 4.00(6)×10(-4) and 2.34(4), respectively. These results were compared with the literature.

Determination of 198Au X-rays emission probabilities.

This work describes the measurements of the K X-ray and gamma-ray emission probabilities per decay of (198)Au performed at the Nuclear Metrology Laboratory (LMN) at the IPEN, São Paulo. The radioactive sample was obtained by means of (197)Au(n, gamma)(198)Au reaction irradiating an Au foil in a thermal neutron flux near the core of the IPEN 3.5 MW research reactor. The activity of samples was determined in a 4pibeta-gamma coincidence system, setting the gamma window at the 411.80 keV total energy absorption peak. The same samples were measured in two different spectrometers: a HPGe planar spectrometer with Be window, suitable for measurements in the low energy range and a coaxial REGe spectrometer. Both spectrometers were previously calibrated in a well defined geometry by means of standard sources calibrated in a 4pibeta-gamma coincidence system. MCNP4C Monte Carlo code was used for simulating the REGe spectrometer calibration curve, and a new version of code ESQUEMA was adopted for simulating the detection processes in the coincidence system, in order to predict the efficiency extrapolation curve.

Optimization of a coincidence system using plastic scintillators in 4pi geometry.

Improvements recently developed at the Nuclear Metrology Laboratory of IPEN-CNEN/SP in São Paulo were performed in order to increase the detector efficiency of a 4pibeta-gamma coincidence primary system using plastic scintillators in 4pi geometry. Measurements were undertaken and compared to the original system and Monte Carlo simulations of the extrapolation curves were calculated for this new system and compared to experimental results. For this purpose, the code Penelope was applied for calculating response functions for each detector and the code Esquema, developed at LMN, was used for simulating the decay scheme processes.

Standardization of (55)Fe by tracing method.

This work describes the procedure followed by the Laboratório de Metrologia Nuclear (LMN) for the standardization of (55)Fe by the tracing method. This technique was applied using two radionuclides, which decay by the electron capture process followed by a prompt gamma-ray, namely (51)Cr and (54)Mn, as tracers. The calibration was performed in a 4pibeta-gamma coincidence system. The efficiency was obtained by selecting a gamma-ray window set at the 320keV total absorption peak for (51)Cr and at 834keV for (54)Mn.

Combination of nonlinear function and mixing method for fitting HPGe efficiency curve in the 59-2754 kev energy range.

A nonlinear function in combination with the method of mixing activity-calibrated and uncalibrated gamma-ray sources is applied for fitting the experimental peak efficiency of HPGe spectrometers in the 59-2754 keV energy range. In addition, a step function was developed for fitting the gamma-ray background under the peak. Calibrated 241Am, 133Ba, 137Cs, 152Eu, 60Co and 88Y sources, as well as one 24Na source (treated as uncalibrated) were used for obtaining the experimental peak efficiency curve. The results were compared to the conventional linear polynomial fitting. From the fitted parameters, the 24Na activity was determined and compared with the result obtained from absolute measurements in a 4pibeta-gamma coincidence system.

Methodology for monitoring the residual activity in silicon rods irradiated with thermal neutrons.

A calibrated detection system developed for monitoring the residual activity in silicon rods irradiated for neutron transmutation doping is described. This residual activity is mainly due to 31Si and 32P, produced by thermal neutron capture reactions. The set-up consists of a scanning device, developed for positioning the rods, coupled to a GM detector for measuring beta-rays coming from the rod. The set-up has been calibrated using a 32P aqueous solution standardised in a 4pibeta gas-flow proportional counter system. The validity of the experimental procedure has been checked by Monte Carlo calculations. An additional check has been made by measuring the residual activity of a silicon rod irradiated in a well-known neutron fluence and the formalism used for calculating the activity on the basis of irradiation parameters is given. The results are compared to the radiological limit imposed by IAEA regulations in order to consider the material as exempt before it could be released for industrial applications.