Foliar water uptake does not contribute to embolism repair in beech (Fagus sylvatica L.).

BACKGROUND AND AIMS: Foliar water uptake has recently been suggested as a possible mechanism for the restoration of hydraulically dysfunctional xylem vessels. In this paper we used a combination of ecophysiological measurements, X-ray microcomputed tomography and cryo-scanning electron microscopy during a drought treatment to fully evaluate this hypothesis. KEY RESULTS: Based on an assessment of these methods in beech (Fagus sylvatica L.) seedlings we were able to (1) confirm an increase in the amount of hydraulically redistributed water absorbed by leaves when the soil water potential decreased, and (2) locate this redistributed water in hydraulically active vessels in the stem. However, (3) no embolism repair was observed irrespective of the organ under investigation (i.e. stem, petiole or leaf) or the intensity of drought. CONCLUSIONS: Our data provide evidence for a hydraulic pathway from the leaf surface to the stem xylem following a water potential gradient, but this pathway exists only in functional vessels and does not play a role in embolism repair for beech.

The blue mussel inside: 3D visualization and description of the vascular-related anatomy of Mytilus edulis to unravel hemolymph extraction.

The blue mussel Mytilus edulis is an intensely studied bivalve in biomonitoring programs worldwide. The lack of detailed descriptions of hemolymph-withdrawal protocols, particularly with regard to the place from where hemolymph could be perfused from, raises questions regarding the exact composition of aspirated hemolymph and does not exclude the possibility of contamination with other body-fluids. This study demonstrates the use of high resolution X-ray computed tomography and histology combined with 3D-reconstruction using AMIRA-software to visualize some important vascular-related anatomic structures of Mytilus edulis. Based on these images, different hemolymph extraction sites used in bivalve research were visualized and described, leading to new insights into hemolymph collection. Results show that hemolymph withdrawn from the posterior adductor muscle could be extracted from small spaces and fissures between the muscle fibers that are connected to at least one hemolymph supplying artery, more specifically the left posterior gastro-intestinal artery. Furthermore, 3D-reconstructions indicate that puncturing hemolymph from the pericard, anterior aorta, atria and ventricle in a non-invasive way should be possible. Hemolymph withdrawal from the heart is less straightforward and more prone to contamination from the pallial cavity. This study resulted simultaneously in a detailed description and visualization of the vascular-related anatomy of Mytilus edulis.

Hypercholesterolemia-induced increase in plasma oxidized LDL abrogated pro angiogenic response in kidney grafts.

BACKGROUND: Renal transplantation is increasingly associated with the presence of comorbidity factors such as dyslipidemia which could influence the graft outcome. We hypothesized that hypercholesterolemia could affect vascular repair processes and promote post-transplant renal vascular remodeling through the over-expression of the anti-angiogenic thrombospondin-1 interacting with vascular endothelial growth factor-A levels. METHODS: We tested this hypothesis in vitro, in vivo and in a human cohort using (1) endothelial cells; (2) kidney auto-transplanted pig subjected (n = 5) or not (n = 6) to a diet enriched in cholesterol and (3) a renal transplanted patient cohort (16 patients). RESULTS: Cells exposed to oxidized LDL showed reduced proliferation and an increased expression of thrombospondin-1. In pigs, 3 months after transplantation of kidney grafts, we observed a deregulation of the hypoxia inducible factor 1a-vascular endothelial growth factor-A axis induced in cholesterol-enriched diet animals concomitant with an overexpression of thrombospondin-1 and a decrease in cortical microvessel density promoting vascular remodeling. In patients, hypercholesterolemia was associated with decreased vascular endothelial growth factor-A plasma levels during early follow up after renal transplantation and increased chronic graft dysfunction. CONCLUSIONS: These results support a potential mechanism through which a high fat-diet impedes vascular repair in kidney graft and suggest the value of controlling cholesterolemia in recipient even at the early stage of renal transplantation.

Motion compensated micro-CT reconstruction for in-situ analysis of dynamic processes.

This work presents a framework to exploit the synergy between Digital Volume Correlation (DVC) and iterative CT reconstruction to enhance the quality of high-resolution dynamic X-ray CT (4D-µCT) and obtain quantitative results from the acquired dataset in the form of 3D strain maps which can be directly correlated to the material properties. Furthermore, we show that the developed framework is capable of strongly reducing motion artifacts even in a dataset containing a single 360° rotation.

Micro-computed tomography for the quantification of blocked fibers in hemodialyzers.

A novel technique based on micro-CT scanning is developed to quantify coagulation in fibers of hemodialyzers. This objectivation is needed to allow accurate assessment of thrombogenicity of dialyzers used during hemodialysis, for example when comparing different strategies to avoid coagulation and/or fiber blocking. The protocol allowed imaging at a resolution of 25 µm, making it possible to count the open, non-coagulated fibers in a non-invasive way. In 3 fresh, non-used FX600 hemodialyzers, patent fiber counts were extremely consistent (10748 ± 2). To illustrate the potential of this technique, different dialysis parameters currently used as surrogates for fiber blocking were evaluated during 20 hemodialysis sessions. After dialysis, the FX600 dialyzers were visually scored for clotting, dried and subsequently weighed and scanned. The number of patent fibers (10003 [8763,10330], range 534-10692) did not correlate with any of the recorded surrogate parameters. Micro-CT scanning is a feasible, objective, non-invasive, accurate and reproducible tool for quantification of the degree of fiber blocking in a hemodialyzer after use, making it a potential gold standard for use in studies on fiber blocking during renal replacement therapies.

Building trophic specializations that result in substantial niche partitioning within a young adaptive radiation.

Dietary partitioning often accompanies the increased morphological diversity seen during adaptive radiations within aquatic systems. While such niche partitioning would be expected in older radiations, it is unclear how significant morphological divergence occurs within a shorter time period. Here we show how differential growth in key elements of the feeding mechanism can bring about pronounced functional differences among closely related species. An incredibly young adaptive radiation of three Cyprinodon species residing within hypersaline lakes in San Salvador Island, Bahamas, has recently been described. Characterized by distinct head shapes, gut content analyses revealed three discrete feeding modes in these species: basal detritivory as well as derived durophagy and lepidophagy (scale-feeding). We dissected, cleared and stained, and micro-CT scanned species to assess functionally relevant differences in craniofacial musculoskeletal elements. The widespread feeding mode previously described for cyprinodontiforms, in which the force of the bite may be secondary to the requisite dexterity needed to pick at food items, is modified within both the scale specialist and the durophagous species. While the scale specialist has greatly emphasized maxillary retraction, using it to overcome the poor mechanical advantage associated with scale-eating, the durophage has instead stabilized the maxilla. In all species the bulk of the adductor musculature is composed of AM A1. However, the combined masses of both adductor mandibulae (AM) A1 and A3 in the scale specialist were five times that of the other species, showing the importance of growth in functional divergence. The scale specialist combines plesiomorphic jaw mechanisms with both a hypertrophied AM A1 and a slightly modified maxillary anatomy (with substantial functional implications) to generate a bite that is both strong and allows a wide range of motion in the upper jaw, two attributes that normally tradeoff mechanically. Thus, a significant feeding innovation (scale-eating, rarely seen in fishes) may evolve based largely on allometric changes in ancestral structures. Alternatively, the durophage shows reduced growth with foreshortened jaws that are stabilized by an immobile maxilla. Overall, scale specialists showed the most divergent morphology, suggesting that selection for scale-biting might be stronger or act on a greater number of traits than selection for either detritivory or durophagy. The scale specialist has colonized an adaptive peak that few lineages have climbed. Thus, heterochronic changes in growth can quickly produce functionally relevant change among closely related species.

Integrated Three-Dimensional Microanalysis Combining X-Ray Microtomography and X-Ray Fluorescence Methodologies.

A novel 3D elemental and morphological analysis approach is presented combining X-ray computed tomography (µCT), X-ray fluorescence (XRF) tomography, and confocal XRF analysis in a single laboratory instrument (Herakles). Each end station of Herakles (µCT, XRF-CT, and confocal XRF) represents the state-of-the-art of currently available laboratory techniques. The integration of these techniques enables linking the (quantitative) spatial distribution of chemical elements within the investigated materials to their three-dimensional (3D) internal morphology/structure down to 1-10 µm resolution level, which has not been achieved so-far using laboratory X-ray techniques. The concept of Herakles relies strongly on its high precision (around 100 nm) air-bearing motor system that connects the different end-stations, allowing combined measurements based on the above X-ray techniques while retaining the coordinate system. In-house developed control and analysis software further ensures a smooth integration of the techniques. Case studies on a Cu test pattern, a Daphnia magna model organism and a perlite biocatalyst support material demonstrate the attainable resolution, elemental sensitivity of the instrument, and the strength of combining these three complementary methodologies.

Renal auto-transplantation promotes cortical microvascular network remodeling in a preclinical porcine model.

The vascular network is a major target of ischemia-reperfusion, but has been poorly investigated in renal transplantation. The aim of this study was to characterize the remodeling of the renal vascular network that follows ischemia-reperfusion along with the most highly affected cortex section in a preclinical renal transplantation model. There were two experimental groups. The first was a grafted kidney group consisting of large white pigs for which the left kidney was harvested, cold flushed, preserved for 24 h in the University of Wisconsin's preservation solution, and then auto-transplanted (n = 5); the right kidney was removed to mimic the situation of human kidney transplantation. The second group (uni-nephrectomized kidney group) consisted of animals that underwent only right nephrectomy, but not left renal transplantation (n = 5). Three months after autotransplantation, the kidneys were studied by X-ray microcomputed tomography. Vessel morphology and density and tortuosity of the network were analyzed using a 3D image analysis method. Cortical blood flow was determined by laser doppler analysis and renal function and tissue injury assessed by plasma creatinine levels and histological analysis. Renal ischemia-reperfusion led to decreased vascular segment volume associated with fewer vessels of less than 30 µm, particularly in the inner cortex:0.79 ± 0.54% in grafted kidneys vs. 7.06 ± 1.44% in uni-nephrectomized kidneys, p < 0.05. Vessels showed higher connectivity throughout the cortex (the arborescence factor of the whole cortex was less in grafted than uni-nephrectomized kidneys 0.90 ± 0.04 vs. 1.07 ± 0.05, p < 0.05, with an increase in the number of bifurcations). Furthermore, cortical blood flow decreased early in kidney grafts and remained low three months after auto-transplantation. The decrease in microvasculature correlated with a deterioration of renal function, proteinuria, and tubular dysfunction, and was associated with the development of fibrous tissue. This work provides new evidence concerning the impact of ischemia-reperfusion injuries on the spectrum of renal vascular diseases and could potentially guide future therapy to preserve microvessels in transplantation ischemia-reperfusion injury.

Penetration and Effectiveness of Micronized Copper in Refractory Wood Species.

The North American wood decking market mostly relies on easily treatable Southern yellow pine (SYP), which is being impregnated with micronized copper (MC) wood preservatives since 2006. These formulations are composed of copper (Cu) carbonate particles (CuCO3·Cu(OH)2), with sizes ranging from 1 nm to 250 µm, according to manufacturers. MC-treated SYP wood is protected against decay by solubilized Cu2+ ions and unreacted CuCO3·Cu(OH)2 particles that successively release Cu2+ ions (reservoir effect). The wood species used for the European wood decking market differ from the North American SYP. One of the most common species is Norway spruce wood, which is poorly treatable i.e. refractory due to the anatomical properties, like pore size and structure, and chemical composition, like pit membrane components or presence of wood extractives. Therefore, MC formulations may not suitable for refractory wood species common in the European market, despite their good performance in SYP. We evaluated the penetration effectiveness of MC azole (MCA) in easily treatable Scots pine and in refractory Norway spruce wood. We assessed the effectiveness against the Cu-tolerant wood-destroying fungus Rhodonia placenta. Our findings show that MCA cannot easily penetrate refractory wood species and could not confirm the presence of a reservoir effect.

Loss of Type I Collagen Telopeptide Lysyl Hydroxylation Causes Musculoskeletal Abnormalities in a Zebrafish Model of Bruck Syndrome.

Bruck syndrome (BS) is a disorder characterized by joint flexion contractures and skeletal dysplasia that shows strong clinical overlap with the brittle bone disease osteogenesis imperfecta (OI). BS is caused by biallelic mutations in either the FKBP10 or the PLOD2 gene. PLOD2 encodes the lysyl hydroxylase 2 (LH2) enzyme, which is responsible for the hydroxylation of lysine residues in fibrillar collagen telopeptides. This hydroxylation directs crosslinking of collagen fibrils in the extracellular matrix, which is necessary to provide stability and tensile integrity to the collagen fibrils. To further elucidate the function of LH2 in vertebrate skeletal development, we created a zebrafish model harboring a homozygous plod2 nonsense mutation resulting in reduced telopeptide hydroxylation and crosslinking of bone type I collagen. Adult plod2 mutants present with a shortened body axis and severe skeletal abnormalities with evidence of bone fragility and fractures. The vertebral column of plod2 mutants is short and scoliotic with compressed vertebrae that show excessive bone formation at the vertebral end plates, and increased tissue mineral density in the vertebral centra. The muscle fibers of mutant zebrafish have a reduced diameter near the horizontal myoseptum. The endomysium, a layer of connective tissue ensheathing the individual muscle fibers, is enlarged. Transmission electron microscopy of mutant vertebral bone shows type I collagen fibrils that are less organized with loss of the typical plywood-like structure. In conclusion, plod2 mutant zebrafish show molecular and tissue abnormalities in the musculoskeletal system that are concordant with clinical findings in BS patients. Therefore, the plod2 zebrafish mutant is a promising model for the elucidation of the underlying pathogenetic mechanisms leading to BS and the development of novel therapeutic avenues in this syndrome. © 2016 American Society for Bone and Mineral Research.

µCT-Based Analysis of the Solid Phase in Foams: Cell Wall Corrugation and other Microscopic Features.

This work presents a series of three-dimensional computational methods with the objective of analyzing and quantifying some important structural characteristics in a collection of low-density polyolefin-based foams. First, the solid phase tortuosity, local thickness, and surface curvature, have been determined over the solid phase of the foam. These parameters were used to quantify the presence of wrinkles located at the cell walls of the foams under study. In addition, a novel segmentation technique has been applied to the continuous solid phase. This novel method allows performing a separate analysis of the constituting elements of this phase, that is, cell struts and cell walls. The methodology is based on a solid classification algorithm and evaluates the local topological dissimilarities existing between these elements. Thanks to this method it was possible to perform a separate analysis of curvature, local thickness, and corrugation ratio in the solid constituents that reveals additional differences that were not detected in the first analysis of the continuous structure. The methods developed in this work are applicable to other types of porous materials in fields such as geoscience or biomedicine.

Details of human middle ear morphology based on micro-CT imaging of phosphotungstic acid stained samples.

A multitude of morphological aspects of the human middle ear (ME) were studied qualitatively and/or quantitatively through the postprocessing and interpretation of micro-CT (micro X-ray computed tomography) data of six human temporal bones. The samples were scanned after phosphotungstic acid staining to enhance soft-tissue contrast. The influence of this staining on ME ossicle configuration was shown to be insignificant. Through postprocessing, the image data were converted into surface models, after which the approaches diverged depending on the topics of interest. The studied topics were: the ME ligaments; morphometric and mechanical parameters of the ossicles relating to inertia and the ossicular lever arm ratio; the morphology of the distal incus; the contact surface areas of the tympanic membrane (TM) and of the stapes footplate; and the thickness of the TM, round window of the cochlea, ossicle joint spaces, and stapedial annular ligament. Some of the resulting insights are relevant in ongoing discussions concerning ME morphology and mechanical functions, while other results provide quantitative data to add to existing data. All findings are discussed in the light of other published data and many are relevant for the construction of mechanical finite element simulations of the ME.

A micro-computed tomography technique to study the quality of fibre optics embedded in composite materials.

Quality of embedment of optical fibre sensors in carbon fibre-reinforced polymers plays an important role in the resultant properties of the composite, as well as for the correct monitoring of the structure. Therefore, availability of a tool able to check the optical fibre sensor-composite interaction becomes essential. High-resolution 3D X-ray Micro-Computed Tomography, or Micro-CT, is a relatively new non-destructive inspection technique which enables investigations of the internal structure of a sample without actually compromising its integrity. In this work the feasibility of inspecting the position, the orientation and, more generally, the quality of the embedment of an optical fibre sensor in a carbon fibre reinforced laminate at unit cell level have been proven.

Cryogel-PCL combination scaffolds for bone tissue repair.

The present work describes the development and the evaluation of cryogel-poly-ε-caprolactone combinatory scaffolds for bone tissue engineering. Gelatin was selected as cell-interactive biopolymer to enable the adhesion and the proliferation of mouse calvaria pre-osteoblasts while poly-ε-caprolactone was applied for its mechanical strength required for the envisaged application. In order to realize suitable osteoblast carriers, methacrylamide-functionalized gelatin was introduced into 3D printed poly-ε-caprolactone scaffolds created using the Bioplotter technology, followed by performing a cryogenic treatment which was concomitant with the redox-initiated, covalent crosslinking of the gelatin derivative (i.e. cryogelation). In a first part, the efficiency of the cryogelation process was determined using gel fraction experiments and by correlating the results with conventional hydrogel formation at room temperature. Next, the optimal cryogelation parameters were fed into the combinatory approach and the scaffolds developed were characterized for their structural and mechanical properties using scanning electron microscopy, micro-computed tomography and compression tests respectively. In a final part, in vitro biocompatibility assays indicated a good colonization of the pre-osteoblasts and the attachment of viable cells onto the cryogenic network. However, the results also show that the cellular infiltration throughout the entire scaffold is suboptimal, which implies that the scaffold design should be optimized by reducing the cryogel density.

Cavitation: a blessing in disguise? New method to establish vulnerability curves and assess hydraulic capacitance of woody tissues.

The hydraulic performance of woody species during drought is currently of high interest in the context of climate change. It is known that woody species have the capacity to mitigate water shortage by using internally stored water. Elastic shrinkage of living cells and also water release during cavitation contribute to the so-called 'hydraulic capacitance' (C) of the plant, which adds water to the transpiration stream and buffers fluctuations in water potential. Although sap-conducting conduits may ultimately serve as a water pool, cavitation will hamper the conduction of sap. Both hydraulic conductivity and C are thus inextricably linked and the interaction between both should be studied to better understand hydraulic functioning of woody species during drought. However, measurements of C are scarce and no distinction is usually made between C from elastic storage and C supplied by cavitation. In this paper, we propose a new method to assess both the decrease in hydraulic conductivity and the change in C during bench dehydration of a whole-branch segment using continuous measurements of acoustic emissions, radial diameter shrinkage and gravimetrical water loss. With this method we could establish proper vulnerability curves for grapevine (Vitis vinifera L. 'Johanniter') and quantify C during dehydration. Our results showed that loss in hydraulic conductivity during the cavitation phase was accompanied by 22-92% gain in hydraulic capacitance; therefore, a certain degree of cavitation may be tolerated in grapevine during periods of drought stress.

Functional anatomy and kinematics of the oral jaw system during terrestrial feeding in Periophthalmus barbarus.

The Atlantic mudskipper, Periophthalmus barbarus, is an amphibious fish that successfully overcomes the numerous physical challenges of capturing prey in a terrestrial environment. However, it is unclear what changes in the morphology and function of the feeding apparatus contribute to the mudskipper's successful transition from aquatic to terrestrial capture of prey. In particular, how does the mudskipper achieve effective prehension of land-based prey using its percomorph feeding apparatus? To address that question, we performed a morphological analysis of the feeding apparatus of P. barbarus based on microcomputed tomography scanning, histological sectioning, and dissections as well as a kinematic analysis based on high-speed video and X-ray video to quantify the movements of the oral jaw apparatus elements. Our results show that the neurocranium remains in a fixed position relative to the pectoral girdle as the fish pivots over its pectoral fins toward the prey. The premaxilla rotates dorsally and protrudes downward over the prey. The dentary is rotated ventrally over an angle of 120°, which is facilitated by an intramandibular joint. These motions of the neurocranium, premaxilla, and dentary reorient the mouth aperture so it is parallel to the substrate, thereby allowing the jaws to be placed over the prey. The prey is grabbed between the oral teeth or scooped into the mouth primarily via rapid closing motion of the lower jaw. This analysis of P. barbarus clarifies the morphological and kinematic characteristics required by fish to become successful terrestrial feeders at the environmental transition between water and land.

Biomechanical determinants of bite force dimorphism in Cyclommatus metallifer stag beetles.

In the stag beetle family (Lucanidae), males have diverged from females by sexual selection. The males fight each other for mating opportunities with their enlarged mandibles. It is known that owners of larger fighting apparatuses are favoured to win the male-male fights, but it was unclear whether male stag beetles also need to produce high bite forces while grabbing and lifting opponents in fights. We show that male Cyclommatus metallifer stag beetles bite three times as forcefully as females. This is not entirely unexpected given the spectacular nature of the fights, but all the more impressive given the difficulty of achieving this with their long mandibles (long levers). Our results suggest no increase in male intrinsic muscle strength to accomplish this. However, morphological analyses show that the long mandibular output levers in males are compensated by elongated input levers (and thus a wider anterior side of the head). The surplus of male bite force capability is realized by enlargement of the closer muscles of the mandibles, while overall muscle force direction remained optimal. To enable the forceful bites required to ensure male reproductive success, male head size and shape are adapted for long input levers and large muscles. Therefore, the entire head should be regarded as an integral part of male armature.

Analyzing the human liver vascular architecture by combining vascular corrosion casting and micro-CT scanning: a feasibility study.

Although a full understanding of the hepatic circulation is one of the keys to successfully perform liver surgery and to elucidate liver pathology, relatively little is known about the functional organization of the liver vasculature. Therefore, we materialized and visualized the human hepatic vasculature at different scales, and performed a morphological analysis by combining vascular corrosion casting with novel micro-computer tomography (CT) and image analysis techniques. A human liver vascular corrosion cast was obtained by simultaneous resin injection in the hepatic artery (HA) and portal vein (PV). A high resolution (110 µm) micro-CT scan of the total cast allowed gathering detailed macrovascular data. Subsequently, a mesocirculation sample (starting at generation 5; 88 × 68 × 80 mm³) and a microcirculation sample (terminal vessels including sinusoids; 2.0 × 1.5 × 1.7 mm³) were dissected and imaged at a 71-µm and 2.6-µm resolution, respectively. Segmentations and 3D reconstructions allowed quantifying the macro- and mesoscale branching topology, and geometrical features of HA, PV and hepatic venous trees up to 13 generations (radii ranging from 13.2 mm to 80 µm; lengths from 74.4 mm to 0.74 mm), as well as microvascular characteristics (mean sinusoidal radius of 6.63 µm). Combining corrosion casting and micro-CT imaging allows quantifying the branching topology and geometrical features of hepatic trees using a multiscale approach from the macro- down to the microcirculation. This may lead to novel insights into liver circulation, such as internal blood flow distributions and anatomical consequences of pathologies (e.g. cirrhosis).

High spectral and spatial resolution X-ray transmission radiography and tomography using a Color X-ray Camera.

High resolution X-ray radiography and computed tomography are excellent techniques for non-destructive characterization of an object under investigation at a spatial resolution in the micrometer range. However, as the image contrast depends on both chemical composition and material density, no chemical information is obtained from this data. Furthermore, lab-based measurements are affected by the polychromatic X-ray beam, which results in beam hardening effects. New types of X-ray detectors which provide spectral information on the measured X-ray beam can help to overcome these limitations. In this paper, an energy dispersive CCD detector with high spectral resolution is characterized for use in high resolution radiography and tomography, where a focus is put on the experimental conditions and requirements of both measurement techniques.

Ultrasound stimulus to enhance the bone regeneration capability of gelatin cryogels.

In the present study, gelatin-based cryogels have been seeded with human SAOS-2 osteoblasts. In order to overcome the drawbacks associated with in vitro culture systems, such as limited diffusion and inhomogeneous cell-matrix distribution, this work describes the application of ultrasounds (average power, 149 mW; frequency, 1.5 MHz) to physically enhance the cell culture in vitro. The results indicate that the physical stimulation of cell-seeded gelatin-based cryogels upregulates the bone matrix production.