An ultrawide field-of-view pinhole compound eye using hemispherical nanowire array for robot vision.

Garnering inspiration from biological compound eyes, artificial vision systems boasting a vivid range of diverse visual functional traits have come to the fore recently. However, most of these artificial systems rely on transformable electronics, which suffer from the complexity and constrained geometry of global deformation, as well as potential mismatches between optical and detector units. Here, we present a unique pinhole compound eye that combines a three-dimensionally printed honeycomb optical structure with a hemispherical, all-solid-state, high-density perovskite nanowire photodetector array. The lens-free pinhole structure can be designed and fabricated with an arbitrary layout to match the underlying image sensor. Optical simulations and imaging results matched well with each other and substantiated the key characteristics and capabilities of our system, which include an ultrawide field of view, accurate target positioning, and motion tracking function. We further demonstrate the potential of our unique compound eye for advanced robotic vision by successfully completing a moving target tracking mission.

Full-color fiber light-emitting diodes based on perovskite quantum wires.

Fiber light-emitting diodes (Fi-LEDs), which can be used for wearable lighting and display devices, are one of the key components for fiber/textile electronics. However, there exist a number of impediments to overcome on device fabrication with fiber-like substrates, as well as on device encapsulations. Here, we uniformly grew all-inorganic perovskite quantum wire arrays by filling high-density alumina nanopores on the surface of Al fibers with a dip-coating process. With a two-step evaporation method to coat a surrounding transporting layer and semitransparent electrode, we successfully fabricated full-color Fi-LEDs with emission peaks at 625 nanometers (red), 512 nanometers (green), and 490 nanometers (sky-blue), respectively. Intriguingly, additional polydimethylsiloxane packaging helps instill the mechanical bendability, stretchability, and waterproof feature of Fi-LEDs. The plasticity of Al fiber also allows the one-dimensional architecture Fi-LED to be shaped and constructed for two-dimensional or even three-dimensional architectures, opening up a new vista for advanced lighting with unconventional formfactors.

Ultra-Sensitive and Stable Multiplexed Biosensors Array in Fully Printed and Integrated Platforms for Reliable Perspiration Analysis.

Electrochemical biosensors have emerged as one of the promising tools for tracking human body physiological dynamics via non-invasive perspiration analysis. However, it remains a key challenge to integrate multiplexed sensors in a highly controllable and reproducible manner to achieve long-term reliable biosensing, especially on flexible platforms. Herein, a fully inkjet printed and integrated multiplexed biosensing patch with remarkably high stability and sensitivity is reported for the first time. These desirable characteristics are enabled by the unique interpenetrating interface design and precise control over active materials mass loading, owing to the optimized ink formulations and droplet-assisted printing processes. The sensors deliver sensitivities of 313.28 µA mm-1 cm-2 for glucose and 0.87 µA mm-1 cm-2 for alcohol sensing with minimal drift over 30 h, which are among the best in the literature. The integrated patch can be used for reliable and wireless diet monitoring or medical intervention via epidermal analysis and would inspire the advances of wearable devices for intelligent healthcare applications.

Geometric Shape Recognition with an Ultra-High Density Perovskite Nanowire Array-Based Artificial Vision System.

Artificial vision systems (AVS) have potential applications in visual prosthetics and artificially intelligent robotics, and they require a preprocessor and a processor to mimic human vision. Halide perovskite (HP) is a promising preprocessor and processor due to its excellent photoresponse, ubiquitous charge migration pathways, and innate hysteresis. However, the material instability associated with HP thin films hinders their utilization in physical AVSs. Herein, we have developed ultrahigh-density arrays of robust HP nanowires (NWs) rooted in a porous alumina membrane (PAM) as the active layer for an AVS. The NW devices exhibit gradual photocurrent change, responding to changes in light pulse duration, intensity, and number, and allow contrast enhancement of visual inputs with a device lifetime of over 5 months. The NW-based processor possesses temporally stable conductance states with retention >105 s and jitter <10%. The physical AVS demonstrated 100% accuracy in recognizing different shapes, establishing HP as a reliable material for neuromorphic vision systems.

High-efficiency, flexible and large-area red/green/blue all-inorganic metal halide perovskite quantum wires-based light-emitting diodes.

Metal halide perovskites have shown great promise as a potential candidate for next-generation solid state lighting and display technologies. However, a generic organic ligand-free and antisolvent-free solution method to fabricate highly efficient full-color perovskite light-emitting diodes has not been realized. Herein, by utilizing porous alumina membranes with ultra-small pore size as templates, we have successfully fabricated crystalline all-inorganic perovskite quantum wire arrays with ultrahigh density and excellent uniformity, using a generic organic ligand-free and anti-solvent-free solution method. The quantum confinement effect, in conjunction with the high light out-coupling efficiency, results in high photoluminescence quantum yield for blue, sky-blue, green and pure-red perovskite quantum wires arrays. Consequently, blue, sky-blue, green and pure-red LED devices with spectrally stable electroluminescence have been successfully fabricated, demonstrating external quantum efficiencies of 12.41%, 16.49%, 26.09% and 9.97%, respectively, after introducing a dual-functional small molecule, which serves as surface passivation and hole transporting layer, and a halide vacancy healing agent.

A neuromorphic bionic eye with filter-free color vision using hemispherical perovskite nanowire array retina.

Spherical geometry, adaptive optics, and highly dense network of neurons bridging the eye with the visual cortex, are the primary features of human eyes which enable wide field-of-view (FoV), low aberration, excellent adaptivity, and preprocessing of perceived visual information. Therefore, fabricating spherical artificial eyes has garnered enormous scientific interest. However, fusing color vision, in-device preprocessing and optical adaptivity into spherical artificial eyes has always been a tremendous challenge. Herein, we demonstrate a bionic eye comprising tunable liquid crystal optics, and a hemispherical neuromorphic retina with filter-free color vision, enabled by wavelength dependent bidirectional synaptic photo-response in a metal-oxide nanotube/perovskite nanowire hybrid structure. Moreover, by tuning the color selectivity with bias, the device can reconstruct full color images. This work demonstrates a unique approach to address the color vision and optical adaptivity issues associated with artificial eyes that can bring them to a new level approaching their biological counterparts.

Electric field-enhanced immobilization of Cd and Pb in contaminated river sediments.

The immobilization of heavy metal pollutants in river and lake sediments is critical for environmental health and safety. In this study, combined electrokinetic and chemical immobilization were used to remediate Cd and Pb polluted river sediments. The effect of the concentrations of the immobilization reagents and the applied voltage were investigated. Immobilization ratios for Cd and Pb of 98.6% and 84.3%, respectively, was achieved at 7.5 V cm-1 using seven successive rounds of recycling of the immobilization solution of mixed 1.0 g L-1 CO32- and 3.0 g L-1 H2PO4- at the volume ratio of 1:9 with 100 mL immobilization solution to 100 g sediment. The enhancement effect of the electric field is mainly attributed to the increased contact between the immobilization reagents and the heavy metals due to electroosmosis. This study provides a new method for the treatment of heavy metal-polluted sediments.

Three-Dimensional Nanopillar Arrays-Based Efficient and Flexible Perovskite Solar Cells with Enhanced Stability.

Perovskite nanopillars (PNPs) are propitious candidates for solar irradiation harvesting and are potential alternatives to thin films in flexible photovoltaics. To realize efficient daily energy output, photovoltaics must absorb sunlight over a broad range of incident angles and wavelengths congruent with the solar spectrum. Herein, we report highly periodic three-dimensional (3D) PNP-based flexible photovoltaics possessing a core-shell structure. The vertically aligned PNP arrays demonstrate up to 95.70% and 75.10% absorption at peak and under an incident angle of 60°. The efficient absorption and the orthogonal carrier collection facilitate an external quantum efficiency of 84.0%-89.18% for broadband wavelength. PNPs have been successfully implemented in flexible solar cells. The porous alumina membrane protects PNPs against water and oxygen intrusion and thereby imparts robustness to photovoltaic devices. Meanwhile, the excellent tolerance to mechanical stress/strain enables our unique PNP-based device to provide efficient solar-to-electricity conversion while undergoing mechanical bending.

Uncooled self-powered hemispherical biomimetic pit organ for mid- to long-infrared imaging.

Infrared vision is highly desirable for applications in multifarious fields. Of the few species with this visual capability, snakes have exceptional infrared perception with the assistance of pit organs. Inspired by the pit organ design we present here a hemispherical biomimetic infrared imaging device. The devices use high-density ionic thermoelectric polymer nanowire arrays that serve as the sensing nerve cells. The individual nanowires exhibit notable voltage response to temperature variation in test objects. An infrared sensor array with 625 pixels on the hemispherical substrate is successfully demonstrated with an ultrawide field of view up to 135°. The device can image body temperature objects without a cooling system and external power supply. This work opens up opportunities for the design and fabrication of bioinspired infrared imaging devices based on emerging ionic thermoelectric materials.

Image processing with a multi-level ultra-fast three dimensionally integrated perovskite nanowire array.

Besides its ubiquitous applications in optoelectronics, halide-perovskites (HPs) have also carved a niche in the domain of resistive switching memories (Re-RAMs). However owing to the material and electrical instability challenges faced by HP thin-films, rarely perovskite Re-RAMs are used to experimentally demonstrate data processing which is a fundamental requirement for neuromorphic applications. Here, for the first time, lead-free, ultrahigh density HP nanowire (NW) array Re-RAM has been utilized to demonstrate image processing via design of convolutional kernels. The devices exhibited superior switching characteristics including a high endurance of 5 × 106 cycles, an ultra-fast erasing and writing speed of 900 ps and 2 ns, respectively, and a retention time >5 × 104 s for the resistances. The work is bolstered by an in-depth mechanistic study and first-principles simulations which provide evidence of electrochemical metallization triggering the switching. Employing the robust multi-level switching behaviour, image processing functions of embossing, outlining and sharpening were successfully implemented.

Strongly Quantum-Confined Perovskite Nanowire Arrays for Color-Tunable Blue-Light-Emitting Diodes.

Color tunability of perovskite light-emitting diodes (PeLEDs) by mixed halide compositional engineering is one of the primary intriguing characteristics of PeLEDs. However, mixed halide PeLEDs are often susceptible to color red-shifting caused by halide ion segregation. In this work, strongly quantum-confined perovskite nanowires (QPNWs) made of CsPbBr3 are grown in nanoporous anodic alumina templates using a closed space sublimation process. By tuning the pore size with atomic layer deposition, QPNWs with a diameter of 6.6 to 2.8 nm have been successfully obtained, with continuous tunable photoluminescence emission color from green (512 nm) to pure blue (467 nm). To better understand the photophysics of QPNWs, carrier dynamics and the benefit of alumina passivation are studied and discussed in detail. Eventually, PeLEDs using various diameters of CsPbBr3 QPNWs are successfully fabricated with cyan color (492 nm) PeLEDs, achieving a record high 7.1% external quantum efficiency (EQE) for all CsPbBr3-based cyan color PeLEDs. Sky blue (481 nm) and pure blue (467 nm) PeLEDs have also been successfully demonstrated, respectively. The work here demonstrates a different approach to achieve quantum-confined one-dimensional perovskite structures and color-tunable PeLEDs, particularly blue PeLEDs.

Investigation of the role of template features on the electrically induced structure formation (EISF) for a faithful duplication.

Electrically induced structure formation, as a physical approach to fabricate micro/nanostructures, has attracted much attention because of the simple process, low-cost, high-efficiency, and wide applications on electronics, microfluidics, and so forth. Hitherto, the influence of some process parameters, such as voltage, air gap, film thickness, polymer properties, on the polymeric behavior, and the structure formation has been explored, neglecting the effects of the template features, which affect the polymer deformation. Especially for the conductive protrusions directly contacting the polymer, the phenomenon of electric breakdown may occur, leading to a failure of structure formation. The limitation of the research on the template features triggers the necessity to study its influence for a faithful deformation. In this paper, three types of patterned template are studied based on the electric field at the air-polymer interface, consisting of completely conductive template, partially conductive template, and dielectric template. Comprehensive consideration of the electric intensity for a sufficient driving pressure and the leaky current for preventing damaging the polymer, some guiding opinions on the template material and geometry can be provided to design the patterned template for the electrically induced structure formation process with a purpose for a faithful structure.

Nanoscale Electrodes: Nanoscale Electrodes for Flexible Electronics by Swelling Controlled Cracking (Adv. Mater. 30/2016).

The fabrication of nanospaced electrodes on a flexible substrate is a great challenge. W. Wang, J. Shao, and co-workers propose a novel approach to fabricate nanogap electrodes for flexible electronics using a swelling-controlled cracking method, which is described on page 6337. This method has the advantages of high applicability, parallel manufacturing capacity, and compatibility with flexible substrates. It provides a new way to create high-performance flexible electronics in a cost-efficient fashion.

Generation of Hierarchically Ordered Structures on a Polymer Film by Electrohydrodynamic Structure Formation.

The extensive applications of hierarchical structures in optoelectronics, micro/nanofluidics, energy conservation, etc., have led to the development of a variety of approaches for their fabrication, which can be categorized as bottom-up or top-down strategies. Current bottom-up and top-down strategies bear a complementary relationship to each other due to their processing characteristics, i.e., the advantages of one method correspond to the disadvantages of the other, and vice versa. Here we propose a novel method based on electrohydrodynamic structure formation, aimed at combining the main advantages of the two strategies. The method allows the fabrication of a hierarchically ordered structure with well-defined geometry and high mechanical durability on a polymer film, through a simple and low-cost process also suitable for mass-production. In this approach, upon application of an electric field between a template and a substrate sandwiching an air gap and a polymer film, the polymer is pulled toward the template and further flows into the template cavities, resulting in a hierarchical structure with primary and secondary patterns determined by electrohydrodynamic instability and by the template features, respectively. In this work, the fabrication of a hierarchical structure by electrohydrodynamic structure formation is studied using numerical simulations and experimental tests. The proposed method is then employed for the one-step fabrication of a hierarchical structure exhibiting a gradual transition in the periodicity of the primary structure using a slant template and a flat polymer film, which presents an excellent performance on controllable wettability.

On utilizing alternating current-flow field effect transistor for flexibly manipulating particles in microfluidics and nanofluidics.

By imposing a biased gate voltage to a center metal strip, arbitrary symmetry breaking in induced-charge electroosmotic flow occurs on the surface of this planar gate electrode, a phenomenon termed as AC-flow field effect transistor (AC-FFET). In this work, the potential of AC-FFET with a shiftable flow stagnation line to flexibly manipulate micro-nano particle samples in both a static and continuous flow condition is demonstrated via theoretical analysis and experimental validation. The effect of finite Debye length of induced double-layer and applied field frequency on the manipulating flexibility factor for static condition is investigated, which indicates AC-FFET turns out to be more effective for achieving a position-controllable concentrating of target nanoparticle samples in nanofluidics compared to the previous trial in microfluidics. Besides, a continuous microfluidics-based particle concentrator/director is developed to deal with incoming analytes in dynamic condition, which exploits a design of tandem electrode configuration to consecutively flow focus and divert incoming particle samples to a desired downstream branch channel, as prerequisite for a following biochemical analysis. Our physical demonstrations with AC-FFET prove valuable for innovative designs of flexible electrokinetic frameworks, which can be conveniently integrated with other microfluidic or nanofluidic components into a complete lab-on-chip diagnostic platform due to a simple electrode structure.

Nanoscale Electrodes for Flexible Electronics by Swelling Controlled Cracking.

Nanogap electrodes are realized using pre-patterned electrodes and a swelling controlled cracking method. Parallel fabrication of nanogap electrodes on flexible substrates can be achieved using this method. This swelling-controlled cracking method is promising for fabricating high-performance flexible electronics. UV photodetectors with ZnO nanoparticle-bridged nanogap electrodes exhibit high responsivity and external quantum efficiency.

Switchable Dry Adhesion with Step-like Micropillars and Controllable Interfacial Contact.

Dry adhesives have attracted much attention because of their repeatable and reversible attachment. Many research groups have made fruitful achievements in fabricating and designing various dry adhesives. However, most of these studies focus on imitating bioinspired geometry to achieve this smart adhesion, neglecting the contact interface control through their peeling motion. Here, we present an alternative design to achieve this switchable adhesion on the basis of controlling contact areas. This unique design includes micropillars array with large overhanging caps and a "step" located at the center line of the cap. When dragging the pillars in the direction of the upper surface of the step, the lower surface is brought into contact, rapidly yielding stronger adhesion (switched-on state). Alternatively, when dragging the pillars in the direction of the lower surface of the step, the contact areas decrease sharply, leading to weak adhesion (switched-off state). Such switchable property under strong adhesion force is exactly what many practical applications need, and the ability to achieve this property by controlling the adhesion area size presented here opens a new way to dry adhesives design.

Step-Controllable Electric-Field-Assisted Nanoimprint Lithography for Uneven Large-Area Substrates.

Large-area nanostructures are widely used in various fields, but fabrication on large-area uneven substrates poses a significant challenge. This study demonstrates a step-controllable electric-field-assisted nanoimprint lithography (e-NIL) method that can achieve conformal contact with uneven substrates for high fidelity nanostructuring. Experiments are used to demonstrate the method where a substrate coated with liquid resist is brought into contact with a flexible template driven by the applied electric field. Theoretical analysis based on the elasticity theory and electro-hydrodynamic theory is carried out. Effective voltage range and the saturation voltage are also discussed. A step-controllable release of flexible template is proposed and demonstrated to ensure the continuous contact between the template and an uneven substrate. This prevents formation of air traps and allows large area conformal contact to be achieved. A combination of Vacuum-electric field assisted step-controllable e-NIL is implemented in the developed prototype. Finally, photonic crystal nanostructures are successfully fabricated on a 4 in., 158 µm bow gallium nitride light-emitting diode epitaxial wafer using the proposed method, which enhance the light extraction property.

Trapping and chaining self-assembly of colloidal polystyrene particles over a floating electrode by using combined induced-charge electroosmosis and attractive dipole-dipole interactions.

We propose a novel low-frequency strategy to trap 10 µm colloidal polystyrene (PS) particles of small buoyancy velocity on the surface of a floating electrode, on the basis of combined induced-charge electroosmotic (ICEO) flow and dipole-dipole chaining phenomenon. For field frequencies of 5-50 Hz, much lower than the reciprocal RC time scale, double-layer polarization makes electric field lines pass around the 'insulating' surface of the ideally polarizable floating electrode. Once the long-range ICEO convective micro-vortexes transport particles quickly from the bulk fluid to the electrode surface, neighbouring particles aligned along the local horizontal electric field attract one another by attractive dipolar interactions, and form arrays of particle chains that are almost parallel with the applied electric field. Most importantly, this low-frequency trapping method takes advantage of the dielectrophoretic (DEP) particle-particle interaction to enhance the downward buoyancy force of this dipolar chaining assembly structure, in order to overcome the upward ICEO fluidic drag and realize stable particle trapping around the flow stagnation region. For the sake of comparison, the field frequency is further raised far above the DC limit. At the intermediate frequencies of 200 Hz-2 kHz, this trapping method fails to work, since the normal electric field component emanates from the conducting electrode surface. Besides, at high field frequencies (>3 kHz), particles can be once again effectively trapped at the electrode center, though with a compact (3 kHz) or disordered (10 kHz) 2D packing state on the electrode surface and mainly governed by the short-range negative DEP force field, resulting in requiring a much longer trapping time. To gain a better interpretation of the various particle behaviours observed in experiments, we develop a theoretical framework that takes into account both Maxwell-Wagner interfacial charge relaxation at the particle/electrolyte interface and the field-induced double-layer polarization at the electrode/electrolyte interface, and apply it to quantify the particle-particle electrokinetic interactions. With this simple geometrical configuration of a floating electrode, our results provide a new way to realize trapping of colloidal particles with a small buoyancy velocity under the combined action of ICEO flow and an attractive dipole-dipole interaction.

A high performance P(VDF-TrFE) nanogenerator with self-connected and vertically integrated fibers by patterned EHD pulling.

Piezoelectricity based energy harvesting from mechanical vibrations has attracted extensive attention for its potential application in powering wireless mobile electronics recently. Here, a patterned electrohydrodynamic (EHD) pulling technology was proposed to fabricate a new self-connected, piezoelectric fiber array vertically integrated P(VDF-TrFE) nanogenerator, with a molecular poling orientation fully aligned to the principal excitation for maximized conversion and a well-bridged electrode pair for efficient charge collection. The nanogenerator is fabricated in a novel way by applying a voltage across an electrode pair sandwiching an air gap and an array of shallow micropillars, during which the EHD force tends to pull the micropillars upward, generating a microfiber array finally in robust contact with the upper electrode. Such a thermoplastic and EHD deformation of the microfibers, featured simultaneously by an electric field and by a microfiber elongation dominantly vertical to the electrode, leads to a poling orientation of P(VDF-TrFE) well coincident with the principal strain for the generator excited by a force normal to the electrodes. The as-prepared piezoelectric device exhibits an enhanced output voltage up to 4.0 V and a current of 2.6 µA, therefore the piezoelectric voltage was enhanced to 5.4 times that from the bulk film. Under periodic mechanical impact, electric signals are repeatedly generated from the device and used to power a seven-segment indicator, RBGY colored light-emitting diodes, and a large-scale liquid crystal display screen. These results not only provide a tool for fabricating 3D piezoelectric polymers but offer a new type of self-connected nanogenerator for the next generation of self-powered electronics.