Prevalence of amyloid in ligamentum flavum of patients with lumbar spinal stenosis.

BACKGROUND: Transthyretin (ATTR) amyloidosis is often diagnosed in an advanced stage, when irreversible cardiac damage has occurred. Lumbar spinal stenosis (LSS) may precede cardiac ATTR amyloidosis by many years, offering the opportunity to detect ATTR already at the time of LSS surgery. We prospectively assessed the prevalence of ATTR in the ligamentum flavum by tissue biopsy in patients aged >50 years undergoing surgery for LSS. METHODS: Ligamentum flavum thickness was assessed pre-operatively on axial T2 magnetic resonance imaging (MRI) slices. Tissue samples from ligamentum flavum were screened centrally by Congo red staining and immunohistochemistry (IHC). RESULTS: Amyloid in the ligamentum flavum was detected in 74/94 patients (78.7%). IHC revealed ATTR in 61 (64.9%), whereas amyloid subtyping was inconclusive in 13 (13.8%). Mean thickness of ligamentum flavum was significantly higher at all levels in patients with amyloid (p < .05). Patients with amyloid deposits were older (73.1 ± 9.2 vs. 64.6 ± 10.1 years, p = .01). No differences in sex, comorbidities, previous surgery for carpal tunnel syndrome or LSS were observed. CONCLUSIONS: Amyloid, mostly of the ATTR subtype, was found in four out of five patients with LSS and is associated with age and ligamentum flavum thickness. Histopathological work-up of ligamentum flavum might inform future decision making.

Percutaneous thoraco-lumbar-sacral pedicle screw placement accuracy results from a multi-center, prospective clinical study using a skin marker-based optical navigation system.

STUDY DESIGN: Prospective multi-center study. OBJECTIVE: The study aimed to evaluate the accuracy of pedicle screw placement using a skin marker-based optical surgical navigation system for minimal invasive thoraco-lumbar-sacral pedicle screw placement. METHODS: The study was performed in a hybrid Operating Room with a video camera-based navigation system integrated in the imaging hardware. The patient was tracked with non-invasive skin markers while the instrument tracking was via an on-shaft optical marker pattern. The screw placement accuracy assessment was performed by three independent reviewers, using the Gertzbein grading. The screw placement time as well as the staff and patient radiation doses was also measured. RESULTS: In total, 211 screws in 39 patients were analyzed for screw placement accuracy. Of these 32.7% were in the thoracic region, 59.7% were in the lumbar region, and 7.6% were in the sacral region. An overall accuracy of 98.1% was achieved. No screws were deemed severely misplaced (Gertzbein grading 3). The average time for screw placement was 6 min and 25 secs (± 3 min 33 secs). The average operator radiation dose per subject was 40.3 µSv. The mean patient effective dose (ED) was 11.94 mSv. CONCLUSION: Skin marker-based ON can be used to achieve very accurate thoracolumbarsacral pedicle screw placements.

Sleep-Related Breathing Disorders in Multiple Sclerosis: Prevalence, Features and Associated Factors.

Background: Multiple sclerosis (MS) represents a risk factor for sleep disorders, but there are conflicting results about the prevalence and severity of sleep-related breathing disorders (SRBD) in MS. Most available data come from self-administered questionnaires. Objective: To conduct a polysomnographic study in MS focused on SRBD, compared to a group of healthy controls (HC), also considering the neuroimaging findings. To evaluate the impact of SRBD on vigilance, fatigue and depression in MS. Methods: In this cross-sectional, observational, instrumental study, 67 MS patients (men/women: 20/47; mean age: 50.6±8.2 years) underwent PSG and maintenance of wakefulness test. Findings were compared to 67 age-, sex-, BMI-matched HC, by using parametric (Student's t-test) and nonparametric statistics (chi-squared test). A subgroup analysis was then performed, evaluating the influence of brainstem (mesencephalic, pontine and medullary) lesions at neuroimaging on instrumental and clinical data: MS patients with at least one brainstem lesion vs MS patients without vs HC. Results: The frequency of SRBD was comparable in MS patients and HC. No MS patient had a central apnea index ≥2/h. The respiratory disturbance index (RDI) did not correlate to clinical parameters such as fatigue and depression. Patients with MS were drowsier than HC (47% vs 26%, p = 0.019) and showed a worse sleep pattern, in terms of duration, efficiency and architecture. Conclusion: Our study does not provide evidence of an association between MS-specific symptoms such as fatigue, sleepiness, depression and central or obstructive apneas, even in the presence of brainstem lesions.

Use of Intraoperative Computed Tomography Improves Outcome of Minimally Invasive Transforaminal Lumbar Interbody Fusion: A Single-Center Retrospective Cohort Study.

OBJECTIVE: To provide data about surgical workflow, accuracy, complications, radiation exposure, and learning curve effect in patients who underwent minimally invasive (MIS) transforaminal lumbar interbody fusion with navigation coupled with mobile intraoperative computed tomography. METHODS: A retrospective analysis was performed of data from consecutive patients who underwent single- or double-level MIS transforaminal lumbar interbody fusion at a single institution; mobile intraoperative computed tomography combined with a navigation system was used as the sole intraoperative imaging method to place pedicular screws; decompression and interbody fusion were performed through a 22-mm tubular retractor. Clinical data, perioperative complications, accuracy of pedicular screw placement, and radiation exposure were analyzed. A learning curve effect on surgical time and accuracy was assessed. RESULTS: A total of 408 screws in 100 patients were analyzed. In all cases, spinal navigation allowed for identification of pedicular trajectories and greatly facilitated nerve root decompression through the MIS approach. Overall accuracy according to Heary classification was 95.3%. Nineteen screws (4.7%) presented a minor lateral breach (<2 mm), not clinically significant. Surgical time, blood loss, and patient radiation exposure compared favorably with reported values from other series using three-dimensional navigation. A learning curve effect on surgical time, but not on screw accuracy, was identified. CONCLUSIONS: MIS transforaminal lumbar interbody fusion can now be performed without any radiation exposure to the surgeon and operating room staff, with almost absolute accuracy during screw positioning and tubular decompression. A learning curve effect on surgical time, but not on overall screw accuracy, may be expected.

The 'armed concrete' approach: stent-screw-assisted internal fixation (SAIF) reconstructs and internally fixates the most severe osteoporotic vertebral fractures.

BACKGROUND: The treatment of severe osteoporotic vertebral compression fractures (VCFs) with middle-column (MC) involvement, high fragmentation, large cleft and/or pedicular fracture is challenging. Minimally invasive 'stent-screw-assisted internal fixation' (SAIF) can reduce the fracture, reconstruct the vertebral body (VB) and fix it to the posterior elements. OBJECTIVE: To assess feasibility, safety, technical and clinical outcome of the SAIF technique in patients with severe osteoporotic VCFs. METHODS: 80 treated vertebrae were analyzed retrospectively. Severe VCFs were characterized by advanced collapse (Genant grade 3), a high degree of osseous fragmentation (McCormack grade 2 and 3), burst morphology with MC injury, pediculo-somatic junction fracture, and/or large osteonecrotic cleft. VB reconstruction was evaluated on postprocedure radiographs and CT scans by two independent raters. Clinical and radiological follow-ups were performed at 1 and 6 months. RESULTS: SAIF was performed at 28 thoracic and 52 lumbar levels in 73 patients. One transient neurological complication occurred. VB reconstruction was satisfactory in 98.8% of levels (inter-rater reliability 96%, κ=1). Follow-up at 1 month was available for 78/80 levels and at 6 months or later (range 6-24, mean 7.9 months) for 73/80 levels. Significant improvement in the Visual Analog Scale score was noted at 1 and 6 months after treatment (p<0.05). Patients reported global clinical benefit during follow-up (Patient's Global Impression of Change Scale 5.6±0.9 at 1 month and 6.1±0.9 at 6 months). Fourteen new painful VCFs occurred at different levels in 11 patients during follow-up, treated with vertebral augmentation or SAIF. Target-level stability was maintained in all cases. CONCLUSIONS: SAIF is a minimally invasive, safe, and effective treatment for patients with severe osteoporotic VCFs with MC involvement.

Use of Intraoperative CT Improves Accuracy of Spinal Navigation During Screw Fixation in Cervico-thoracic Region.

STUDY DESIGN: A retrospective analysis of a single-center consecutive series of patients. OBJECTIVE: To test the hypothesis that using a mobile intraoperative computed tomography in combination with spinal navigation would result in better accuracy of lateral mass and pedicle screws between C3 and T5 levels, compared to cone-beam computed tomography and traditional 2D fluoroscopy. SUMMARY OF BACKGROUND DATA: Use of spinal navigation associated with 3D imaging has been shown to improve accuracy of screw positioning in the cervico-thoracic region. However, use of iCT imaging compared to a cone-beam CT has not been fully investigated in these types of surgical interventions. METHODS: We retrospectively analyzed a series of patients who underwent posterior cervico-thoracic fixations using different intraoperative imaging systems in a single hospital. We identified three different groups of patients: Group A, operated under 2D-fluoroscopic guidance without navigation; Group B: O-arm guidance with navigation; Group C: iCT AIRO guidance with navigation. Primary outcome was the rate of accurately placed screws, measured on intra or postoperative CT scan with Neo et al. classification for cervical pedicles screws and Gertzbein et al. for thoracic pedicle screws. Screws in cervical lateral masses were evaluated according to a new classification created by the authors. RESULTS: Data on 67 patients and 495 screws were available. Overall screw accuracy was 92.8% (95.6% for lateral mass screws, 81.6% for cervical pedicle screws, and 90% for thoracic pedicle screws). Patients operated with iCT AIRO navigation had significantly fewer misplaced screws (2.4%) compared to 2D-fluoroscopic guidance (9.1%) and O-arm navigation (9.7%) (P = 0.0152). Accuracy rate of iCT navigation versus O-arm navigation was significantly higher (P = 0.0042), and there was no statistically significant difference in surgical time between the three Groups (P = 0.5390). CONCLUSION: Use of high-quality CT associated with spinal navigation significantly improved accuracy of screw positioning in the cervico-thoracic region.Level of Evidence: 3.

Stent screw-assisted internal fixation (SAIF): clinical report of a novel approach to stabilizing and internally fixating vertebrae destroyed by malignancy.

OBJECTIVE: Severe lytic cancerous lesions of the spine are associated with significant morbidity and treatment challenges. Stabilization and restoration of the axial load capability of the vertebral body (VB) are important to prevent or arrest vertebral collapse. Percutaneous stent screw-assisted internal fixation (SAIF), which anchors a VB stent/cement complex with pedicular screws to the posterior vertebral elements, is a minimally invasive, image-guided, 360° internal fixation technique that can be utilized in this patient cohort. The purpose of this study was to assess the feasibility, safety, and stabilization efficacy of VB reconstruction via the SAIF technique in a cohort of patients with extensive lytic vertebral lesions, who were considered to have an unstable or potentially unstable spine according to the Spinal Instability Neoplastic Score (SINS). METHODS: This study was a retrospective assessment of a prospectively maintained database of a consecutive series of patients with neoplastic extensive extracompartmental osteolysis (Tomita type 4-6) of the VB treated with the SAIF technique. VB reconstruction was assessed on postprocedure plain radiographs and CT by two independent raters. Technical and clinical complications were recorded. Clinical and imaging follow-ups were assessed. RESULTS: Thirty-five patients with extensive osteolytic metastatic lesions of the VB underwent 36 SAIF procedures. SAIF was performed as a stand-alone procedure in 31/36 cases and was associated with posterior surgical fixation in 5/36 (4/5 with decompressive laminectomy). In 1 case an epidural cement leak required surgical decompression. VB reconstruction was categorized as satisfactory (excellent or good rating) by the two raters in 34/36 cases (94.5%) with an interrater reliability of 94.4% (Cohen's kappa of 0.8). Follow-up, ranging from 1 to 30 months, was available for 30/36 levels. Long-term follow-up (6-30 months, mean 11.5 months) was available for 16/36 levels. Stability during follow-up was noted in 29/30 cases. CONCLUSIONS: SAIF provides 360° nonfusion internal fixation that stabilizes the VB in patients with extensive lytic lesions that would otherwise be challenging to treat.

Stent-Screw Assisted Internal Fixation of Osteoporotic Vertebrae: A Comparative Finite Element Analysis on SAIF Technique.

Vertebral compression fractures are one of the most relevant clinical consequences caused by osteoporosis: one of the most common treatment for such fractures is vertebral augmentation through minimally invasive approaches (vertebroplasty or balloon-kyphoplasty). Unfortunately, these techniques still present drawbacks, such as re-fractures of the treated vertebral body with subsidence of the non-augmented portions or re-fracture of the non-augmented middle column at the junction with the augmented anterior column. A novel minimally-invasive augmentation technique, called Stent-Screw Assisted Internal Fixation, has been recently proposed for the treatment of severe osteoporotic and neoplastic fractures: this technique uses two vertebral body stents and percutaneous cannulated and fenestrated pedicular screws, through which cement is injected inside the expanded stents to achieve optimal stents' and vertebral body's filling. The role of the pedicle screws is to anchor the stents-cement complex to the posterior column, acting as a bridge across the middle column and preserving its integrity from possible collapse. In order to evaluate the potential of the new technique in restoring the load bearing capacity of the anterior and middle spinal columns and in reducing bone strains, a Finite Element model of an osteoporotic lumbar spine has been developed. Both standard vertebroplasty and Stent-Screw Assisted Internal Fixation have been simulated: simulations have been run taking into account everyday activities (standing and flexion) and comparison between the two techniques, in terms of strain distribution on vertebral endplates and posterior and anterior wall, was performed. Results show that Stent-Screw Assisted Internal Fixation significantly decrease the strain distribution on the superior EP and the cortical wall compared to vertebroplasty, possibly reducing the re-fracture risk of the middle-column at the treated level.

Mechanical Cavity Creation with Curettage and Vacuum Suction (Q-VAC) in Lytic Vertebral Body Lesions with Posterior Wall Dehiscence and Epidural Mass before Cement Augmentation.

Background and Objectives: We describe a novel technique for percutaneous tumor debulking and cavity creation in patients with extensive lytic lesions of the vertebral body including posterior wall dehiscence prior to vertebral augmentation (VA) procedures. The mechanical cavity is created with a combination of curettage and vacuum suction (Q-VAC). Balloon kyphoplasty and vertebral body stenting are used to treat neoplastic vertebral lesions and might reduce the rate of cement leakage, especially in presence of posterior wall dehiscence. However, these techniques could theoretically lead to increased intravertebral pressure during balloon inflation with possible mobilization of soft tissue tumor through the posterior wall, aggravation of spinal stenosis, and resultant complications. Creation of a void or cavity prior to balloon expansion and/or cement injection would potentially reduce these risks. Materials and Methods: A curette is coaxially inserted in the vertebral body via transpedicular access trocars. The intravertebral neoplastic soft tissue is fragmented by multiple rotational and translational movements. Subsequently, vacuum aspiration is applied via one of two 10 G cannulas that had been introduced directly into the fragmented lesion, while saline is passively flushed via the contralateral cannula, with lavage of the fragmented solid and fluid-necrotic tumor parts. Results: We applied the Q-VAC technique to 35 cases of thoracic and lumbar extreme osteolysis with epidural mass before vertebral body stenting (VBS) cement augmentation. We observed extravertebral cement leakage on postoperative CT in 34% of cases, but with no clinical consequences. No patients experienced periprocedural respiratory problems or new or worsening neurological deficit. Conclusion: The Q-VAC technique, combining mechanical curettage and vacuum suction, is a safe, inexpensive, and reliable method for percutaneous intravertebral tumor debulking and cavitation prior to VA. We propose the Q-VAC technique for cases with extensive neoplastic osteolysis, especially if cortical boundaries of the posterior wall are dehiscent and an epidural soft tissue mass is present.

Stent Screw-Assisted Internal Fixation (SAIF) of Severe Lytic Spinal Metastases: A Comparative Finite Element Analysis of the SAIF Technique.

OBJECTIVE: A new stent-screw-assisted internal fixation (SAIF) minimally invasive cement-augmentation technique has been introduced to treat patients with extreme osteolytic lesions of the vertebral body. The aim of the current finite element study, employing a spine model with an extreme osteolytic defect, was to assess the effect of the SAIF technique in reducing strains in the vertebral body in comparison with a standard surgical short posterior fixation. METHODS: Different finite element models of a L1-S1 spine were developed, representing an intact condition (reference configuration), an extreme osteolysis condition, and its treatment, respectively with stand-alone SAIF, SAIF and posterior fixation, and with stand-alone posterior fixation. Each model was loaded to reproduce standing and upper body bending. Principal strains were calculated on the superior endplate, anterior and posterior cortical walls. A paired Wilcoxon test with a 0.05 significance level was performed to statistically analyze the results. RESULTS: Median strains on the bony structures increased in the osteolysis model compared with the intact model, and the SAIF technique was effective in reducing such strains under both standing and flexion conditions. Additional posterior fixation, combined with the SAIF technique, produced minimal further reduction of the median strains on the bony structures. Stand-alone posterior fixation only shielded the osteolytic vertebra avoiding excessive displacements but failed in restoring the axial stiffness to values typical of the intact vertebra. CONCLUSIONS: The new SAIF technique resulted effective in restoring the load-bearing capacity of the extensively osteolytic vertebra; additional posterior fixation provided only further minor advantages.

Vertebral body stent augmentation to reconstruct the anterior column in neoplastic extreme osteolysis.

BACKGROUND: Extensive lytic lesions of the vertebral body (VB) increase risk of fracture and instability and require stabilization of the anterior column. Vertebral augmentation is an accepted treatment option, but when osteolysis has extensively destroyed the VB cortical boundaries (a condition herein defined as 'extreme osteolysis'), the risk of cement leakage and/or insufficient filling is high. Vertebral body stents (VBSs) might allow partial restoration of VB height, cement containment, and reinforcement, but their use in extreme osteolysis has not been investigated. OBJECTIVE: To assess retrospectively the feasibility and safety of VBS augmentation in patients with 'extreme osteolysis' of the VB. METHODS: We retrospectively analyzed 41 treated vertebrae (from T1 to L5). VB reconstruction was assessed on postprocedure CT images and rated on a qualitative 4-point scale (poor-fair-good-excellent). Clinical and radiological follow-up was performed at 1 month and thereafter at intervals in accordance with oncological protocols. RESULTS: VBS augmentation was performed at 12 lumbar and 29 thoracic levels, with bilateral VBS in 23/41. VB reconstruction was judged satisfactory (good or excellent) in 37/41 (90%) of levels. Bilateral VBS received higher scores than unilateral (p=0.057, Pearson's X2). We observed no periprocedural complications. Cement leaks (epidural or foraminal) occurred at 5/41 levels (12.2%) without clinical consequences. Follow-up data were available for 27/29 patients, extending beyond 6 months for 20 patients (7-28 months, mean 15.3 months). VBS implant stability was observed in 40/41 cases (97.5%). CONCLUSIONS: Our results support the use of VBS as a minimally invasive, safe and effective option for reconstructing the anterior column in prominent VB osteolysis.

Stent-screw-assisted internal fixation: the SAIF technique to augment severe osteoporotic and neoplastic vertebral body fractures.

OBJECTIVES: To describe a new technique to obtain minimally invasive but efficient vertebral body (VB) reconstruction, augmentation, and stabilization in severe osteoporotic and neoplastic fractures, combining two pre-existing procedures. The implant of vertebral body stents (VBS) is followed by insertion of percutaneous, fenestrated, cement-augmented pedicular screws that act as anchors to the posterior elements for the cement/stent complex. The screws reduce the risk of stent mobilization in a non-intact VB cortical shell and bridge middle column and pedicular fractures. This procedure results in a 360° non-fusion form of vertebral internal fixation that may empower vertebral augmentation and potentially avoid corpectomy in challenging fractures. PROCEDURE DETAILS: This report provides step-by-step procedural details, rationale, and proposed indications for this procedure. The procedure is entirely percutaneous under fluoroscopic guidance. Through transpedicular trocars the VBS are inserted, balloon-expanded and implanted in the VB. Over k-wire exchange the transpedicular screws are inserted inside the lumen of the stents and cement is injected through the screws to augment the stents and fuse the screws to the stents. APPLICATIONS: This technique may find appropriate applications for the most severe osteoporotic fractures with large clefts, high-degree fragmentation and collapse, middle column and pedicular involvement, and in extensive neoplastic lytic lesions. CONCLUSIONS: Stent-Screw-Assisted Internal Fixation (SAIF) might represent a minimally invasive option to obtain VB reconstruction and restoration of axial load capability in severe osteoporotic and neoplastic fractures, potentially obviating the need for more invasive surgical interventions in situations that would pose significant challenges to standard vertebroplasty or balloon kyphoplasty.

Use of the Airo mobile intraoperative CT system versus the O-arm for transpedicular screw fixation in the thoracic and lumbar spine: a retrospective cohort study of 263 patients.

OBJECTIVE: Navigation-enabling technology such as 3D-platform (O-arm) or intraoperative mobile CT (iCT-Airo) systems for use in spinal surgery has considerably improved accuracy over that of traditional fluoroscopy-guided techniques during pedicular screw positioning. In this study, the authors compared 2 intraoperative imaging systems with navigation, available in their neurosurgical unit, in terms of the accuracy they provided for transpedicular screw fixation in the thoracic and lumbar spine. METHODS: The authors performed a retrospective analysis of clinical and surgical data of 263 consecutive patients who underwent thoracic and lumbar spine screw placement in the same center. Data on 97 patients who underwent surgery with iCT-Airo navigation (iCT-Airo group) and 166 with O-arm navigation (O-arm group) were analyzed. Most patients underwent surgery for a degenerative or traumatic condition that involved thoracic and lumbar pedicle screw fixation using an open or percutaneous technique. The primary endpoint was the proportion of patients with at least 1 screw not correctly positioned according to the last intraoperative image. Secondary endpoints were the proportion of screws that were repositioned during surgery, the proportion of patients with a postoperative complication related to screw malposition, surgical time, and radiation exposure. A blinded radiologist graded screw positions in the last intraoperative image according to the Heary classification (grade 1-3 screws were considered correctly placed). RESULTS: A total of 1361 screws placed in 97 patients in the iCT-Airo group (503 screws) and in 166 in the O-arm group (858 screws) were graded. Of those screws, 3 (0.6%) in the iCT-Airo group and 4 (0.5%) in the O-arm group were misplaced. No statistically significant difference in final accuracy between these 2 groups or in the subpopulation of patients who underwent percutaneous surgery was found. Three patients in the iCT-Airo group (3.1%, 95% CI 0%-6.9%) and 3 in the O-arm group (1.8%, 95% CI 0%-4.0%) had a misplaced screw (Heary grade 4 or 5). Seven (1.4%) screws in the iCT-Airo group and 37 (4.3%) in the O-arm group were repositioned intraoperatively (p = 0.003). One patient in the iCT-Airo group and 2 in the O-arm group experienced postoperative neurological deficits related to hardware malposition. The mean surgical times in both groups were similar (276 [iCT-Airo] and 279 [O-arm] minutes). The mean exposure to radiation in the iCT-Airo group was significantly lower than that in the O-arm group (15.82 vs 19.12 mSv, respectively; p = 0.02). CONCLUSIONS: Introduction of a mobile CT scanner reduced the rate of screw repositioning, which enhanced patient safety and diminished radiation exposure for patients, but it did not improve overall accuracy compared to that of a mobile 3D platform.

Magnetic resonance imaging features in triple-negative breast cancer: comparison with luminal and HER2-overexpressing tumors.

BACKGROUND: It has been ascertained that triple-negative (TN) breast cancer is characterized by an aggressive clinical course and a poor prognosis. The purpose of our study was to compare the magnetic resonance imaging (MRI) features of the 3 major different breast cancer subtypes (TN, luminal, and human epidermal growth factor receptor 2 [HER2]-overexpressing) and to suggest the criteria that might predict TN phenotype. MATERIALS AND METHODS: From October 2007 to April 2011, we studied 77 patients with histologically confirmed TN breast cancer who underwent breast MRI. We randomly included 148 patients with non-TN breast cancer (110 luminal and 38 HER-overexpressing) as a control group. We evaluated the clinicopathologic data, the MRI morphologic and kinetic features, the signal intensity on T2-weighted images, and the apparent diffusion coefficient (ADC). RESULTS: Our results confirmed that TN tumors are more aggressive, are usually diagnosed at a younger age compared with the other study groups, and show benign morphologic features with MRI. Backward stepwise logistic regression identified some parameters as independent predictors of TN-type lesions: age, size, shape, presence of edema, and infiltrative characteristics. The receiver operating characteristic (ROC) curve, built with 4 of 5 these factors as criteria to predict TN status, showed a 0.664 area under the curve (AUC) value (sensitivity 58.4%, specificity 73.2%). The inclusion of the fifth criterion showed a 0.699 AUC value (sensitivity, 49.4%; specificity, 89.4%). CONCLUSION: We identified the clinicoradiologic parameters that are independent predictors of TN breast lesions, which might be helpful for earlier prediction of the TN status of a breast lesion.

Percutaneous cement augmentation of a lytic lesion of C1 via posterolateral approach under CT guidance.

BACKGROUND CONTEXT: Percutaneous vertebroplasty (PV) can provide pain relief and biomechanical stabilization of lytic metastasis of the spine in selected patients. Percutaneous vertebroplasty of the atlas has been reported in only five cases and has been performed with different techniques and approaches. PURPOSE: To describe the technique we used to perform PV of a lytic lesion of the lateral mass of C1 under computed tomography, computed tomography angiography, and computed tomography fluoroscopy guidance with a posterolateral approach, sparing the vertebral artery (VA). STUDY DESIGN/SETTING: Technical note. METHODS: A 36-year-old woman with a history of intestinal carcinoid tumor presented with neck pain refractory to medical treatment. Radiological evaluation showed osteolytic destruction of the left lateral mass of the atlas, at the risk of collapse, with erosion of the VA canal. Under computed tomography and computed tomography angiography guidance, a percutaneous posterolateral oblique approach to the C1 left lateral mass was performed followed by cement augmentation under computed tomography fluoroscopy control. RESULTS: Complete cement filling of the osteolytic lesion was achieved. A cement leak was noted along the horizontal V3 segment of the left VA. Computed tomography angiography scan showed patency of the VA after the procedure. There were no clinical complications. The patient reported substantial pain relief and improved range of motion at 12 hours postprocedure, which remained stable at 2-month follow-up examination. CONCLUSIONS: Computed tomography-guided PV of C1 lytic lesion with posterolateral approach was effective in the described case for pain control and stabilization, and it may be a therapeutic option in selected patients to avoid occipitocervical fusion. This procedure requires good understanding of the anatomy and rigorous technique to avoid potential complications.

DWI in breast MRI: role of ADC value to determine diagnosis between recurrent tumor and surgical scar in operated patients.

INTRODUCTION: Purpose of our study is to evaluate the role of the apparent diffusion coefficient (ADC) in the diagnosis of recurrent tumor on the scar in patients operated for breast cancer. Assess, therefore, the weight of diagnostic diffusion echo-planar sequence, in association with the morphological and dynamic sequences in the diagnosis of tumor recurrence versus surgical scar. MATERIALS AND METHODS: From September 2007 to March 2009, 72 patients operated for breast cancer with suspected recurrence on the scar were consecutively subjected to magnetic resonance imaging (MRI), including use of a diffusion sequence. All patients with pathological enhancement in the scar were then subjected to histological typing. MRI was considered negative in the absence of areas of suspicious enhancement. In all cases it was measured the ADC value in the scar area or in the area with pathological enhancement. The ADC values were compared with MRI findings and histological results obtained. RESULTS: 26 cases were positive/doubtful at MRI and then subjected to histological typing: of these recurrences were 20 and benign were 6. 46 cases were judged negative at MRI and therefore not sent to cyto-histology. The average ADC value of recurrences was statistically lower of scarring (p<0.001). CONCLUSIONS: ADC value can be a specific parameter in differential diagnosis between recurrence and scar. The diffusion sequence, in association with the morphological and dynamic sequences, can be considered a promising tool for the surgical indication in suspected recurrence of breast cancer.