Controlling jumps through latches in small jumping robots.

Small jumping robots can use springs to maximize jump performance, but they are typically not able to control the height of each jump owing to design constraints. This study explores the use of the jumper's latch, the component that mediates the release of energy stored in the spring, as a tool for controlling jumps. A reduced-order model that considers the dynamics of the actuator pulling the latch and the effect of spring force on the latch is presented. This model is then validated using high speed video and ground reaction force measurements from a 4gjumper. Both the model and experimental results demonstrate that jump performance in small insect-inspired resource-constrained robots can be tuned to a range of outputs using latch mediation, despite starting with a fixed spring potential energy. For a fixed set of input voltages to the latch actuator, the results also show that a jumper with a larger latch radius has greater tunability. However, this greater tunability comes with a trade-off in maximum performance. Finally, we define a new metric, 'Tunability Range,' to capture the range of controllable jump behaviors that a jumper with a fixed spring compression can attain given a set of control inputs (i.e. latch actuation voltage) to choose from.

Adapting small jumping robots to compliant environments.

Jumping animals launch themselves from surfaces that vary widely in compliance from grasses and shrubs to tree branches. However, studies of robotic jumpers have been largely limited to those jumping from rigid substrates. In this paper, we leverage recent work describing how latches in jumping systems can mediate the transition from stored potential energy to kinetic energy. By including a description of the latch in our system model of both the jumper and compliant substrate, we can describe conditions in which a jumper can either lose energy to the substrate or recover energy from the substrate resulting in an improved jump performance. Using our mathematical model, we illustrate how the latch plays a role in the ability of a system to adapt its jump performance to a wide range of substrates that vary in their compliance. Our modelling results are validated using a 4 g jumper with a range of latch designs jumping from substrates with varying mass and compliance. Finally, we demonstrate the jumper recovering energy from a tree branch during take-off, extending these mechanistic findings to robots interacting with a more natural environment.

Latch-based control of energy output in spring actuated systems.

The inherent force-velocity trade-off of muscles and motors can be overcome by instead loading and releasing energy in springs to power extreme movements. A key component of this paradigm is the latch that mediates the release of spring energy to power the motion. Latches have traditionally been considered as switches; they maintain spring compression in one state and allow the spring to release energy without constraint in the other. Using a mathematical model of a simplified contact latch, we reproduce this instantaneous release behaviour and also demonstrate that changing latch parameters (latch release velocity and radius) can reduce and delay the energy released by the spring. We identify a critical threshold between instantaneous and delayed release that depends on the latch, spring, and mass of the system. Systems with stiff springs and small mass can attain a wide range of output performance, including instantaneous behaviour, by changing latch release velocity. We validate this model in both a physical experiment as well as with data from the Dracula ant, Mystrium camillae, and propose that latch release velocity can be used in both engineering and biological systems to control energy output.