Natural Cellulose Fiber-Derived Photothermal Aerogel for Efficient and Sustainable Solar Desalination.

Aerogels are becoming a promising platform to fabricate photothermal materials for use in solar steam generation (SSG), which have remarkable application potential in solar desalination, due to their excellent thermal management, salt resistance, and considerable water evaporation rate. In this work, a novel photothermal material is fabricated by forming a suspension between sugarcane bagasse fibers (SBF) and poly(vinyl alcohol), tannic acid (TA), and Fe3+ solutions via hydrogen bonds of hydroxyl groups. After freeze drying, the fabricated SBF aerogel-based photothermal (SBFAP) material possesses a 3D interconnected porous microstructure, which could enhance water transportation ability, reduce thermal conductivity, and quickly dissolve salt crystals on the SBFAP surface. Thanks to the formation of micro/nanosized complexes between TA and Fe3+ ions on the SBFAP material, the SBFAP exhibits high light capture and water evaporation rate (2.28 kg m-2 h-1). In particular, due to strong hydrogen bonding and the SBF, the SBFAP material is reinforced, thereby exhibiting excellent structural stability in seawater. Moreover, the high salt tolerance of SBFAP favors its high desalination performance for at least 76 days of continuous evaporation under actual conditions. This research paves the way for the fabrication of natural cellulose fiber-based photothermal materials for application in solar desalination.

Simultaneous precipitation and discharge plasma processing for one-step synthesis of α-Fe2O3-Fe3O4/graphene visible light magnetically separable photocatalysts.

A novel facile combination of precipitation and plasma discharge reaction is successfully employed for one-step synthesis of an α-Fe2O3-Fe3O4 graphene nanocomposite (GFs). The co-existence and anchoring of hematite (α-Fe2O3) and magnetite (Fe3O4) nanoparticles onto a graphene sheet in the as synthesized GFs were verified by results of XRD, Raman, SEM, TEM, and XPS. HRTEM characterization was used for confirming the bonding between α-Fe2O3/Fe3O4 nanoparticles and the graphene sheet. Consequently, GFs shows superior photodegrading performance towards methylene blue (MB), compared to individual α-Fe2O3/Fe3O4 nanoparticles, as a result of band gap narrowing and the electron-hole pair recombination rate reducing. Moreover, GFs allows a good possibility of separating and recycling under an external-magnetic field, suggesting potential in visible-light-promoted photocatalytic applications.

Fe-Doped g-C3N4: High-Performance Photocatalysts in Rhodamine B Decomposition.

Herein, Fe-doped C3N4 high-performance photocatalysts, synthesized by a facile and cost effective heat stirring method, were investigated systematically using powder X-ray diffraction (XRD), Fourier transform infrared (FTIR), scanning electron microscopy (SEM) and Brunauer-Emmett-Teller (BET) surface area measurement, X-ray photoelectron (XPS), UV-Vis diffusion reflectance (DRS) and photoluminescence (PL) spectroscopy. The results showed that Fe ions incorporated into a g-C3N4 nanosheet in both +3 and +2 oxidation states and in interstitial configuration. Absorption edge shifted slightly toward the red light along with an increase of absorbance in the wavelength range of 430-570 nm. Specific surface area increased with the incorporation of Fe into g-C3N4 lattice, reaching the highest value at the sample doped with 7 mol% Fe (FeCN7). A sharp decrease in PL intensity with increasing Fe content is an indirect evidence showing that electron-hole pair recombination rate decreased. Interestingly, Fe-doped g-C3N4 nanosheets present a superior photocatalytic activity compared to pure g-C3N4 in decomposing RhB solution. FeCN7 sample exhibits the highest photocatalytic efficiency, decomposing almost completely RhB 10 ppm solution after 30 min of xenon lamp illumination with a reaction rate approximately ten times greater than that of pure g-C3N4 nanosheet. This is in an agreement with the BET measurement and photoluminescence result which shows that FeCN7 possesses the largest specific surface area and low electron-hole recombination rate. The mechanism of photocatalytic enhancement is mainly explained through the charge transfer processes related to Fe2+/Fe3+ impurity in g-C3N4 crystal lattice.

Controllable movement of single-photon source in multifunctional magneto-photonic structures.

Quantum dot (QD) coupling in nanophotonics has been widely studied for various potential applications in quantum technologies. Micro-machining has also attracted substantial research interest due to its capacity to use miniature robotic tools to make precise controlled movements. In this work, we combine fluorescent QDs and magnetic nanoparticles (NPs) to realize multifunctional microrobotic structures and demonstrate the manipulation of a coupled single-photon source (SPS) in 3D space via an external magnetic field. By employing the low one photon absorption (LOPA) direct laser writing (DLW) technique, the fabrication of 2D and 3D magneto-photonic devices containing a single QD is performed on a hybrid material consisting of colloidal CdSe/CdS QDs, magnetite Fe3O4 NPs, and SU-8 photoresist. Two types of devices, contact-free and in-contact structures, are investigated to demonstrate their magnetic and photoradiative responses. The coupled SPS in the devices is driven by the external magnetic field to perform different movements in a 3D fluidic environment. The optical properties of the single QD in the devices are characterized.

Two-Dimensional Clusters of Colloidal Particles Induced by Emulsion Droplet Evaporation.

The minimization principle of the second moment of the mass distribution ( M 2 ) is responsible for the unique structure of three-dimensional clusters by using emulsion droplet evaporation. Herein we study the structure of two-dimensional clusters of colloidal particles bound at the interface of liquid droplets in the plane. We found that, differently from the three-dimensional system, the two-dimensional clusters have multiple degenerate configurations (isomers). An interesting feature of such two-dimensional clusters is that they have the same packings as those belonging to a class of geometric figures known as polyiamonds. In particular, except for the six-particle cluster, many higher order clusters of polyiamond have not been reported previously. Using a simple geometrical approach, based on the number of ways to generate a packing, we calculated the occupation probabilities of distinct isomeric clusters. The level of agreement with the results of metropolis Monte Carlo simulations was good for clusters containing up to nine particles, suggesting that our two-dimensional cluster structures are not a result of the minimization of the second moment. In addition, the structure of these clusters is somewhat insensitive to the range and depth of the interparticle potential, in good agreement with the results in the literature.

Enhancement of Rhodamine B Degradation by Ag Nanoclusters-Loaded g-C3N4 Nanosheets.

In this paper, silver (Ag) nanoclusters-loaded graphitic carbon nitride (g-C3N4) nanosheets are synthesized and their physical properties as well as photocatalytic activities are systematically investigated by different techniques. The existence of Ag atoms in the form of nanoclusters (NCs) rather than well-crystallized nanoparticles are evidenced by X-ray diffraction patterns, SEM images, and XPS spectra. The deposition of Ag nanoclusters on the surface of g-C3N4 nanosheets affect the crystal structure and slightly reduce the band gap energy of g-C3N4. The sharp decrease of photoluminescence intensity indicates that g-C3N4/Ag heterojunctions successfully prevent the recombination of photo-generated electrons and holes. The photocatalytic activities of as-synthesized photocatalysts are demonstrated through the degradation of rhodamine B (RhB) solutions under Xenon lamp irradiation. It is demonstrated that the photocatalytic activity depends strongly on the molar concentration of Ag⁺ in the starting solution. The g-C3N4/Ag heterojunctions prepared from 0.01 M of Ag⁺ starting solution exhibit the highest photocatalytic efficiency and allow 100% degradation of RhB after being exposed for 60 min under a Xenon lamp irradiation, which is four times faster than that of pure g-C3N4 nanosheets.

Direct Laser Writing of Magneto-Photonic Sub-Microstructures for Prospective Applications in Biomedical Engineering.

We report on the fabrication of desired magneto-photonic devices by a low one-photon absorption (LOPA) direct laser writing (DLW) technique on a photocurable nanocomposite consisting of magnetite ( Fe 3 O 4 ) nanoparticles and a commercial SU-8 photoresist. The magnetic nanocomposite was synthesized by mixing Fe 3 O 4 nanoparticles with different kinds of SU-8 photoresists. We demonstrated that the degree of dispersion of Fe 3 O 4 nanoparticles in the nanocomposite depended on the concentration of Fe 3 O 4 nanoparticles, the viscosity of SU-8 resist, and the mixing time. By tuning these parameters, the most homogeneous magnetic nanocomposite was obtained with a concentration of about 2 wt % of Fe 3 O 4 nanoparticles in SU-8 2005 photoresist for the mixing time of 20 days. The LOPA-based DLW technique was employed to fabricate on demand various magneto-photonic submicrometer structures, which are similar to those obtained without Fe 3 O 4 nanoparticles. The magneto-photonic 2D and 3D structures with sizes as small as 150 nm were created. We demonstrated the strong magnetic field responses of the magneto-photonic nanostructures and their use as micro-actuators when immersed in a liquid solution.

Fabrication of three-dimensional polymer quadratic nonlinear grating structures by layer-by-layer direct laser writing technique.

We demonstrate the fabrication of a three-dimensional (3D) polymer quadratic nonlinear (χ(2)) grating structure. By performing layer-by-layer direct laser writing (DLW) and spin-coating approaches, desired photobleached grating patterns were embedded in the guest-host dispersed-red-1/poly(methylmethacrylate) (DR1/PMMA) active layers of an active-passive alternative multilayer structure through photobleaching of DR1 molecules. Polyvinyl-alcohol and SU8 thin films were deposited between DR1/PMMA layers serving as a passive layer to separate DR1/PMMA active layers. After applying the corona electric field poling to the multilayer structure, nonbleached DR1 molecules in the active layers formed polar distribution, and a 3D χ(2) grating structure was obtained. The χ(2) grating structures at different DR1/PMMA nonlinear layers were mapped by laser scanning second harmonic (SH) microscopy, and no cross talk was observed between SH images obtained from neighboring nonlinear layers. The layer-by-layer DLW technique is favorable to fabricating hierarchical 3D polymer nonlinear structures for optoelectronic applications with flexible structural design.

Fabrication of ellipticity-controlled microlens arrays by controlling the parameters of the multiple-exposure two-beam interference technique.

We demonstrate a promising method for fabrication of plastic microlens arrays (MLAs) with a controllable ellipticity and structure, by using the combination of multiple-exposure two-beam interference and plastic replication techniques. Multiple exposures of a two-beam interference pattern with a wavelength of 442 nm into a thick positive photoresist (AZ-4620) were used to form different two-dimensional periodic structures. Thanks to the developing effect of the positive photoresist, fabricated structures consisting of hemielliptical- or hemispherical-shaped concave holes were obtained. By controlling the rotation angle between different exposures, both the shape and structure of the holes varied. By adjusting the dosage ratio between different exposures, the shape of the holes was modified while the structure of the holes was unchanged. The photoresist concave microstructures were then transferred to plastic MLAs by employing replication and embossing techniques. The fabricated MLAs were characterized by a scanning electron microscope and atomic force microscope measurements. We show that the ellipticity of the microlenses can be well controlled from 0 (hemispherical) to 0.96 (hemielliptical) by changing the rotation angle or dosage ratio between the two exposures.

Fabrication of microlens arrays based on the mass transport effect of SU-8 photoresist using a multiexposure two-beam interference technique.

Microlens arrays (MLAs) were fabricated based on the mass transport effect of SU-8 photoresist by a multiexposure two-beam interference technique. In particular, a direct single-step fabrication process, i.e., without developing, mask, and pattern transferring processes, is demonstrated. The effects of various parameters such as thicknesses, exposure dosage, and angle between two laser beams on MLAs were investigated. Square and hexagonal lattices of microlenses were obtained by controlling rotation angles between different exposures on SU-8 samples. In addition, microlenses with elliptical shape were fabricated by a double exposure at 0 degrees and 60 degrees. Finally, the surface profiles of microlenses in MLAs were characterized by atomic force microscopy.

Fabrication of periodic nanovein structures by holography lithography technique.

This work demonstrates a promising method to fabricate periodic nanovein structures, which can be served as templates for fabricating photonic crystals possessing a large complete photonic bandgap. First, the fabrication of a one-dimensional grating structure connected with nanolines is demonstrated by controlling the exposure dosage of the second exposure of the two-exposure two-beam interference technique. Secondly, by using the same interference technique but setting each exposure under the same exposure dosage, two-dimensional periodic structures with nanovein connections were fabricated. These structures were obtained by using either a pure negative photoresist with very low concentration of photoinitiator or a mixing of a negative and a positive photoresists. The fabricated structures are not, as usual, a duplication of the interference pattern but are constituted by square or triangular rods connecting with narrow veins. They can be used as templates for fabricating photonic crystals with very large complete photonic bandgap.