Zn-doped MnOx nanowires displaying plentiful crystalline defects and tunable small cross-sections for an optimized volcano-type performance towards supercapacitors.

MnOx-based nanomaterials are promising large-scale electrochemical energy storage devices due to their high specific capacity, low toxicity, and low cost. However, their slow diffusion kinetics is still challenging, restricting practical applications. Here, a one-pot and straightforward method was reported to produce Zn-doped MnOx nanowires with abundant defects and tunable small cross-sections, exhibiting an outstanding specific capacitance. More specifically, based on a facile hydrothermal strategy, zinc sites could be uniformly dispersed in the α-MnOx nanowires structure as a function of composition (0.3, 2.1, 4.3, and 7.6 wt.% Zn). Such a process avoided the formation of different crystalline phases during the synthesis. The reproducible method afforded uniform nanowires, in which the size of cross-sections decreased with the increase of Zn composition. Surprisingly, we found a volcano-type relationship between the storage performance and the Zn loading. In this case, we demonstrated that the highest performance material could be achieved by incorporating 2.1 wt.% Zn, exhibiting a remarkable specific capacitance of 1082.2 F.g-1 at a charge/discharge current density of 1.0 A g-1 in a 2.0 mol L-1 KOH electrolyte. The optimized material also afforded improved results for hybrid supercapacitors. Thus, the results presented herein shed new insights into preparing defective and controlled nanomaterials by a simple one-step method for energy storage applications.

Multifunctional Hybrid MoS2-PEGylated/Au Nanostructures with Potential Theranostic Applications in Biomedicine.

In this work, flower-like molybdenum disulfide (MoS2) microspheres were produced with polyethylene glycol (PEG) to form MoS2-PEG. Likewise, gold nanoparticles (AuNPs) were added to form MoS2-PEG/Au to investigate its potential application as a theranostic nanomaterial. These nanomaterials were fully characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), photoelectron X-ray spectroscopy (XPS), Fourier-transformed infrared spectroscopy (FTIR), cyclic voltammetry and impedance spectroscopy. The produced hierarchical MoS2-PEG/Au microstructures showed an average diameter of 400 nm containing distributed gold nanoparticles, with great cellular viability on tumoral and non-tumoral cells. This aspect makes them with multifunctional characteristics with potential application for cancer diagnosis and therapy. Through the complete morphological and physicochemical characterization, it was possible to observe that both MoS2-PEG and MoS2-PEG/Au showed good chemical stability and demonstrated noninterference in the pattern of the cell nucleus, as well. Thus, our results suggest the possible application of these hybrid nanomaterials can be immensely explored for theranostic proposals in biomedicine.

A black phosphorus-based cathode for aqueous Na-ion batteries operating under ambient conditions.

We present the unprecedented application of a black phosphorus-based nanocomposite as an electrode for aqueous Na-ion batteries under ambient conditions. An impressive specific capacity of up to 200 mA h g-1 was reached after 50 cycles in a NaCl aqueous solution used as a supporting electrolyte. Post-characterization indicated the integrity of the black phosphorus.

Real-time optofluidic surface-enhanced Raman spectroscopy based on a graphene oxide/gold nanorod nanocomposite.

We demonstrate a glass microcapillary fiber as an optofluidic platform for surface enhanced Raman spectroscopy (SERS), the inner walls of which are coated with a graphene oxide (GO)/gold nanorod (AuNR) nanocomposite. A simple thermal method is used for the coating, allowing for the continuous deposition of the nanocomposite without surface functionalization. We show that the AuNRs can be directly and nondestructively identified on the GO inside the capillaries via identification of the Au-Br SERS peak, as Br- ions from the AuNR synthesis remain on their surface. The coated microcapillary platform is, then, used as a stable SERS substrate for the detection of Rhodamine 6G (R6G) and Rhodamine 640 (RH640) at concentrations down to 10-7 and 10-9 M, respectively. As the required sample volumes are as low as a few hundred nanoliters, down to ~75 femtograms of analyte can be detected. The fiber also allows for the detection of the molecules at acquisition times as low as 0.05 s, indicating the platform's suitability for real-time sensing.

Air stable black phosphorous in polyaniline-based nanocomposite.

The greatest challenge regarding black phosphorus (BP) comes as a result of its fast degradation when exposed to ambient conditions, which has overshadowed its applications. Herein, we report a simple and efficient route towards overcoming BP deterioration by preparing a nanocomposite with the conducting polymer polyaniline (PANI). The liquid/liquid interfacial method was employed to produce transparent, freestanding and transferable thin film of BP covered by PANI, with high stability under ambient atmosphere, up to 60 days. Otherwise, the uncapped exfoliated neat BP degraded in solely 3 days under the same conditions. Characterization data show that PANI covers efficiently the BP flakes, indicating favorable interactions between the components. The results presented here can be considered a breakthrough for employing BP as thin film in different technological applications, considering the properties of BP itself or taking advantage of synergistically combining the properties of both components.

pKa determination of graphene-like materials: Validating chemical functionalization.

We report a novel pKa determination for different graphene-like samples: graphene oxide (GO), reduced GO (rGO), graphene nanoribbons (GNR), oxidized GNR (GONR), thiol- and imidazole-functionalized GO (GOSH and GOIMZ, respectively) and thiol-functionalized GONR (GONRSH). Using the specialized computational program BEST7 for treating titration curves, pKas for different functional groups were discriminated (confirmed by infrared spectra) and their composition quantified. Overall, three equilibria were distinguished, two relative to carboxylic acids exhibiting different acidic degrees (pKa1∼4.0 and pKa2∼6.0) and one relative to alcohols (pKa4∼10.0). Upon functionalization on carboxylate sites, thiol (pKa(GOSH/GONRSH)=6.7) and imidazole (pKa(GOIMZ)=6.6) moieties were discerned, followed by a decrease of their carboxylate percentage (compared to the precursors), thus allowing determining the degree of functionalization (48% and 36% of thiol content for GOSH and GONRSH respectively, and 29% of imidazole for GOIMZ). The proposed method is innovative and simpler when compared to the traditional tools usually employed to quantify chemical functionalization.

Probing the Catalytic Activity of Reduced Graphene Oxide Decorated with Au Nanoparticles Triggered by Visible Light.

Hybrid materials in which reduced graphene oxide (rGO) is decorated with Au nanoparticles (rGO-Au NPs) were obtained by the in situ reduction of GO and AuCl4(-)(aq) by ascorbic acid. On laser excitation, rGO could be oxidized as a result of the surface plasmon resonance (SPR) excitation in the Au NPs, which generates activated O2 through the transfer of SPR-excited hot electrons to O2 molecules adsorbed from air. The SPR-mediated catalytic oxidation of p-aminothiophenol (PATP) to p,p'-dimercaptoazobenzene (DMAB) was then employed as a model reaction to probe the effect of rGO as a support for Au NPs on their SPR-mediated catalytic activities. The increased conversion of PATP to DMAB relative to individual Au NPs indicated that charge-transfer processes from rGO to Au took place and contributed to improved SPR-mediated activity. Since the transfer of electrons from Au to adsorbed O2 molecules is the crucial step for PATP oxidation, in addition to the SPR-excited hot electrons of Au NPs, the transfer of electrons from rGO to Au contributed to increasing the electron density of Au above the Fermi level and thus the Au-to-O2 charge-transfer process.

Theoretical Design and Experimental Realization of Quasi Single Electron Enhancement in Plasmonic Catalysis.

By a combination of theoretical and experimental design, we probed the effect of a quasi-single electron on the surface plasmon resonance (SPR)-mediated catalytic activities of Ag nanoparticles. Specifically, we started by theoretically investigating how the E-field distribution around the surface of a Ag nanosphere was influenced by static electric field induced by one, two, or three extra fixed electrons embedded in graphene oxide (GO) next to the Ag nanosphere. We found that the presence of the extra electron(s) changed the E-field distributions and led to higher electric field intensities. Then, we experimentally observed that a quasi-single electron trapped at the interface between GO and Ag NPs in Ag NPs supported on graphene oxide (GO-Ag NPs) led to higher catalytic activities as compared to Ag and GO-Ag NPs without electrons trapped at the interface, representing the first observation of catalytic enhancement promoted by a quasi-single electron.

Functionalized graphene oxide as a nanocatalyst in dephosphorylation reactions: pursuing artificial enzymes.

The present study reports for the first time the use of a thiol-functionalized graphene oxide nanocatalyst with impressive activity (>10(5)-fold) in dephosphorylation reactions. The innovative and recyclable nanocatalyst has potential in designing artificial enzymes with targeted multifunctionalities and in detoxification of organophosphorus agents.

Reduced graphene oxide/copper nanowire hybrid films as high-performance transparent electrodes.

Hybrid films composed of reduced graphene oxide (RG-O) and Cu nanowires (NWs) were prepared. Compared to Cu NW films, the RG-O/Cu NW hybrid films have improved electrical conductivity, oxidation resistance, substrate adhesion, and stability in harsh environments. The RG-O/Cu NW films were used as transparent electrodes in Prussian blue (PB)-based electrochromic devices where they performed significantly better than pure Cu NW films.

Transparent and conductive thin films of graphene/polyaniline nanocomposites prepared through interfacial polymerization.

This communication reports a simple, one-pot procedure for the synthesis and processing of transparent and conductive thin films of graphene/polyaniline nanocomposites based on an interfacial polymerization. Thin films presenting transmittance of 89% and sheet resistance of 60.6 Ω sq(-1) are spontaneously obtained and can be easily transferred to suitable substrates.