The enhanced connectivity between the frontoparietal, somatomotor network and thalamus as the most significant network changes of chronic low back pain.

The prolonged duration of chronic low back pain (cLBP) inevitably leads to changes in the cognitive, attentional, sensory and emotional processing brain regions. Currently, it remains unclear how these alterations are manifested in the interplay between brain functional and structural networks. This study aimed to predict the Oswestry Disability Index (ODI) in cLBP patients using multimodal brain magnetic resonance imaging (MRI) data and identified the most significant features within the multimodal networks to aid in distinguishing patients from healthy controls (HCs). We constructed dynamic functional connectivity (dFC) and structural connectivity (SC) networks for all participants (n = 112) and employed the Connectome-based Predictive Modeling (CPM) approach to predict ODI scores, utilizing various feature selection thresholds to identify the most significant network change features in dFC and SC outcomes. Subsequently, we utilized these significant features for optimal classifier selection and the integration of multimodal features. The results revealed enhanced connectivity among the frontoparietal network (FPN), somatomotor network (SMN) and thalamus in cLBP patients compared to HCs. The thalamus transmits pain-related sensations and emotions to the cortical areas through the dorsolateral prefrontal cortex (dlPFC) and primary somatosensory cortex (SI), leading to alterations in whole-brain network functionality and structure. Regarding the model selection for the classifier, we found that Support Vector Machine (SVM) best fit these significant network features. The combined model based on dFC and SC features significantly improved classification performance between cLBP patients and HCs (AUC=0.9772). Finally, the results from an external validation set support our hypotheses and provide insights into the potential applicability of the model in real-world scenarios. Our discovery of enhanced connectivity between the thalamus and both the dlPFC (FPN) and SI (SMN) provides a valuable supplement to prior research on cLBP.

Butterfly Vertebra: A Retrospective Study of 30 Patients.

BACKGROUND: Butterfly vertebra (BV) is a rare congenital spinal anomaly for which there is a paucity of large-scale retrospective studies and established guidelines for treatment. The objective of this study was to elucidate the clinical characteristics, imaging findings, and therapeutic approaches for BV. METHODS: We conducted a retrospective analysis of 30 patients diagnosed with BV at our hospital from 2009 to 2023, examining clinical data, imaging findings, and clinical interventions. RESULTS: The analysis comprised a cohort of 30 patients, consisting of 15 males and 15 females, with a mean age of 27.63 ± 19.84 years. Imaging studies indicated that the majority of vertebral bodies affected by BV were single-segmented (63.3%, 19/30) and less commonly multi-segmented (36.7%, 11/30). These findings frequently coexisted with other medical conditions, most notably spinal scoliosis (76.7%, 23/30). Furthermore, the study identified a range of spinal abnormalities among patients, including hemivertebral deformity (30.0%, 9/30), spinal cleft (10.0%, 3/30), lumbar disc protrusion or herniation (10.0%, 3/30), vertebral slippage (10.0%, 3/30), thoracic kyphosis deformity (6.67%, 2/30), vertebral fusion deformity (6.67%, 2/30), compressive fractures (3.3%, 1/30), and vertebral developmental anomalies (3.3%, 1/30). Clinical intervention resulted in symptom relief for 23 nonsurgical patients through lifestyle modifications, analgesic use, and physical therapy. Seven surgical patients underwent appropriate surgical procedures, leading to satisfaction and adherence to regular postoperative follow-up appointments. CONCLUSIONS: BV is a rare vertebral anomaly that can be easily misdiagnosed due to its similarity to other diseases. Consequently, it is imperative to enhance vigilance in the differential diagnosis process in order to promptly recognize BV. Furthermore, in cases where patients present with additional associated radiographic findings, a thorough evaluation is typically warranted and timely measures should be taken for treatment.

Dysregulated neural activity between the thalamus and cerebral cortex mediates cortical reorganization in cervical spondylotic myelopathy.

Neuroimaging research has revealed significant changes in brain structure and function in patients with cervical spondylotic myelopathy(CSM). The thalamus plays a crucial role in this process, although its mechanisms of action remain incompletely understood. This study aimed to investigate whether spinal cord compression leads to alterations in the functional connectivity between the thalamus and the cerebral cortex, and to determine if such changes are associated with structural and functional remodeling of the brain in patients with CSM, and to identify potential neuroimaging biomarkers for classification. The study included 40 patients with CSM and 34 healthy controls(HCs) who underwent resting-state functional magnetic resonance imaging(fMRI) and structural MRI scans. Brain structural and functional metrics were quantified using functional connectivity(FC), fractional amplitude of low-frequency fluctuations(fALFF), surface-based morphometry(SBM), and independent component analysis(ICA) based on functional and structural MRI. Patients with CSM exhibited significantly reduced fALFF in the bilateral lateral lingual gyrus, bilateral calcarine fissure, left precentral gyrus and postcentral gyrus, left middle and superior occipital gyrus, left superior marginal gyrus, left inferior parietal gyrus, and right Rolandic operculum. ICA results revealed weakened functional connectivity between the sensorimotor network (SMN) and the left and right frontoparietal network(FPN), and lateral visual network (lVN), along with decreased connectivity between lVN and rFPN, and increased connectivity between lFPN and rFPN. Patients with CSM also had decreased sulcus depth in the bilateral insula, left precentral and postcentral gyrus, and right lingual gyrus and calcarine fissure. Furthermore, cervical spondylotic myelopathy patients showed decreased functional connectivity between the left ventral posterolateral nucleus (VPL) of the thalamus and the right middle occipital gyrus (MOG). Finally,multimodal neuroimaging with support vector machine(SVM) classified patients with CSM and healthy controls with 86.00% accuracy. Our study revealed that the decrease in functional connectivity between the thalamus and cortex mediated by spinal cord compression leads to structural and functional reorganization of the cortex. Features based on neuroimaging markers have the potential to become neuroimaging biomarkers for CSM.

Remodeling of the brain correlates with gait instability in cervical spondylotic myelopathy.

Introduction: Cervical spondylotic myelopathy (CSM) is a common form of non-traumatic spinal cord injury (SCI) and usually leads to remodeling of the brain and spinal cord. In CSM with gait instability, the remodeling of the brain and cervical spinal cord is unclear. We attempted to explore the remodeling of these patients' brains and spinal cords, as well as the relationship between the remodeling of the brain and spinal cord and gait instability. Methods: According to the CSM patients' gait, we divided patients into two groups: normal gait patients (nPT) and abnormal gait patients (aPT). Voxel-wise z-score transformation amplitude of low-frequency fluctuations (zALFF) and resting-state functional connectivity (rs-FC) were performed for estimating brain changes. Cross-sectional area (CSA) and fractional anisotropy (FA) of the spinal cord were computed by Spinal cord toolbox. Correlations of these measures and the modified Japanese Orthopedic Association (mJOA) score were analyzed. Results: We found that the zALFF of caudate nucleus in aPT was higher than that in healthy controls (HC) and lower than that in nPT. The zALFF of the right postcentral gyrus and paracentral lobule in HC was higher than those of aPT and nPT. Compared with the nPT, the aPT showed increased functional connectivity between the caudate nucleus and left angular gyrus, bilateral precuneus and bilateral posterior cingulate cortex (PCC), which constitute a vital section of the default mode network (DMN). No significantly different FA values or CSA of spinal tracts at the C2 level were observed between the HC, nPT and aPT groups. In CSM, the right paracentral lobule's zALFF was negatively correlated with the FA value of fasciculus gracilis (FCG), and the right caudate zALFF was positively correlated with the FA value of the fasciculus cuneatus (FCC). The results showed that the functional connectivity between the right caudate nucleus and DMN was negatively correlated with the CSA of the lateral corticospinal tract (CST). Discussion: The activation of the caudate nucleus and the strengthening functional connectivity between the caudate nucleus and DMN were associated with gait instability in CSM patients. Correlations between spinal cord and brain function might be related to the clinical symptoms in CSM.

Degeneration of the Sensorimotor Tract in Degenerative Cervical Myelopathy and Compensatory Structural Changes in the Brain.

Degenerative cervical myelopathy is a progressive neurodegenerative disease, that has become increasingly prevalent in the aging population worldwide. The current study determined the factors affecting degeneration in the sensorimotor tract with degenerative cervical myelopathy and its relationship with brain structure. We divided patients into hyperintensity (HS) and non-hyperintensity (nHS) groups and measured the fractional anisotropy and apparent diffusion coefficients of the lateral corticospinal tract (CST), fasciculus gracilis and fasciculus cuneatus (FGC). Voxel-based morphometry (VBM) and tract-based spatial statistics (TBSS) techniques were used to estimate brain structure changes. Correlation of the modified Japanese Orthopaedic Association (mJOA) score, light touch, pinprick, motor score, and fractional anisotropy (FA) ratios of the CST at different levels were analyzed. Compared to healthy controls, the FA ratios of CST in the HS and nHS groups were decreased at all levels, and the apparent diffusion coefficient (ADC) ratio was increased only at C4/5 levels in the HS group. The FA ratio of FGC was decreased at the C3/4 and C4/5 levels in the HS group and only decreased at the C4/5 level in the nHS group. The ADC ratio was decreased only at the C4/5 level in the HS group. VBM analysis revealed that the volume of the precentral gyrus, postcentral gyrus, and paracentral lobule increased in patients compared to controls. TBSS analysis found no statistical significance between the sensory and motor tracts in white matter. The volume of clusters in HS and nHS groups negatively correlated with the C1/2 FA ratio of the CST. The results showed that the degeneration distance of the CST was longer than the FGC, and the degeneration distance was related to the degree of compression and spinal cord damage. Structural compensation and the neurotrophin family may lead to enlargement of the brain.

Differences in bone mineral density of trajectory between lumbar cortical and traditional pedicle screws.

BACKGROUND: Cortical bone trajectory (CBT) has been well-known in spine surgery for obtaining improved fixation while minimizing soft tissue dissection. This study was designed to compare the bone mineral density (BMD) between the CBT and traditional trajectory (TT) by using Hounsfield unit (HU) values and identify the ideal decades of patients and the suitable lumbar segments using this CBT technology from a radiological standpoint. METHODS: Patients were selected randomly from an institutional database based on age (evenly distributed by a decade of life) and gender. A total of 240 healthy patients had a computed tomography (CT) scan of the chest, abdomen, and pelvis. For each patient, axial slices of every vertebra were cut in two planes: one horizontal to the pedicle representing the plane wherein pedicle screws were inserted using the TT and the other in a caudocranial plane representing the plane wherein pedicle screws were inserted using the CBT. For each trajectory, a region of interest (ROI) was selected within the area wherein the screws were inserted. A CT number (HU values) was then calculated within each ROI to represent bone density. RESULTS: HU values measured at the ROI of CBT were significantly greater than those of the traditional pedicle screw in all age groups, and the specific value (ratio of the HU values of CBT/the HU values of TT) between CBT and TT was 1.92. A significant difference was observed between male and female. The HU values of CBT and TT of males were generally higher than those of females (males: CBT/TT 1.89 ± 0.45; Females: CBT/TT 1.95 ± 0.47). The specific value in HU values significantly increased with increasing age (p = 0.000) and cauda lumbar level (p = 0.000) in males and females. CONCLUSION: BMD, as measured by HU values for the ROI of the CBT screw, was significantly greater than that of the traditional pedicle screw, especially in old patients and cauda lumbar segments.

Biomechanical properties of pedicle screw fixation augmented with allograft bone particles in osteoporotic vertebrae: different sizes and amounts.

BACKGROUND CONTEXT: A persistent challenge in spine surgery is improving screw fixation in patients with poor bone quality. Augmenting pedicle screw fixation with allograft bone appears to be a promising approach. PURPOSE: To evaluate the biomechanical properties of screws augmented or revised with allograft bone particles (ABPs) and the effect of different sizes and amounts of ABP on screw-fixation strength. STUDY DESIGN: Biomechanical in vitro study. METHODS: Sixty vertebrae were separated randomly into six groups. Groups A1 and A2: one pedicle of each vertebra was selected randomly to be the original pedicle and implanted with a screw. Then, biomechanical tests were performed. Subsequently, the failed trajectory was revised with 1 mm ABP, and the contralateral pedicle was augmented with the same size and amount of ABP. Groups B1 and B2: two pedicles of each vertebra were augmented with different amounts of 1 mm ABP. Groups C1 and C2: one pedicle of each vertebra was augmented with 1 mm ABP to the maximum. The contralateral pedicle of each vertebra was augmented with the same amount of 2 mm ABP. After augmentation and screw insertion, groups A1, B1, and C1 were subjected to the pullout test, whereas groups A2, B2, and C2 the cyclic fatigue test. RESULTS: Groups A1 and A2: screw augmentation increased the pullout strength by 47%, cycles to failure by 31%, and failure loads by 21% compared with the screw in the original pedicle (p<.05). Screw revision obtained 79% pullout strength, 97% cycles to failure, and 98% failure loads of the screw in the original pedicle (p<.05). Groups B1 and B2: full (100%) trajectory augmentation increased the pullout strength by 39%, cycles to failure by 18%, and failure loads by 12% compared with half (50%) trajectory augmentation (p<.05). Groups C1 and C2: the values of the pullout strength, cycles to failure, and failure loads of the screw augmented with 1 mm ABP were all greater than those in the 2 mm ABP. However, no significant differences were observed between the two treatments (p>.05). CONCLUSIONS: Trajectory augmentation with ABP can significantly increase the strength of the augmented screws. Full trajectory augmentation can provide greater strength compared with half trajectory augmentation. In patients with osteoporosis, we recommend using 1 mm ABP in full trajectory augmentation (0.3 g ABP for 5.5 mm×40 mm and 0.5 g ABP for 6.5 mm×45 mm) before trajectory fails.

Cortical bone trajectory screws used to save failed traditional trajectory screws in the osteoporotic lumbar spine and vice versa: a human cadaveric biomechanical study.

OBJECTIVETraditional trajectory (TT) screws are widely used in lumbar fixation. However, they may require revision surgery in some instances, especially in patients with osteoporotic spines. Cortical bone trajectory (CBT) screws may potentially be used to rescue a failed TT screw and vice versa in nonosteoporotic spines. This study aimed to investigate whether a CBT screw can salvage a compromised TT screw in osteoporotic lumbar spines and vice versa.METHODSA total of 42 vertebrae from 17 cadaveric lumbar spines were obtained. Bone mineral density was measured, and a CBT screw was randomly inserted into one side of each vertebra. A TT screw was then inserted into the contralateral side. The biomechanical properties of the screws were tested to determine their insertional torque, pullout strength, and fatigue performance. After checking the screws for the failure of each specimen, the failed screw track was salvaged with a screw of the opposite trajectory. The specimen was then subjected to the same mechanical tests, and results were recorded. A repeat pullout test on TT and CBT screws was also performed.RESULTSWhen CBT screws were used to rescue failed TT screws, the original torque increased by 50%, an average of 81% of the pullout strength of the initial TT screws was retained, and the fatigue performance was equal to that of the original screws, which were considerably stronger than the loose TT screws-that is, the TT repeat screws/TT screws were 33% of the pullout strength of the initial TT screws. When the TT screws were used to salvage the compromised CBT screws, the TT screws retained 51% of the original torque and 54% of the original pullout strength, and these screws were still stronger than the loose CBT screws-that is, the loose CBT screws retained 12% pullout strength of the initial CBT screws. Fatigue performance and the ratio of the pullout strength considerably decreased between the CBT rescue screws and the original CBT screws but slightly changed between the TT rescue screws and the original TT screws.CONCLUSIONSCBT and TT screws can be applied in a revision technique to salvage each other in osteoporotic lumbar spines. Additionally, CBT and TT screws each retain adequate insertional torque, pullout strength, and fatigue performance when used for revision in osteoporotic lumbar spines.

Bone mesenchymal stem cell-conditioned medium attenuates the effect of oxidative stress injury on NSCs by inhibiting the Notch1 signaling pathway.

Numerous studies have demonstrated the therapeutic effect of bone mesenchymal stem cells on spinal cord injury (SCI), especially on neural stem cells (NSCs). However, the predominant mechanisms of bone mesenchymal stem cells (BMSCs) are unclear. Recently, some researchers have found that paracrine signaling plays a key role in the therapeutic capacity of BMSCs and emphasized that the protective effect of BMSCs may be due to paracrine factors. In this study, we aimed to investigate the potential mechanisms of BMSCs to protect NSCs. NSCs were identified by immunocytochemistry. The oxidative stress environment was simulated by H2 O2 (50, 100, 200 µM) for 2 h. The apoptotic rate of the NSCs was detected via flow cytometry. Lactate dehydrogenase (LDH), malondialdehyde (MDA), and superoxide dismutase (SOD) activity were evaluated via corresponding assay kits. Western blot was used to detect the expressions of Notch1, HES1, caspase-3, cleave caspase-3, Bax, and Bcl-2. We found that H2 O2 could significantly induce the apoptosis of NSCs, increase LDH, MDA levels, and decrease SOD activity by activating the Notch1 signaling pathway. DAPT (the specific blocker of Notch1) and BMSC-conditioned medium (BMSC-CM) could significantly prevent the apoptotic effect and oxidative stress injury on NSCs that were treated with H2 O2 . We also revealed that BMSC-CM could decrease the expression of Notch1, Hes1, cleave caspase-3, Bax, and increases the expression of Bcl-2 in NSCs, which was induced by H2 O2 . These results have revealed that BMSC-CM can neutralize the effect against oxidative stress injury on the apoptosis of NSCs by inhibiting the Notch1 signaling pathway.

New vertebral fractures after osteoporotic vertebral compression fracture between balloon kyphoplasty and nonsurgical treatment PRISMA.

BACKGROUND: Because of aging of population, osteoporotic vertebral compression fracture (OVCF) appears an increasing incidence rate. Conservative therapy (CT) and balloon kyphoplasty (BKP) have been used to treat OVCFs. However, an increase in new vertebral compression fractures at nontreated levels following BKP is of concern. It is still not clear whether new fractures were a result of BKP and the purpose of this meta-analysis was to evaluate the new fractures risk after BKP compared with CT. METHODS: An exhaustive literature search of PubMed, EMBASE, and the Cochrane Library was conducted to identify randomized controlled trials and prospective nonrandomized controlled study that compared BKP with CT for patients suffering OVCF. A random-effect model was used. Results were reported as standardized mean difference or risk ratio with 95% confidence interval. RESULTS: Twelve studies were included and there was no significant difference in total new fractures (P = .33) and adjacent fractures (P = .83) between 2 treatments. Subgroup analyses did not demonstrate significant differences in follow-up period, mean age, anti-osteoporosis therapy, and the proportion of women. CONCLUSION: Our systematic review revealed that an increased risk of fracture of vertebral bodies was not associated with BKP compared with CT.

Biomechanical Fixation Properties of the Cortical Bone Trajectory in the Osteoporotic Lumbar Spine.

OBJECTIVE: Selecting optimal strategies for improving fixation in osteoporotic lumbar spine is an important issue in clinical research. Cortical bone trajectory (CBT) screws have been proven to enhance screw pullout strength, but biomechanical efficacy of these screws remains understudied. The aim of this study was to evaluate biomechanical efficacy of CBT screws in osteoporotic lumbar spine. METHODS: Thirty-one vertebrae from 14 cadaveric lumbar spines were obtained. All specimens were measured by computed tomography; the diameter of pedicles, excluding those of vertebral bodies with very small pedicle developments, was calculated. After measuring bone mineral density, the CBT screw was randomly inserted into 1 side, and the traditional trajectory (TT) screw was inserted into the contralateral side. Maximum insertional torque was recorded after screw insertion. Of vertebrae, 21 were subjected to pullout testing at a rate of 5 mm/minute, and 10 were subjected to cyclic fatigue testing. Each construct was loaded until exceeding 5 mm. RESULTS: Average bone mineral density was 0.567 ± 0.101 g/cm2. CBT screws had higher maximum insertional torque (degrees of freedom = 30, t = 5.78, P < 0.001, 0.333 N-m vs. 0.188 N-m) and higher axial pullout strength (degrees of freedom = 20, t = 7.41, P < 0.001, 394 N vs. 241 N) than TT screws. Increased bone mineral density was not significantly associated with higher pullout load. Compared with TT screws, CBT screws showed better resistance to fatigue testing and required more cycles to exceed 5 mm (degrees of freedom = 9, t = 5.62, P < 0.001, 6161 cycles vs. 3639 cycles). Failure load for displacing screws was also significantly greater for CBT screws than for TT screws (degrees of freedom = 9, t = 5.75, P < 0.001, 443 N vs. 317 N). CONCLUSIONS: CBT screws had better biomechanical fixation in osteoporotic lumbar spine compared with standard pedicle screws.

BMSCs promote the differentiation of NSCs into oligodendrocytes via mediating Id2 and Olig expression through BMP/Smad signaling pathway.

Neural stem cells (NSCs) have emerged as a promising treatment for spinal cord injuries. However, the increasing expression of bone morphogenetic proteins (BMPs) in spinal cord injury lesion sites seems to have contributed to the limited oligodendroglial differentiation and the majority of the astroglial differentiation of NSCs. In the present study, we demonstrate that BMPs promote NSCs differentiation toward astrocytes and prevent them from differentiating into oligodendrocytes. This effect is accompanied by the increasing expression of Id2 and the reduction in Oilg1/2 expression. Treatment with bone marrow stromal cells (BMSCs) can enhance the development of oligodendrocytes in the presence of BMPs. The analysis of Id2, as well as Olig1 and Olig2 gene expression, reveals that the effect of BMPs on these gene expressions is reversed with the addition of BMSCs. In sum, these data strongly suggest that BMSCs can promote the differentiation of NSCs into oligodendrocytes through mediating Id2 and Olig1/2 expression by blocking the BMP/Smad signaling pathway.

Novel Placement of Cortical Bone Trajectory Screws in the Lumbar Spine: A Radiographic and Cadaveric Study.

STUDY DESIGN: This is a radiographic and cadaveric study. OBJECTIVE: The aim of this study was to conduct a detailed comparison about the parameters between the ideal cortical bone trajectory (CBT) and practical CBT screw. SUMMARY OF BACKGROUND DATA: CBT screws have recently become popular in spinal surgery, mainly because of their improved fixation while minimizing soft tissue dissection. However, to our knowledge, no previous study has provided a detailed comparison on the parameters between the ideal CBT and practical CBT screws. MATERIALS AND METHODS: The 3-dimensional computed tomography scans of 126 spinal vertebrae separated from 40 lumbar spines were studied. After determining the CBT, the maximal screw length, maximal screw diameter, lateral angle (LA), and cephalad angle (CA) were calculated. Thereafter, CBT screws were inserted into these cadaveric lumbar spines. Subsequently, the lateral angle of screw (LAs) and cephalad angle of screw (CAs) of the screws were measured using 3-dimensional computed tomography. RESULTS: As for the ideal CBT, the maximal screw length gradually increased from L1 (32.0 mm) to L4 (35.3 mm) and then decreased at L5 (34.8 mm). Moreover, the maximal screw diameter increased from L1 (4.5 mm) to L5 (7.5 mm). The LA from L1 to L5 were 9.2, 9.4, 9.9, 11.2, and 12.0 degrees, respectively. The CA from L1 to L5 were 25.8, 25.8, 26.3, 26.8, and 26.0 degrees, respectively. As for the actual CBT screw, the LAs from L1 to L5 were 12.7, 14.1, 13.2, 12.4, and 13.0 degrees, respectively. The CAs from L1 to L5 were 25.4, 27.5, 29.2, 30.1, and 30.5 degrees, respectively. Significant differences were observed between the angles of the ideal trajectory and the actual screw. CONCLUSIONS: Parameters of the actual CBT screw are slightly larger than the optimal trajectory measurements. The CAs and LAs are ∼25-30 and 10-16 degrees, respectively. L1 and L2 should be given considerable attention when using the CBT technique. And the trajectory measurements can only be used as a guide in clinical practice.

A preliminary study of 3.0-T magnetic resonance diffusion tensor imaging in cervical spondylotic myelopathy.

PURPOSE: To compare diffusion tensor imaging (DTI) parameters of the spinal cord between patients with cervical spondylotic myelopathy (CSM) and normal subjects, and investigate their significance in the clinical diagnosis, surgical planning and post-operative evaluation of CSM. METHODS: Routine sequence magnetic resonance imaging (MRI) and DTI scans were performed in 50 normal subjects and 60 cases of CSM with 3.0-T MR. DTI images, apparent diffusion coefficient (ADC) and fractional anisotropy (FA) colormaps corresponding to spinal cord cross-sections were obtained. The spinal cord function of CSM patients was measured using modified Japanese Orthopaedic Association (mJOA) scoring and Nurick grade at different times. The changes in DTI parameters and their correlation with spinal cord function scores were analysed by SPSS 19. RESULTS: There were significant differences in DTI parameters of the spinal cord between normal subjects and patients with CSM (ADC: 1.119 ± 0.087 vs. 1.395 ± 0.091, P < 0.01; FA: 0.661 ± 0.057 vs. 0.420 ± 0.080, P < 0.01). The FA values at the maximal compression level of the spinal cord in the patients with CSM were significantly associated with the mJOA score pre-operatively, 1 week, and 1, 3 and 6 months post-operatively, with Pearson's correlation coefficients of 0.58 (P < 0.01), 0.53 (P < 0.05), and 0.51 (P < 0.05), 0.54 (P < 0.05) and 0.55 (P < 0.05), respectively. However, the FA values were significantly negatively associated with the Nurick grade, with Pearson's correlation coefficients of - 0.40 (P < 0.05), - 0.39 (P < 0.05), and -0.41 (P < 0.05), - 0.45 (P < 0.05) and - 0.44 (P < 0.05), respectively. CONCLUSIONS: DTI may play a significant role in diagnosing and predicting the development of CSM. These slides can be retrieved under Electronic Supplementary Material.

Biological Behavior of Human Nucleus Pulposus Mesenchymal Stem Cells in Response to Changes in the Acidic Environment During Intervertebral Disc Degeneration.

An acidic environment is vital for the maintenance of cellular activities but can be affected tremendously during intervertebral disc degeneration (IVDD). The effect of changes in the acidity of the environment on human nucleus pulposus mesenchymal stem cells (NP-MSCs) is, however, unknown. Thus, this study aimed to observe the biological effects of acidic conditions mimicking a degenerated intervertebral disc on NP-MSCs in vitro. NP-MSCs were isolated from patients with lumbar disc herniation and were further identified by their immunophenotypes and multilineage differentiation. Then, cells were cultured at acidic pH levels (pH 6.2, pH 6.5, pH 6.8, pH 7.1, and pH 7.4) with/without amiloride, an acid-sensing ion channel (ASIC) blocker. The proliferation and apoptosis of NP-MSCs and the expression of stem cell-related genes (Oct4, Nanog, Jagged, Notch1), ASICs, and functional genes (Aggrecan, SOX-9, Collagen-I, and Collagen-II) in NP-MSCs were evaluated. Our work showed that cells obtained from human degenerated NP met the criteria of International Society for Cellular Therapy. Therefore, cells obtained from a degenerated nucleus pulposus were definitively identified as NP-MSCs. Our results also indicated that acidic conditions could significantly inhibit cell proliferation and increase cell apoptosis. Gene expression results demonstrated that acidic conditions could decrease the expression of stem cell-related genes and inhibit extracellular matrix synthesis, whereas it could increase the expression of ASICs. Our study further verified that the above-mentioned biological activities of NP-MSCs could be significantly improved by amiloride. Therefore, the results of the study indicated that the biological behavior of NP-MSCs could be inhibited by acidic conditions during IVDD, and amiloride may meliorate IVDD by improving the activities of NP-MSCs.

Sagittal Pelvic Radius in Low-Grade Isthmic Lumbar Spondylolisthesis of Chinese Population.

OBJECTIVE: To investigate the variation of pelvic radius and related parameters in low-grade isthmic lumbar spondylolisthesis. METHODS: Seventy-four patients with isthmic lumbar spondylolisthesis and 47 controls were included in this study. There were 17 males and 57 females between 30 and 66 years of age, including 30 with grade I slippages and 44 grade II slippages; diseased levels included 34 cases on L4 and 40 cases on L5. Thoracic kyphosis (TK), the pelvic radius (PR), the pelvic angle (PA), pelvic morphology (PR-S1), and total lumbopelvic lordosis (PR-T12) were assessed from radiographs. RESULTS: Statistically significant differences were found for the PA, PR-T12, and PR-S1 (24.5±6.6°, 83.7±9.8°, and 25.4±11.2°, respectively) of the patients with spondylolisthesis and the healthy volunteers (13.7±7.8°, 92.9±9.2°, and 40.7±8.9°, respectively). The TK/PR-T12 ratios were between 0.15 and 0.75. However, there were no differences in all the parameters between the L4 and L5 spondylolysis subgroups (p>0.05). The TK and PR-S1 of grade II were less than grade I, but the PA was greater. The PR-T12 of female patients were less than male patients, but the PA was greater (p<0.05). CONCLUSION: Pelvic morphology differed in patients with low-grade isthmic lumbar spondylolisthesis compared to controls. Gender and the grade of slippage impacted the sagittal configuration of the pelvis, but the segment of the vertebral slip did not. Overall, the spine of those with spondylolisthesis remains able to maintain sagittal balance despite abnormal pelvic morphology.

The Biomechanical Properties of Pedicle Screw Fixation Combined With Trajectory Bone Cement Augmentation in Osteoporotic Vertebrae.

STUDY DESIGN: The biomechanics of pedicle screw fixation combined with trajectory cement augmentation with various filling volumes were measured by pull-out, periodic antibending, and compression fatigue tests. OBJECTIVE: To investigate the biomechanical properties of the pedicle screw fixation combined with trajectory bone cement (polymethylmethacrylate) augmentation in osteoporotic vertebrae and to explore the optimum filling volume of the bone cement. SUMMARY OF BACKGROUND DATA: Pedicle screw fixation is considered to be the most effective posterior fixation method. The decrease of the bone mineral density apparently increases the fixation failure risk caused by screw loosening and displacement. Trajectory bone cement augmentation has been confirmed to be an effective method to increase the bone intensity and could markedly increase the stability of the fixation interface. METHODS: Sixteen elderly cadaveric 1-5 lumbar vertebral specimens were diagnosed with osteoporosis. The left and right vertebral pedicles were alternatively randomized for treatment in all groups, with the contralateral pedicles as control. The study groups included: group A (pedicle screw fixation with full trajectory bone cement augmentation), group B (75% filling), group C (50% filling), and group D (25% filling). Finally, the bone cement leakage and dispersion were assessed and the mechanical testing was conducted. RESULTS: The bone cement was well dispersed around the pedicle screw. The augmented bone intensity, pull-out strength, periodic loading times, and compression fatigue performance were markedly higher than those of the control groups. With the increase in trajectory bone cement, the leakage was also increased (P<0.05). The pull-out strength of the pedicle screw was increased with an increase in bone mineral density and trajectory bone cement. It peaked at 75% filling, with the largest power consumption. CONCLUSIONS: The optimal filling volume of the bone cement was 75% of the trajectory volume (about 1.03 mL). The use of excessive bone cement did not increase the fixation intensity but increased the risk of leakage.

Ellipticity of near-threshold harmonics from stretched molecules.

We study the ellipticity of near-threshold harmonics (NTH) from aligned molecules with large internuclear distances numerically and analytically. The calculated harmonic spectra show a broad plateau for NTH which is several orders of magnitude higher than that for high-order harmonics. In particular, the NTH plateau shows high ellipticity at small and intermediate orientation angles. Our analyses reveal that the main contributions to the NTH plateau come from the transition of the electron from continuum states to these two lowest bound states of the system, which are strongly coupled together by the laser field. Besides continuum states, higher excited states also play a role in the NTH plateau, resulting in a large phase difference between parallel and perpendicular harmonics and accordingly high ellipticity of the NTH plateau. The NTH plateau with high intensity and large ellipticity provides a promising manner for generating strong elliptically-polarized extreme-ultraviolet (EUV) pulses.

Polarization properties of below-threshold harmonics from aligned molecules H2+ in linearly polarized laser fields.

We investigate the polarization properties of below-threshold harmonics from aligned molecules in linearly polarized laser fields numerically and analytically. We focus on lower-order harmonics (LOHs). Our simulations show that the ellipticity of below-threshold LOHs depends strongly on the orientation angle and differs significantly for different harmonic orders. Our analysis reveals that this LOH ellipticity is closely associated with resonance effects and the axis symmetry of the molecule. These results shed light on the complex generation mechanism of below-threshold harmonics from aligned molecules.

Associations between vitamin D receptor gene polymorphisms and osteoarthritis: an updated meta-analysis.

OBJECTIVE: Vitamin D receptor (VDR) gene polymorphisms may be associated with the risk of OA, however, evidence for this is controversial. This meta-analysis aims to confirm whether VDR gene polymorphisms are associated with OA. METHODS: Meta-analyses on the association between OA and VDR ApaI, BsmI, TaqI and FokI polymorphisms were conducted using allele and homozygote contrast and contrasts in the recessive and dominant models. Stratification analyses by different demographic regions (Europe vs Asian) were also performed and pooled odds ratios (ORs) were obtained using the random effects model if the results were heterogeneous. RESULTS: A total of 13 relevant studies involving OA patients (n = 2104) and controls (n = 2939) were included in the analysis. There were significant associations between VDR ApaI polymorphisms and OA in the Asian population (A vs a: OR= 1.16, 95% CI 1.02, 1.32, P = 0.025; AA vs Aa/aa: OR= 1.36, 95% CI 1.04, 1.77, P = 0.025; AA vs aa: OR= 1.35, 95% CI 1.00, 1.80, P = 0.047), but not in the whole population. There was also a statistically significant association between FokI polymorphism and OA (FF vs Ff/ff: OR= 0.65, 95% CI 0.44, 0.95, P = 0.024); however, this result was derived from only two studies. No significant associations were found between VDR TaqI and BsmI polymorphisms and OA. CONCLUSION: There are modest but statistically significant associations between VDR ApaI polymorphisms and the susceptibility of OA in the Asian population.