Beyond the Bony Fragment: A Review of Limbus Vertebra.

Vertebral limbus is a condition characterized by the intraspongious herniation of a portion of the nucleus pulposus. It is often asymptomatic, but it can sometimes cause nonspecific symptoms such as local pain and muscle spasm, or, in rare cases, radiculopathies, which is why it can be confused with vertebral fractures, spondyloarthropathies, infectious or tumoral processes. Early recognition of this pathology is preferable for a correct diagnosis and adequate treatment, the latter ranging from conservative approaches (such as personalized exercise programs and physical therapy) to surgical interventions reserved for severe cases with nerve compression.

Elbow Reconstruction with Megaprosthesis: An Effective Strategy for Salvage Surgery in Trauma Patients.

Delayed fracture healing can have devastating functional consequences, including pseudoarthrosis. Many factors can contribute to delayed healing, including decreased vascularity, micro-motion at the fracture site, large fracture gaps, multiple traumas at the same site, compromised metabolic status, surgical complications, and other conditions. A 61-year-old female patient was referred to our hospital with left distal humeral pseudarthrosis, accompanied by chronic pain and disability. Two years prior, the patient suffered a traumatic incident. At another medical facility, the patient underwent open reduction and internal fixation surgery with simultaneous ulnar nerve transposition. She showed favorable postoperative recovery. Unfortunately, approximately one year later, the patient sustained a second trauma to the same arm. This led to peri-implant fracture and post-traumatic aseptic degradation of the osteosynthesis system which was subsequently removed. Twelve months after the last surgery, the patient was referred to our hospital and, after thorough consideration of the therapeutic options, we decided to perform left elbow arthroplasty with left distal humeral reconstruction by using Zimmer's Comprehensive Segmental Revision System. This approach is generally reserved for tumors, and only a handful of cases of megaprostheses for non-tumoral indications have been previously reported. The surgery and perioperative care of our patient were optimal, there were no complications, and the patient recovered arm functionality following rehabilitation.

Megaprosthesis for a Rare Case of Bone Metastasis of Thyroid Carcinoma: Case Management and Surgical Approach.

We present the case of a 56-year-old male patient diagnosed with Hürthle cell carcinoma (HCC) that developed widespread metastasis in bone, lung, and lymph nodes with a larger tumor located in the right tibia. The patient was only disturbed by the pain, discomfort, and disability linked to the tibial metastasis. After careful consideration, the best course of action was considered to be the surgical excision of the proximal right tibia with arthroplasty using the C LINK Megaprosthesis tumor revision system. Histological and immunohistochemical analyses were conducted on the tibial resection specimen. In addition, a comprehensive review of prior histological specimens from the primary thyroid tumor, lymph nodes, and lung was undertaken to evaluate the prognosis and provide guidance for the postoperative management of the patient.

Use of Biomaterials in 3D Printing as a Solution to Microbial Infections in Arthroplasty and Osseous Reconstruction.

The incidence of microbial infections in orthopedic prosthetic surgeries is a perennial problem that increases morbidity and mortality, representing one of the major complications of such medical interventions. The emergence of novel technologies, especially 3D printing, represents a promising avenue of development for reducing the risk of such eventualities. There are already a host of biomaterials, suitable for 3D printing, that are being tested for antimicrobial properties when they are coated with bioactive compounds, such as antibiotics, or combined with hydrogels with antimicrobial and antioxidant properties, such as chitosan and metal nanoparticles, among others. The materials discussed in the context of this paper comprise beta-tricalcium phosphate (ß-TCP), biphasic calcium phosphate (BCP), hydroxyapatite, lithium disilicate glass, polyetheretherketone (PEEK), poly(propylene fumarate) (PPF), poly(trimethylene carbonate) (PTMC), and zirconia. While the recent research results are promising, further development is required to address the increasing antibiotic resistance exhibited by several common pathogens, the potential for fungal infections, and the potential toxicity of some metal nanoparticles. Other solutions, like the incorporation of phytochemicals, should also be explored. Incorporating artificial intelligence (AI) in the development of certain orthopedic implants and the potential use of AI against bacterial infections might represent viable solutions to these problems. Finally, there are some legal considerations associated with the use of biomaterials and the widespread use of 3D printing, which must be taken into account.

Etiology of Total Knee Arthroplasty Revisions: A Two-Decade Institutional Perspective.

Total knee arthroplasty (TKA) implant survival time is determined by various patient and implant-related factors and varies significantly in recent worldwide reports. In our study, we have included 247 TKA revisions in 203 patients performed in our hospital over the last 20 years. Multiple etiologies of revisions were identified and classified into 10 categories. Time to failure was analyzed with regard to etiology, patient demographics, and other relevant data. The overall average time to revision was 44.08 months (95% confidence interval (CI) between 33.34 and 49.82 months). Age at primary implant was negatively correlated with time to revision (hazard ratio (HR) = 1.0521 and 95% CI of HR = 1.0359 to 1.0685) and female patients showed a 1.59 times higher risk of implant failure than males. Periprosthetic joint infection was the cause of 46.56% (n=115) of revisions (out of which 12.55% (n=31) were early infections, diagnosed within the first three months), while aseptic loosening was found in 31.98% (n=79) of cases. Infection correlated with a shorter time to revision compared to aseptic loosening (p<0.05). These findings emphasize the need to intensify efforts to deliver the best patient care, select the best antibiotic regimen, and improve surgical techniques to decrease the incidence of infectious complications.

Initial Learning Curve for Robot-Assisted Total Knee Arthroplasty in a Dedicated Orthopedics Center.

Background and objectives: Our study aimed to assess the learning curve for robot-assisted (RA) total knee arthroplasty (TKA) in our hospital, compare operative times between RA-TKAs and manual TKAs, and assess the early complications rate between the two approaches. Methods: We included 39 patients who underwent RA-TKA and 45 control patients subjected to manual TKA in the same period and operated on by the same surgical staff. We collected demographic and patient-related data to assess potential differences between the two groups. Results: No statistical differences were recorded in regard to age, BMI, sex, Kellgren-Lawrence classification, or limb alignment between patients undergoing RA-TKA and manual TKA, respectively. Three surgeons transitioned from the learning to the proficiency phase in our study after a number of 6, 4, and 3 cases, respectively. The overall operative time for the learning phase was 111.54 ± 20.45 min, significantly longer compared to the average of 86.43 ± 19.09 min in the proficiency phase (p = 0.0154) and 80.56 ± 17.03 min for manual TKAs (p < 0.0001). No statistically significant difference was recorded between the global operative time for the proficiency phase TKAs versus the controls. No major complications were recorded in either RA-TKA or manual TKA groups. Conclusions: Our results suggest that experienced surgeons may adopt RA-TKA using this platform and quickly adapt without significant complications.

Overall Accuracy of Radiological Digital Planning for Total Hip Arthroplasty in a Specialized Orthopaedics Hospital.

Preoperative radiological planning is a key factor in the prediction of implant size and positioning that influences surgical time, the risk of complications, and functional outcomes. We have tested the accuracy of the digital templating performed in our hospital for a sample of 215 patients that underwent total hip arthroplasty. We assessed the accuracy of correctly predicting implant size for the femoral and acetabular components, as well as the stem neck length. We found that our method of templating proved accurate (within one size) in 95.8% of cases for the stem and 94.9% for the cup when using the anteroposterior view only, while the lateral view was accurate in 95.8% of cases for the stem and 97.2% for the cup. Exact prediction of the stem size was obtained in 77.7% of cases using the anteroposterior view and 67.0% of cases on the lateral view, and 73.0% and 74.4% of cases for the cup on the AP and LL views, respectively. Stem neck size was predicted exactly in 75.35% of cases and within one size in 93.49% of cases. We concluded that our method of digital templating using dedicated software is highly effective in accurately predicting implant size.

The Impact of Tourniquet Usage on TKA Outcome: A Single-Center Prospective Trial.

Background and Objectives: Total knee arthroplasties (TKAs) are the most effective surgical treatment for end-stage knee osteoarthritis. The tourniquet is used to reduce intraoperative blood loss, improving surgical field visualization. There is much controversy regarding the effectiveness and safety of using a tourniquet during total knee arthroplasties. The purpose of this prospective study is to determine the effect of tourniquet usage during TKAs on early functional outcomes and pain in our center. Materials and Methods: We conducted a randomized controlled trial of patients following a primary total knee replacement between October 2020 and August 2021. We recorded presurgical data, which included age, sex and knee range of motion. Intraoperatively, we measured the amount of blood aspiration and the surgical room time. After the surgery, we measured the amount of blood aspirated through the drains and the hemoglobin. We measured flexion, extension, Visual Analogue Scale (VAS) scores, and Western Ontario and McMaster Universities Arthritis Index (WOMAC score) scores for the functional evaluation. Results: We included 96 patients in the T group and 94 in the NT group, respectively, who remained until the last follow-up. Regarding blood loss, the NT group demonstrated significantly lower levels: 245 ± 97.8 mL intraoperative and 324.8 ± 151.65 mL postoperative, compared to the T group, where we recorded 276 ± 109.2 mL during the surgical procedures and 353.44 ± 101.55 mL after the surgery, (p < 0.05). We also recorded significantly shorter operative room time for the NT group, (p < 0.05). During the follow-up, we noticed postoperative improvements but without significant differences between the groups. Conclusions: We found a significant decrease in bleeding after no tourniquet usage during total knee replacements and shorter operative times. On the other hand, the knee function demonstrated no significant differences between the groups. Further studies may be required in order to assess complications.

Effect of Sodium selenite administration on the process of tendon healing in Wistar male rats.

Tendon lesions have a great effect on the quality of life and medical spending. Thus is important to investigate the mechanisms responsible for tendon healing and to identify novel treatment options. The aim of the present study was to evaluate the effect of Selenium on the healing processes of injured tendons. A total of 20 Wistar male rats were used and were split into two groups with two different treatment methods. The first group received a normal food administration, while the second group received Na2SeO3. The animals were kept for 28 days. During the eighth day, all animals underwent surgical experimental Achilles tendon lesion and a Kessler-type suture. After three weeks, the animals were sacrificed and the tendon was extracted for histological evaluation in order to do a comparison according to the Movin scale (modified by Bonar). The histological evaluation revealed an even orientation of the collagen fibers in the case of the experimental group (Se) compared with the second group. The Bonar score was 1.62 for the Se group, while the control group had a Bonar score of 1.98. The average number of tenocytes in the Se group was lower which is demonstrated by a lower Bonar score (1.22), compared with the second group (Bonar Score 1.85). In addition, a slightly higher number of tenocytes compared with the intact tendon areas was recorded. In vascularization, a decreased amount of blood vessels in the experimental group (Se) was observed (Bonar Score 1.70), compared with the control group (Bonar score 1.96). The present study demonstrated that Selenium administration on murine models could be beneficial for tendon healing. Further clinical research is required in order for this to be confidently recommended.

Validation of a New Prognostic Score in Patients with Ovarian Adenocarcinoma.

Background and Objectives: This study aimed to assess the impact of clinical prognostic factors and propose a prognostic score that aids the clinician's decision in estimating the risk for patients in clinical practice. Materials and Methods: The study included 195 patients diagnosed with ovarian adenocarcinoma. The therapeutic strategy involved multidisciplinary decisions: surgery followed by adjuvant chemotherapy (80%), neoadjuvant chemotherapy followed by surgery (16.4%), and only chemotherapy in selected cases (3.6%). Results: After a median follow-up of 68 months, in terms of progression-free survival (PFS) and overall survival (OS), Eastern Cooperative Oncology Group (ECOG) performance status of 1 and 2 vs. 0 (hazard ratio-HR = 2.71, 95% confidence interval-CI, 1.96-3.73, p < 0.001 for PFS and HR = 3.19, 95%CI, 2.20-4.64, p < 0.001 for OS), menopausal vs. premenopausal status (HR = 2.02, 95%CI, 1.35-3,0 p < 0.001 and HR = 2.25, 95%CI = 1.41-3.59, p < 0.001), ascites (HR = 1.95, 95%CI 1.35-2.80, p = 0.03, HR = 2.31, 95%CI = 1.52-3.5, p < 0.007), residual disease (HR = 5.12, 95%CI 3.43-7.65, p < 0.0001 and HR = 4.07, 95%CI = 2.59-6.39, p < 0.0001), and thrombocytosis (HR = 2.48 95%CI = 1.72-3.58, p < 0.0001, HR = 3.33, 95%CI = 2.16-5.13, p < 0.0001) were associated with a poor prognosis. An original prognostic score including these characteristics was validated using receiver operating characteristic (ROC) curves (area under the curve-AUC = 0.799 for PFS and AUC = 0.726 for OS, p < 0.001). The median PFS for patients with none, one, two, three, or four (or more) prognostic factors was not reached, 70, 36, 20, and 12 months, respectively. The corresponding median overall survival (OS) was not reached, 108, 77, 60, and 34 months, respectively. Conclusions: Several negative prognostic factors were identified: ECOG performance status ≥ 1, the presence of ascites and residual disease after surgery, thrombocytosis, and menopausal status. These led to the development of an original prognostic score that can be helpful in clinical practice.

Biomaterials Adapted to Vat Photopolymerization in 3D Printing: Characteristics and Medical Applications.

Along with the rapid and extensive advancements in the 3D printing field, a diverse range of uses for 3D printing have appeared in the spectrum of medical applications. Vat photopolymerization (VPP) stands out as one of the most extensively researched methods of 3D printing, with its main advantages being a high printing speed and the ability to produce high-resolution structures. A major challenge in using VPP 3D-printed materials in medicine is the general incompatibility of standard VPP resin mixtures with the requirements of biocompatibility and biofunctionality. Instead of developing completely new materials, an alternate approach to solving this problem involves adapting existing biomaterials. These materials are incompatible with VPP 3D printing in their pure form but can be adapted to the VPP chemistry and general process through the use of innovative mixtures and the addition of specific pre- and post-printing steps. This review's primary objective is to highlight biofunctional and biocompatible materials that have been adapted to VPP. We present and compare the suitability of these adapted materials to different medical applications and propose other biomaterials that could be further adapted to the VPP 3D printing process in order to fulfill patient-specific medical requirements.

The Outcome of Total Knee Arthroplasty for Patients with Psychiatric Disorders: A Single-Center Retrospective Study.

Background and Objectives: For some years, psychiatric illness has been a major factor in evaluating the results of total knee arthroplasty. As with other patient-related items, patients diagnosed with mental illness have higher costs of medical treatment, longer recovery, and longer hospital stays. The aim of this paper is to evaluate the role of mental diseases on the surgical outcome compared with the normal population. Materials and Methods: At our hospital, we undertook a retrospective study between June 2020 and January 2022. The experimental group consisted of patients with mental diseases including schizophrenia, bipolar disease, depression, substance uses, or other psychiatric disorders. The control group consisted of patients who underwent total knee arthroplasty and did not have a mental disease. Postoperative complications and length of stay were also recorded during the study. We used the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) and the Knee Society Score (KSS) as outcome measures. Results: Between June 2020 and January 2022, a total of 634 patients underwent total knee arthroplasty in our clinic, of which 239 had a mental disease. The majority of patients were female (61%), and the average length of stay was significantly longer for patients with mental illness (6.8 vs. 2.8 days). Preoperative WOMAC and KS function scores demonstrated statistically significant differences between groups (67.83 ± 17.8 vs. 62.75 ± 15.7 and 29.31 ± 19.8 vs. 34.98 ± 21.3). KS knee score did not show any significant differences preoperatively. All postoperative functional scores showed significantly better results for the control group compared to the mental illness group. Conclusions: Mental illness appears to be linked with lower TKA scores before and after the surgical procedure.

Prematurity-Risk Factor or Coincidence in Congenital Glaucoma?

Background and Objective: To correlate the intraocular pressure with the postconceptional age and identify a statistically significant connection between congenital glaucoma and prematurity. Materials and Methods: The current paper is a retrospective, comparative, case-control study. Data collection featured maternal age, gestational age at birth, birth weight, and intraocular ocular pressure (IOP) measurements. Results: Forty-two eyes of 21 children underwent examination. The participants were assigned into two groups. The Preterm-Glaucoma (PG) group included eight preterm-born children diagnosed with glaucoma, whereas the Preterm (P) group was comprised of premature newborns without the aforementioned condition. There was no statistically relevant difference in birth weight (p = 0.691078) nor in mean gestational age (p = 0.752623) between the two groups. The mean IOP in the PG group was 23.813 ± 4.5493, whereas in the P group, it ranged around 13.231 ± 1.0699, p < 0.0001. Using mixed-effects models, we obtained a reduction in IOP of 0.45 mmHg per week in the first month of life. A further weekly reduction of 0.36 mmHg was achieved in the next two months. Conclusions: The mean IOP of prematurely born children decreased with age. Our findings correlate with previously conducted studies, however, the drop in IOP values exceeded any data published so far. We found no correlation between prematurity and the incidence of congenital glaucoma.

Percutaneous Chevron Osteotomy: A Prospective Randomized Controlled Trial.

Introduction: Minimally invasive surgical techniques for hallux valgus have gained popularity, showing good results characterized by smaller postoperative scars, less pain, lower infection risk, and fewer wound complications. Given the lack of evidence available in our country regarding this subject, especially about this type of surgical technique, our paper aims to compare open and MIS approaches for chevron osteotomy. We evaluated the outcome and complications after 12 months. Materials and Methods: We undertook a prospective, randomized, controlled, single-center study between October 2017 and December 2020. The patients were randomized into two groups: one group that received percutaneous chevron osteotomy (MIS), and the other, open chevron osteotomy (OC). For clinical assessment, we determined the function and the level of pain using the Visual Analogue Scale (VAS) and The American Orthopaedic Foot and Ankle Surgery score (AOFAS). The VAS scale was measured before the surgical procedure, at discharge, and at 3 weeks, 6 weeks, 6 months, and 12 months after surgery. The AOFAS score was calculated preoperatively and after 6 months. The hallux angle (HVA) and intramedullary angle (IMA) were measured preoperatively, and at 6 weeks, 6 months and 12 months. Results: We included 26 cases in the open chevron osteotomy group (24 female, 2 male) and 24 in the MIS group (24 female, 0 male). Both groups demonstrated improvements regarding the IMA and HVA at the last follow-up without any significant differences between the groups at the final assessment. The VAS showed significantly better post-operative results for the MIS group at discharge (p < 0.001) and 3 weeks (p < 0.001), 6 weeks (p < 0.001), and 6 months (p = 0.004) post-surgery. The AOFAS showed no significant differences either before or after surgery. Four cases with screw prominence were reported, three of which belonged to the MIS group. Only one case with metatarsalgia was found in the OC group. Conclusions: This paper demonstrates that minimally invasive chevron osteotomy has comparable results with open chevron osteotomy, even though surgical time and radiological exposure are significantly longer. More studies are required to evaluate the complications and the risk of recurrences.

Preclinical study analysis of massive magnesium alloy graft for calcaneal fractures.

The highly comminuted calcaneal fractures represent a challenge for surgeons and require bone grafts for a good clinical outcome. Postoperative results are generally associated with increased morbidity and long periods of inactivity. The biomedical community promotes the use of artificial materials for grafts in order to achieve improved results. In an era when cosmetic concerns as well as the satisfaction of patients are mandatory and the use of autologous bone grafts is not without complications, an artificial replacement appears to be a favorable option. Synthetic bone grafts are known to fail under stress shield or are associated with systemic side effects. The purpose of the present study was to investigate and determine an already commercially available magnesium (Mg) alloy whose design is most suitable for long-term use. The mechanical properties of Mg1Ca and MgYREZr compared with normal cortical and cancellous bone were assessed. Another discussed aspect was the influence of the alloy in the graft fixation. The results revealed that Mg1Ca and MgYREZr alloys had a low tensile strength of 75 and 250 MPa, respectively. For this reason, it was surmised that MgYREZr alloy could be an optimal choice with favorable corrosion resistance. Since calcaneal fractures are prone to skin necrosis and septic complications, the need for antibacterial procedures and antibiotic prophylaxis is highlighted. Thus, an in vivo attempt was also made to identify the relationship between Mg alloy products and bacterial load. However, the most important feature of the present study was the creation of a 3D model grafting, with an anti-sliding design, which can be potentially used with the preferred Mg alloy in this type of fractures. In conclusion, artificial materials are the future in medicine, replacing the body-limiting capabilities of grafts. They are safe and incur less comorbidities. This method could pave the way for reducing patient discomfort and increasing patient satisfaction. Although further testing is required, this research represents a great starting point for calcaneal fractures.

Postoperative retinal microstructure and functional outcome after inverted-flap technique associated with silicone oil tamponade in macular hole surgery.

PURPOSE: Our retrospective study on 27 patients with a large mean macular hole diameter (MH-D) of 480.08±78.62 µm evaluates the usefulness of combining the current internal limiting membrane (ILM) inverted-flap surgical technique with silicone oil tamponade, which has been associated with the classical technique of ILM peeling. RESULTS: Functional results: mean visual acuity (VA) improved to 0.89±0.11 logMar (logarithm of the minimum angle of resolution, at one month), 0.67±0.03 logMar (at three months), 0.52±0.04 logMar (at six months), 0.42±0.15 logMar (at one year) postoperative (final VA), with statistical linkage between preoperative VA and final VA (two-sample t-test, p=0.007), mean MH-D and final VA (regression analysis, p=0.003). We compared the results by MH size (Group A ≤400 µm - eight eyes and Group B >400 µm - 19 eyes), finding statistical variance (Bonett & Levene methods). Group A presented a final VA of 0.21±0.12 logMar, while Group B had 0.51±0.17 logMar. Successful closure was noted in 25 (92.59%) cases, with Group A having complete closure and external limiting membrane (ELM) restoration with ellipsoid zone (EZ) regeneration in six cases. Group B had successful closure in 17 (89.47%) cases with ELM restoration in 16 cases and EZ regeneration in seven (38.88%) cases, with reintervention in two cases. Restoration of the ELM was correlated [Pearson's correlation coefficient (PCC) of 0.999, p=0.022] with successful closure, with overall restoration obtained in 24 (88.88%) cases and EZ regeneration in 13 (48.14%) cases. CONCLUSIONS: ILM inverted-flap technique with silicone oil tamponade had favorable functional and anatomical outcomes. ELM restoration was associated with successful MH closure.

Tricalcium phosphate and hydroxyapatite treatment for benign cavitary bone lesions: A prospective clinical trial.

Benign bone tumors are surgically treated by curettage and by filling the defect using bone grafts or bone substitutes, such as hydroxyapatite crystals and tricalcium phosphate. The tricalcium phosphate mixed with hydroxyapatite, although fragile, is a good alternative with good integration. Fifteen patients with benign bone lesions were randomized in two groups surgically treated by curettage and filling of the bone defect using allograft (7 cases) or a mixture of 35% tricalcium phosphate, with 60-85% pore volume, and 65% hydroxyapatite (8 cases). After the surgery, all patients were followed up every 3 weeks until 6 months, and then at 2 months interval until one year for the clinical and radiological assessment. The average age was 35.4 years (from 18 to 54) for the allograft group and 41 years (from 22 to 58) for the patients treated with bone substitute. Eight patients were male and seven female, with relatively equal distribution between both groups. The average bone defect was relatively equal: 14 cc (4-25 cc) for the allograft group and 15.1 cc (4-33 cc) for the ceramic group (P>0.1). During the follow-up, all the lesions gradually disappeared after 12 months, with a time of healing of 18.8 weeks (15-24 weeks) for the allograft group and 20.37 weeks (15-28) for the bone substitute group. There were no significant differences regarding the clinical status and the radiological assessment after 12 months. No patient required extra pain medication after 2 weeks. No complications have been recorded. The surgical treatment of small and medium sized lytic benign tumors has good results with both types of graft that were studied. Using tricalcium phosphate mixed with hydroxyapatite as bone substitute represents a good and low cost alternative, but it is a relatively fragile material with a slower time to integrate compared to the allograft.

A new perspective towards failure of gamma nail systems.

Uncommon causes of nail failures and surgical reinterventions were determined. The study included 23 osteoporotic patients, 13 of whom followed a fast recovery program with early walking (FWB group). The other 10 patients were not allowed full weight bearing until 6 weeks (NFWB group). The T-score was determined before surgery for all cases. A case with a nail breakage after a failed DCS implant fixed in another clinic was also analyzed. The nail was revised and the broken implant underwent a metallurgic and microscopic examination. The average T-score was 2.5 for the patients that followed the fast recovery program and 2.7 for the patients from non-full weight bearing. Four patients, 1 from the NFWB group and 3 from FWB group, presented a screw cut-out. It was found that the errors of the guiding instruments may create dents, scratches or micro-fractures on the titanium coating that lead to an early implant failure. Imperfect reduction leads to incorrect implant placement and a high incidence of failure. Damaging the titanium protective coating, in a low force, high cycles scenario can cause structural failure. Delays in fracture healing and material fatigue are the most common causes of nail failure and can lead to catastrophic complications.

Comparison of 360° circumferential trabeculotomy and conventional trabeculotomy in primary pediatric glaucoma surgery: complications, reinterventions and preoperative predictive risk factors.

PURPOSE: To quantify the postoperative complications and the need of re-operation after a single circumferential trabeculotomy versus a single conventional trabeculotomy, in 5 years follow-up, in patients who underwent primary pediatric glaucoma surgery. For each complication and each re-operation case, we calculate the risk of appearance pointing out the possible preoperative risk factors by establishing a statistical connection between the result and the values of preoperative IOP, corneal diameter, or axial length. METHODS: This was a retrospective study of patients aged 1 day to 3 years who underwent primary pediatric glaucoma surgery. A total of 45 patients (79 eyes) were followed up for at least 5 years. There were two groups: the 360° circumferential trabeculotomy with illuminated catheter group and the conventional trabeculotomy group. RESULTS: Hyphema was the most common post-operative complication occurring in 64 eyes (81.01%) 30 (78.95%) in the conventional group and 34 (82.93%) in the circumferential group. There have been 5 eyes (6.3%) that needed re-operation: 1 case of hypotony (7 mmHg) and 4 cases of postop hypertension, 1 case (2.43%) in the circumferential group and the rest of 4 cases (10.53%) in the conventional group. CONCLUSIONS: A preop IOP of 25 mmHg or more in the conventional group is statistically significant predictive (p = 0.023) for postop hyphema, as well as a preop IOP of 28 mmHg or more is predictive (p = 0.02) for the need of reintervention. Circumferential trabeculotomy has better results in time, similar complications and lower failure rates meaning less eyes requiring re-operation than conventional trabeculotomy.

Radiographic Evaluation of Alignment Following Total Knee Arthroplasty - a Systematic Review. Part II.

The aim of this second part is to review the existing described methods for measuring postoperative total knee arthroplasty (TKA) alignment in sagital and axial plane as well as the existing literature regarding the axial plane evaluation with the use of computer tomography. Given that the most frequent mistakes when positioning the total knee arthroplasty components are made in the axial plane, it is necessary to know what are the limits of radiographic evaluation, for which CT scan is the most valuable tool in assessing the rotation of the components.