Chemoenzymatic Synthesis of a New Germacrene Derivative Named Germacrene F.

The new farnesyl pyrophosphate (FPP) derivative with a shifted olefinic double bond from C6-C7 to C7-C8 is accepted and converted by the sesquiterpene cyclases protoilludene synthase (Omp7) as well as viridiflorene synthase (Tps32). In both cases, a so far unknown germacrene derivative was found to be formed, which we name "germacrene F". Both cases are examples in which a modification around the central olefinic double bond in FPP leads to a change in the mode of initial cyclization (from 1→11 to 1→10). For Omp7 a rationale for this behaviour was found by carrying out molecular docking studies. Temperature-dependent NMR experiments, accompanied by NOE studies, show that germacrene F adopts a preferred mirror-symmetric conformation with both methyl groups oriented in the same directions in the cyclodecane ring.

Bottom-up Solution Synthesis of Graphene Nanoribbons with Precisely Engineered Nanopores.

The incorporation of nanopores into graphene nanostructures has been demonstrated as an efficient tool in tuning their band gaps and electronic structures. However, precisely embedding the uniform nanopores into graphene nanoribbons (GNRs) at the atomic level remains underdeveloped especially for in-solution synthesis due to the lack of efficient synthetic strategies. Herein we report the first case of solution-synthesized porous GNR (pGNR) with a fully conjugated backbone via the efficient Scholl reaction of tailor-made polyphenylene precursor (P1) bearing pre-installed hexagonal nanopores. The resultant pGNR features periodic subnanometer pores with a uniform diameter of 0.6 nm and an adjacent-pores-distance of 1.7 nm. To solidify our design strategy, two porous model compounds (1 a, 1 b) containing the same pore size as the shortcuts of pGNR, are successfully synthesized. The chemical structure and photophysical properties of pGNR are investigated by various spectroscopic analyses. Notably, the embedded periodic nanopores largely reduce the π-conjugation degree and alleviate the inter-ribbon π-π interactions, compared to the nonporous GNRs with similar widths, affording pGNR with a notably enlarged band gap and enhanced liquid-phase processability.

Unsaturated amido-substituted six-vertex mixed silicon germanium clusters.

The synthesis of mixed silicon and germanium clusters SixGe6-x{N(SiMe3)Dipp}41-3 (x = 3.7, 3.1, 2.1) with amido-substituents and two unsubstituted germanium atoms was achieved in co-reductions using the tribromosilane {N(SiMe3)Dipp}SiBr3 and the tribromogermane {N(SiMe3)Dipp}GeBr3 in three different ratios. The ratio of Si and Ge used for the synthesis of 1-3 approximately corresponds to that in the final products. All compounds were characterized by single crystal X-ray diffraction and EI mass spectrometry. In addition, 1 and 2 were characterized by solid-state 29Si{1H} CP/MAS NMR spectroscopy and multinuclear NMR spectroscopy in solution.

Solution Synthesis and Characterization of a Long and Curved Graphene Nanoribbon with Hybrid Cove-Armchair-Gulf Edge Structures.

Curved graphene nanoribbons (GNRs) with hybrid edge structures have recently attracted increasing attention due to their unique band structures and electronic properties as a result of their nonplanar conformation. This work reports the solution synthesis of a long and curved multi-edged GNR (cMGNR) with unprecedented cove-armchair-gulf edge structures. The synthesis involves an efficient A2 B2 -type Diels-Alder polymerization between a diethynyl-substituted prefused bichrysene monomer (3b) and a dicyclopenta[e,l]pyrene-5,11-dione derivative (6) followed by FeCl3 -mediated Scholl oxidative cyclodehydrogenation of the obtained polyarylenes (P1). Model compounds 1a and 1b are first synthesized to examine the suitability and efficiency of the corresponding polymers for the Scholl reaction. The successful formation of cMGNR from polymer P1 bearing prefused bichrysene units is confirmed by FTIR, Raman, and solid-state NMR analyses. The cove-edge structure of the cMGNR imparts the ribbon with a unique nonplanar conformation as revealed by density functional theory (DFT) simulation, which effectively enhances its dispersibility in solution. The cMGNR has a narrow optical bandgap of 1.61 eV, as estimated from the UV-vis absorption spectrum, which is among the family of low-bandgap solution-synthesized GNRs. Moreover, the cMGNR exhibits a carrier mobility of ≈2 cm2 V-1 s-1 inferred from contact-free terahertz spectroscopy.

Cove-Edged Graphene Nanoribbons with Incorporation of Periodic Zigzag-Edge Segments.

Structurally precision graphene nanoribbons (GNRs) are promising candidates for next-generation nanoelectronics due to their intriguing and tunable electronic structures. GNRs with hybrid edge structures often confer them unique geometries associated with exotic physicochemical properties. Herein, a novel type of cove-edged GNRs with periodic short zigzag-edge segments is demonstrated. The bandgap of this GNR family can be tuned using an interplay between the length of the zigzag segments and the distance of two adjacent cove units along the opposite edges, which can be converted from semiconducting to nearly metallic. A family member with periodic cove-zigzag edges based on N = 6 zigzag-edged GNR, namely 6-CZGNR-(2,1), is successfully synthesized in solution through the Scholl reaction of a unique snakelike polymer precursor (10) that is achieved by the Yamamoto coupling of a structurally flexible S-shaped phenanthrene-based monomer (1). The efficiency of cyclodehydrogenation of polymer 10 toward 6-CZGNR-(2,1) is validated by FT-IR, Raman, and UV-vis spectroscopies, as well as by the study of two representative model compounds (2 and 3). Remarkably, the resultant 6-CZGNR-(2,1) exhibits an extended and broad absorption in the near-infrared region with a record narrow optical bandgap of 0.99 eV among the reported solution-synthesized GNRs. Moreover, 6-CZGNR-(2,1) exhibits a high macroscopic carrier mobility of ∼20 cm2 V-1 s-1 determined by terahertz spectroscopy, primarily due to the intrinsically small effective mass (m*e = m*h = 0.17 m0), rendering this GNR a promising candidate for nanoelectronics.

Reactivity of the Bicyclic Amido-Substituted Silicon(I) Ring Compound Si4 {N(SiMe3 )Mes}4 with FLP-Type Character.

The bicyclic amido-substituted silicon(I) ring compound Si4 {N(SiMe3 )Mes}4 2 (Mes=Mesityl=2,4,6-Me3 C6 H2 ) features enhanced zwitterionic character and different reactivity from the analogous compound Si4 {N(SiMe3 )Dipp}4 1 (Dipp=2,6-i Pr2 C6 H3 ) due to the smaller mesityl substituents. In a reaction with the N-heterocyclic carbene NHC Me 4 (1,3,4,5-tetramethyl-imidazol-2-ylidene), we observe adduct formation to give Si4 {N(SiMe3 )Mes}4 ⋅ NHC Me 4 (3). This adduct reacts further with the Lewis acid BH3 to yield the Lewis acid-base complex Si4 {N(SiMe3 )Mes}4 ⋅ NHC Me 4 ⋅ BH3 (4). Coordination of AlBr3 to 2 leads to the adduct 5. Calculated proton affinities and fluoride ion affinities reveal highly Lewis basic and very weak Lewis acidic character of the low-valent silicon atoms in 1 and 2. This is confirmed by protonation of 1 and 2 with Brookharts acid yielding 6 and 7. Reaction with diphenylacetylene only occurs at 111 °C with 2 in toluene and is accompanied by fragmentation of 2 to afford the silacyclopropene 8 and the trisilanorbornadiene species 9.

Light-induced switching of polymer-surfactant interactions enables controlled polymer thermoresponsive behaviour.

Hydroxypropyl cellulose (HPC) and arylazopyrazole (AAP) mixtures can be remotely controlled by light and temperature. We show that the hydrophobic interactions between HPC polymers with AAP surfactants can be drastically changed by changing the surfactants configuration through E/Z photo-isomerization. E-AAP interacts strongly with HPC which causes a dramatic increase of the critical temperature Tc of the polymers' phase transition and a loss of the coil-to-globule transition, while the hydrophobic interactions of HPC with Z-AAP are drastically reduced. As a result, E/Z photo-isomerization of AAP in mixtures with HPC offers remote control of the polymers phase transition, size and solution viscosity in an unprecedented way, and allows for new directions in colloid science.

A Curved Graphene Nanoribbon with Multi-Edge Structure and High Intrinsic Charge Carrier Mobility.

Structurally well-defined graphene nanoribbons (GNRs) have emerged as highly promising materials for the next-generation nanoelectronics. The electronic properties of GNRs critically depend on their edge topologies. Here, we demonstrate the efficient synthesis of a curved GNR (cGNR) with a combined cove, zigzag, and armchair edge structure, through bottom-up synthesis. The curvature of the cGNR is elucidated by the corresponding model compounds tetrabenzo[a,cd,j,lm]perylene (1) and diphenanthrene-fused tetrabenzo[a,cd,j,lm]perylene (2), the structures of which are unambiguously confirmed by the X-ray single-crystal analysis. The resultant multi-edged cGNR exhibits a well-resolved absorption at the near-infrared (NIR) region with a maximum peak at 850 nm, corresponding to a narrow optical energy gap of ∼1.22 eV. Employing THz spectroscopy, we disclose a long scattering time of ∼60 fs, corresponding to a record intrinsic charge carrier mobility of ∼600 cm2 V-1 s-1 for photogenerated charge carriers in cGNR.

A highly unsaturated six-vertex amido-substituted silicon cluster.

Thermal treatment of the bicyclo[1.1.0]tetrasilatetraamide [Si4{N(SiMe3)Dipp}4] 1 resulted in the formation of a highly unsaturated six-vertex silicon cluster [Si6{N(SiMe3)Dipp}4] 2 with only four amine-substituents and two ligand-free silicon atoms. In solution, a major and a minor conformer of this cluster are in equilibrium according to multinuclear NMR spectroscopy, lineshape analysis, DFT calculations and molecular dynamics simulations. The bonding situation in the highly unsaturated cluster features lone pair type character at the ligand-free silicon atoms and partial single and double bond character in the upper butterfly-shaped ring of 2. This allows to consider 2 as the silicon analogue of a butalene isomer.

Photo-Switchable Surfactants for Responsive Air-Water Interfaces: Azo versus Arylazopyrazole Amphiphiles.

Arylazopyrazoles (AAPs) as substitutes for azobenzene derivatives have gained considerable attention due to their superior properties offering E/Z photoisomerization with high yield. In order to compare and quantify their performance, azobenzene triethylammonium (Azo-TB) and arylazopyrazole triethylammonium (AAP-TB) bromides were synthesized and characterized in the bulk (water) using NMR and UV/Vis spectroscopy. At the air-water interface, complementary information from vibrational sum-frequency generation (SFG) spectroscopy and neutron reflectometry (NR) has revealed the effects of E/Z isomerization in great detail. In bulk water the photostationary states of >89% for E/Z switching in both directions were very similar for the surfactants, while their interfacial behavior was substantially different. In particular, the surface excess Γ of the surfactants changed drastically between E and Z isomers for AAP-TB (maximum change of Γ: 2.15 µmol/m2); for Azo-TB, the change was only moderate (maximum change of Γ: 1.02 µmol/m2). Analysis of SFG spectra revealed that strong nonresonant contributions that heterodyned the resonant vibrational bands were proportional to Γ, enabling the aromatic C-H band to be interpreted as an indicator for changes in the interfacial molecular order. Close comparison of Γ from NR with the SFG amplitude from the aromatic C-H stretch as a function of concentrations and E/Z conformation revealed substantial molecular order changes for AAP-TB. In contrast, only Γ and not the molecular order varied for Azo-TB. These differences in interfacial properties are attributed to the molecular structure of the AAP center that enables favorable lateral interactions at the air-water interface, causing closed-packed interfacial layers and substantial changes during E/Z photoisomerization.

Bis-Anthracene Fused Porphyrin as an Efficient Photocatalyst: Facile Synthesis and Visible-Light-Driven Oxidative Coupling of Amines.

Development of high-performance photocatalysts for the conversion of amines is of great importance, but has remained a challenging task. Here, a bis-anthracene fused porphyrin (AFP) was synthesized in a high yield by a facile synthetic protocol, which involves a Suzuki coupling for the conjugation of two anthracene groups with a porphyrin ring, followed by oxidative cyclodehydrogenation. When serving as a photocatalyst, AFP exhibits an outstanding photocatalytic performance for the visible-light-induced aerobic oxidation of amines to imines at ambient conditions. Density functional theory calculations revealed that the low energy band gap, caused by the large planar and π-extended porphyrin structure of AFP, contributed to its high photocatalytic performance.

Tuning Aqueous Supramolecular Polymerization by an Acid-Responsive Conformational Switch.

Besides their widespread use in coordination chemistry, 2,2'-bipyridines are known for their ability to undergo cis-trans conformational changes in response to metal ions and acids, which has been primarily investigated at the molecular level. However, the exploitation of such conformational switching in self-assembly has remained unexplored. In this work, the use of 2,2'-bipyridines as acid-responsive conformational switches to tune supramolecular polymerization processes has been demonstrated. To achieve this goal, we have designed a bipyridine-based linear bolaamphiphile, 1, that forms ordered supramolecular polymers in aqueous media through cooperative aromatic and hydrophobic interactions. Interestingly, addition of acid (TFA) induces the monoprotonation of the 2,2'-bipyridine moiety, leading to a switch in the molecular conformation from a linear (trans) to a V-shaped (cis) state. This increase in molecular distortion along with electrostatic repulsions of the positively charged bipyridine-H+ units attenuate the aggregation tendency and induce a transformation from long fibers to shorter thinner fibers. Our findings may contribute to opening up new directions in molecular switches and stimuli-responsive supramolecular materials.

Unexpected monolayer-to-bilayer transition of arylazopyrazole surfactants facilitates superior photo-control of fluid interfaces and colloids.

Interfaces that can change their chemistry on demand have huge potential for applications and are prerequisites for responsive or adaptive materials. We report on the performance of a newly designed n-butyl-arylazopyrazole butyl sulfonate (butyl-AAP-C4S) surfactant that can change its structure at the air-water interface by E/Z photo-isomerization in an unprecedented way. Large and reversible changes in surface tension (Δγ = 27 mN m-1) and surface excess (ΔΓ > 2.9 µmol m-2) demonstrate superior performance of the butyl-AAP-C4S amphiphile to that of existing ionic surfactants. Neutron reflectometry and vibrational sum-frequency generation spectroscopy reveal that these large changes are caused by an unexpected monolayer-to-bilayer transition. This exceptional behavior is further shown to have dramatic consequences at larger length scales as highlighted by applications like the light-triggered collapse of aqueous foam which is tuned from high (>1 h) to low (<10 min) stabilities and light-actuated particle motion via Marangoni flows.

Sulfur-anchored azulene as a cathode material for Li-S batteries.

A benzene-free and vinyl-free molecule, azulene, is used to polymerize with sulfur through inverse vulcanization. The sulfur radical promoted reaction mechanism has been studied through solid-state NMR experiments combined with DFT calculations. The as produced polymer has high sulfur content and can serve as a cathode material for Li-S batteries with longer lifetime stability compared to pure sulfur, providing a new protocol to develop new cathode materials for Li-S batteries.

Pathway Control in Cooperative vs. Anti-Cooperative Supramolecular Polymers.

Controlling the nanoscale morphology in assemblies of π-conjugated molecules is key to developing supramolecular functional materials. Here, we report an unsymmetrically substituted amphiphilic PtII complex 1 that shows unique self-assembly behavior in nonpolar media, providing two competing anti-cooperative and cooperative pathways with distinct molecular arrangement (long- vs. medium-slipped, respectively) and nanoscale morphology (discs vs. fibers, respectively). With a thermodynamic model, we unravel the competition between the anti-cooperative and cooperative pathways: buffering of monomers into small-sized, anti-cooperative species affects the formation of elongated assemblies, which might open up new strategies for pathway control in self-assembly. Our findings reveal that side-chain immiscibility is an efficient method to control anti-cooperative assemblies and pathway complexity in general.

Unraveling Concomitant Packing Polymorphism in Metallosupramolecular Polymers.

The phenomenon of polymorphism is ubiquitous in biological systems and has also been observed in various types of self-assembled materials in solution and in the solid state. In the field of supramolecular polymers, different kinetic vs thermodynamic self-assembled species may exist in competition, a phenomenon termed as pathway complexity. In these examples, the transient kinetic species often has a very short lifetime and rapidly converts into the thermodynamic product. In this work, we report a π-conjugated Pt(II) complex 1 that self-assembles in nonpolar medium into two competing supramolecular polymers with distinct molecular packing (slipped (A) vs pseudoparallel (B)) that do not interconvert over time in a period of at least six months at room temperature. Precise control of temperature, concentration, and cooling rate enabled us to ascertain the stability conditions of both species through a phase diagram. Extensive experimental studies and theoretical calculations allowed us to elucidate the packing modes of both supramolecular polymorphs A and B, which are stabilized by unconventional N-H···Cl-Pt and N-H···O-alkyl interactions, respectively. Under a controlled set of conditions of cooling rate and concentration, both polymorphs can be isolated concomitantly in the same solution without interconversion. Only if A is annealed at high temperature for prolonged time, does a slow transformation into B then take place via monomer formation. Our system, which in many respects bears close resemblance to concomitant packing polymorphism in crystals, should help bridge the gap between crystal engineering and supramolecular polymerization.