Multiscale Transfer Printing via Shape Memory Polymer with High Adhesion and Modulus Switchability.

Flexible electronics have gained significant attention as an innovative solution to meet the growing need for information collection from the human body and the environment. However, a critical challenge lies in the need for a transfer printing technique that can fabricate rigid and brittle devices on flexible organic substrates. Here, we develop a multiscale transfer printing technique using an ultraviolet-curable shape memory polymer (SMP) that serves as both the stamp and the receiver substrate. The SMP demonstrates exceptional mechanical performance with toughness at room temperature and remarkable flexibility near its glass transition temperature. The SMP material exhibits an impressive shape recovery ratio and remarkable adhesion switchability. We demonstrate robust transfer printing of diverse objects with different materials and morphologies and in situ transfer of multiscale metallic structures. In addition, the in situ fabricated transparent hyperthermia patches with embedded metal grids are demonstrated, offering potential application in the field of sensors, wearable devices, and electronic skin.

Optical vectorial-mode parity Hall effect: a case study with cylindrical vector beams.

The vectorial optical field (VOF) assumes a pivotal role in light-matter interactions. Beyond its inherent polarization topology, the VOF also encompasses an intrinsic degree of freedom associated with parity (even or odd), corresponding to a pair of degenerate orthogonal modes. However, previous research has not delved into the simultaneous manipulation of both even and odd parities. In this study, we introduce and validate the previously unexplored parity Hall effect for vectorial modes using a metasurface design. Our focus lies on a cylindrical vector beam (CVB) as a representative case. Through the tailored metasurface, we effectively separate two degenerate CVBs with distinct parities in divergent directions, akin to the observed spin states split in the spin Hall effect. Additionally, we provide experimental evidence showcasing the capabilities of this effect in multi-order CVB demultiplexing and parity-demultiplexed CVB-encoded holography. This effect unveils promising opportunities for various applications, including optical communication and imaging.

Wafer-Recyclable, Eco-Friendly, and Multiscale Dry Transfer Printing by Transferable Photoresist for Flexible Epidermal Electronics.

Flexible electronics have been of great interest in the past few decades for their wide-ranging applications in health monitoring, human-machine interaction, artificial intelligence, and biomedical engineering. Currently, transfer printing is a popular technology for flexible electronics manufacturing. However, typical sacrificial intermediate layer-based transfer printing through chemical reactions results in a series of challenges, such as time consumption and interface incompatibility. In this paper, we have developed a time-saving, wafer-recyclable, eco-friendly, and multiscale transfer printing method by using a stable transferable photoresist. Demonstration of photoresist with various, high-resolution, and multiscale patterns from the donor substrate of silicon wafer to different flexible polymer substrates without any damage is conducted using the as-developed dry transfer printing process. Notably, by utilizing the photoresist patterns as conformal masks and combining them with physical vapor deposition and dry lift-off processes, we have achieved in situ fabrication of metal patterns on flexible substrates. Furthermore, a mechanical experiment has been conducted to demonstrate the mechanism of photoresist transfer printing and dry lift-off processes. Finally, we demonstrated the application of in situ fabricated electrode devices for collecting electromyography and electrocardiogram signals. Compared to commercially available hydrogel electrodes, our electrodes exhibited higher sensitivity, greater stability, and the ability to achieve long-term health monitoring.

High-performance, large-area flexible SERS substrates prepared by reactive ion etching for molecular detection.

In the realm of molecular detection, the surface-enhanced Raman scattering (SERS) technique has garnered increasing attention due to its rapid detection, high sensitivity, and non-destructive characteristics. However, conventional rigid SERS substrates are either costly to fabricate and challenging to prepare over a large area, or they exhibit poor uniformity and repeatability, making them unsuitable for inspecting curved object surfaces. In this work, we present a flexible SERS substrate with high sensitivity as well as good uniformity and repeatability. First, the flexible polydimethylsiloxane (PDMS) substrate is manually formulated and cured. SiO2/Ag layer on the substrate can be obtained in a single process by using ion beam sputtering. Then, reactive ion etching is used to etch the upper SiO2layer of the film, which directly leads to the desired densely packed nanostructure. Finally, a layer of precious metal is deposited on the densely packed nanostructure by thermal evaporation. In our proposed system, the densely packed nanostructure obtained by etching the SiO2layer directly determines the SERS ability of the substrate. The bottom layer of silver mirror can reflect the penetrative incident light, the spacer layer of SiO2and the top layer of silver thin film can further localize the light in the system, which can realize the excellent absorption of Raman laser light, thus enhancing SERS ability. In the tests, the prepared substrates show excellent SERS performance in detecting crystalline violet with a detection limit of 10-11M. The development of this SERS substrate is anticipated to offer a highly effective and convenient method for molecular substance detection.

Pushing the thinness limit of silver films for flexible optoelectronic devices via ion-beam thinning-back process.

Reducing the silver film to 10 nm theoretically allows higher transparency but in practice leads to degraded transparency and electrical conductivity because the ultrathin film tends to be discontinuous. Herein, we developed a thinning-back process to address this dilemma, in which silver film is first deposited to a larger thickness with high continuity and then thinned back to a reduced thickness with an ultrasmooth surface, both implemented by a flood ion beam. Contributed by the shallow implantation of silver atoms into the substrate during deposition, the thinness of silver films down to 4.5 nm can be obtained, thinner than ever before. The atomic-level surface smooth permits excellent visible transparency, electrical conductivity, and the lowest haze among all existing transparent conductors. Moreover, the ultrathin silver film exhibits the unique robustness of mechanical flexibility. Therefore, the ion-beam thinning-back process presents a promising solution towards the excellent transparent conductor for flexible optoelectronic devices.

High-purity and wide-angle reflective structural colors based on an all-dielectric Fabry-Pérot cavity structure.

High-purity structural colors with low fabrication cost are in demand for their commercial applications. Here, we demonstrate an all-dielectric Fabry-Pérot cavity structure consisting of four-layer lossy and lossless dielectric films alternately stacked for producing high-purity and angle-invariant reflective colors. Multiple cavity resonances function together to significantly suppress the undesired reflection with the enhanced optical absorption, leading to a distinct and saturated color with a high efficiency of ∼70%. Besides, due to the high refractive indices of constituent materials, the color appearance of the designed structure can be maintained well at ±50° incident angle for two polarization states. The excellent color performance of the proposed device together with cost-effective manufacturing convenience opens up new avenues for their large-area applications in various areas.

Customizable Metal Micromesh Electrode Enabling Flexible Transparent Zn-Ion Hybrid Supercapacitors with High Energy Density.

Emerging flexible and wearable electronic products are placing a compelling demand on lightweight transparent energy storage devices. Owing to their distinguishing features of safety, high specific energy, cycling stability, and rapid charge/discharge advantages, Zn-ion hybrid supercapacitors are a current topic of discussion. However, the trade-off for optical transmittance and energy density remains a great challenge. Here, a high-performance Zn-ion hybrid supercapacitor based on the customizable ultrathin (5 µm), ultralight (0.45 mg cm-2 ), and ultra-transparent (87.6%) Ni micromesh based cathode and Zn micromesh anode with the highest figure of merit (84 843) is proposed. The developed flexible transparent Zn-ion hybrid supercapacitors reveal excellent cycle stability (no decline after 20 000 cycles), high areal energy density (31.69 µWh cm-2 ), and high power density (512 µW cm-2 ). In addition, the assembled solid flexible and transparent Zn-ion hybrid supercapacitor with polyacrylamide gel electrolyte shows extraordinary mechanical properties even under extreme bending and twisting operation. Furthermore, the full device displays a high optical transmittance over 55.04% and can be conformally integrated with diverse devices as a flexible transparent power supply. The fabrication technology offers seamless compatibility with industrial manufacturing, making it an ideal model for the advancement of portable and wearable devices.

Asymptotic dispersion engineering for ultra-broadband meta-optics.

Dispersion decomposes compound light into its monochromatic components, which is detrimental to broadband imaging but advantageous for spectroscopic applications. Metasurfaces provide a unique path to modulate the dispersion by adjusting structural parameters on a two-dimensional plane. However, conventional linear phase compensation does not adequately match the meta-unit's dispersion characteristics with required complex dispersion, hindering at-will dispersion engineering over a very wide bandwidth particularly. Here, we propose an asymptotic phase compensation strategy for ultra-broadband dispersion-controlled metalenses. Metasurfaces with extraordinarily high aspect ratio nanostructures have been fabricated for arbitrary dispersion control in ultra-broad bandwidth, and we experimentally demonstrate the single-layer achromatic metalenses in the visible to infrared spectrum (400 nm~1000 nm, NA = 0.164). Our proposed scheme provides a comprehensive theoretical framework for single-layer meta-optics, allowing for arbitrary dispersion manipulation without bandwidth restrictions. This development is expected to have significant applications in ultra-broadband imaging and chromatography detection, among others.

The practice of reaction window in an electrocatalytic on-chip microcell.

To enhance the efficiency of catalysis, it is crucial to comprehend the behavior of individual nanowires/nanosheets. A developed on-chip microcell facilitates this study by creating a reaction window that exposes the catalyst region of interest. However, this technology's potential application is limited due to frequently-observed variations in data between different cells. In this study, we identify a conductance problem in the reaction windows of non-metallic catalysts as the cause of this issue. We investigate this problem using in-situ electronic/electrochemical measurements and atom-thin nanosheets as model catalysts. Our findings show that a full-open window, which exposes the entire catalyst channel, allows for efficient modulation of conductance, which is ten times higher than a half-open window. This often-overlooked factor has the potential to significantly improve the conductivity of non-metallic catalysts during the reaction process. After examining tens of cells, we develop a vertical microcell strategy to eliminate the conductance issue and enhance measurement reproducibility. Our study offers guidelines for conducting reliable microcell measurements on non-metallic single nanowire/nanosheet catalysts.

5.7 GHz Ultrasensitive Shear Horizontal-Surface Acoustic Wave Humidity Sensor Based on LiNbO3/SiO2/SiC Heterostructures with a Sensitive Layer of Polyethyleneimine-SiO2 Nanocomposites.

Humidity sensing and water molecule monitoring have become hot research topics attributed to their potential applications in monitoring breathing/physiological conditions of humans, air conditioning in greenhouses, and soil moisture in agriculture. However, there is a huge challenge for highly sensitive and precision humidity detection with wireless and fast responsive capabilities. In this work, a hybrid/synergistic strategy was proposed using a LiNbO3/SiO2/SiC heterostructure to generate shear-horizontal (SH) surface acoustic waves (SAWs) and using a nanocomposite of polyethylenimine-silicon dioxide nanoparticles (PEI-SiO2 NPs) to form a sensitive layer, thus achieving an ultrahigh sensitivity of SAW humidity sensors. Ultrahigh frequencies (1∼15 GHz) of SAW devices were obtained on a high-velocity heterostructure of LiNbO3/SiO2/SiC. Among the multimodal wave modes, we selected SH waves for humidity sensing and achieved a high mass-sensitivity of 5383 MHz · mm2 · µg-1. With the PEI-SiO2 NP composite as the sensitive layer, an ultrahigh sensitivity of 2.02 MHz/% RH was obtained, which is two orders of magnitude higher than those of the conventional SAW humidity sensors (∼202.5 MHz frequency) within a humidity range of 20-80% RH.

Hyper-anti-freezing bionic functional surface to -90°C.

Freezing phenomenon has troubled people for centuries, and efforts have been made to lower the liquid freezing temperature, raise the surface temperature, or mechanical deicing. Inspired by the elytra of beetle, we demonstrate a novel functional surface for directional penetration of liquid to reduce icing. The bionic functional surface is fabricated by projection microstereolithography (PµSL) based three dimensional printing technique with the wettability on its two sides tailored by TiO2 nanoparticle sizing agent. A water droplet penetrates from the hydrophobic side to the superhydrophilic side of such a bionic functional surface within 20 ms, but it is blocked in the opposite direction. Most significantly, the penetration time of a water droplet through such a bionic functional surface is much shorter than the freezing time on it, even though the temperature is as low as -90°C. This work opens a gate for the development of functional devices for liquid collection, condensation, especially for hyperantifogging/freezing.

Dry-Transferable Photoresist Enabled Reliable Conformal Patterning for Ultrathin Flexible Electronics.

Photolithographic techniques, which are widely used in the silicon-based semiconductor industry, enable the manufacture of high-yield and high-resolution features at the micrometer and nanometer scales. However, conventional photolithographic processes cannot accommodate the micro/nanofabrication of flexible and stretchable electronics. In this study, a microfabrication approach that uses a synthesized, environmentally friendly, and dry-transferable photoresist to enable the reliable conformal manufacturing of thin-film electronics is reported, which is also compatible with the existing cleanroom processes. Photoresists with high-resolution, high-density, and multiscale patterns can be transferred onto various substrates in a defect-free and conformal-contact manner, thus enabling multiple wafer reuses. Theoretical studies are conducted to investigate the damage-free peel-off mechanism of the proposed approach. The in situ fabrication of various electrical components, including ultralight and ultrathin biopotential electrodes, has been demonstrated, which offer lower interfacial impedance, durability, and stability, and the components are applied to collect electromyography signals with superior signal-to-noise ratio (SNR) and quality. Additionally, an exemplary demonstration of a human-machine interface indicates the potential of these electrodes in many emerging applications, including healthcare, sensing, and artificial intelligence.

Wafer-Level Highly Dense Metallic Nanopillar-Enabled High-Performance SERS Substrates for Molecular Detection.

Seeking sensitive, large-scale, and low-cost substrates is highly important for practical applications of surface-enhanced Raman scattering (SERS) technology. Noble metallic plasmonic nanostructures with dense hot spots are considered an effective construction to enable sensitive, uniform, and stable SERS performance and thus have attracted wide attention in recent years. In this work, we reported a simple fabrication method to achieve wafer-scale ultradense tilted and staggered plasmonic metallic nanopillars filled with numerous nanogaps (hot spots). By adjusting the etching time of the PMMA (polymethyl methacrylate) layer, the optimal SERS substrate with the densest metallic nanopillars was obtained, which possessed a detection limit down to 10-13 M by using crystal violet as the detected molecules and exhibited excellent reproducibility and long-term stability. Furthermore, the proposed fabrication approach was further used to prepare flexible substrates; for example, a SERS flexible substrate was proven to be an ideal platform for analyzing low-concentration pesticide residues on curved fruit surfaces with significantly enhanced sensitivity. This type of SERS substrate possesses potential in real-life applications as low-cost and high-performance sensors.

Topologically optimized concentric-nanoring metalens with 1 mm diameter, 0.8†NA and 600†nm imaging resolution in the visible.

Metalenses can achieve diffraction-limited focusing via localized phase modification of the incoming light beam. However, the current metalenses face to the restrictions on simultaneously achieving large diameter, large numerical aperture, broad working bandwidth and the structure manufacturability. Herein, we present a kind of metalenses composed of concentric nanorings that can address these restrictions using topology optimization approach. Compared to existing inverse design approaches, the computational cost of our optimization method is greatly reduced for large-size metalenses. With its design flexibility, the achieved metalens can work in the whole visible range with millimeter size and a numerical aperture of 0.8 without involving high-aspect ratio structures and large refractive index materials. Electron-beam resist PMMA with a low refractive index is directly used as the material of the metalens, enabling a much more simplified manufacturing process. Experimental results show that the imaging performance of the fabricated metalens has a resolution better than 600 nm corresponding to the measured FWHM of 745 nm.

Programmable Nanoscale Crack Lithography for Multiscale PMMA Patterns.

Crack lithography is important for preparing microstructured materials. This strategic use of cracking breaks with the traditional idea that cracks are unwanted and has great potential for high-resolution and high-throughput production. However, the ability to control nanoscale crack patterning is still insufficient. Here, we present a nanoscale, programmable angle-dependent technique to control crack generation that relies on standard electron-beam lithography. Multiscale patterns of poly(methyl methacrylate) of arbitrary shape, geometric size, and large area were obtained, greatly expanding the processing capacity of electron-beam lithography. In addition, we observed the interaction between adjacent structures and cracks, which resulted in crack suppression or second-order cracks. We also demonstrated that angle-dependent nanoscale cracks can be used in physical unclonable functions and have great application prospects in the field of information security. We believe that our strategy for programmable nanoscale crack patterning provides new opportunities and perspectives for nanofabrication.

Ultrathin Lithiophilic 3D Arrayed Skeleton Enabling Spatial-Selection Deposition for Dendrite-Free Lithium Anodes.

Lithium metal batteries are promising to become a new generation of energy storage batteries. However, the growth of Li dendrites and the volume expansion of the anode are serious constraints to their commercial implementation. Herein, a controllable strategy is proposed to construct an ultrathin 3D hierarchical host of honeycomb copper micromesh loaded with lithiophilic copper oxide nanowires (CMMC). The uniquely designed 3D hierarchical arrayed skeletons demonstrate a surface-preferred and spatial-selective effect to homogenize local current density and relieve the volume expansion, effectively suppressing the dendrite growth. Employing the constructed CMMC current collector in a half-cell, >400 cycles with 99% coulombic efficiency at 0.5 mA cm-2 is performed. The symmetric battery cycles stably for >2000 h, and the full battery delivers a capacity of 166.6 mAh g-1 . This facile and controllable approach provides an effective strategy for constructing high-performance lithium metal batteries.

Angular momentum holography via a minimalist metasurface for optical nested encryption.

Metasurfaces can perform high-performance multi-functional integration by manipulating the abundant physical dimensions of light, demonstrating great potential in high-capacity information technologies. The orbital angular momentum (OAM) and spin angular momentum (SAM) dimensions have been respectively explored as the independent carrier for information multiplexing. However, fully managing these two intrinsic properties in information multiplexing remains elusive. Here, we propose the concept of angular momentum (AM) holography which can fully synergize these two fundamental dimensions to act as the information carrier, via a single-layer, non-interleaved metasurface. The underlying mechanism relies on independently controlling the two spin eigenstates and arbitrary overlaying them in each operation channel, thereby spatially modulating the resulting waveform at will. As a proof of concept, we demonstrate an AM meta-hologram allowing the reconstruction of two sets of holographic images, i.e., the spin-orbital locked and the spin-superimposed ones. Remarkably, leveraging the designed dual-functional AM meta-hologram, we demonstrate a novel optical nested encryption scheme, which is able to achieve parallel information transmission with ultra-high capacity and security. Our work opens a new avenue for optionally manipulating the AM, holding promising applications in the fields of optical communication, information security and quantum science.

Porous Metal-Organic Framework/ReS2 Heterojunction Phototransistor for Polarization-Sensitive Visual Adaptation Emulation.

Visual adaptation allows organisms to accurately perceive the external world even in dramatically changing environments, from dim starlight to bright sunlight. In particular, polarization-sensitive visual adaptation can effectively process the polarized visual information that is ubiquitous in nature. However, such an intriguing characteristic still remains a great challenge in semiconductor devices. Herein, a novel porous metal-organic-framework phototransistor with anisotropic-ReS2 -based heterojunction is demonstrated for polarization-sensitive visual adaptation emulation. The device exhibits intriguing polarized sensitivity and an adaptive ability due to its strong anisotropic and trapping-detrapping characteristics, respectively. A series of polarization-sensitive neuromorphic behaviors like polarization-perceptual excitatory postsynaptic current, multimode adjustable dichroic ratio and reconfigurable sensory adaption, are experimentally demonstrated through this porous heterojunction phototransistor. More importantly, with the polarization-electricity cooperation strategy, advanced polarization-sensitive visual adaptation with strong bottom-gate control and environment dependence is successfully realized. These results represent a significant step toward the new generation of intelligent visual perception systems in autonomous navigation and human-machine interaction, etc.