RESUMEN
ABSTRACT: Objective To discuss the application value of vehicle-pedestrian collision road traffic accidents reconstruction based on PC-Crash software in forensic identification. Methods A case of vehicle-pedestrian collision was chosen based on a tachograph, then PC-Crash software was applied to construct a vehicle-pedestrian collision model, and reconstruct the vehicle-pedestrian collision road traffic accident. Finally, the process of vehicle-pedestrian collision was reproduced. Results In accident reconstruction, when the car speed was lower than 50km/h, the landing point of the pedestrian after collision was in the front of the car. When the car speed was higher than 50 km/h, after collision, the pedestrian flipped towards the car roof and landed behind the car. With the increase of vehicle speed, throwing distance of the pedestrian increased continuously. When the vehicle collision speed reached 60 km/h, the experimental results in this case were basically consistent with the actual situation of the case. Head acceleration of the pedestrian was at the maximum ï¼1 655.70 m/s2ï¼ at 0.080 s. Chest acceleration of the pedestrian increased from 597.63 m/s2 to the peak 675.52 m/s2 at 0.055-0.060 s. Tibia acceleration of the pedestrian increased from 759.26 m/s2 to the first peak 1 367.06 m/s2, then reached the maximum speed ï¼1 718.19 m/s2ï¼ at 1.225 s. Conclusion The process of vehicle-pedestrian collision road traffic accidents can be reconstructed based on PC-Crash software under a situation of limited conditions, and can further clarify the speed of the vehicle, the location and degree of human body injury as well as the mechanism of damage of the pedestrian in the accident. Therefore, PC-Crash software has a certain practical value in forensic identification of road traffic accidents.
Asunto(s)
Accidentes de Tránsito , Peatones , Programas Informáticos , Aceleración , Ciencias Forenses , Cabeza , HumanosRESUMEN
With the development of the computer simulation technology and the digital simulation technology, the traditional calculation method has been gradually replaced by the digital method to deal the road traffic accident scene and analyse the process. The PC-Crash software simulation system can reconstruct the traffic accidents within 32 vehicles, and the accuracy of reconstruction has been fully verified, which is widely used by the transport police department and the accreditation agency. In this paper, the research of road traffic accident reconstruction using PC-Crash software is reviewed, and the application of road traffic accident reconstruction technology based on PC-Crash software and some existing problems in forensic practice are discussed, which provides reference for the research and identification of road traffic accident simulation and reconstruction and theoretical basis for accident treatment.