RESUMEN
Self-controlled hyperthermia is a non-invasive technique used to kill or destroy cancer cells while preserving normal surrounding tissues. We have explored bulk magnetic Ni-Si and Ni-Al alloys as a potential thermoseeds. The structural, magnetic and magnetocaloric properties of the samples were investigated, including saturation magnetisation, Curie temperature (TC), and magnetic and thermal hysteresis, using room temperature X-ray diffraction and magnetometry. The annealing time, temperature and the effects of homogenising the thermoseeds were studied to determine the functional hyperthermia applications. The bulk Ni-Si and Ni-Al binary alloys have Curie temperatures in the desired range, 316 K-319 K (43 °C-46 °C), which is suitable for magnetic hyperthermia applications. We have found that TC strictly follows a linear trend with doping concentration over a wide range of temperature. The magnetic ordering temperature and the magnetic properties can be controlled through substitution in these binary alloys.
Asunto(s)
Aluminio , Hipertermia Inducida , Níquel , Silicio , Aleaciones , Calor , Fenómenos Magnéticos , Neoplasias/terapiaRESUMEN
The magnetic, magnetotransport, and magnetocaloric properties near compound phase transitions in Ni50Mn35In14Z (Z = In, Ge, Al), and Ni48Co2Mn35In15 Heusler alloys have been studied using VSM and SQUID magnetometers (at magnetic fields (H) up to 5 T), four-probe method (at H = 0.005-1.5 T), and an adiabatic magnetocalorimeter (for H changes up to deltaH = 1.8 T), respectively. The martensitic transformation (MT) is accompanied by large magnetoresistance (up to 70%), a significant change in resistivity (up to 200%), and a sign reversal of the ordinary Hall effect coefficient, all related to a strong change in the electronic spectrum at the MT. The field dependences of the Hall resistance are complex in the vicinity of the MT, indicating a change in the relative concentrations of the austenite and martensite phases at strong fields. Negative and positive changes in adiabatic temperatures of about -2 K and +2 K have been observed in the vicinity of MT and Curie temperatures, respectively, for deltaH = 1.8 T.
RESUMEN
We have studied the structural and magnetic properties of Ni(2)MnGa(1-x)B(x) Heusler alloys with 0≤x≤0.25 using x-ray diffraction, thermal expansion, electrical resistivity, and magnetization measurements. The magnetization measurements were made within the temperature interval of 5-400 K and at applied magnetic field of 0-5 T. The samples with low B concentrations (x<0.05) were found to be of the cubic L2(1) phase at 300 K. A martensitic phase along with the cubic L2(1) phase appears for x≥0.05, and the amount of the martensitic phase was found to increase with increasing x. The critical concentration of the boron substitution (within which Heusler phases exist) was found to be around x = 0.1. The cubic cell parameter was observed to decrease with increasing x in the interval 0≤x≤0.1. The alloys were ferromagnetically ordered at 5 K and the saturation magnetization (M(S)) was found to decrease with increasing boron concentration. The Curie temperatures (T(C)) and martensitic transition temperatures (T(M)) for the alloys with 0≤x≤0.25 have been determined and a phase (T-x) diagram has been constructed. T(M) increases rapidly and T(C) decreases slowly with increasing B concentration in the interval 0≤x≤0.1. The dependence of the phase transition temperatures and magnetization on B concentration is discussed.
RESUMEN
The structural and magnetic properties of Ni(50)Mn(25+x)Sb(25-x) (0≤x≤18) Heusler alloys have been investigated by x-ray diffraction, magnetization, thermal expansion, and electrical resistivity measurements. Austenitic phases with the L2(1) cubic crystal cell and martensitic phases with Pmm2 orthorhombic structures have been observed at room temperature in alloys with 0≤x≤12.5 and 13≤x≤14, respectively. The Curie temperatures of the austenitic phases decrease linearly with increasing x and change from 370 (x = 0) to 340 K (x = 12.5). In the concentration 7
