On the origin of the biological effects of time varying magnetic fields: quantitative insights.

In a number of recently published experimental studies from our research group, the positive impact of magnetic stimuli (static/pulsed) on cell functionality modulation or bactericidal effects, in vitro, has been established. In order to develop a theoretical understanding of such magnetobiological effects, the present study aimed to present two quantitative models to determine magnetic Maxwell stresses as well as pressure acting on the cell membrane, under the influence of a time varying magnetic field. The model predicts that magnetic field-induced stress on the cell/bacteria is dependent on the conductivity properties of the extracellular region, which is determined to be too low to cause any significant effect. However, the force on the cell/bacteria due to the induced electric field is more influential than that of the magnetic field, which has been used to determine the membrane tension that can cause membrane poration. With a known critical membrane tension for cells, the field parameters necessary to cause membrane rupture have been estimated. Based on the experimental results and theoretically predicted values, the field parameters can be classified into three regimes, wherein the magnetic fields cause no effect or result in biophysical stimulation or induce cell death due to membrane damage. Taken together, this work provides some quantitative insights into the impact of magnetic fields on biological systems.

Biomineralized fluorocanasite-reinforced biocomposite scaffolds demonstrate expedited osteointegration of critical-sized bone defects.

The development of patient-specific bone scaffolds that can expedite bone regeneration has been gaining increased attention, especially for critical-sized bone defects or fractures. Precise adaptation of the scaffold to the region of implantation and reduced surgery times are also crucial at clinical scales. To this end, bioactive fluorcanasite glass-ceramic microparticulates were incorporated within a biocompatible photocurable resin matrix following which the biocomposite resin precursor was 3D-printed with digital light processing method to develop the bone scaffold. The printing parameters were optimized based on spot curing investigation, particle size data, and UV-visible spectrophotometry. In vitro cell culture with MG-63 osteosarcoma cell lines and pH study within simulated body fluid demonstrated a noncytotoxic response of the scaffold samples. Further, the in vivo bone regeneration ability of the 3D-printed biocomposite bone scaffolds was investigated by implantation of the scaffold samples in the rabbit femur bone defect model. Enhanced angiogenesis, osteoblastic, and osteoclastic activities were observed at the bone-scaffold interface, while examining through fluorochrome labelling, histology, radiography, field emission scanning electron microscopy, and x-ray microcomputed tomography. Overall, the results demonstrated that the 3D-printed biocomposite bone scaffolds have promising potential for bone loss rehabilitation.

Drug kinetics and antimicrobial properties of quaternary bioactive glasses 81S(81SiO2-(16-x)CaO-2P2O5-1Na2O-xMgO); an in-vitro study.

Bioactive glasses have recently been attracted to meet the challenge in bone tissue regeneration, repair, healing, dental implants, etc. Among the conventional bio-glasses, a novel quaternary mesoporous nano bio-glass with composition 81S(81SiO2-(16-x)CaO-2P2O5-1Na2O-xMgO) (x = 0, 1.6, 2.4, 4 and 8 mol%) employing Stober's method has been explored for examining the above potential application through in-vitro SBF assay, MTT assay, antimicrobial activity and drug loading and release ability. With increasing the MgO concentration up to 4 mol%, from in-vitro SBF assay, we observe that HAp layer develops on the surface of the nBGs confirmed from XRD, FTIR and FESEM. MTT assay using MG-63 cells confirms the biocompatibility of the nBGs having cell viability >225 % for MGO_4 after 72 h which is more than the clinically used 45S5 bio-glass. We have observed cell viability of >125 % even after 168 h. Moreover, MGO_4 is found to restrict the growth of E. coli by 65 % while S. aureus by 75 %, confirming the antimicrobial activity. Despite an increase in the concentration of magnesium, nBGs are found to be non-toxic towards the RBCs up to 4 mol% of MgO while for 8 %, the hemolysis percentage is >6 % which is toxic. Being confirmed MGO_4 nBG as a bioactive material, various concentrations of drug (Dexamethasone (DEX)) loading and release kinetics are examined. We show that 80 % of loading in case of 10 mg-ml-1 and 70 % of cumulative release in 100 h. The mesoporous structure of MGO_4 having an average pore diameter of 5 nm and surface area of 216 m2 g-1 confirmed from BET supports the loading and release kinetics. We conclude that the quaternary MGO_4 nBG may be employed effectively for bone tissue regeneration due to its high biocompatibility, excellent in-vitro cell viability, antimicrobial response and protracted drug release.

Accelerated Osteogenic Response of Electrodynamically Stimulated Mg1-xCaxSi1-xZrxO3 (x = 0-0.4) Bioelectrets.

MgSiO3-based biodegradable ceramics demonstrated remarkable potential for treating small-scale bone defects and temporary bone replacement. In addition, the dissolution behavior of MgSiO3 bioceramics can be tuned by doping of Ca and Zr elements at Mg and Si sites, respectively. The present study reported the influence of formation of Ca- and Zr-codoped Mg1-xCaxSi1-xZrxO3 (x = 0, 0.1, 0.2, 0.3, and 0.4) bioelectrets and electrodynamic stimulation toward improving their osteogenic response. Mg1-xCaxSi1-xZrxO3 electrets were successfully synthesized by a solid-state route. A detailed X-ray photoelectron spectroscopy (XPS) analyses revealed that the electrets produced oxygen-deficient active sites. The formation of Mg1-xCaxSi1-xZrxO3 electrets significantly increased the surface hydrophilicity. Inductively coupled plasma (ICP) analyses were used to examine the leaching behavior of Ca/Zr-codoped MgSiO3 bioceramics. In vitro cell culture analyses indicated that the osteogenesis of MG-63 cells was remarkably enhanced on the electrodynamic field-treated Mg1-xCaxSi1-xZrxO3 bioelectrets as compared to hydroxyapatite (HA). Moreover, a better osteogenic response was observed for higher concentrations of Ca (0.3 and 0.4) and Zr (0.3 and 0.4) doping in the MgSiO3 bioelectrets. Further, the mechanism of enhanced cellular functionality was revealed by the measurement of intracellular Ca2+.

Piezoelectric nanogenerators for self-powered wearable and implantable bioelectronic devices.

One of the recent innovations in the field of personalized healthcare is the piezoelectric nanogenerators (PENGs) for various clinical applications, including self-powered sensors, drug delivery, tissue regeneration etc. Such innovations are perceived to potentially address some of the unmet clinical needs, e.g., limited life-span of implantable biomedical devices (e.g., pacemaker) and replacement related complications. To this end, the generation of green energy from biomechanical sources for wearable and implantable bioelectronic devices gained considerable attention in the scientific community. In this perspective, this article provides a comprehensive state-of-the-art review on the recent developments in the processing, applications and associated concerns of piezoelectric materials (synthetic/biological) for personalized healthcare applications. In particular, this review briefly discusses the concepts of piezoelectric energy harvesting, piezoelectric materials (ceramics, polymers, nature-inspired), and the various applications of piezoelectric nanogenerators, such as, self-powered sensors, self-powered pacemakers, deep brain stimulators etc. Important distinction has been made in terms of the potential clinical applications of PENGs, either as wearable or implantable bioelectronic devices. While discussing the potential applications as implantable devices, the biocompatibility of the several hybrid devices using large animal models is summarized. This review closes with the futuristic vision of integrating data science approaches in developmental pipeline of PENGs as well as clinical translation of the next generation PENGs. STATEMENT OF SIGNIFICANCE: Piezoelectric nanogenerators (PENGs) hold great promise for transforming personalized healthcare through self-powered sensors, drug delivery systems, and tissue regeneration. The limited battery life of implantable devices like pacemakers presents a significant challenge, leading to complications from repititive surgeries. To address such a critical issue, researchers are focusing on generating green energy from biomechanical sources to power wearable and implantable bioelectronic devices. This comprehensive review critically examines the latest advancements in synthetic and nature-inspired piezoelectric materials for PENGs in personalized healthcare. Moreover, it discusses the potential of piezoelectric materials and data science approaches to enhance the efficiency and reliability of personalized healthcare devices for clinical applications.

LTE-NBP with holistic UWB-WBAN approach for the energy efficient biomedical application.

Increased use of ultra-wideband (UWB) in biomedical applications based on wireless body area networks (WBAN) opens a variety of options in the field of biomedical research. WBAN may aid in the continuous health monitoring of patients while they go about their everyday lives. Many studies and researchers were conducted several experimentations in the same field for the performance improvement. This study covered the hybridization of UWB technology, as well as on-body, off-body, and human-body ultra-wideband communication (HB-UWB). In this paper, the parameters considered are throughput, energy consumption, energy efficiency, energy used, network survival and delay. An improved model for design and assessment of power-saving UWB-WBAN was developed in this paper. A novel protocol model was introduced in this paper, namely low-power traffic-aware emergency based narrowband protocol (LTE-NBP) to overcome the major drawbacks of emergency, critical data transmission, reliability and the power issues in UWB-WBAN. It's the emergency-based low-power traffic-aware narrowband protocol. It is based on the dual-band physical layer technology. The suggested protocol considered an aware traffic model and an emergency medium access control (MAC) protocol. The proposed model's performance was evaluated and compared with the related algorithms on different performance parameters. The improved model is found to be efficient in throughput, energy efficiency, energy consumption, and delay.

Concepts of circular economy for sustainable management of electronic wastes: challenges and management options.

The electronic and electrical industrial sector is exponentially growing throughout the globe, and sometimes, these wastes are being disposed of and discarded with a faster rate in comparison to the past era due to technology advancements. As the application of electronic devices is increasing due to the digitalization of the world (IT sector, medical, domestic, etc.), a heap of discarded e-waste is also being generated. Per-capita e-waste generation is very high in developed countries as compared to developing countries. Expansion of the global population and advancement of technologies are mainly responsible to increase the e-waste volume in our surroundings. E-waste is responsible for environmental threats as it may contain dangerous and toxic substances like metals which may have harmful effects on the biodiversity and environment. Furthermore, the life span and types of e-waste determine their harmful effects on nature, and unscientific practices of their disposal may elevate the level of threats as observed in most developing countries like India, Nigeria, Pakistan, and China. In the present review paper, many possible approaches have been discussed for effective e-waste management, such as recycling, recovery of precious metals, adopting the concepts of circular economy, formulating relevant policies, and use of advance computational techniques. On the other hand, it may also provide potential secondary resources valuable/critical materials whose primary sources are at significant supply risk. Furthermore, the use of machine learning approaches can also be useful in the monitoring and treatment/processing of e-wastes. HIGHLIGHTS: In 2019, ~ 53.6 million tons of e-wastes generated worldwide. Discarded e-wastes may be hazardous in nature due to presence of heavy metal compositions. Precious metals like gold, silver, and copper can also be procured from e-wastes. Advance tools like artificial intelligence/machine learning can be useful in the management of e-wastes.

Effect of carbon quantum dots derived from extracts of UV-B-exposed Eclipta alba on alcohol-induced liver cirrhosis in Golden Hamster.

The Eclipta alba plant is considered hepatoprotective, owing to its phytoconstituents wedelolactone. In the current study, effect of elevated ultraviolet-B (eUV-B) radiation was investigated on biochemical, phytochemical, and antioxidative enzymatic activities of E. alba (Bhringraj) plant. The UV-B exposure resulted in an increase in oxidative stress, which has caused an imbalance in phytochemical, biochemical constituents, and induced antioxidative enzymatic activities. It was observed that the UV-B exposure promoted wedelolactone yield by 23.64%. Further, the leaf extract of UV-B-exposed plants was used for the synthesis of carbon quantum dots (CQDs) using low cost, one-step hydrothermal technique and its biocompatibility was studied using in vitro MTT (3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide) assay on HepG2 liver cell line. It revealed no toxicity in any treatment groups in comparison to the control. Both CQDs and leaf extract were orally administered to the golden hamster suffering from alcohol-induced liver cirrhosis. In the morphometric study, it was clearly observed that a combination of UV-B-exposed leaf extract and synthesized CQDs delivered the best result with maximum recovery of liver tissues. The present study reveals the positive impact of UV-B exposure on the medicinally important plant, increased yield of wedelolactone, and its enhanced hepatoprotective efficacy for the treatment of damaged liver tissues.

An in vivo toxicity assessment of piezoelectric sodium potassium niobate [NaxK1-xNbO3 (x = 0.2-0.8)] nanoparticulates towards bone tissue engineering approach.

One of the recent challenges in the design/development of prosthetic orthopedic implants is to address the concern of local/systemic toxicity of debris particles, released due to wear or degradation. Such debris particles often lead to inflammation at the implanted site or aseptic loosening of the prosthesis which results in failure of the implant during long run. Several in vitro studies demonstrated the potentiality of piezoelectric sodium potassium niobate [NaxK1-xNbO3 (x = 0.2, 0.5, 0.8), NKN] as an emerging next-generation polarizable orthopedic implant. In this perspective, we performed an in vivo study to examine the local and systemic toxicity of NKN nanoparticulates, as a first report. In the present study, male Wistar rats were intra-articularly injected to the knee joint with 100 µl of NKN nanoparticulates (25 mg/ml in normal saline). After 7 days of exposure, the histopathological analyses demonstrate the absence of any inflammation or dissemination of nanoparticulates in vital organs such as heart, liver, kidney and spleen. The anti-inflammatory cytokines (IL-4 and IL-10) profile analyses suggest the increased anti-inflammatory response in the treated rats as compared to non-injected (control) rats, preferably for the sodium and potassium rich NKN i.e., Na0.8K0.2NbO3 and Na0.2K0.8NbO3. The biochemical analyses revealed no pathological changes in the liver and kidney of particulate treated rats. The present study is the first proof to confirm the non-toxic nature of NKN nanoparticulates which provides a step forward towards the development of prosthetic orthopedic implants using biocompatible piezoelectric NKN ceramics.

Interplay of surface polarization charge, dynamic electrical stimulation and compositional modification towards accelerated osteogenic response of NaxK1-xNbO3 piezo-bioceramics.

Bone remodeling processes involve endogenous bioelectrical signals such as piezoelectric charges. Moreover, external electrical stimulation helps in improving the healing capability of injured tissues by modulating the metabolic signaling pathways of cells. Towards this end, the present study reveals the influence of the combined action of electrostatic surface polarization charge and dynamic pulsed electrical stimulation alongwith compositional modification towards improving the osteogenic response of emerging piezo-bioceramics, sodium potassium niobate [NaxK1-xNbO3 (x = 0.2-0.8), NKN]. The dependence of crystal structure on compositions (x) was retrieved by Rietveld refinement and X-ray peak profile analyses. The surface charge, stored in the polarized (@ 25 kV at 500 °C) NaxK1-xNbO3 (x = 0.2, 0.5, 0.8) samples were measured to be 0.52, 0.50 and 0.47 µC/cm2, respectively, using thermally stimulated depolarized current (TSDC). X-ray photoelectron spectroscopy (XPS) survey scan spectra revealed that the polarization process does not alter the surface chemistry of NKN. Negatively charged surfaces are observed to accelerate early-stage adhesion of osteoblast-like cells which further results in enhanced spreading of adhered cells. Subsequently, the dynamic pulsed electrical stimulation of 1 V/cm with the pulse duration of 400 µs was applied, while the cells were being adhered on electrostatically charged surfaces. The quantitative and qualitative analyses revealed that the synergistic action of electrostatic surface polarization charge and dynamic pulsed electrical stimulation further accelerates cell proliferation and differentiation on negatively charged surfaces of Na and K-rich compositions of NKN. The mechanism of augmented cellular activity was analyzed using intracellular Ca2+ measurement.

Recent advances in materials science: a reinforced approach toward challenges against COVID-19.

With the recent COVID-19 pandemic, medical professionals and scientists have encountered an unprecedented trouble to make the latest technological solutions to work. Despite of abundant tools available as well as initiated for diagnosis and treatment, researchers in the healthcare systems were in backfoot to provide concrete answers to the demanding challenge of SARS-CoV-2. It has incited global collaborative efforts in every field from economic, social, and political to dedicated science to confront the growing demand toward solution to this outbreak. Field of materials science has been in the frontline to the current scenario to provide major diagnostic tools, antiviral materials, safety materials, and various therapeutic means such as, antiviral drug design, drug delivery, and vaccination. In the present article, we emphasized the role of materials science to the development of PPE kits such as protecting suits, gloves, and masks as well as disinfection of the surfaces/surroundings. In addition, contribution of materials science towards manufacturing diagnostic devices such as microfluidics, immunosensors as well as biomaterials with a point of care analysis has also been discussed. Further, the efficacy of nanoparticles and scaffolds for antiviral drug delivery and micro-physiological systems as well as materials derived from human tissues for extracorporeal membrane oxygenation (ECMO) devices have been elaborated towards therapeutic applications.

Improved antibacterial and cellular response of electrets and piezobioceramics.

The bacterial contamination in implants has been recognized as one of the key issues in orthopedics. In this article, a new technique of electrical polarization of various non-piezoelectric and piezoelectric biocompatible ceramics has been explored to develop antibacterial implants. Optimally processed hydroxyapatite (HA), BaTiO3 (BT), CaTiO3 (CT), Na0.5K0.5NbO3 (NKN) and their composites have been used as model biomaterials to verify the concept. The phase evolution analyses and microstructural characterizations were performed for sintered samples. The samples were polarized at polarizing voltage and temperature of 20 kV and 500°C, respectively, for 30 min. The hydrophilicity of polarized surfaces was examined using deionized water and culture media. The polarization induced in-vitro antibacterial study was performed for both, gram positive and gram negative bacteria. The viability of Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) bacteria reduces significantly on the polarized surfaces. In addition, the influence of polarization on antibacterial response has been explored via various mechanisms such as development of reactive oxygen species (ROS), catalase activity and lipoperoxidation. Furthermore, the cellular response of polarized surfaces was also examined using SaOS2 and MG-63 cells. The viability of SaOS2 and MG-63 cells was observed to increase significantly on negatively polarized surfaces. Overall, the surface treatment enhances the antibacterial response of HA, NKN, BT, CT and their composites surfaces with positive influence on cellular response.

Synthesis and characterization of novel protein nanodots as drug delivery carriers with an enhanced biological efficacy of melatonin in breast cancer cells.

Melatonin is a potent antioxidant, chemotherapeutic and chemo preventive agent against breast cancer. However, its short half-life is one of the major limitations in its application as a therapeutic drug. To overcome this issue, the green-emitting protein nanodot (PND) was synthesized by a one-step hydrothermal method for loading melatonin. The synthesized pH-7 and pH-2 PND showed a quantum yield of 22.1% and 14.0%, respectively. The physicochemical characterization of both PNDs showed similar morphological and functional activities. Furthermore, the biological efficacy of melatonin-loaded PND (MPND) was evaluated in a breast cancer cell line (MDA-MB-231) for live-cell imaging and enhanced nano-drug delivery efficacy. Interestingly, the permeability of neutral pH PND in both cell cytoplasm and nucleus nullifies the limitations of real-time live-cell imaging, and ensures nuclear drug delivery efficacy. Neutral pH PND showed better cell viability and cytotoxicity as a fluorescence bioimaging probe compared to acidic PND. The bioavailability and cell cytotoxicity effect of MPND on MDA-MB-231 breast cancer cells were studied through confocal and migration assay. Results showed that MPND causes enhanced bioavailability, better cellular uptake, and inhibition of the migration of breast cancer cells as compared to the drug alone. Besides, the synthesized MPND showed no sign of fluorescence quenching even at a high concentration of melatonin, making it an ideal nanocarrier for bioimaging and drug delivery.

Effect of pre-existing diseases on COVID-19 infection and role of new sensors and biomaterials for its detection and treatment.

The entire world is suffering from a new type of viral disease, occurred by severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2). The present article briefly discussed the genome sequencing and interaction of host cells with SARS-CoV-2. The influence of pre-existing diseases such as diabetes, heart disease and age of the patients on COVID-19 infection is reviewed. The possible treatments of SARS-CoV-2 including antiviral drugs, Chinese traditional treatment and plasma therapy are elaborately discussed. The proper vaccine for COVID-19 is not available till date. However, the trials of pre-existing antiviral vaccines such as, chloroquine/hydroxychloroquine, remdesivir, ritonavir and lopinavir and their consequences are briefly presented. Further, the importance of new materials and devices for the detection and treatment of COVID-19 has also been reviewed. The polymerase chain reaction (PCR)-based, and non-PCR based devices are used for the detection of COVID-19 infection. The non-PCR based devices provide rapid results as compared to PCR based devices.

Antibacterial and cellular response of piezoelectric Na0.5K0.5NbO3modified 1393 bioactive glass.

In the present study, the combined effect of addition of varying concentrations (10-30 vol%) of biocompatible piezoelectric Na0.5K0.5NbO3 (NKN) as well as electrostatic and dynamic pulsed electrical treatment on antibacterial and cellular response of 1393 bioactive glass (1393 BG) has been examined. The phase analyses of the sintered (at 800 °C for 30 min) samples revealed the formation of 1393 BG - NKN composites without any appearance of secondary phases. The addition of 10-30 vol% NKN significantly improved the mechanical behaviour of 1393 BG like, hardness (1.7 to 2 times), fracture toughness (1.3 to 2.6 times), compressive (2.3 to 8 times) and flexural strengths (2 to 3.5 times) than monolithic 1393 BG. The piezoelectric NKN is observed to induce the antibacterial activity in 1393 BG - (10- 30 vol%) NKN composites, while Staphylococcus aureus (S. aureus, gram positive) and Escherichia coli (E. coli, gram negative) bacterial cells were exposed to unpolarized and polarized (20 kV, 500°C for 30 min) sample surfaces. The antibacterial response was examined using disc diffusion, nitro blue tetrazolium (NBT) and MTT assays. The statistical analyses revealed the significant reduction in the viability of bacterial cells on polarized 1393 BG - (10- 30 vol%) NKN composite samples. In addition, the combined effect of electrostatic and dynamic pulsed electrical stimulation (1 V/cm, 500 µs pulses) on the cellular response of 1393 BG and 1393 BG - 30 vol% NKN composites has been analysed with MG-63 osteoblast-like cells. The cell proliferation was observed to increase significantly for the dynamic pulsed electric field treated negatively charged surfaces.

Electrical stimulation and piezoelectric biomaterials for bone tissue engineering applications.

Bioelectrical phenomenon in natural bone has been well recognized for its role in bone development and fracture healing. For example, the piezoelectricity induced modulation in cellular functionality assists in the repair and regeneration of bone tissue. Against this backdrop, we review here the origin of dielectric and electrical responses (piezo-, pyro- and ferro-electricity) of natural bone along with their consequences in regulating the bone metabolic activities. The concept of piezoelectricity induced osteogenesis has driven the development of piezoimplants for bone regeneration applications. A number of recent studies have been critically analyzed to demonstrate as to how the surface charge polarization or electric field stimulation together with functional properties of piezoelectric biomaterials can synergistically modulate cell functionality, in vitro or tissue regeneration, in vivo. The examples are drawn from a range of piezoelectric bioceramics, (e.g. barium titanate, magnesium silicate etc.) and biopolymers (e.g. polyvinylidene fluoride (PVDF), collagen, etc). The challenging problem of processing the compositionally tailored bioceramics is emphasized in particular reference to (Na, K)NbO3, an implantable biomaterial with the most attractive combination of piezoresponsive properties. Taken together, this review comprehensively emphasizes the appealing relevance of piezo-bioceramics and piezo-biopolymers as next-generation orthopedic biomaterials.

Synthesis of biocompatible, BSA capped fluorescent CaCO3 pre-nucleation nanoclusters for cell imaging applications.

Novel, photostable, multicolour fluorescent, highly biocompatible, water soluble, BSA capped pre-nucleation CaCO3 nanoclusters (FCPN) (∼1.3 nm) are developed using a facile biomineralization process. M. oleifera leaf extract and BSA protein are used as sources of ascorbic acid and capping agent, respectively. The developed FCPN shows fluorescence in the blue, green, and yellow/red region with an average life time of 1.05, 6.23 and 30.60 ns, respectively. The MALDI-MS measurements reveal that these nanoclusters are 16, 50, 73, 222 and 936 molecules big. These FCPN, when incubated (up to 7 days) with MG-63 cells, demonstrate an increase in cell viability percentage with time period as compared to their control samples. Furthermore, these incubated cells were investigated using confocal microscopy to estimate the FCPN diffusion penetration depth using CTCF analysis. It has been observed that blue and green emitting FCPN penetrated 6 µm, whereas red emitting FCPN traversed only 4 µm. The relative quantum yield (Rhodamine 6G = 0.92) of FCPN for green emission was found to be 0.0175 in water. The prepared nanoclusters displayed four months shelf-life. These FCPN were prepared using an environmentally benign, inexpensive, green synthetic route without using toxic reducing agents. Furthermore, the current report discusses the detailed results, obtained from X-ray photoelectron spectroscopy, MALDI-MS, Fourier transform infrared spectroscopy, UV-visible, fluorescence spectroscopy, lifetime measurements, electron microscopy, fluorescence microscopy and confocal microscopy.

Development of luminescent atacamite nanoclusters for bioimaging and photothermal applications.

Fluorescent atacamite nanoclusters (FANCs) have been developed and modified with silica for Drosophila salivary gland tissue imaging and photothermally induced cell death of osteosarcoma MG-63 cells. FANCs were synthesized with Moringa oleifera leaf extract without using any hazardous reducing and external capping agents. FANC was further used to evaluate light absorption, fluorescence emission, band gap, and magnetic properties as the first report on such nanoclusters. Upon excitation with a 350 nm light source, FANCs exhibited fluorescence at 460 nm, with a relative quantum yield of 0.3%. Besides, silica-encapsulated fluorescent atacamite nanoclusters (SEFANC) manifested remarkable improvement in emission, quantum yield (1.7%), shelf-life (15 d), biocompatibility, and photostability. Concomitantly, it has also increased the absorption in the near-infrared region and demonstrated high heat generation potential (42 °C → 50 °C). The above results suggest that FANC can be a potential candidate in the area of nanomedicine for a number of applications such as bioimaging, photothermal therapy, etc.

Sandalwood-derived carbon quantum dots as bioimaging tools to investigate the toxicological effects of malachite green in model organisms.

Malachite green is an N-methylated diaminophenylmethane dye that has generated much concern over its suggestive carcinogenic nature. After its excessive use in aquaculture industry as an effective ectoparasitide, much debate was raised over its toxicological effects leading to scientific studies conducted on animal models. Even after several bans, malachite green is still easily available in many parts of the world and unscrupulously even used to give green vegetables a fresher look. This study aims to address this concern by systematically studying the toxicological effects of malachite green through bioimaging in plant and animal cell and tissue. Sandalwood-derived carbon quantum dots have been used as a bioimaging tool since they are non-cytotoxic and show excellent fluorescence properties. Onion tissues demonstrate the translocation of the dye inside cells having high affinity for the nuclei and cell walls. Toxicological effects on the growth of Vigna radiata (mung beans) have been studied methodically. Bioimaging of the transverse cross-section of the dye-treated plant root shows a significant difference from the control. In animal cells, dose-dependent decrease in cell viability of MG-63 cells was observed with MG. CQD showed good fluorescence in both cytoplasm and nucleus of MG63 cells. In addition, CQDs were employed as a great tool for bioimaging of the histopathologically adverse effects of MG in Golden hamster animal model. This study showed CQDs could be used as an alternative non-site specific fluorescent probe for cell and tissue imaging for better visualization of cell and tissue architectural changes.

Electro-mechanical and Polarization-Induced Antibacterial Response of 45S5 Bioglass-Sodium Potassium Niobate Piezoelectric Ceramic Composites.

Besides the excellent osteoconductivity and biocompatibility of 45S5 bioglass (BG), poor mechanical and electrical properties as well as susceptibility toward bacterial adhesion limit its widespread clinical applications. In this context, the present study investigates the effect of addition of piezoelectric sodium potassium niobate (Na0.5K0.5NbO3; NKN) on mechanical, dielectric, and antibacterial response of BG. BG-xNKN (x = 0, 10, 20, and 30 vol%) composites were synthesized at 800 °C for 30 min. The phase analyses using spectral techniques revealed the formation of the composite without any reaction between BG and piezoelectric ceramic NKN. The dielectric and electrical measurements were performed over a wide range of temperature (30-500 °C) and frequency (1 Hz-1 MHz) which suggests that space charge and dipolar polarizations are the dominant polarization mechanisms. The complex impedance analyses suggest that the average activation energies for grain and grain boundary resistances for BG-xNKN (x = 10, 20, and 30 vol%) composites are 0.59, 0.87, 0.94 and 0.76, 0.93, 1.06 eV, respectively. The issue of bacterial infection has been addressed by electrical polarization of the developed composite samples, at 20 kV for 30 min. Statistical analyses reveal that the viability of Gram-positive (S. aureus) and Gram-negative (E. coli) bacterial cells has been reduced significantly on positively and negatively charged BG-NKN composite samples, respectively. The qualitative analyses using the Kirby-Bauer test supports the above findings. Nitro blue tetrazolium and lipid peroxide assays were performed to understand the mechanism of such antibacterial response, which suggested that the combined effect of NKN addition and polarization significantly enhances the superoxide production, which kills the bacterial cells. Overall, incorporation of NKN in BG enhances the mechanical, electrical, and dielectric properties as well as improves the antibacterial response of polarized BG-xNKN composites.