Unusual behavior of the aqueous solutions of gemini bispyridinium surfactants: apparent and partial molar enthalpies of the dimethanesulfonates.

Apparent and partial molar enthalpies at 298 K of the aqueous solutions of cationic gemini surfactants 1,1'-didodecyl-2,2'-dimethylenebispyridinium dimethanesulfonate (12-Py(2)-2-(2)Py-12 MS); 1,1'-didodecyl-2,2'-trimethylenebispyridinium dimethanesulfonate (12-Py(2)-3-(2)Py-12 MS); 1,1'-didodecyl-2,2'-tetramethylenebispyridinium dimethanesulfonate (12-Py(2)-4-(2)Py-12 MS); 1,1'-didodecyl-2,2'-octamethylenebispyridinium dimethanesulfonate (12-Py(2)-8-(2)Py-12 MS); 1,1'-didodecyl-2,2'-dodecamethylenebispyridinium dimethanesulfonate (12-Py(2)-12-(2)Py-12 MS) were measured as a function of concentration and are here reported for the first time. They show a very peculiar behavior as a function of the spacer length, not allowing for the determination of a -CH 2- group contribution when this group is added to the spacer. The curve of the compound with a four-carbon-atom-long spacer lies between those of the compound with a spacer of 2 and 3 carbon atoms, instead of that below the latter, as expected. This surprising behavior, never found before in the literature and different from that found for the more popular m- s- m-type bisquaternary ammonium gemini surfactants, could be explained by a conformation change of the molecule, caused by stacking interactions between the two pyridinium rings, mediated by the counterion and appearing at an optimum length of the spacer. The hypothesis is also supported by the data obtained from the surface tension vs log c curves, showing that A min, the minimum area taken at the air-water interface by the molecule, is significantly lower for 12-Py(2)-4-(2)Py-12 MS than that of the other compounds of the same homologous series, and that the same compound has a greater tendency to form micelles instead of adsorbing at the air/water interface. The evaluation of the micellization enthalpies, by means of a pseudophase transition model, agrees with the exposed trends. These results confirm the great crop of information that can be derived from the study of the solution thermodynamics of aggregate systems and in particular from the curves of apparent and molar enthalpies vs concentration.

Thermodynamics and biological properties of the aqueous solutions of new glucocationic surfactants.

Thermodynamic properties of aqueous solutions of newly synthesized compounds, namely, N-[2-(beta-D-glucopyranosyl)ethyl]-N,N-dimethyl-N-alkylammonium bromides with hydrophobic tails of 12 (C12DGCB) and 16 (C16DGCB) carbon atoms, determined as a function of concentration by means of direct methods, are reported here. Dilution enthalpies, densities, and sound velocities were measured at 298 K, allowing for the determination of apparent and partial molar enthalpies, volumes, and compressibilities. Changes in thermodynamic quantities upon micellization were derived using a pseudophase-transition approach. From a comparison with the corresponding acetylated compounds N-[2-(2,3,4,6-tetra-O-acetyl-beta-D-glucopyranosyl)ethyl]-N,N-dimethyl-N-dodecylammonium bromide (C12AGCB) and N-[2-(2,3,4,6-tetra-O-acetyl-beta-D-glucopyanosyl)ethyl]-N,N-dimethyl-N-hexadecylammonium bromide (C16AGCB), the role played in the micellization process by the acetylated glycosyl moiety was inferred: it enhances the hydrophobic character of the molecule and lowers the change in enthalpy of micelle formation by about 1.5 kJ mol(-1). By comparing the volume of C12DGCB with those of DEDAB and DTAB, the volumes taken up by the (beta- d-glucopyranosyl)ethyl and beta- d-glucopyranosyl groups were found to be 133 and 99 cm3 mol(-1), respectively. Regarding the interaction with DPPC membranes, it seems that the sugar moiety of the hexadecyl deacetylated compound gives rise to hydrogen bonds with the oxygen atoms of the lipid phosphates, shifting the phase transition of DPPC from a bilayer gel to a bilayer liquid crystal to lower temperatures. C16AGCB induces significantly greater changes than C16DGCB in the structure of liposomes, suggesting the formation of domains. The interaction is strongly enhanced by the presence of water. Neither compound interacts strongly with DNA or compacts it, as shown by EMSA assays and AFM images. Only C16AGCB is able to deliver little DNA inside cells when coformulated with DOPE, as shown by the transient transfection assay. This might be related to the ability of C16AGCB to form surfactant-rich domains in the lipid structure.

Thermodynamics of aqueous solutions of dodecyldimethylethylammonium bromide.

The thermodynamic properties of the aqueous solutions of dodecyldimethylethylammonium bromide (DEDAB) were determined as a function of concentration by means of direct methods. Dilution enthalpies at 298 and 313 K, densities and sound velocities at 298 K were measured, allowing the determination of apparent and partial molar enthalpies, volumes, heat capacities and compressibilities. Changes in thermodynamic quantities upon micellization were derived using a pseudo-phase transition approach. These data allow for the determination of the effect of the -CH2- group, when added to the polar head of alkyltrimethylammonium bromides. The properties mainly affected by this addition are the enthalpies and, as a consequence, the entropies. The lowering of the charge density on the quaternary nitrogen due to the inductive effect of the ethyl group, greater than that of the methyl one, raises the plateau value of apparent and molar enthalpy by a quantity similar to that due to the removing of a methylene group from the hydrophobic chain. This effect does not play a great role in the value of the cmc (i.e. on the free energy of micelle formation), since the small decrease in cmc of DEDAB compared to DTAB reflects the increase in the overall hydrophobicity of the molecule. Volumes of DEDAB are greater than those of DTAB by about 15 cm3 mol(-1), both at infinite dilution and at micellar phase, a value in agreement with that generally accepted for a methylene group. The trends of apparent molar heat capacities and compressibilities vs m are the same as for DTAB: in fact, these quantities are related to the number of water molecules involved in the hydrophobic processes in solution, not very greatly affected by the substitution of a methyl group by an ethyl one on the polar head. In summary, this substitution affects to a significant extent the first derivatives of the free energy, but does not affect the second derivatives.

Molecular modeling of binding between amidinobenzisothiazoles, with antidegenerative activity on cartilage, and matrix metalloproteinase-3.

The aim of the work was to investigate the mechanism of binding between human metalloproteinase-3 (MMP-3) and new compounds belonging to the benzisothiazolylamidines class. In vitro tests suggest that these molecules, endowed with antinflammatory and cartilage antidegenerative activity, could act as ligands toward MMP-3. In lack of experimental structural informations, we performed molecular docking simulations to probe the interactions of benzisothiazolylamidines with matrix metalloproteinase-3, using the docking package GOLD and the software HINT as a post-process scoring function. Both GOLD and HINT predicted a binding mode for the compounds under analysis within the hydrophobic S1' pocket of MMP-3, without interaction with the catalytic Zn(2+) ion. The scores assigned by the programs to the interaction between the tested benzisothiazolylamidines and human MMP-3 were consistent with a potential direct enzyme inhibitory activity. The highest affinity was predicted for the N-(benzo[d]isothiazol-3-yl)-4-chlorobenzamidine (2), emerged as the most active derivative also in the in vitro tests.

From ligand to complexes: inhibition of human immunodeficiency virus type 1 integrase by beta-diketo acid metal complexes.

beta-Diketo acid-containing compounds are a promising class of human immunodeficiency virus type 1 (HIV-1) integrase (IN) inhibitors. Starting from the hypothesis that these inhibitors are able to coordinate ions in solution before interacting on the active site, a series of potentiometric measurements have been performed to understand the coordination ability of the diketo acid pharmacophore toward the biologically relevant Mg(2+). Moreover, by using beta-diketo acid/ester as model ligands with a set of divalent metal ions (Mg, Mn, Ni, Co, Cu, and Zn), we obtained a series of complexes and tested them for anti-HIV-1 IN activity. Results demonstrate that the diketo acid functionality chelates divalent metal ions in solution, and complexes with metals in different stoichiometric ratios are isolated. We postulate that the diketo acids act as complexes in their active form. In particular, they predominantly form species such as Mg(2)L(2+) and Mg(2)L(2) (derived from diketo acids, H(2)L), and MgL(+) and MgL(2) (derived from diketo esters, HL) at physiological pH. Furthermore, the synthesized mono- and dimetallic complexes inhibited IN at a high nanomolar to low micromolar range, with metal dependency in the phenyl diketo acid series. Retrospective analysis suggests that the electronic properties of the aromatic framework influence the metal-chelating ability of the diketo acid system. Therefore, the difference in activities is related to the complexes they preferentially form in solution, and these findings are important for the design of a new generation of IN inhibitors.

Synthesis and properties of new glucocationic surfactants: model structures for marking cationic surfactants with carbohydrates.

[reaction: see text] In this work, we report the synthesis of a new series of glucocationic surfactants, a class of surfactants we introduced very recently. The preparation of the surfactants is based on the synthesis of the 2-bromoethyl-2,3,4,6-tetra-O-acetyl-beta-D-glucopyranoside, whose preparation was studied in order to improve yields and stereoselectivity of this key intermediate. These glucocationic amphiphiles were prepared and studied as a model of cationic surfactants marked with a carbohydrate moiety. The use of carbohydrates as markers on cationic lipids was recently introduced to induce recognition by specific receptors, present on the surface of cell membranes. The chemicophysical characterization of these model structures can give more insight on the aggregation behavior. Conductivity and surface tension measurements were performed in order to characterize the compounds from the amphiphilic point of view. The results showed a different effect of the glucosidic moiety on the cmc value with respect to the glucopyridinium cationic surfactants. The surfactants also showed the tendency to form premicellar aggregates in solution when the hydrophobicity is raised.

Biologically active bisquaternary ammonium chlorides: physico-chemical properties of long chain amphiphiles and their evaluation as non-viral vectors for gene delivery.

The biological properties of bisquaternary ammonium salts, which are derivatives of N,N-bisdimethyl-1,2-ethanediamine (bis-C(n)BEC), of general formula /C(n)H(2n+1)OOCCH2(CH3)2N(+)CH2CH2N(+)(CH3)2CH2COOC(n)H(2n+1)/2Cl-, were investigated (n=10, 12, 14). The interaction with model membrane was studied by differential scanning calorimetry experiments, and the apparent adiabatic molar compressibility of their solution as a function of concentration was obtained by sound velocity measurements. Their biological activities were assayed by Electrophoresis Mobility Shift, MTT proliferation, and transient transfection. All the investigated compounds interact with the DNA and are able to transfect DNA, when they are co-formulated with DOPE, with an efficiency significantly greater than that of a standard commercial transfection reagent. Bis-C(14)BEC is the only molecule able to deliver DNA inside the cells without a helper lipid, as shown by EGFP expression, albeit with a low efficiency in comparison with a standard commercial transfection reagent. This may be due to a slightly different interaction of bis-C14BEC from bis-C10BEC and bis-C12BEC with phospholipid bilayers. Bis-C10BEC and bis-C12BEC show a slight fluidizing effect, while bis-C14BEC increases stability of both the gel and the rippled gel phases.

First evaluation of the thermodynamic properties for spheres to elongated micelles transition of some propanediyl-alpha,omega-bis(dimethylalkylammonium bromide) surfactants in aqueous solution.

The apparent and partial molar enthalpies, apparent molar volumes, and adiabatic compressibilities at 298 K of the aqueous solutions of the cationic gemini surfactants propanediyl-alpha,omega-bis(octyldimethylammonium bromide) (8-3-8) and propanediyl-alpha,omega-bis(dodecyldimethylammonium bromide) (12-3-12) have been measured as a function of concentration. The trends of the partial molar enthalpies versus concentration are the first well documented thermodynamic evidence of sphere to rod transition in the micellar phase, involving a detectable quantity of heat, and allow the determination of the change in enthalpy associated with this transition. The changes in enthalpies upon micellization and for the sphere to elongated micelles transition, DeltaH(s)(-->)(r), have been obtained from the experimental data by using a pseudo-phase transition approach: -1.5 kJ mol(-1) for 8-3-8 and -3.9 kJ mol(-1) for 12-3-12. No evidence of the above transition is found in the trends of volumetric properties versus m. The apparent adiabatic molar compressibilities for the compounds under investigation are also reported here for the first time: a negative group contribution for the methylene group is evaluated, when the surfactants are present in solution as a single molecule, reflecting its solvation structure. In the micellar phase, the -CH(2)- group contribution becomes positive. A value of 1.17 x 10(-3) cm(3) bar(-1) mol(-1) for the change in adiabatic molar compressibility upon micellization is obtained. The lower values of the methylene group contributions to the volumetric properties for the monomers support the hypothesis of partial association of the chains before the cmc.