RESUMEN
Spatially-encoded diffusion-ordered NMR spectroscopy (SPEN-DOSY) has emerged as a new time-efficient tool for the analysis of mixtures of small molecules in solution. Time efficiency is achieved using the concept of spatial parallelization of the effective gradient area, instead of the sequential incrementation used in conventional diffusion experiments. The data acquired with such sequences are then usually processed to extract diffusion coefficients, but cases when peak overlap in the 1H spectrum are difficult to address. Such limitation in conventional diffusion experiments is addressed via using the Pure Shift Yielded by CHirp Excitation (PSYCHE)-iDOSY sequence. Here we have adapted the PSYCHE-iDOSY sequence by using echo planar spectroscopic imaging (EPSI) to acquire SPEN-DOSY data. The pure shift mode of PSYCHE separates the overlapped components and a modified Stejskal-Tanner equation is used to extract the corresponding diffusion coefficient. The primary results obtained with the above-mentioned mixtures seem to open the possibility of separating complex mixtures in less time than PSYCHE-iDOSY.
RESUMEN
Hyperpolarized 13C NMR at natural abundance, based on dissolution dynamic nuclear polarization (d-DNP), provides rich, sensitive and repeatable 13C NMR fingerprints of complex mixtures. However, the sensitivity enhancement is associated with challenges such as peak overlap and the difficulty to assign hyperpolarized 13C signals. Ultrafast (UF) 2D NMR spectroscopy makes it possible to record heteronuclear 2D maps of d-DNP hyperpolarized samples. Heteronuclear UF 2D NMR can provide correlation peaks that link quaternary carbons and protons through long-range scalar couplings. Here, we report the analytical assessment of an optimized UF long-range HETCOR pulse sequence, applied to the detection of metabolic mixtures at natural abundance and hyperpolarized by d-DNP, based on repeatability and sensitivity considerations. We show that metabolite-dependent limits of quantification in the range of 1-50 mM (in the sample before dissolution) can be achieved, with a repeatability close to 10% and a very good linearity. We provide a detailed comparison of such analytical performance in two different dissolution solvents, D2O and MeOD. The reported pulse sequence appears as an useful analytical tool to facilitate the assignment and integration of metabolite signals in hyperpolarized complex mixtures.
RESUMEN
The application of NMR spectroscopy to complex mixture analysis and, in particular, to metabolomics is limited by the low sensitivity of NMR. We recently showed that dissolution dynamic nuclear polarization (d-DNP) could enhance the sensitivity of 13C NMR for complex metabolite mixtures, leading to the detection of highly sensitive 13C NMR fingerprints of complex samples such as plant extracts or urine. While such experiments provide heteronuclear spectra, which are complementary to conventional NMR, hyperpolarized 1H NMR spectra would also be highly useful, with improved limits of detection and compatibility with the existing metabolomics workflow and databases. In this technical note, we introduce an approach capable of recording both 1H and 13C hyperpolarized spectra of metabolite mixtures in a single experiment and on the same hyperpolarized sample. We investigate the analytical performance of this method in terms of sensitivity and repeatability, and then we show that it can be efficiently applied to a plant extract. Significant sensitivity enhancements in 1H NMR are reported with a repeatability suitable for metabolomics studies without compromising on the performance of hyperpolarized 13C NMR. This approach provides a way to perform both 1H and 13C hyperpolarized NMR metabolomics with unprecedented sensitivity and throughput.
Asunto(s)
Metabolómica , Espectroscopía de Resonancia Magnética/métodos , Metabolómica/métodosRESUMEN
The HYPNOESYS method (Hyperpolarized NOE System), which relies on the dissolution of optically polarized crystals, has recently emerged as a promising approach to enhance the sensitivity of NMR spectroscopy in the solution state. However, HYPNOESYS is a single-shot method that is not generally compatible with multidimensional NMR. Here we show that 2D NMR spectra can be obtained from HYPNOESYS-polarized samples, using single-scan acquisition methods. The approach is illustrated with a mixture of terpene molecules and a benchtop NMR spectrometer, paving the way to a sensitive, information-rich and affordable analytical method.
RESUMEN
Selective NMR experiments provide rapid access to important structural information, and are essential to tackle the analysis of large molecules and complex mixtures. Single-scan ultraselective experiments are particularly useful, as they can rapidly select signals that overlap with other signals. Here, we describe a novel type of single-scan ultraselective NMR experiments that is robust against the effects of translational molecular diffusion, and thus make it possible to improve significantly the sensitivity of the experiment. This will largely broaden the applicability of this powerful class of experiments.
RESUMEN
Flow NMR is a powerful tool to monitor chemical reactions under realistic conditions. Here, we describe ultrafast (UF) 2D NMR schemes that make it possible to acquire broadband homonuclear 2D NMR spectra in 90 seconds or less for a continuously flowing sample. An interleaved acquisition strategy is used to address the spectral width limitation of UF 2D NMR. We show how, for a flowing sample, the use of a transverse axis for spatial encoding makes it possible to achieve the very high scan-to-scan stability required for interleaved acquisition. We also describe an optimised solvent suppression strategy that is effective for interleaved acquisition in continuous flow. These developments open the way to online monitoring with flow 2D NMR at high time resolution, as we illustrate with the monitoring of an organocatalysed condensation reaction.
RESUMEN
Diffusion-ordered NMR spectroscopy (DOSY) is a powerful tool for the analysis of mixtures. Spatially-encoded (SPEN) DOSY makes it possible to collect a complete DOSY data set in a single scan, through spatial parallelisation of the gradient dimension. One limitation of current SPEN DOSY experiments is that the data is analysed assuming that the field gradient is uniform over the sample. This is usually not the case for high resolution NMR probes, and even less for triple-axis gradient probes. In this work, we have developed methods to account for gradient non-uniformity in the processing of SPEN DOSY experiment. We have first mapped the field gradient, using a stimulated echo (STE) NMR sequence with a weak readout gradient. We have then modified the calculation of the position-dependent effective gradient pulse area that is used in the analysis of SPEN DOSY data. The resulting model was validated through numerical simulations. A comparison of results obtained with and without inclusion of the effect of non-uniform gradients shows that the proposed approach increases the accuracy of SPEN DOSY experiments.
RESUMEN
Hyperpolarized nuclear magnetic resonance (NMR) offers an ensemble of methods that remarkably address the sensitivity issues of conventional NMR. Dissolution Dynamic Nuclear Polarization (d-DNP) provides a unique and general way to detect 13 Câ NMR signals with a sensitivity enhanced by several orders of magnitude. The expanding application scope of d-DNP now encompasses the analysis of complex mixtures at natural 13 C abundance. However, the application of d-DNP in this area has been limited to metabolite extracts. Here, we report the first d-DNP-enhanced 13 Câ NMR analysis of a biofluid -urine- at natural abundance, offering unprecedented resolution and sensitivity for this challenging type of sample. We also show that accurate quantitative information on multiple targeted metabolites can be retrieved through a standard addition procedure.
Asunto(s)
Solubilidad , Espectroscopía de Resonancia Magnética/métodosRESUMEN
Hyperpolarized NMR is a promising approach to address the sensitivity limits of conventional NMR metabolomics approaches, which currently fails to detect minute metabolite concentrations in biological samples. This review describes how tremendous signal enhancement offered by dissolution-dynamic nuclear polarization and parahydrogen-based techniques can be fully exploited for molecular omics sciences. Recent developments, including the combination of hyperpolarization techniques with fast multi-dimensional NMR implementation and quantitative workflows are described, and a comprehensive comparison of existing hyperpolarization techniques is proposed. High-throughput, sensitivity, resolution and other relevant challenges that should be tackled for a general application of hyperpolarized NMR in metabolomics are discussed.
Asunto(s)
Imagen por Resonancia Magnética , Metabolómica , Espectroscopía de Resonancia Magnética/métodos , Metabolómica/métodosRESUMEN
This work demonstrates the in-line monitoring of a flow photochemical reaction using 1D and ultrafast 2D NMR methods at high magnetic field. The reaction mixture exiting the flow reactor is flown through the NMR spectrometer and directly analyzed. In the case of simple substrates, suitable information can be obtained through 1D 1 H spectra, but for molecules of higher complexity the use of 2D experiments is key to address signal overlaps and assignment issues. Here we show the usefulness of ultrafast 2D COSY experiments acquired in 70â s or less, for the in-line monitoring of photochemical reactions, and the possibility to obtain reliable quantitative information. This is a powerful framework to, for example, efficiently screen reaction conditions.
RESUMEN
The measurement of translational diffusion coefficients by nuclear magnetic resonance (NMR) spectroscopy is essential in a broad range of fields, including organic, inorganic, polymer, and supramolecular chemistry. It is also a powerful method for mixture analysis. Spatially encoded diffusion NMR (SPEN DNMR)" is a time efficient technique to collect diffusion NMR data, which is particularly relevant for the analysis of samples that evolve in time. In many cases, motion other than diffusion is present in NMR samples. This is, for example, the case of flow NMR experiments, such as in online reaction monitoring and in the presence of sample convection. Such motion is deleterious for the accuracy of DNMR experiments in general and for SPEN DNMR in particular. Limited theoretical understanding of flow effects in SPEN DNMR experiments is an obstacle for their broader experimental implementation. Here, we present a detailed theoretical analysis of flow effects in SPEN DNMR and of their compensation, throughout the relevant pulse sequences. This analysis is validated by comparison with numerical simulation performed with the Fokker-Planck formalism. We then consider, through numerical simulation, the specific cases of constant, laminar, and convection flow and the accuracy of SPEN DNMR experiments in these contexts. This analysis will be useful for the design and implementation of fast diffusion NMR experiments and for their applications.
Asunto(s)
Imagen por Resonancia Magnética , Polímeros , Espectroscopía de Resonancia Magnética/métodos , Simulación por Computador , DifusiónRESUMEN
NMR spectroscopy is a powerful approach for the analysis of mixtures. Its usefulness arises in large part from the vast landscape of methods, and corresponding pulse sequences, that have been and are being designed to tackle the specific properties of mixtures of small molecules. This feature article describes a selection of methods that aim to address the complexity, the low concentrations, and the changing nature that mixtures can display. These notably include pure-shift and diffusion NMR methods, hyperpolarisation methods, and fast 2D NMR methods such as ultrafast 2D NMR and non-uniform sampling. Examples or applications are also described, in fields such as reaction monitoring and metabolomics, to illustrate the relevance and limitations of different methods.
Asunto(s)
Imagen por Resonancia Magnética , Metabolómica , Espectroscopía de Resonancia Magnética/métodos , Metabolómica/métodos , DifusiónRESUMEN
2D NMR is extensively used in many different fields, and its potential for the study of complex biochemical or chemical mixtures has been widely demonstrated. 2D NMR gives the ability to resolve peaks that overlap in 1D spectra, while providing both structural and quantitative information. However, complex mixtures are often analysed in situations where the data acquisition time is a crucial limitation, due to an ongoing chemical reaction or a moving sample from a hyphenated technique, or to the high-throughput requirement associated with large sample collections. Among the great diversity of available fast 2D methods, ultrafast (or single-scan) 2D NMR is probably the most general and versatile approach for complex mixture analysis. Indeed, ultrafast NMR has undergone an impressive number of methodological developments that have helped turn it into an efficient analytical tool, and numerous applications to the analysis of mixtures have been reported. This review first summarizes the main concepts, features and practical limitations of ultrafast 2D NMR, as well as the methodological developments that improved its analytical potential. Then, a detailed description of the main applications of ultrafast 2D NMR to mixture analysis is given. The two major application fields of ultrafast 2D NMR are first covered, i.e., reaction/process monitoring and metabolomics. Then, the potential of ultrafast 2D NMR for the analysis of hyperpolarized mixtures is described, as well as recent developments in oriented media. This review focuses on high-resolution liquid-state 2D experiments (including benchtop NMR) that include at least one spectroscopic dimension (i.e., 2D spectroscopy and DOSY) but does not cover in depth applications without spectral resolution and/or in inhomogeneous fields.
Asunto(s)
Mezclas Complejas , Imagen por Resonancia Magnética , Mezclas Complejas/análisis , Espectroscopía de Resonancia Magnética/métodos , Metabolómica , Manejo de EspecímenesRESUMEN
Online monitoring by flow NMR spectroscopy is a powerful approach to study chemical reactions and processes, which can provide mechanistic understanding, and drive optimisations. However, some of the most useful methods for mixture analysis and reaction monitoring are not directly applicable in flow conditions. This is the case of classic diffusion-ordered NMR spectroscopy (DOSY) methods, which can be used to separate the spectral information for mixture's components. We describe a fast and flow-compatible diffusion NMR experiment that makes it possible to collect accurate diffusion data for samples flowing at up to 3â mL/min. We use it to monitor the synthesis of a Schiff base with a flow-tube with a time resolution of approximately 2â minutes. The one-shot flow-compatible diffusion NMR described here open many avenues for reaction monitoring applications.
Asunto(s)
Bases de Schiff , Difusión , Espectroscopía de Resonancia Magnética/métodosRESUMEN
Diffusion NMR experiments rely on the measurement of signal attenuation as a function of the area of diffusion-encoding pulsed magnetic-field gradients. In conventional experiments, arbitrary series of gradient values can be used, and different gradient spacing strategies have different advantages. Ultrafast diffusion NMR relies on the spatial parallelisation of effective gradient area values to collect full 2D diffusion data sets in a single scan. Until recently, only linear spacing was available. We have shown that quadratic spacing can be achieved using a tailored frequency swept pulse. Here we describe the design of the pulse and validate it with numerical spin simulations, that make it possible to check the effect of the quadratic spacing pulse at different stages of the pulse sequence. We also show that quadratic spacing makes it possible to use a recently reported analysis method for diffusion NMR, the Matrix Pencil Method. We describe the results obtained with the MPM and those obtained with the direct exponential curve resolution algorithm (DECRA), which also requires quadratic gradient spacing. Overall, these developments open new opportunities for applications of spatially encoded diffusion experiments, such as ultrafast DOSY NMR and ultrafast Laplace NMR.
Asunto(s)
Algoritmos , Imagen por Resonancia Magnética , Difusión , Espectroscopía de Resonancia MagnéticaRESUMEN
NMR-based analysis of metabolite mixtures provides crucial information on biological systems but mostly relies on 1D 1H experiments for maximizing sensitivity. However, strong peak overlap of 1H spectra often is a limitation for the analysis of inherently complex biological mixtures. Dissolution dynamic nuclear polarization (d-DNP) improves NMR sensitivity by several orders of magnitude, which enables 13C NMR-based analysis of metabolites at natural abundance. We have recently demonstrated the successful introduction of d-DNP into a full untargeted metabolomics workflow applied to the study of plant metabolism. Here we describe the systematic optimization of d-DNP experimental settings for experiments at natural 13C abundance and show how the resolution, sensitivity, and ultimately the number of detectable signals improve as a result. We have systematically optimized the parameters involved (in a semi-automated prototype d-DNP system, from sample preparation to signal detection, aiming at providing an optimization guide for potential users of such a system, who may not be experts in instrumental development). The optimization procedure makes it possible to detect previously inaccessible protonated 13C signals of metabolites at natural abundance with at least 4 times improved line shape and a high repeatability compared to a previously reported d-DNP-enhanced untargeted metabolomic study. This extends the application scope of hyperpolarized 13C NMR at natural abundance and paves the way to a more general use of DNP-hyperpolarized NMR in metabolomics studies.
RESUMEN
Diffusion-ordered NMR spectroscopy (DOSY NMR) is a widely used method for the analysis of mixtures. It can be used to separate the spectra of a mixture's components and to analyse interactions. The classic implementation of DOSY experiments, based on an incrementation of the diffusion-encoding gradient area, requires several minutes or more to collect a 2D data set. Spatially-encoded (SPEN) DOSY makes it possible to collect a complete data set in less than 1 s, by spatial parallelisation of the effective gradient area. While several short descriptions of SPEN DOSY experiments have been reported, a thorough characterisation of its features and its practical use is missing, and this hinders the use of the method. Here, we present the unusual principles and implementation of the SPEN DOSY experiment, an understanding of which is useful to make optimal use of the method. The encoding and acquisition steps are described, and the parameter relations that govern the setup of SPEN DOSY experiments are discussed. The influence of key parameters, including on sensitivity, is illustrated experimentally on mixtures of small molecules. This study should be useful for the setup of SPEN DOSY experiments, which are particularly useful for systems that evolve in time.
RESUMEN
We show that TOCSY and multiple-quantum (MQ) 2D NMR spectra can be obtained for mixtures of substrates hyperpolarised by dissolution dynamic nuclear polarisation (D-DNP). This is achieved by combining optimised transfer settings for D-DNP, with ultrafast 2D NMR experiments based on spatiotemporal encoding. TOCSY and MQ experiments are particularly well suited for mixture analysis, and this approach opens the way to significant sensitivity gains for analytical applications of NMR, such as authentication and metabolomics.
RESUMEN
Measurements of singlet spin order decay rates are time consuming due to the long-lived nature of this form of order and the typical pseudo-2D mode of acquisition. Additionally, this acquisition modality is not ideal for experiments run on hyperpolarized order because of the single-shot nature of hyperpolarization techniques. We present a methodology based on spatial encoding that not only significantly reduces the duration of these experiments but also confers compatibility using spin hyperpolarization techniques. The method condenses in a single shot the variable delay array used to measure decay rates in conventional pseudo-2D relaxation experiments. This results in a substantial time saving factor and, more importantly, makes the experiment compatible with hyperpolarization techniques since only a single hyperpolarized sample is required. Furthermore, the presented method, besides offering savings on time and costs, avoids reproducibility concerns associated with repetition in the hyperpolarization procedure. The method accelerates the measurement and characterization of singlet order decay times, and, when coupled with hyperpolarization techniques, can facilitate the quest for systems with very long decay times.
RESUMEN
Ultrafast NMR based on spatial encoding yields arbitrary multidimensional spectra in a single scan. The dramatic acceleration afforded by spatial parallelisation makes it possible to capture transient species and processes, and has notably been applied to the monitoring of reactions and the analysis of hyperpolarised species. At the heart of ultrafast NMR lies the spatially sequential manipulation of nuclear spins. This is virtually always achieved by combining a swept radio-frequency pulse with a magnetic field gradient pulse. The dynamics of nuclear spins during these pulse sequence elements is key to understand and design ultrafast NMR experiments, and can often be described by surprisingly simple models. This article describes the spatial encoding of relaxation, chemical shift and diffusion in a common framework and discusses directions for future developments.