Monolithic Zirconia Single Crowns Supported by Narrow or Standard Diameter Titanium-zirconium Implants in Posterior Sites: One-year Results of a Randomized Controlled Trial.

The replacement of missing teeth with implant-supported prostheses has become a standard treatment option with reliable long-term outcomes in various clinical indications.1-6 The implant-supported single crowns, in particular, presented the most favorable outcome with a survival rate of 89.5% to 96% over a 10-year period.5,6 A notable prosthetic maintenance requirement, however, was reported irrespective of the prosthetic material used for the crown construction.1,7 Metal-ceramic restorations have been considered the gold standard when replacing single or multiple missing teeth with implant-supported fixed dental prostheses.8 A systematic review of 4363 metal-ceramic implant-supported single crowns in the anterior and posterior region reported an impressive survival rate of 98.3% over five years.9 Yet, the biologic and prosthetic complications associated with these restorations were substantial with a rate of 13.5%. In the posterior region, a recent systematic review of short-term randomized controlled trials10 reported a survival rate of 99.1% for metal-ceramic implant-supported single crowns. The reported prosthetic complications, mainly ceramic chipping, were also notable with an incidence rate of 7.6%.mIn recent years, the introduction of high-strength all-ceramic materials as well as digitaldesign and manufacturing processes, has allowed faster fabrication of more esthetic and cost effective restorations.11 Zirconia-based fixed dental prostheses on teeth and implants are now increasingly used and show 5-year cumulative survival rates of 89.4 to 100%.12 These restorations are typically made up of a zirconia framework that is veneered with a layer of glass ceramic to impart translucency for enhanced esthetics.13 However, chipping of the ceramic layer has been a lingering issue, shifting the attention toward the use of full anatomic monolithic zirconia restorations.14,15 Replacement of missing teeth with dental implants in posterior ridges with limited bone width can be surgically challenging and the notion of narrow diameter implants has been suggested.16,17 These implants were thought to offer potential advantages in terms of costeffectiveness and surgical morbidity.18,19 The literature, however, remains controversial on treatment outcomes with narrow diameter implants, particularly in posterior sites.19-21 When single tooth replacement with monolithic zirconia implant-supported single crowns in posterior sites are considered, only short to medium-term outcomes are available.22-26 The survival rates and clinical performances reported in these studies were variable. Crown survival rates between 84% and 100% were demonstrated over an observation time of one to three years, while the prosthetic complications were between 0% to 14%. In three studies,22,23,25 standard diameter titanium implants were used in premolar and molar sites to support the single crowns. The remaining two studies by Mühlemann et al. (2020) and Zumstein et al. (2023) reported the one-year and three-year outcomes, respectively, of the same cohort. In these studies, narrow titanium-zirconium (TiZr) implants of 3.3 mm diameter were exclusively utilized in molar sites. The implant and crown survival rates reported at one and three years were 97.4% and 84%, respectively. The lower survival rate observed in the report of Zumstein et al. (2023) resulted from fracture of five implants and the subsequent loss of their respective crowns. Aside from these two reports, no other information on the outcomes of monolithic zirconia single crowns supported by narrow diameter TiZr implants in posterior sites are available. The validity of this treatment, therefore, needs further investigation with well-designed clinical trials. Hence, a randomized controlled trial was undertaken to assess various implant, prosthetic, and patient-reported outcomes of monolithic zirconia single crowns supported by either narrow or standard diameter titanium-zirconium (TiZr) implants in posterior sites. The present report focuses on the one-year prosthetic results.

Quantity and Size of Titanium Particles Released from Different Mechanical Decontamination Procedures on Titanium Discs: An In Vitro Study.

Complications such as peri-implantitis could ultimately affect the survival of a dental implant. The prevention and treatment of peri-implant diseases require managing bacterial biofilm and controlling environmental risks, including the presence of pro-inflammatory titanium (Ti) particles in the peri-implant niche. Objectives included the evaluation of the size and quantity of Ti particles released from moderately roughened Ti surfaces during common mechanical surface decontamination methods. One hundred and forty moderately roughened Ti discs were divided into seven groups (n = 20 per group); six groups received mechanical decontamination procedures (ultrasonic scaling (US) with a metal tip and poly-ether-ketone (PEEK) under low and medium power settings, air-polishing with erythritol powder, and Ti brush), and the control group underwent air-water spray using a dental triplex. The rinsing solution was collected for Ti mass analysis using inductively coupled plasma mass spectrometry (ICPMS), as well as for Ti particle size and count analysis under scanning electron microscopy (SEM) with energy-dispersive spectroscopy (EDS). US metal tip instrumentation generated 34.00 ± 12.54 µg and 34.44 ± 6.08 µg of Ti under low and medium power settings, respectively. This amount of Ti generation was significantly higher than other instrumentation methods. The mean Ti particle size of the US groups ranged from 0.89 ± 0.27 µm to 1.25 ± 0.24 µm. No statistically significant difference was found in the particle size among US groups and Ti brush group (1.05 ± 0.11 µm), except for US with the PEEK tip, where a significantly smaller mean particle diameter was found at the low power setting (0.89 ± 0.27 µm). Mechanical instrumentation can produce Ti particulates and modify the implant surfaces. US using a metal tip generated the highest amount of Ti with smaller Ti size particles compared to all other commonly used mechanical surface instrumentations. The EDS analysis confirmed Ti in PEEK US tips. It can be suggested that deterioration from the PEEK US tip and Ti brush, as observed under SEM, is an additional source of Ti release during Ti surface decontamination.

In vivo healing of low temperature deproteinized bovine bone xenograft in a rabbit cranial model.

The physicochemical properties of grafting materials affect the quality of the osteointegration, resorption rate, and the new bone (NB) formation. This study assessed the physicochemical properties and integration of a low temperature deproteinized bovine bone xenograft (BBX), referred to as optimized MoaBone® (OMB). This novel BBX was physiochemically characterized both pre and post chemical bleaching and sterilization by gamma irradiation. OMB was compared to two commercial BBX; Bio-Oss® (BO) and MoaBone® (MB) using a rabbit cranial model. Residual graft and NB were quantified using histology and micro-computed tomography. Results showed that chemical treatment and gamma irradiation had limited effect on the surface texture. A significant decrease in the collagen content was detected post chemical treatment and in the carbonate content post gamma irradiation. There was no evidence of inflammatory infiltrate, necrosis, or connective tissue encapsulation, and a significant increase of NB in all grafted sites as compared to untreated defects could be observed. However, there was no statistically significant difference between the grafted sites. We conclude that chemical treatment and terminal sterilization strongly impact the final graft's properties. OMB graft showed equivalence with BO for in vivo bone formation and potentially results in lower levels of graft retention.

"I lost my first tooth here": Syrian former refugees' experiences of oral healthcare in Dunedin, New Zealand.

AIM: Oral health conditions are highly prevalent among former refugees; however, little is known about their experiences of accessing dental care. We aimed to explore Syrian former refugees' experiences of oral healthcare in New Zealand. METHOD: Thirty-nine Syrian former refugees resettled in Dunedin, New Zealand participated in nine focus group discussions. The interviews were audio-recorded, transcribed verbatim and thematically analysed. RESULTS: Almost all participants reported motivation to care for their teeth but multiple factors facilitated or hindered their ability to address their oral health needs, including financial factors, communication issues and dental care provider cultural safety. Most participants arrived with high expectations of New Zealand's health system. CONCLUSION: Oral healthcare providers and policymakers need to expect and accept their patients' past experiences and emotions, and consider their cultures, languages and backgrounds.

Bone remodelling marker expression in grafted and ungrafted sheep tooth extraction sockets: A comparative randomised study.

OBJECTIVE: To compare key markers of bone remodelling in a sheep tooth extraction model for sockets left to heal naturally or grafted with the bovine-derived xenograft Bio-Oss® covered with a collagen Bio-Gide® membrane. DESIGN: Right side premolar teeth were removed from thirty Romney-cross ewes. Standardised sockets in each sheep were randomly allocated treatments, a grafted test and an empty control. At 4-, 8- and 16-weeks sheep were euthanized and tissue collected (N = 10/group). RANK, RANKL and OPG immunohistochemical analysis was performed (n = 3). RANK, RANKL, OPG, COL1A1, TIMP3, SP7 and MSX2 mRNA expression levels were determined using RT2-qPCR assays (n = 3). RESULTS: Histologically, more new woven bone was observed in the test group at all time points. Strong RANK and RANKL expression was found in both groups; at all time points with stronger RANK staining in the test group at 8 and 16 weeks. Strong OPG staining was localized to both osteoblasts and connective tissues. RANK receptor mRNA was expressed at a lower level in the test group (-4.26-fold; p = 0.02) at 4 weeks and SP7 at 16 weeks (-2.89-fold; p = 0.04). COL1A1 and TIMP3 mRNA expression increased significantly over time in the control group (p = 0.045, F = 5.4 and p = 0.003, F = 42.2 respectively). CONCLUSION: Socket healing over time was comparable. The sheep tooth extraction model was found to be suitable for the evaluation of changes in the alveolar bone at the molecular level.

Comparison of Low and High Temperature Sintering for Processing of Bovine Bone as Block Grafts for Oral Use: A Biological and Mechanical In Vitro Study.

Large oral bone defects require grafting of bone blocks rather than granules to give physically robust, biocompatible and osteoconductive regeneration. Bovine bone is widely accepted as a source of clinically appropriate xenograft material. However, the manufacturing process often results in both reduced mechanical strength and biological compatibility. The aim of this study was to assess bovine bone blocks at different sintering temperatures and measure the effects on mechanical properties and biocompatibility. Bone blocks were divided into four groups; Group 1: Control (Untreated); Group 2: Initial boil for 6 h; Group 3: Boil 6 h followed by sintering at 550 °C for 6 h; Group 4: Boil 6 h followed by sintering at 1100 °C for 6 h. Samples were assessed for their purity, crystallinity, mechanical strength, surface morphology, chemical composition, biocompatibility and clinical handling properties. Statistical analysis was performed using one-way ANOVA and post-hoc Tukey's tests for normally distributed and Friedman test for abnormally distributed quantitative data from compression tests and PrestoBlue™ metabolic activity tests. The threshold for statistical significance was set at p < 0.05. The results showed that higher temperature sintering (Group 4) removed all organic material (0.02% organic components and 0.02% residual organic components remained) and increased crystallinity (95.33%) compared to Groups 1-3. All test groups (Group 2-4) showed decreased mechanical strength (MPa: 4.21 ± 1.97, 3.07 ± 1.21, 5.14 ± 1.86, respectively) compared with raw bone (Group 1) (MPa: 23.22 ± 5.24, p <0.05), with micro-cracks seen under SEM in Groups 3 and 4. Group 4 had the highest biocompatibility (p < 0.05) with osteoblasts as compared to Group 3 at all time points in vitro. Clinical handling tests indicated that Group 4 samples could better withstand drilling and screw placement but still demonstrated brittleness compared to Group 1. Hence, bovine bone blocks sintered at 1100 °C for 6 h resulted in highly pure bone with acceptable mechanical strength and clinical handling, suggesting it is a viable option as a block grafting material.

Three-Dimensional Evaluation of the Cytotoxicity and Antibacterial Properties of Alpha Lipoic Acid-Capped Silver Nanoparticle Constructs for Oral Applications.

There is a need to develop bifunctional scaffolds that provide antibacterial protection while encouraging host cell attachment/proliferation. This study evaluates HyStem®-C, and photo-cross-linked GelMA hydrogels for encapsulation and stabilisation of silver nanoparticles (AgNPs). We studied the behaviour of AgNPs and matrix interactions within both hydrogel systems. The cell viability of encapsulated human gingival fibroblasts (HGFs) was determined by Prestoblue® assay and live/dead staining. The release of AgNPs was monitored by inductively coupled plasma-mass spectroscopy. The antibacterial properties of the GelMA-AgNP constructs were determined using disc diffusion. Even distribution of AgNPs in GelMA induced a significant decrease in cell viability (p < 0.0001), whereas AgNP aggregates did not induce cytotoxicity in HyStem®-C. AgNPs doses ≥ 0.5 µg/mL in GelMA were significantly toxic to the HGFs (p < 0.0001). The release of AgNPs from GelMA after 48 h was 20% w/w for 0.1 µg/mL and 51% for 100 µg/mL of AgNPs. At ≥5 µg/mL, a significant intra-construct bactericidal effect was observed. The disc diffusion assay shows that GelMA-incorporated AgNPs were found to be effective against both Escherichia coli and Staphylococcus aureus at 50 and 100 µg/mL, respectively. Visible photo-cross-linked GelMA stably incorporated AgNPs to provide an antimicrobial regenerative construct for oral applications.

Expression of the pleiotrophin-midkine axis in a sheep tooth socket model of bone healing.

OBJECTIVE AND BACKGROUND: Resorption of alveolar bone after tooth extraction is a common problem often requiring bone grafting. The success of the grafting procedures is dependent on multiple factors including the presence of growth factors. This is the first in vivo study to investigate the role of the pleiotrophin family of cytokines in alveolar bone regeneration. This research investigated the role of the pleiotrophin-midkine (PTN-MDK) axis during osteogenesis, with and without a grafting material, after tooth extraction in a sheep model. METHODS: Thirty Romney-cross ewes were anesthetized, and all premolar teeth on the right side were extracted. The sockets were randomized to controls sites with no treatment and test sites with Bio-Oss® graft material and Bio-Gide® membrane. Samples were harvested after sacrificing animals 4, 8, and 16 weeks post-grafting (n = 10 per time-point). Tissue for qRT2 -PCR gene analysis was recovered from the socket next to the first molar using a trephine (Ø = 2 mm). Each socket was fixed, decalcified, paraffin-embedded, and sectioned. Immunohistochemistry was conducted to localize both PTN and MDK along with their receptors, protein tyrosine phosphatase receptor type Z1 (PTPRZ1), ALK receptor tyrosine kinase (ALK), and notch receptor 2 (NOTCH2). RESULTS: Within the healing sockets, high expression of genes for PTN, MDK, NOTCH2, and ALK was found at all time-points and in both grafted and non-grafted sites, while PTPRZ1 was only expressed at low levels. The relative gene expression of the PTN family of cytokines was not statistically different at the three time-points between test and control groups (p > .05). Immunohistochemistry found PTN and MDK in association with new bone, NOTCH2 in the connective tissue, and PTPRZ1 and ALK in association with cuboidal osteoblasts involved in bone formation. CONCLUSIONS: The PTN-MDK axis was highly expressed in both non-grafted and grafted sockets during osteogenesis in a sheep model of alveolar bone regeneration with no evidence that grafting significantly affected expression. The activation of NOTCH2 and PTPRZ1 receptors may be important during bone regeneration in vivo. The discovery of the PTN-MDK axis as important during alveolar bone regeneration is novel and opens up new avenues of research into these stably expressed highly active cytokines. Growth factor supplementation with PTN and/or MDK during healing may be an approach for enhanced regeneration or to initiate healing where delayed.

Dental high-speed handpiece and ultrasonic scaler aerosol generation levels and the effect of suction and air supply.

OBJECTIVE: Exposure to aerosol spray generated by high-speed handpieces (HSHs) and ultrasonic scalers poses a significant health risk to oral health practitioners from airborne pathogens. Aerosol generation varies with different HSH designs, but to date, no study has measured this. MATERIALS AND METHODS: We measured and compared aerosol generation by (1) dental HSHs with 3 different coolant port designs and (2) ultrasonic scalers with no suction, low-volume evacuation (LVE) or high-volume evacuation (HVE). Measurements used a particle counter placed near the operator's face in a single-chair, mechanically ventilated dental surgery. Volume concentrations of aerosol, totaled across a 0.3-25-µm size range, were compared for each test condition. RESULTS: HSH drilling and scaling produced significantly high aerosol levels (P < .001) with total volume concentrations 4.73×108µm3/m3 and 4.18×107µm3/m3, respectively. For scaling, mean volume of aerosol was highest with no suction followed by LVE and HVE (P < .001). We detected a negative correlation with both LVE and HVE, indicating that scaling with suction improved operator safety. For drilling, simulated cavity preparation with a 1-port HSH generated the most aerosol (P < .01), followed by a 4-port HSH. Independent of the number of cooling ports, lack of suction caused higher aerosol volume (1.98×107 µm3/m3) whereas HVE significantly reduced volume to -4.47×105 µm3/m3. CONCLUSIONS: High concentrations of dental aerosol found during HSH cavity preparation or ultrasonic scaling present a risk of infection, confirming the advice to use respiratory PPE. HVE and LVE both effectively reduced aerosol generation during scaling, whereas the new aerosol-reducing 'no air' function was highly effective and can be recommended for HSH drilling.

Evaluation of a tailored oral health promotion intervention for Syrian former refugees in New Zealand.

To investigate a health promotion strategy to improve oral health among former refugees in New Zealand. Former refugees were recruited (n = 63) and answered a questionnaire about their oral home care, smoking, sugar consumption and use of dental services. Participants then joined either focus group sessions to co-design oral health educational material (n = 39) or to be dentally examined for oral hygiene, periodontal health, gingivitis and dental caries and receive motivational instructions to improve their oral health habits (n = 20). Health messages using dual-language leaflets (covering oral home care, smoking, diet and access to services) were subsequently individually delivered monthly to all participants via a mobile phone application. After 6 months, follow-up questionnaires were sent to all participants and those who had been dentally examined were re-examined. Half of those who did not brush twice daily at baseline (54.1%) had increased brushing to at least twice daily by follow-up; 76.9% of those who consumed sugary drinks at least twice daily, reduced their sugar intake. No smokers quit smoking, however, 52.4% reported reducing the number of cigarettes or engaging in smoking cessation activities. Among those who had been dentally examined, plaque scores, gingivitis and periodontal pocketing all decreased significantly. Culturally and linguistically tailored oral health promotion interventions led to improved oral health behaviours for this group of former refugees over a 6 months follow-up period. We expect this to not only improve the oral health quality of life for this population, but also reduce the burden on the health system.

Refugees have high rates of oral health problems and face hardships in accessing available dental services. This project intended to promote better oral health knowledge and self-care in a group of Syrian refugees that are resettled in Dunedin, New Zealand. We recruited 63 Syrian former refugees who answered a questionnaire on their oral home care, smoking, sugar consumption and use of dental services. A group of 39 people took part in focus group meetings to help design oral health educational material in both the Arabic and English languages. The remaining 20 were dentally examined for periodontal health, dental caries, gingivitis and oral hygiene. All participants received individual monthly oral health messages taken from the leaflets designed with the focus group participants. After 6 months, the same people answered follow-up questionnaires and those who had been dentally examined were re-examined. Participants reported significantly more favourable oral health attitudes and behaviours at follow-up, and oral health among those who had been clinically examined was greatly improved. Oral health education resources tailored to the language and culture of former refugees may help to improve oral self-care and health.

Zirconia versus Titanium Implants: 8-Year Follow-Up in a Patient Cohort Contrasted with Histological Evidence from a Preclinical Animal Model.

Zirconia ceramic (ZC) implants are becoming more common, but comparisons between preclinical histology and long-term clinical trials are rare. This investigation comprised (1) 8-year clinical follow-up of one-piece ZC or titanium (Ti) implants supporting full overdentures and (2) histomorphometric analysis of the same implants in an animal model, comparing implants with various surface treatments. METHODS: (1) Clinical trial: 24 completely edentulous participants (2 groups of N = 12) received 7 implants (one-piece ball-abutment ZC or Ti; maxilla N = 4, mandible N = 3) restored with implant overdentures. Outcomes after 8-years included survival, peri-implant bone levels, soft-tissue responses, and prosthodontic issues. (2) Preclinical trial: 10 New Zealand sheep received 4 implants bilaterally in the femoral condyle: Southern Implants ZC or Ti one-piece implants, identical to the clinical trial, and controls: Southern ITC® two-piece implants with the same surface or Nobel (NBC) anodised (TiUnite™) surface. %Bone-implant contact (%BIC) was measured after 12 weeks of unloaded healing. RESULTS: 8 of 24 participants (33%) of an average age of 75 ± 8 years were recalled; 21% of original participants had died, and 46% could not be contacted. 80.4% of implants survived; excluding palatal sites, 87.5% of Ti and 79% of ZC implants survived. All failed implants were in the maxilla. Three ZC implants had fractured. Bone loss was similar for Ti vs. ZC; pocket depths (p = 0.04) and attachment levels (p = 0.02) were greater for Ti than ZC implants. (1.7 ± 1.6 mm vs. 1.6 ± 1.3 mm). All implants in sheep femurs survived. %BIC was not statistically different for one-piece blasted surface Ti (80 ± 19%) versus ZC (76 ± 20%) or ITC® (75 ± 16 mm); NBC had significantly higher %BIC than ITC (84 ± 17%, p = 0.4). CONCLUSION: Short-term preclinical results for ZC and Ti one-piece implants showed excellent bone-implant contact in unloaded femoral sites. This differed from the long-term clinical results in older-aged, edentulous participants. While ZC and Ti implants showed equivalent performance, the risks of peri-implantitis and implant loss in older, completely edentulous patients remain a significant factor.

The Effect of Low-Processing Temperature on the Physicochemical and Mechanical Properties of Bovine Hydroxyapatite Bone Substitutes.

Bovine bone grafts (BBX) require protein removal as part of the manufacturing process to reduce antigenicity and, in consequence, to be safely used in humans. Deproteinisation may have direct effects on the characteristics of the bone material and on in vivo material performance. This research aimed to comprehensively study the physicochemical and mechanical properties of BBX processed at low deproteinisation processing temperatures. Cubes of bovine bone (8 mm3) were treated with temperatures between 100 °C and 220 °C at 30 °C intervals and with pressures ranging from 1.01 to 24.58 Bar. The samples were characterised topographically and mechanically using scanning electron microscopy (SEM), atomic force microscopy (AFM), and uniaxial bending tests. The organic content and the chemical composition were determined using thermogravimetric analysis (TGA) and Fourier-transform infrared spectroscopy (FTIR). X-ray diffraction (XRD) and FTIR were also used to quantitatively determine the specimen crystallinity. Increasing temperature/pressure was associated with decreasing protein levels and compressive strength and increasing surface irregularities and crystallinity. The findings suggest that low-temperature processed bone is likely to exhibit a rapid in vivo degradation rate. The deproteinisation temperature can be adjusted to tailor the graft properties for specific applications.

The Effect of Low-Temperature Thermal Processing on Bovine Hydroxyapatite Bone Substitutes, toward Bone Cell Interaction and Differentiation.

Ideal bone grafting scaffolds are osteoinductive, osteoconductive, and encourage osteogenesis through the remodeling processes of bone resorption, new bone formation, and successful integration or replacement; however, achieving this trifecta remains challenging. Production methods of bone grafts, such as thermal processing, can have significant effects on the degree of cell-surface interactions via wide-scale changes in the material properties. Here, we investigated the effects of small incremental changes at low thermal processing temperatures on the degree of osteoclast and osteoblast attachment, proliferation, and differentiation. Bovine bone scaffolds were prepared at 100, 130, 160, 190, and 220 °C and compared with a commercial control, Bio-Oss®. Osteoclast attachment and activity were significantly higher on lower temperature processed bone and were not present ≥190 °C. The highest osteoblast proliferation and differentiation were obtained from treatments at 130 and 160 °C. Similarly, qRT2-PCR assays highlighted osteoblasts attached to bone processed at 130 and 160 °C as demonstrating the highest osteogenic gene expression. This study demonstrated the significant effects of small-scale processing changes on bone graft materials in vitro, which may translate to a tailored approach of cellular response in vivo.

A disaster victim identification workshop focused on forensic odontology using embalmed human remains.

A high number of victims of mass casualty incidences are identified through their teeth. While forensic odontologists need to have a complex skillset during a disaster victim identification (DVI) response, hands-on training opportunities are rare. In countries with very limited forensic casework, such as New Zealand, many forensic odontologists find it difficult to achieve the number of annual forensic dental identifications required to maintain their credentialling. This report details the development of a hands-on forensic odontology-focused DVI workshop using human Crosado-embalmed remains. Anonymous participant evaluations, including five-point Likert and open-ended items, were performed in both years the workshop was held. A total of 10 and 17 participants, predominantly dentists, attended the workshop in 2020 and 2021, respectively. Participant feedback was extremely positive. Likert items were statistically similar between participants in both years. Open-ended items revealed positive feedback regarding the use of cadaveric remains, the gained hands-on experience, or the teamwork aspect. Participants who attended the workshop in both years commented on the positive aspect of repetition to cement their skills. As areas of improvement, participants named (for example) time management and the number of portable X-ray devices, leading to changes that were implemented in 2021. Moreover, the participants expressed interest to further their skills on decomposed, burnt, and fragmented human remains, which for ethical reasons has yet to be implemented. The DVI workshop described here, using embalmed human remains, provides an opportunity to add dental identifications toward annual credentialling requirements for forensic odontologists. Participants rated the course to be excellent overall and highly relevant for their role. For future workshops, there is an interest to include further aspects of the DVI response such as fingerprinting or police work as well as remains, which are altered due to natural or physical reasons.

Meeting the challenges and clinical requirements for dental regeneration; the New Zealand experience.

Disease and trauma leading to tooth loss and destruction of supporting bone is a significant oral handicap, which may be addressed through surgical therapies that aim to regenerate the lost tissue. Whilst complete regeneration of teeth is still aspirational, regeneration of supporting structures (dental pulp, cementum, periodontal ligament, bone) is becoming commonplace, both for teeth and for titanium dental implants that are used to replace teeth. Most grafting materials are essentially passive, however the next generation of oral regenerative devices will combine non-antibiotic antimicrobials and/or osteogenic or inductive factors and/or appropriate multipotential stem cells. The review gives an overview of the approaches taken, including fabrication of novel scaffolds, incorporation of growth factors and cell-based therapies, and discusses the preclinical animal models we employ in the development pathway.

Is titanium-zirconium alloy a better alternative to pure titanium for oral implant? Composition, mechanical properties, and microstructure analysis.

INTRODUCTION: Titanium (Ti) is widely accepted as a biomaterial for orthopaedic and dental implants, primarily due to its capacity to integrate directly into the bone and its superior corrosion resistance. It has been suggested that titanium-zirconium alloy (TiZr), with 13-17% of zirconium, has better mechanical properties than pure Ti, but there are very few published studies assessing the suitability of TiZr for high-load- bearing implants. This study aimed to compare the mechanical properties and microstructures of TiZr and commercially pure titanium (Ti). METHODOLOGY: Pure Ti and TiZr alloy discs were prepared and subjected to characterisation by nanoindentation, electron dispersive spectroscopy (EDS), X-ray diffraction (XRD), and electron backscatter diffraction (EBSD). RESULTS: The TiZr alloy was found to have significantly lower elastic modulus value (p < 0.0001) and greater hardness than Ti (p < 0.05). The EDS results confirmed the presence of Zr (13-17%) in the TiZr alloy, with XRD and EBSD images showing microstructure with the alpha phase similar to commercially available Ti. CONCLUSION: The lower elastic modulus, higher hardness, presence of alpha phase, and the finer grain size of the TiZr alloy make it more suitable for high-load-bearing implants compared to commercially available Ti and is likely to encourage a positive biological response.

HGF/MET in osteogenic differentiation of primary human palatal periosteum-derived mesenchymal stem cells.

PURPOSE: This study aimed to determine expressions of hepatocyte growth factor (HGF) and MET proto-oncogene receptor tyrosine kinase (MET) in palatal periosteum (PP) and to examine the effect of HGF/MET on osteogenic differentiation of human palatal periosteum-derived mesenchymal stem cells (PD-MSCs). METHODS: HGF/MET proteins in human palatal periosteum (n = 3) were localized using immunohistochemistry. PD-MSCs (n = 3) were cultured in serum-free Essential 8 (E8) medium or osteogenic medium with and without Capmatinib, a selective ATP-inhibitor of MET. HGF concentration in vitro was measured with ELISA. Relative gene expression was quantified from PD-MSCs by quantitative reverse transcription real-time polymerase chain reaction. RESULTS: Immunohistochemistry detected co-localization of HGF and MET protein in PP. HGF protein levels were significantly higher (P < 0.05) in osteogenic media (day 21: 12.19 ± 8.36 ng/mL) than in E8 medium (day 21: 0.42 ± 0.72 ng/mL). MET inhibitor had a limited feedback effect on the expression profile of the osteogenic genes tested. Gene expression levels for all but three genes were comparable in serum-free and osteogenic media at all time points. CONCLUSION: HGF/MET present in human PP and HGF is upregulated in vitro during osteogenesis; however the targeted pathways controlled by MET may not involve osteoblast maturation.

Formulation of a Semisolid Emulsion Containing Leptospermum scoparium Essential Oil and Evaluation of In Vitro Antimicrobial and Antibiofilm Efficacy.

Manuka oil, an essential oil derived from the Leptospermum scoparium, has been traditionally used for wound care and as a topical antibacterial, antifungal, and anti-inflammatory. However, the essential oil is not well retained at mucosal sites, such as the oral cavity, where the benefits of the aforementioned properties could be utilized toward the treatment of persistent biofilms. Within this study, L. scoparium essential oil was incorporated into a semisolid emulsion for improved delivery. The safety profile of L. scoparium essential oil on human gingival fibroblasts was determined via cell viability, cytotoxicity, and caspase activation. The minimal bactericidal concentration of L. scoparium essential oil was determined, and the emulsion's antibiofilm effects visualized using confocal laser scanning microscopy. L. scoparium essential oil demonstrated a lower IC50 (0.02% at 48 h) when compared to the clinical control chlorhexidine (0.002% at 48 h) and displayed lower cumulative cytotoxicity. Higher concentrations of L. scoparium essential oil (≥ 0.1%) at 6 h resulted in higher caspase 3/7 activation, suggesting an apoptotic pathway of cell death. A minimal bactericidal concentration of 0.1% w/w was observed for 6 oral bacteria and 0.01% w/v for Porphyromonas gingivalis. Textural and rheometric analysis indicated increased stability of emulsion with a 1 : 3 ratio of L. scoparium essential oil: Oryza sativa carrier oil. The optimized 5% w/w L. scoparium essential oil emulsion showed increased bactericidal penetrative effects on Streptococci gordonii biofilms compared to oil alone and to chlorhexidine controls. This study has demonstrated the safety, formulation, and antimicrobial activity of L. scoparium essential oil emulsion for potential antibacterial applications at mucosal sites.

Ultrastructure and properties of primary carious molars treated using the Hall Technique.

BACKGROUND: The Hall Technique (HT) is a method of restoring decayed primary teeth using stainless steel crowns (SSCs) without tooth preparation, caries removal, or local anaesthetic. AIM: To investigate the ultrastructural, biomechanical, and chemical characteristics of teeth managed with the Hall Technique in comparison with conventional SSC (controls). DESIGN: Twelve HT-treated primary molars and four controls were analysed. Teeth were dehydrated in ethanol, embedded in methylmethacrylate, mesio-distally sectioned, X-rayed, mounted, and polished. Biomechanical, ultrastructural, and chemical characterisation was performed for carious lesion and sound areas of each specimen. RESULTS: Pre-treatment and post-treatment X-rays showed evidence of little to no caries progression over time. In carious lesions, mean hardness and elastic modulus values were lower in HT-treated teeth than in controls. In both controls and HT-treated teeth, carious lesions had the lowest %wt of Ca and P of all tissues sampled. CONCLUSIONS: Although the retained carious tissue was biomechanically more compromised in HT-treated teeth, the Ca and P values were higher than reported elsewhere for carious lesions in primary molars, suggesting remineralisation may have occurred in caries in HT-treated teeth. Future investigations will help elucidate the processes involved with carious lesion arrest under SSC.