Reliable, standardized measurements for cell mechanical properties.

Atomic force microscopy (AFM) has become indispensable for studying biological and medical samples. More than two decades of experiments have revealed that cancer cells are softer than healthy cells (for measured cells cultured on stiff substrates). The softness or, more precisely, the larger deformability of cancer cells, primarily independent of cancer types, could be used as a sensitive marker of pathological changes. The wide application of biomechanics in clinics would require designing instruments with specific calibration, data collection, and analysis procedures. For these reasons, such development is, at present, still very limited, hampering the clinical exploitation of mechanical measurements. Here, we propose a standardized operational protocol (SOP), developed within the EU ITN network Phys2BioMed, which allows the detection of the biomechanical properties of living cancer cells regardless of the nanoindentation instruments used (AFMs and other indenters) and the laboratory involved in the research. We standardized the cell cultures, AFM calibration, measurements, and data analysis. This effort resulted in a step-by-step SOP for cell cultures, instrument calibration, measurements, and data analysis, leading to the concordance of the results (Young's modulus) measured among the six EU laboratories involved. Our results highlight the importance of the SOP in obtaining a reproducible mechanical characterization of cancer cells and paving the way toward exploiting biomechanics for diagnostic purposes in clinics.

Solid-state NMR molecular snapshots of Aspergillus fumigatus cell wall architecture during a conidial morphotype transition.

While establishing an invasive infection, the dormant conidia of Aspergillus fumigatus transit through swollen and germinating stages, to form hyphae. During this morphotype transition, the conidial cell wall undergoes dynamic remodeling, which poses challenges to the host immune system and antifungal drugs. However, such cell wall reorganization during conidial germination has not been studied so far. Here, we explored the molecular rearrangement of Aspergillus fumigatus cell wall polysaccharides during different stages of germination. We took advantage of magic-angle spinning NMR to investigate the cell wall polysaccharides, without employing any destructive method for sample preparation. The breaking of dormancy was associated with a significant change in the molar ratio between the major polysaccharides ß-1,3-glucan and α-1,3-glucan, while chitin remained equally abundant. The use of various polarization transfers allowed the detection of rigid and mobile polysaccharides; the appearance of mobile galactosaminogalactan was a molecular hallmark of germinating conidia. We also report for the first time highly abundant triglyceride lipids in the mobile matrix of conidial cell walls. Water to polysaccharides polarization transfers revealed an increased surface exposure of glucans during germination, while chitin remained embedded deeper in the cell wall, suggesting a molecular compensation mechanism to keep the cell wall rigidity. We complement the NMR analysis with confocal and atomic force microscopies to explore the role of melanin and RodA hydrophobin on the dormant conidial surface. Exemplified here using Aspergillus fumigatus as a model, our approach provides a powerful tool to decipher the molecular remodeling of fungal cell walls during their morphotype switching.

Deciphering pathological remodelling of the human cartilage extracellular matrix in osteoarthritis at the supramolecular level.

The extracellular matrix (ECM) of articular cartilage is a three-dimensional network mainly constituted of entangled collagen fibrils and interfibrillar aggrecan aggregates. During the development of osteoarthritis (OA), the most common musculoskeletal disorder, the ECM is subjected to a combination of chemical and structural changes that play a pivotal role in the initiation and the progress of the disease. While the molecular mechanisms involved in the pathological remodelling of the ECM are considered as decisive, they remain, however, not completely elucidated. Herein, we report a relevant way for unravelling the role and nature of OA progress on human cartilage tissues, in terms of chemical composition and morphological and mechanical properties at the level of supramolecular assemblies constituting the cartilage ECM. For this purpose, we used X-ray photoelectron spectroscopy (XPS), and developed an innovative methodological approach that provides the molecular composition of the ECM. Moreover, we used atomic force microscopy (AFM) to probe the tissues at the level of individual collagen fibrils, both imaging and force spectroscopy modes being explored to this end. Taken together, these nanoscale characterization studies reveal the existence of two stages in the OA progress. At the early stage, a marked increase in the aggrecan and collagen content is observed, reflecting the homeostatic chondrocyte activity that tends to repair the cartilage ECM. At the late stage, we observe a failed attempt to stabilize and/or restore the tissue, yielding significant degradation of the supramolecular assemblies. This suggests an imbalance in the chondrocyte activity that turns in favor of catabolic events. Chemical changes are also accompanied by ECM structural changes and stiffening. Interestingly, we showed the possibility to mimic the imbalanced activities of chondrocytes by applying enzymatic digestions of healthy cartilage, through the combined action of hyaluronidase and collagenase. This yields damage strictly analogous to that observed at high OA severity. These findings bring mechanistic insights leading to a better understanding of the mechanism by which OA is initiated and progresses in the cartilage ECM. They offer guidelines for the development of curative treatments, such as targeting the homeostatic balance of chondrocyte metabolism through the control of enzymatic reactions involved in catabolic processes.

Impact of Collagen Crosslinking on Dislocated Human Shoulder Capsules-Effect on Structural and Mechanical Properties.

Classical treatments of shoulder instability are associated with recurrence. To determine whether the modification of the capsule properties may be an alternative procedure, the effect of crosslinking treatment on the structure and mechanical properties of diseased human shoulder capsules was investigated. Joint capsules harvested from patients during shoulder surgery (n = 5) were treated or not with UV and/or riboflavin (0.1%, 1.0% and 2.5%). The structure and the mechanical properties of the capsules were determined by atomic force microscopy. The effect of treatments on cell death was investigated. Collagen fibrils were well-aligned and adjacent to each other with a D-periodicity of 66.9 ± 3.2 nm and a diameter of 71.8 ± 15.4 nm in control untreated capsules. No effect of treatments was observed on the organization of the collagen fibrils nor on their intrinsic characteristics, including D-periodicity or their mean diameter. The treatments also did not induce cell death. In contrast, UV + 2.5% riboflavin induced capsule stiffness, as revealed by the increased Young's modulus values (p < 0.0001 for each patient). Our results showed that the crosslinking procedure changed the biomechanics of diseased capsules, while keeping their structural organisation unchanged at the single fibril level. The UV/riboflavin crosslinking procedure may be a promising way to preserve the functions of collagen-based tissues and tune their elasticity for clinically relevant treatments.

Hierarchical Collagen-Hydroxyapatite Nanostructures Designed through Layer-by-Layer Assembly of Crystal-Decorated Fibrils.

A comprehensive understanding of the mechanism by which type I collagen (Col) interacts with hydroxyapatite nanoparticles (Hap NPs) in aqueous solutions is a pivotal step for guiding the design of biologically relevant nanocomposites with controlled hierarchical structure. In this paper we use a variety of Hap NPs differing by their shape (rod vs platelet) and their size (∼30 vs ∼130 nm) and investigate their mechanism(s) of interaction with collagen. The addition of collagen to the Hap suspensions induces different effects that strongly depend on the nanoparticle type. Interestingly, the use of small rods, typically with ∼30 nm of length (R30), leads to the formation of assembled collagen fibrils decorated with Hap nanocrystals which, in turn, self-assemble progressively to form larger fibrillar Hap-Col composite. The crystals decorating collagen provide "intrinsic" negative charges to the fibrillar objects that allow their incorporation in three-dimensional structure using layer-by-layer (LbL) assembly. This offers a straightforward way to construct a collagen-based hybrid material with well-defined hierarchy under near-physiological conditions. In situ, QCM-D monitoring revealed the buildup of soft and highly hydrated hybrid (PAH/R30-Col)n multilayers for which the mechanism of growth was very different from that observed for polyelectrolytes and nanoparticles without collagen (PAH/R30). The LbL assembly of crystal-decorated collagen yields a hierarchical nanostructured film whose thickness and roughness can be modulated by the addition of salt and incorporate fibrillar objects of about 400 nm in width and few micrometers in length, as probed by AFM. The approach described in this work provides a relevant way to better control the (supra)molecular assembly of Col and Hap NPs with the perspective of developing hierarchical Hap-Col nanocomposites with tuned properties for various biomedical applications.

Development of a novel multiphysical approach for the characterization of mechanical properties of musculotendinous tissues.

At present, there is a lack of well-validated protocols that allow for the analysis of the mechanical properties of muscle and tendon tissues. Further, there are no reports regarding characterization of mouse skeletal muscle and tendon mechanical properties in vivo using elastography thereby limiting the ability to monitor changes in these tissues during disease progression or response to therapy. Therefore, we sought to develop novel protocols for the characterization of mechanical properties in musculotendinous tissues using atomic force microscopy (AFM) and ultrasound elastography. Given that TIEG1 knockout (KO) mice exhibit well characterized defects in the mechanical properties of skeletal muscle and tendon tissue, we have chosen to use this model system in the present study. Using TIEG1 knockout and wild-type mice, we have devised an AFM protocol that does not rely on the use of glue or chemical agents for muscle and tendon fiber immobilization during acquisition of transversal cartographies of elasticity and topography. Additionally, since AFM cannot be employed on live animals, we have also developed an ultrasound elastography protocol using a new linear transducer, SLH20-6 (resolution: 38 µm, footprint: 2.38 cm), to characterize the musculotendinous system in vivo. This protocol allows for the identification of changes in muscle and tendon elasticities. Such innovative technological approaches have no equivalent to date, promise to accelerate our understanding of musculotendinous mechanical properties and have numerous research and clinical applications.

Automated multi-sample acquisition and analysis using atomic force microscopy for biomedical applications.

In the last 20 years, atomic force microscopy (AFM) has emerged as a ubiquitous technique in biological research, allowing the analysis of biological samples under near-physiological conditions from single molecules to living cells. Despite its growing use, the low process throughput remains a major drawback. Here, we propose a solution validated on a device allowing a fully automated, multi-sample analysis. Our approach is mainly designed to study samples in fluid and biological cells. As a proof of concept, we demonstrate its feasibility applied to detect and scan both fixed and living bacteria before completion of data processing. The effect of two distinct treatments (i.e. gentamicin and heating) is then evidenced on physical parameters of fixed Yersinia pseudotuberculosis bacteria. The multi-sample analysis presented allows an increase in the number of scanned samples while limiting the user's input. Importantly, cantilever cleaning and control steps are performed regularly-as part of the automated process-to ensure consistent scanning quality. We discuss how such an approach is paving the way to AFM developments in medical and clinical fields, in which statistical significance of results is a prerequisite.

The puzzling construction of the conidial outer layer of Aspergillus fumigatus.

If the mycelium of Aspergillus fumigatus is very short-lived in the laboratory, conidia can survive for years. This survival capacity and extreme resistance to environmental insults is a major biological characteristic of this fungal species. Moreover, conidia, which easily reach the host alveola, are the infective propagules. Earlier studies have shown the role of some molecules of the outer conidial layer in protecting the fungus against the host defense. The outer layer of the conidial cell wall, directly in contact with the host cells, consists of α-(1,3)-glucan, melanin, and proteinaceous rodlets. This study is focused on the global importance of this outer layer. Single and multiple mutants without one to three major components of the outer layer were constructed and studied. The results showed that the absence of the target molecules resulting from multiple gene deletions led to unexpected phenotypes without any logical additivity. Unexpected compensatory cell wall surface modifications were indeed observed, such as the synthesis of the mycelial virulence factor galactosaminogalactan, the increase in chitin and glycoprotein concentration or particular changes in permeability. However, sensitivity of the multiple mutants to killing by phagocytic host cells confirmed the major importance of melanin in protecting conidia.

Rv0613c/MSMEG_1285 Interacts with HBHA and Mediates Its Proper Cell-Surface Exposure in Mycobacteria.

Heparin-binding haemagglutinin (HBHA) is a surface-exposed virulence factor of Mycobacterium tuberculosis and is involved in the binding of mycobacteria to non-phagocytic cells, allowing for extra-pulmonary dissemination of the bacilli. Despite its surface exposure, HBHA is not produced as a pre-protein containing a typical cleavable N-terminal signal peptide and is thus likely secreted by a Sec-independent, as of yet unknown mechanism. Here, we used the bacterial adenylate cyclase two-hybrid system to identify the proteins encoded by rv0613c and mmpL14 as being able to interact with HBHA. Our study was focused on Rv0613c, as it showed more consistent interactions with HBHA than MmpL14. Deletion of its orthologous gene MSMEG_1285 in recombinant Mycobacterium smegmatis producing HBHA from M. tuberculosis resulted in the loss of proper surface exposure of HBHA, as evidenced by atomic force microscopy. Furthermore, the lack of MSMEG_1285 also abolished the clumping phenotype and rough colony morphology of the recombinant M. smegmatis and reduced its adherence to A549 epithelial cells. These phenotypes have previously been associated with surface-exposed HBHA. Thus, MSMEG_1285 is directly involved in the proper cell-surface exposure of HBHA. These observations identify MSMEG_1285/Rv0613c as the first accessory protein involved in the cell surface exposure of HBHA.

Role of Hydrophobins in Aspergillus fumigatus.

Resistance of Aspergillus fumigatus conidia to desiccation and their capacity to reach the alveoli are partly due to the presence of a hydrophobic layer composed of a protein from the hydrophobin family, called RodA, which covers the conidial surface. In A. fumigatus there are seven hydrophobins (RodA-RodG) belonging to class I and III. Most of them have never been studied. We constructed single and multiple hydrophobin-deletion mutants until the generation of a hydrophobin-free mutant. The phenotype, immunogenicity, and virulence of the mutants were studied. RODA is the most expressed hydrophobin in sporulating cultures, whereas RODB is upregulated in biofilm conditions and in vivo Only RodA, however, is responsible for rodlet formation, sporulation, conidial hydrophobicity, resistance to physical insult or anionic dyes, and immunological inertia of the conidia. None of the hydrophobin plays a role in biofilm formation or its hydrophobicity. RodA is the only needed hydrophobin in A. fumigatus, conditioning the structure, permeability, hydrophobicity, and immune-inertia of the cell wall surface in conidia. Moreover, the defect of rodlets on the conidial cell wall surface impacts on the drug sensitivity of the fungus.

Surface proteome analysis of a natural isolate of Lactococcus lactis reveals the presence of pili able to bind human intestinal epithelial cells.

Surface proteins of Gram-positive bacteria play crucial roles in bacterial adhesion to host tissues. Regarding commensal or probiotic bacteria, adhesion to intestinal mucosa may promote their persistence in the gastro-intestinal tract and their beneficial effects to the host. In this study, seven Lactococcus lactis strains exhibiting variable surface physico-chemical properties were compared for their adhesion to Caco-2 intestinal epithelial cells. In this test, only one vegetal isolate TIL448 expressed a high-adhesion phenotype. A nonadhesive derivative was obtained by plasmid curing from TIL448, indicating that the adhesion determinants were plasmid-encoded. Surface-exposed proteins in TIL448 were analyzed by a proteomic approach consisting in shaving of the bacterial surface with trypsin and analysis of the released peptides by LC-MS/MS. As the TIL448 complete genome sequence was not available, the tryptic peptides were identified by a mass matching approach against a database including all Lactococcus protein sequences and the sequences deduced from partial DNA sequences of the TIL448 plasmids. Two surface proteins, encoded by plasmids in TIL448, were identified as candidate adhesins, the first one displaying pilin characteristics and the second one containing two mucus-binding domains. Inactivation of the pilin gene abolished adhesion to Caco-2 cells whereas inactivation of the mucus-binding protein gene had no effect on adhesion. The pilin gene is located inside a cluster of four genes encoding two other pilin-like proteins and one class-C sortase. Synthesis of pili was confirmed by immunoblotting detection of high molecular weight forms of pilins associated to the cell wall as well as by electron and atomic force microscopy observations. As a conclusion, surface proteome analysis allowed us to detect pilins at the surface of L. lactis TIL448. Moreover we showed that pili appendages are formed and involved in adhesion to Caco-2 intestinal epithelial cells.

Adhesion and nanomechanics of pili from the probiotic Lactobacillus rhamnosus GG.

Knowledge of the mechanisms by which bacterial pili adhere to host cells and withstand external forces is critical to our understanding of their functional roles and offers exciting avenues in biomedicine for controlling the adhesion of bacterial pathogens and probiotics. While much progress has been made in the nanoscale characterization of pili from Gram-negative bacteria, the adhesive and mechanical properties of Gram-positive bacterial pili remain largely unknown. Here, we use single-molecule atomic force microscopy to unravel the binding mechanism of pili from the probiotic Gram-positive bacterium Lactobacillus rhamnosus GG (LGG). First, we show that SpaC, the key adhesion protein of the LGG pilus, is a multifunctional adhesin with broad specificity. SpaC forms homophilic trans-interactions engaged in bacterial aggregation and specifically binds mucin and collagen, two major extracellular components of host epithelial layers. Homophilic and heterophilic interactions display similar binding strengths and dissociation rates. Next, pulling experiments on living bacteria demonstrate that LGG pili exhibit two unique mechanical responses, that is, zipper-like adhesion involving multiple SpaC molecules distributed along the pilus length and nanospring properties enabling pili to resist high force. These mechanical properties may represent a generic mechanism among Gram-positive bacterial pili for strengthening adhesion and withstanding shear stresses in the natural environment. The single-molecule experiments presented here may help us to design molecules capable of promoting or inhibiting bacterial-host interactions.

High-resolution imaging of chemical and biological sites on living cells using peak force tapping atomic force microscopy.

Currently, there is a growing need for methods that can quantify and map the molecular interactions of biological samples, both with high-force sensitivity and high spatial resolution. Force-volume imaging is a valuable atomic force microscopy (AFM) modality for probing specific sites on biosurfaces. However, the low speed and poor spatial resolution of this method have severely hampered its widespread use in life science research. We use a novel AFM mode (i.e., peak force tapping with chemically functionalized tips) to probe the localization and interactions of chemical and biological sites on living cells at high speed and high resolution (8 min for 1 µm × 1 µm images at 512 pixels × 512 pixels). First, we demonstrate the ability of the method to quantify and image hydrophobic forces on organic surfaces and on microbial pathogens. Next, we detect single sensor proteins on yeast cells, and we unravel their mechanical properties in relation to cellular function. Owing to its key capabilities (quantitative mapping, resolution of a few nanometers, and true correlation with topography), this novel biochemically sensitive imaging technique is a powerful complement to other advanced AFM modes for quantitative, high-resolution bioimaging.

Dual role for the O-acetyltransferase OatA in peptidoglycan modification and control of cell septation in Lactobacillus plantarum.

Until now, peptidoglycan O-acetyl transferases (Oat) were only described for their peptidoglycan O-acetylating activity and for their implication in the control of peptidoglycan hydrolases. In this study, we show that a Lactobacillus plantarum mutant lacking OatA is unable to uncouple cell elongation and septation. Wild-type cells showed an elongation arrest during septation while oatA mutant cells continued to elongate at a constant rate without any observable pause during the cell division process. Remarkably, this defect does not result from a default in peptidoglycan O-acetylation, since it can be rescued by wild-type OatA as well as by a catalytic mutant or a truncated variant containing only the transmembrane domain of the protein. Consistent with a potential involvement in division, OatA preferentially localizes at mid-cell before membrane invagination and remains at this position until the end of septation. Overexpression of oatA or its inactive variants induces septation-specific aberrations, including asymmetrical and dual septum formation. Overproduction of the division inhibitors, MinC or MinD, leads to cell filamentation in the wild type while curved and branched cells are observed in the oatA mutant, suggesting that the Min system acts differently on the division process in the absence of OatA. Altogether, the results suggest that OatA plays a key role in the spatio-temporal control of septation, irrespective of its catalytic activity.

Atomic force microscopy - looking at mechanosensors on the cell surface.

Living cells use cell surface proteins, such as mechanosensors, to constantly sense and respond to their environment. However, the way in which these proteins respond to mechanical stimuli and assemble into large complexes remains poorly understood at the molecular level. In the past years, atomic force microscopy (AFM) has revolutionized the way in which biologists analyze cell surface proteins to molecular resolution. In this Commentary, we discuss how the powerful set of advanced AFM techniques (e.g. live-cell imaging and single-molecule manipulation) can be integrated with the modern tools of molecular genetics (i.e. protein design) to study the localization and molecular elasticity of individual mechanosensors on the surface of living cells. Although we emphasize recent studies on cell surface proteins from yeasts, the techniques described are applicable to surface proteins from virtually all organisms, from bacteria to human cells.

Atomic force microscopy: a powerful tool for studying bacterial swarming motility.

Swarming motility is a fascinating phenomenon by which some bacteria use flagella to move over solid surfaces. Understanding the molecular mechanisms underlying swarming motility requires studying the factors that induce and control flagella expression in swarming cells. Traditionally, flagella are observed by optical or electron microscopy, but none of these techniques combine versatility and easiness, with quantitative and high-resolution information. We report an atomic force microscopy (AFM)-based approach for the fast imaging of bacterial phenotypes (cell shape, flagella expression) in swarming motility studies. Cells from the gram-positive bacterium Bacillus thuringiensis sv. israelensis were inoculated on energy-rich media containing increasing agar concentrations. Following swarming assays (2 days), the cell morphology and the amount of flagella were directly observed by AFM imaging in air. Consistent with the macroscopic swarming behavior, cells harvested from the rim of colonies spreading on soft agar were hyperflagellated, elongated and arranged in chains. Increasing the agar concentration led to much lower amounts of flagella and to shorter rod-shaped cells, a finding consistent with the slower swarming motility of the cells. Cells taken from colony centers on soft and hard agar surfaces were generally non-flagellated, rod-shaped, rarely arranged in chains, and exhibited lysis and sporulation. This study shows that AFM imaging can readily discriminate between swarming and non-swarming cells, and quantify their morphological details, thus offering an important tool to study the dynamics of bacterial populations.

Deciphering the nanometer-scale organization and assembly of Lactobacillus rhamnosus GG pili using atomic force microscopy.

In living cells, sophisticated functional interfaces are generated through the self-assembly of bioactive building blocks. Prominent examples of such biofunctional surfaces are bacterial nanostructures referred to as pili. Although these proteinaceous filaments exhibit remarkable structure and functions, their potential to design bioinspired self-assembled systems has been overlooked. Here, we used atomic force microscopy (AFM) to explore the supramolecular organization and self-assembly of pili from the Gram-positive probiotic bacterium Lactobacillus rhamnosus GG (LGG). High-resolution AFM imaging of cell preparations adsorbed on mica revealed pili not only all around the cells, but also in the form of remarkable star-like structures assembled on the mica surface. Next, we showed that two-step centrifugation is a simple procedure to separate large amounts of pili, even though through their synthesis they are covalently anchored to the cell wall. We also found that the centrifuged pili assemble as long bundles. We suggest that these bundles originate from a complex interplay of mechanical effects (centrifugal force) and biomolecular interactions involving the SpaC cell adhesion pilin subunit (lectin-glycan bonds, hydrophobic bonds). Supporting this view, we found that pili isolated from an LGG mutant lacking hydrophilic exopolysaccharides show an increased tendency to form tight bundles. These experiments demonstrate that AFM is a powerful platform for visualizing individual pili on bacterial surfaces and for unravelling their two-dimensional assembly on solid surfaces. Our data suggest that bacterial pili may provide a generic approach in nanobiotechnology for elaborating functional supramolecular interfaces assembled from bioactive building blocks.

Nanoscale imaging of Bacillus thuringiensis flagella using atomic force microscopy.

Because bacterial flagella play essential roles in various processes (motility, adhesion, host interactions, secretion), studying their expression in relation to function is an important challenge. Here, we use atomic force microscopy (AFM) to gain insight into the nanoscale surface properties of two wild-type and four mutant strains of Bacillus thuringiensis exhibiting various levels of flagellation. We show that, unlike AFM in liquid, AFM in air is a simple and reliable approach to observe the morphological details of the bacteria, and to quantify the density and dimensions of their flagella. We found that the amount of flagella expressed by the six strains, as observed at the nanoscale, correlates with their microscopic swarming motility. These observations provide novel information on flagella expression in gram-positive bacteria and demonstrate the power of AFM in genetic studies for the fast assessment of the phenotypic characteristics of bacterial strains altered in cell surface appendages.

Atomic force microscopy demonstrates that disulfide bridges are required for clustering of the yeast cell wall integrity sensor Wsc1.

In yeasts, cell surface stresses are detected by a family of plasma membrane sensors. Among these, Wsc1 contains an extracellular cysteine-rich domain (CRD), which mediates sensor clustering and is believed to anchor the sensor in the cell wall. Although the formation of Wsc1 clusters and their interaction with the intracellular pathway components are important for proper stress signaling, the molecular mechanisms underlying clustering remain poorly understood. Here, we used the combination of single-molecule atomic force microscopy (AFM) with genetic manipulations to demonstrate that Wsc1 clustering involves disulfide bridges of the CRD. Using AFM tips carrying nitrilotriacetate groups, we mapped the distribution of individual His-tagged sensors on living yeast cells. While Wsc1 formed nanoscale clusters on native cells, clustering was no longer observed after treatment with the reducing agent dithiothreitol (DTT), indicating that intra- or intermolecular disulfide bridges are required for clustering. Moreover, DTT treatment resulted in a significant increase in cell surface roughness, suggesting that disulfide bridges between other cell-wall proteins are crucial for proper cell surface topology. The remarkable sensor properties unravelled here may well apply to other sensors and receptors with cysteine-rich domains throughout biology. Our combined method of AFM with genetic manipulations offers great prospects to explore the mechanisms underlying the clustering of cell surface proteins.

Probing peptide-inorganic surface interaction at the single molecule level using force spectroscopy.

We investigate the interaction between D-Ala-D-Ala peptide and a stainless steel (SS) surface by AFM force spectroscopy with view to understand the role and nature of interfacial processes at the single molecule level. For this purpose, force-distance curves were recorded between the D-Ala-D-Ala modified tip and the SS surface in NaHCO(3)-enriched medium. The SS surface was prepared in a way that allows iron oxide species, presumably FeOOH, to be formed and remains stable during AFM measurements. Dynamic force measurements show that the unbinding force linearly increases with the logarithm of the loading rate, as generally observed for receptor­ligand complexes. Our results reveal also the existence of two regimes, suggesting the presence of multiple energy barriers in the energy landscape. From these dynamic force spectroscopy measurements, the kinetic off-rate constant is determined. An average unbinding force in the range of 50-300 pN is obtained, depending on the loading rate. Accordingly, in a medium in which the electrostatic interactions are not dominating, the binding mechanism of the peptide and SS surface cannot be attributed to covalent bonds and may be due to a combination of van der Waals and hydrogen bonds. Our findings open up new way to probe peptide-inorganic surface interactions and to understand the mechanism of peptide specific binding which is of particular interest in the design of hybrid materials.