Scavenging free radicals and soaring osteoinduction by extra cellular matrix protein-based nanocomposites on degenerative bone treatments.

A number of materials are now available to alleviate the ever-growing bone disruption. However, these are inadequate and inappropriate for addressing issues associated natural process of aging and degeneration of bone due to diseases. This study advances the existing material and offers more privileged and synergistically active remedy for these conditions. Here, they are three different nano-composites prepared such as nano-TiO2 with chitosan (TC), nano-TiO2 with chondroitin 4-sulfate (TG), and nano-TiO2 with chitosan and chondroitin 4-sulfate (TCG), whereas nano-TiO2 act as a control. The prepared nanocomposite was studied for determining its bactericidal and fungicidal activity by using disk diffusion method. In addition, the osteoinductive, free radical forming, and scavenging abilities of the nanocomposite treated MG-63 cell lines were analyzed using gene expression and biochemical analysis respectively. The augmented fungicidal (~16mm) activities of TCG against bone-infecting pathogens can be effectively used in bone transplantation application. The expression of osteoblast-inducing genes in MG-63 cell line and their up-regulation in nanocomposite treatment, especially in TCG, made this material more desirable. The formation of free radicals such as thiobarbituric acid reactive substance and nitric oxide gradually reduced with the treatment of nanocomposites than control and nano-TiO2. Contrarily, it was found that MG-63 along with nanocomposites statistically increases the production of ALP, antioxidant enzymes (super oxide mutase) and total antioxidant activity (ferric reducing antioxidant power) in several folds compare with the control and nano-TiO2. All the results with statistical scale suggest TCG as an effectual and affordable biomaterial in bone regeneration therapy among the prepared samples.

Facile sonochemical synthesis of nanostructured NiO with different particle sizes and its electrochemical properties for supercapacitor application.

In this work, we demonstrate the influence of nickel oxides with divergent particle sizes as the working electrodes for supercapacitor application. The nanostructured nickel oxide (NiO) is synthesized via facile sonochemical method, followed by calcination process. The crystallinity and surface purity of prepared samples are clearly examined by X-ray diffraction and Raman analysis. NiO crystallinity is significantly increased with increasing calcination temperatures. The surface analysis confirmed that the calcination at 250°C exhibited nanoclutser like NiO with average particle size of ∼6nm. While increasing the calcination temperature beyond 250°C, hexagonal shaped NiO is observed with enhanced particle sizes. The electrochemical performance confirmed the good redox behavior of NiO electrodes. Moreover, NiO with average particle size of ∼6nm exhibited high specific capacitance of 449F/g at a scan rate of 5mV/s compared to other samples with particle sizes of ∼21nm (323F/g) and ∼41nm (63F/g). This is due to the good ion transfer mechanism and effective electrochemical utilization of the working electrode.

Conducting polymer and its composite materials based electrochemical sensor for Nicotinamide Adenine Dinucleotide (NADH).

Nicotinamide Adenine Dinucleotide (NADH) is an important coenzyme in the human body that participates in many metabolic reactions. The impact of abnormal concentrations of NADH significantly causes different diseases in human body. Electrochemical detection of NADH using bare electrode is a challenging task especially in the presence of main electroactive interferences such as ascorbic acid (AA), uric acid (UA) and dopamine (DA). Modified electrodes have been widely explored to overcome the problems of poor sensitivity and selectivity occurred from bare electrodes. This review gives an overview on the progress of using conducting polymers, polyelectrolyte and its composites (co-polymer, carbonaceous, metal, metal oxide and clay) based modified electrodes for the sensing of NADH. In addition, developments on the fabrication of numerous conducting polymer composites based modified electrodes are clearly described.

Development of nanostructured ZnO thin film via electrohydrodynamic atomization technique and its photoconductivity characteristics.

This article presents the non-vacuum technique for the preparation of nanostructured zinc oxide (ZnO) thin film on glass substrate through electrohydrodynamic atomization (EHDA) technique. The detailed process parameters for achieving homogeneous ZnO thin films are clearly discussed. The crystallinity and surface morphology of ZnO thin film are investigated by X-ray diffraction and field emission scanning electron microscopy. The result shows that the deposited ZnO thin film is oriented in the wurtzite phase with void free surface morphology. The surface roughness of deposited ZnO thin film is found to be ~17.8 nm. The optical properties of nanostructured ZnO thin films show the average transmittance is about 90% in the visible region and the energy band gap is found to be 3.17 eV. The surface chemistry and purity of deposited ZnO thin films are analyzed by fourier transform infrared and X-ray photoelectron spectroscopy, conforming the presence of Zn-O in the deposited thin films without any organic moiety. The photocurrent measurement of nanostructured ZnO thin film is examined in the presence of UV light illumination with wavelength of 365 nm. These results suggest that the deposited nanostructured ZnO thin film through EHDA technique possess promising applications in the near future.

Fabrication of nanostructured copper indium diselenide (CIS) thin films by electrohydrodynamic atomization technique.

In this article, we report a non-vacuum electrohydrodynamic atomization (EHDA) technique for deposition of CulnSe2 (CIS) thin films. The CIS ink has been prepared with three different concentrations (7.5 wt.%, 12.5 wt.% and 15 wt.%) by using suitable solvent mixture (ethanol:terpineol as 1:1 molar ratio) with surfactant to achieve a stable dispersions. The important physical parameters for achieving homogeneous with non-agglomerated CIS layers through EHDA technique are investigated in detail. The X-ray diffraction pattern confirms the crystalline structure of CIS layers oriented in the chalcopyrite phase. The film uniformity has been investigated by field emission scanning electron microscopy. Different thickness of CIS layers has been achieved by varying the concentration of CIS particles in the precursor ink solution. The optical properties of CIS layers show the two optical band gaps in UV-visible and near infra-red (NIR) region with band gap of about 2.67-2.49 eV and 1.34-1.29 eV respectively. The energy band gap of CIS thin films have been decreased with the increase of film thickness. The X-ray photoelectron spectra confirmed presence of binding energy corresponding to CulnSe2. The electrical study observed the sheet resistivity 76-33 Omega cm with respect to film thickness.

Structural and electrical properties of Ag grid/poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) coatings for diode application through advanced printing technology.

This paper is focused on printed techniques for the fabrication of hybrid structure of silver (Ag) grid/poly(3,4-ethylenedioxythiophene): Poly(styrenesulfonate) (PEDOT:PSS) on polyethylene terepthalate (PET) as a flexible substrate. Ag grid has been printed on PET substrate by using gravure offset printing process, followed by PEDOT:PSS thin film deposition on Ag grid through electrohydrodynamic atomization (EHDA) technique. The important parameters for achieving uniform hybrid structure of Ag grid/PEDOT:PSS through printed techniques have been clearly discussed. Field emission scanning electron microscope studies revealed the uniformity of printed Ag grid with homogeneous deposition of PEDOT:PSS on Ag grid. The optical properties of Ag grid/PEDOT:PSS were measured by UV-visible spectroscopy, which showed nearly 80-82% of transparency in the visible region and it was nearly same as PEDOT:PSS thin film on PET substrate. Current-voltage (I-V) analysis of fabricated hybrid device by using printed Ag grid/PEDOT:PSS as a bottom electrode showed good rectifying behavior with possible interfacial mechanisms. Capacitance-voltage (C-V) analysis was carried over different frequencies. These results suggest that fabrication of hybrid structure through printed techniques will play a significant role in mass production of printed electronic devices for commercial application by using flexible substrate.