Considering the bioavailability and bioaccessibility of metal(loid)s for risk assessment of soils affected by different non-ferrous metal activities in Southwest China.

Toxic metal(loid)s released into the soil by non-ferrous metal mining and smelting activities pose a serious threat to residents and the surrounding ecosystem. Considering only total metal(loid) concentrations likely overestimates routine (eco)toxicological risk assessment of soil. We hypothesize that considering metal(loid) bioavailability/accessibility will improve the accuracy of risk assessment. To test this hypothesis, four mining areas in Southwest China, including mining and surrounding sites, were studied. Bioavailability was determined considering metal(loid)s leached by a simulated strong acid rain (SSAR) treatment. In the four areas, the mining site showed higher cumulative releases of metal(loid)s under SSAR treatment than the agricultural field located in the surrounding sites. Thus, the bioavailable metal(loid)s contents were continuously being released during SSAR treatment and likely increased the environmental risk. Ecological and health risk assessment of soil, calculated using total metal(loid)s content, was corrected considering bioavailable/accessible metal(loid)s, which was determined by the heavy metal(loid)s forms and in vitro simulated intestinal stages. Although the corrected indices indicated that the risk of metal(loid)s-contaminated soil was reduced, unfavorable ecological and health risks remained in the four areas. Our study provides new perspectives to better predict the risk of bioavailable/accessible metal(loid)s in non-ferrous metal contaminated and surrounding soils.

A critical review on bioremediation technologies of metal(loid) tailings: Practice and policy.

Globally, most high-grade ores have already been exploited. Contemporary mining tends to focus on the extraction of lower-grade ores thereby leaving large stored tailings open to the environment. As a result, current mines have emerged as hotspots for the migration of metal(loid)s and resistance genes, thereby potentially contributing to a looming public health crisis. Therefore, the management and remediation of tailings are the most challenging issues in environmental ecology. Bioremediation, a cost-effective solution for the treatment of multi-element mixed pollution (co-contamination), shows promise for the restoration of mine tailings. This review focuses on the bioremediation technologies developed to untangle the issues of non-ferrous metal mine tailings. These technologies address the environmental risks of multi-element exposure to the ecosystem and human health risks. It provides a review and comparison of current bioremediation technologies used to mineralize metal(loid)s. The role of plant-microorganisms and their mechanisms in the remediation of tailings are also discussed. The importance of "treating waste with wastes" is crucial for advancing bioremediation technologies. This approach underscores the potential for waste materials to contribute to environmental cleanup processes. The concept of a circular economy is pertinent in this context, emphasizing recycling and reuse. There's an immediate need for international collaboration. Collaboration is needed in policy-making, funding, and data accessibility. Sharing data is essential for the growth of bioremediation globally.

Effects of soil metal(loid)s pollution on microbial activities and environmental risks in an abandoned chemical smelting site.

Abandoned chemical smelting sites containing toxic substances can seriously threaten and pose a risk to the surrounding ecological environment. Soil samples were collected from different depths (0 to 13 m) and analyzed for metal(loid)s content and fractionation, as well as microbial activities. The potential ecological risk indices for the different soil depths (ordered from high to low) were: 1 m (D-1) > surface (S-0) > 5 m (D-5) > 13 m (D-13) > 9 m (D-9), ranging between 1840.65-13,089.62, and representing extremely high environmental risks, of which Cd (and probably not arsenic) contributed to the highest environmental risk. A modified combined pollution risk index (MCR) combining total content and mobile proportion of metal(loid)s, and relative toxicities, was used to evaluate the degree of contamination and potential environmental risks. For the near-surface samples (S-0 and D-1 layers), the MCR considered that As, Cd, Pb, Sb, and Zn achieved high and alarming degrees of contamination, whereas Fe, Mn, and Ti were negligible or low to moderate pollution degrees. Combined microcalorimetry and enzymatic activity measurements of contaminated soil samples were used to assess the microbial metabolic activity characteristics. Correlation analysis elucidated the relationship between metal(loid)s exchangeable fraction or content and microbial activity characteristics (p < 0.05). The microbial metabolic activity in the D-1 layer was low presumably due to heavy metal stress. Enzyme activity indicators and microcalorimetric growth rate (k) measurements were considered sensitive indicators to reflect the soil microbial activities in abandoned chemical smelting sites.

Bioindicator responses to extreme conditions: Insights into pH and bioavailable metals under acidic metal environments.

Acid mine drainage (AMD) caused environmental risks from heavy metal pollution, requiring treatment methods such as chemical precipitation and biological treatment. Monitoring and adapting treatment processes was crucial for success, but cost-effective pollution monitoring methods were lacking. Using bioindicators measured through 16S rRNA was a promising method to assess environmental pollution. This study evaluated the effects of AMD on ecological health using the ecological risk index (RI) and the Risk Assessment Code (RAC) indices. Additionally, we also examined how acidic metal stress affected the diversity of bacteria and fungi, as well as their networks. Bioindicators were identified using linear discriminant analysis effect size (LEfSe), Partial least squares regression (PLS-R), and Spearman analyses. The study found that Cd, Cu, Pb, and As pose potential ecological risks in that order. Fungal diversity decreased by 44.88% in AMD-affected areas, more than the 33.61% decrease in bacterial diversity. Microbial diversity was positively correlated with pH (r = 0.88, p = 0.04) and negatively correlated with bioavailable metal concentrations (r = -0.59, p = 0.05). Similarly, microbial diversity was negatively correlated with bioavailable metal concentrations (bio_Cu, bio_Pb, bio_Cd) (r = 0.79, p = 0.03). Acidiferrobacter and Thermoplasmataceae were prevalent in acidic metal environments, while Puia and Chitinophagaceae were identified as biomarker species in the control area (LDA>4). Acidiferrobacter and Thermoplasmataceae were found to be pH-tolerant bioindicators with high reliability (r = 1, P < 0.05, BW > 0.1) through PLS-R and Spearman analysis. Conversely, Puia and Chitinophagaceae were pH-sensitive bioindicators, while Teratosphaeriaceae was a potential bioindicator for Cu-Zn-Cd metal pollution. This study identified bioindicator species for acid and metal pollution in AMD habitats. This study outlined the focus of biological monitoring in AMD acidic stress environments, including extreme pH, heavy metal pollutants, and indicator species. It also provided essential information for heavy metal bioremediation, such as the role of omics and the effects of organic matter on metal bioavailability.

Effects of three plant growth-promoting bacterial symbiosis with ryegrass for remediation of Cd, Pb, and Zn soil in a mining area.

The quality of soil containing heavy metals (HMs) around nonferrous metal mining areas is often not favorable for plant growth. Three types of plant growth promoting rhizobacteria (PGPR)-assisted ryegrass were examined here to treat Cd, Pb, and Zn contaminated soil collected from a nonferrous metal smelting facility. The effects of PGPR-assisted plants on soil quality, plant growth, and the migration and transformation of HMs were evaluated. Results showed that inter-root inoculation of PGPR to ryegrass increased soil redox potential, urease, sucrase and acid phosphatase activities, microbial calorimetry, and bioavailable P, Si, and K content. Inoculation with PGPR also increased aboveground parts and root length, P, Si, and K contents, and antioxidant enzyme activities. The most significant effect was that the simultaneous inoculation of all three PGPRs increased the ryegrass extraction (%) of Cd (59.04-79.02), Pb (105.56-157.13), and Zn (27.71-40.79), compared to CK control (without fungi). Correspondingly, the inter-root soil contents (%) of total Cd (39.94-57.52), Pb (37.59-42.17), and Zn (34.05-37.28) were decreased compared to the CK1 control (without fungi and plants), whereas their bioavailability was increased. Results suggest that PGPR can improve soil quality in mining areas, promote plant growth, transform the fraction of HMs in soil, and increase the extraction of Cd, Pb, and Zn by ryegrass. PGPR is a promising microbe-assisted phytoremediation strategy that can promote the re-greening of vegetation in the mining area while remediating HMs pollution.

Unraveling assemblage of microbial community dwelling in Dabaoshan As/Pb/Zn mine-impacted area: A typical mountain mining area of South China.

Microbial community assemblage includes microorganisms from the three domains including Bacteria, Archaea, and Eukarya (Fungi), which play a crucial role in geochemical cycles of metal(loid)s in mine tailings. Mine tailings harbor vast proportions of metal(loid)s, representing a unique source of co-contamination of metal(loid)s that threaten the environment. The elucidation of the assembly patterns of microbial communities in mining-impacted ecospheres has received little attention. To decipher the microbial community assembly processes, the microbial communities from the five sites of the Dabaoshan mine-impacted area were profiled by the MiSeq sequencing of 16S rRNA (Bacteria and Archaea) genes and internal transcribed spacers (Fungi). Results indicated that the coexistence of 31 bacterial, 10 fungal, and 3 archaeal phyla, were mainly dominated by Mucilaginibacter, Cladophialophora, and Candidatus Nitrosotalea, respectively. The distribution of microorganisms was controlled by deterministic processes. The combination of Cu, Pb, and Sb was the main factor explaining the structure of microbial communities. Functional predicting analysis of bacteria and archaea based on the phylogenetic investigation of communities by reconstruction of unobserved states analyses revealed that the metabolic pathways related to arsenite transporter, arsenate reductase, and FeS cluster were important for metal detoxification. Furthermore, the ecological guilds (pathogens, symbiotrophs, and saprotrophs) of fungal communities explained 44.5 % of functional prediction. In addition, metal-induced oxidative stress may be alleviated by antioxidant enzymes of fungi communities, such as catalase. Such information provides new insights into the microbial assembly rules in co-contaminated sites.

Contrasting response strategies of sulfate-reducing bacteria in a microbial consortium to As3+ stress under anaerobic and aerobic environments.

The sulfate-reducing efficiency of sulfate-reducing bacteria (SRB) is strongly influenced by the presence of oxygen, but little is known about the oxygen tolerance mechanism of SRB and the effect of oxygen on the metalliferous immobilization by SRB. The performance evaluation, identification of bioprecipitates, and microbial and metabolic process analyses were used here to investigate the As3+ immobilization mechanisms and survival strategies of the SRB1 consortium under different oxygen-containing environments. Results indicated that the sulfate reduction efficiency was significantly decreased under aerobic (47.37%) compared with anaerobic conditions (66.72%). SEM analysis showed that under anaerobic and aerobic conditions, the morphologies of mineral particles were different, whereas XRD and XPS analyses showed that the most of As3+ bioprecipitates under both conditions were arsenic minerals such as AsS and As4S4. The abundances of Clostridium_sensu_stricto_1, Desulfovibrio, and Thiomonas anaerobic bacteria were significantly higher under anaerobic than aerobic conditions, whereas the aerobic Pseudomonas showed an opposite trend. Network analysis revealed that Desulfovibrio was positively correlated with Pseudomonas. Metabolic process analysis confirmed that under aerobic conditions the SRB1 consortium generated additional extracellular polymeric substances (rich in functionalities such as Fe-O, SO, CO, and -OH) and the anti-oxidative enzyme superoxide dismutase to resist As3+ stress and oxygen toxicity. New insights are provided here into the oxygen tolerance and detoxification mechanism of SRB and provide a basis for the future remediation of heavy metal(loid)-contaminated environments.

Mining-related multi-resistance genes in sulfate-reducing bacteria treatment of typical karst nonferrous metal(loid) mine tailings in China.

Management of tailings at metal mine smelter sites can reduce the potential hazards associated with exposure to toxic metal(loid)s and residual organic flotation reagents. In addition, microbes in the tailings harboring multi-resistance genes (e.g., tolerance to multiple antimicrobial agents) can cause high rates of morbidity and global economic problems. The potential co-selection mechanisms of antibiotic resistance genes (ARGs) and metal(loid) resistance genes (MRGs) during tailings sulfate-reducing bacteria (SRB) treatment have been poorly investigated. Samples were collected from a nonferrous metal mine tailing site treated with an established SRB protocol and were analyzed for selected geochemical properties and high throughput sequencing of 16S rRNA gene barcoding. Based on the shotgun metagenomic analysis, the bacterial domain was dominant in nonferrous metal(loid)-rich tailings treated with SRB for 12 months. KEGGs related to ARGs and MRGs were detected. Thiobacillus and Sphingomonas were the main genera carrying the bacA and mexEF resistance operons, along with Sulfuricella which were also found as the main genera carrying MRGs. The SRB treatment may mediate the distribution of numerous resistance genes. KOs based on the metagenomic database indicated that ARGs (mexNW, merD, sul, and bla) and MRGs (czcABCR and copRS genes) were found on the same contig. The SRB strains (Desulfosporosinus and Desulfotomaculum), and the acidophilic strain Acidiphilium significantly contributed to the distribution of sul genes. The functional metabolic pathways related to siderophores metabolism were largely from anaerobic genera of Streptomyces and Microbacterium. The presence of arsenate reductase, metal efflux pump, and Fe transport genes indicated that SRB treatment plays a key role in the metal(loid)s transformation. Overall, our findings show that bio-treatment is an effective tool for managing ARGs/MRGs and metals in tailings that contain numerous metal(loid) contaminants.

Functional redundancy in response to runoff input upholds microbial community in hydrocarbon-contaminated land-sea continuum.

An experimental approach mimicking the land-sea continuum in microcosms was developed in order to determine the effect of the terrigenous inputs by soil runoff on the microbial functional potential in hydrocarbon (HC) contaminated marine coastal sediment. We hypothesized that the coalescent event increases the functional potential of microbial communities in marine coastal sediments, influencing the fate of HC in marine coastal ecosystems. The microbial functional potential including the HC degradation ability was assessed by DNA-array to compare the sediment receiving or not terrigenous inputs. The removal of HC and the functional gene richness in sediment was unchanged with the terrigenous inputs. However, the gene variants (GVs) composition was modified indicating functional redundancy. In addition, functional indicators including GVs related to sulfite reduction, denitrification and polyaromatic degradation were identified in higher proportion in sediment receiving terrigenous inputs. The terrigenous inputs modified the functional co-occurrence networks, showing a reorganization of the GVs associations with an increase of the network complexity. Different keystone GVs ensuring similar functions were identified in networks with or without terrigenous inputs, further confirming functional redundancy. We argue that functional redundancy maintains the structure of microbial community in hydrocarbon-contaminated land-sea continuum mixing zone. Our results provide helpful functional information for the monitoring and management of coastal environment affected by human land-based activities.

Microbial metabolic activity in metal(loid)s contaminated sites impacted by different non-ferrous metal activities.

Many non-ferrous metal mining and smelting activities have caused severe metal(loid) contamination in the local soil environment. The metabolic activity of soil microorganisms in four areas affected by different metallurgical activities (production vs. waste disposal) was characterized using a contamination gradient from the contaminated site to the surrounding soils. Results indicated that the soil microcalorimetric and enzyme activities were correlated with the fractionated metal(loid) properties (p < 0.05). All four areas had high total As, Cd, Pb, Sb, and Zn concentrations, of which mobile As, Cu, Ni, Pb, Sb, and Zn were higher in the contaminated sites than the surrounding sites, reflecting an elevated environmental risk. Three contaminated site areas had lower microbial activities than their surrounding sites suggesting that high metal(loid) concentrations inhibited soil microbial communities. Interestingly, the fourth area (tailing pond) showed an opposite trend (i.e., increased microbial activity in contaminated vs. surrounding areas). The microbial thermodynamic parameters of this contaminated site were higher than its surrounding sites, suggesting that the selected microbial communities can develop a functional resistance to metal(loid)s stress. This study provides a theoretical basis for ecological prevention and control of metal-polluted areas.

CRISPR-Cas9 enrichment, a new strategy in microbial metagenomics to investigate complex genomic regions: The case of an environmental integron.

Environmental integrons are ubiquitous in natural microbial communities, but they are mostly uncharacterized and their role remains elusive. Thus far, research has been hindered by methodological limitations. Here, we successfully used an innovative approach combining CRISPR-Cas9 enrichment with long-read nanopore sequencing to target, in a complex microbial community, a putative adaptive environmental integron, InOPS, and to unravel its complete structure and genetic context. A contig of 20 kb was recovered containing the complete integron from the microbial metagenome of oil-contaminated coastal sediments. InOPS exhibited typical integron features. The integrase, closely related to integrases of marine Desulfobacterota, possessed all the elements of a functional integron integrase. The gene cassettes harboured mostly unknown functions hampering inferences about their ecological importance. Moreover, the putative InOPS host, likely a hydrocarbonoclastic marine bacteria, raises questions as to the adaptive potential of InOPS in response to oil contamination. Finally, several mobile genetic elements were intertwined with InOPS highlighting likely genomic plasticity, and providing a source of genetic novelty. This case study showed the power of CRISPR-Cas9 enrichment to elucidate the structure and context of specific DNA regions for which only a short sequence is known. This method is a new tool for environmental microbiologists working with complex microbial communities to target low abundant, large or repetitive genetic structures that are difficult to obtain by classical metagenomics. More precisely, here, it offers new perspectives to comprehensively assess the eco-evolutionary significance of environmental integrons.

Les intégrons environnementaux sont omniprésents dans les communautés microbiennes naturelles, mais la plupart ne sont pas caractérisés et leur rôle reste obscur. A ce jour, les limitations méthodologiques ont restreint leur étude. Ici, nous avons utilisé avec succès une approche innovante, combinant l'enrichissement par CRISPR-Cas9 et le séquençage nanopore longs-fragments, pour cibler, dans une communauté microbienne complexe, un intégron environnemental potentiellement adaptatif, InOPS, et pour révéler sa structure complète et son contexte génétique. Un contig de 20 kb contenant l'intégron complet a été obtenu à partir du métagénome microbien de sédiments côtiers contaminés par du pétrole. InOPS présente les caractéristiques typiques d'un intégron. Son intégrase, proche des intégrases des Desulfobacterota marines, possède tous les éléments d'une intégrase d'intégron fonctionnelle. Les cassettes de gène ont des fonctions pour la plupart inconnues, ce qui empêche d'inférer leur importance écologique. De plus, l'hôte présumé d'InOPS, probablement une bactérie marine hydrocarbonoclaste, interroge sur le potentiel adaptatif d'InOPS en réponse à la contamination par le pétrole. En outre, la présence de plusieurs éléments génétiques mobiles dans le contig met en évidence une probable plasticité génomique qui pourrait être source de remaniements génétiques. Cette étude de cas a montré la puissance de l'enrichissement par CRISPR-Cas9 pour élucider la structure et le contexte de régions d'ADN spécifiques pour lesquelles seule une courte séquence est connue. Cette méthode fournit un nouvel outil aux microbiologistes environnementaux travaillant avec des communautés microbiennes complexes pour cibler des structures génétiques peu abondantes, larges ou répétées, qui sont difficiles à obtenir par métagénomique classique. Plus précisément, elle offre ici de nouvelles perspectives pour évaluer de manière exhaustive l'importance éco-évolutive des intégrons environnementaux.

New insights on the effect of non-ferrous metal mining and smelting activities on microbial activity characteristics and bacterial community structure.

Mining and smelting activities have brought potentially serious heavy metal(loid)s pollution to their surrounding locale. However, studies on microbial metabolic activities, community structure, and adaptation in soils proximal to non-ferrous metal mining and smelting areas are still lacking. Here the effects of biotic and abiotic characteristics of soil taken from sites surrounding inactive and active non-ferrous metal mine smelting facilities on microbial enzyme activity, microcalorimetry, and high-throughput sequencing of 16S rRNA gene barcoding were studied. Data indicated that the soils were heavily polluted by toxic metal(loid)s, of which As and Cd were the main contaminants. Microbial acid phosphatase activity and microcalorimetric total heat value were sensitive metabolic indicators in the studied areas. Actinobacteriota had the highest relative abundance, followed by Proteobacteria, Chloroflexi, and Acidobacteria. Microbial metabolic activity, bacterial community structure and phenotype varied between inactive and active sites (p < 0.05). Such analyses indicated that electrical conductivity, total As, Cu, and Mn contents, and bioavailable As, Cu, Cd, and Mn concentrations were key factors determining microbial activities, bacterial community structure, and phenotypes. Knowledge of microbial adaptation to heavy metal stressors is important for better understanding the aerial transfer of fugitive heavy metal(loid)s (and possibly microbes) and for designing future strategies for improved soil bioremediation.

Assembly processes of bacterial and fungal communities in metal(loid)s smelter soil.

There are few studies on concurrent bacterial and fungal community assembly processes that govern the metal(loid)s biogeochemical cycles at smelters. Here, a systematic investigation combined geochemical characterization, co-occurrence patterns, and assembly mechanisms of bacterial and fungal communities inhabiting soils around an abandoned arsenic smelter. Acidobacteriota, Actinobacteriota, Chloroflexi, and Pseudomonadota were dominant in bacterial communities, whereas Ascomycota and Basidiomycota dominated fungal communities. The random forest model indicated the bioavailable fractions of Fe (9.58%) were the main positive factor driving the beta diversity of bacterial communities, and the total N (8.09%) was the main negative factor for fungal communities. Microbe-contaminant interactions demonstrate the positive impact of the bioavailable fractions of certain metal(loid)s on bacteria (Comamonadaceae and Rhodocyclaceae) and fungi (Meruliaceae and Pleosporaceae). The fungal co-occurrence networks exhibited more connectivity and complexity than the bacterial networks. The keystone taxa were identified in bacterial (including Diplorickettsiaceae, norank_o_Candidatus_Woesebacteria, norank_o_norank_c_AT-s3-28, norank_o_norank_c_bacteriap25, and Phycisphaeraceae) and fungal (including Biatriosporaceae, Ganodermataceae, Peniophoraceae, Phaeosphaeriaceae, Polyporaceae, Teichosporaceae, Trichomeriaceae, Wrightoporiaceae, and Xylariaceae) communities. Meanwhile, community assembly analysis revealed that deterministic processes dominated the microbial community assemblies, which were highly impacted by pH, total N, and total and bioavailable metal(loid) content. This study provides helpful information to develop bioremediation strategies for the mitigation of metal(loid)s-polluted soils.

Vertical organization of microbial communities in Salineta hypersaline wetland, Spain.

Microbial communities inhabiting hypersaline wetlands, well adapted to the environmental fluctuations due to flooding and desiccation events, play a key role in the biogeochemical cycles, ensuring ecosystem service. To better understand the ecosystem functioning, we studied soil microbial communities of Salineta wetland (NE Spain) in dry and wet seasons in three different landscape stations representing situations characteristic of ephemeral saline lakes: S1 soil usually submerged, S2 soil intermittently flooded, and S3 soil with halophytes. Microbial community composition was determined according to different redox layers by 16S rRNA gene barcoding. We observed reversed redox gradient, negative at the surface and positive in depth, which was identified by PERMANOVA as the main factor explaining microbial distribution. The Pseudomonadota, Gemmatimonadota, Bacteroidota, Desulfobacterota, and Halobacteriota phyla were dominant in all stations. Linear discriminant analysis effect size (LEfSe) revealed that the upper soil surface layer was characterized by the predominance of operational taxonomic units (OTUs) affiliated to strictly or facultative anaerobic halophilic bacteria and archaea while the subsurface soil layer was dominated by an OTU affiliated to Roseibaca, an aerobic alkali-tolerant bacterium. In addition, the potential functional capabilities, inferred by PICRUSt2 analysis, involved in carbon, nitrogen, and sulfur cycles were similar in all samples, irrespective of the redox stratification, suggesting functional redundancy. Our findings show microbial community changes according to water flooding conditions, which represent useful information for biomonitoring and management of these wetlands whose extreme aridity and salinity conditions are exposed to irreversible changes due to human activities.

Quantifying ecological and human health risks of metal(loid)s pollution from non-ferrous metal mining and smelting activities in Southwest China.

The environmental release and transfer of heavy metal(loids) from natural and anthropogenic sources to neighboring habitats can pose an ecological threat to the exposed biota and habitat, as well as a human health risk to the residents. However, analytical tools to identify the potential contamination source(s) and assess the impact of this transfer have not been well described. Soil samples were collected from affected areas proximal to non-ferrous metal(loid)s mining and smelting facilities. Two integrated assessment methods, based on soil total metal(loid) content, included: (1) the potential ecological risk index combined with positive matrix factorization (PMF) and (2) human health risk assessment combined with PMF. Results indicated that there were four generic sources of pollution (based on PMF analyses of 115 replicated samples collected from four study areas): agricultural and industrial activities, traffic emissions, and natural sources. For ecological risk, the contribution of these metal(loid)s pollution sources were industrial activities (20.34-70.76 %), traffic emissions (18.73-56.93 %), natural sources (3.69-27.02 %), and agricultural activities (3.79-21.43 %). Health risks were higher for children than for adults. Industrial activity was a major source of non-carcinogenic risk to children (32.10-74.62 %) and adults (31.33-73.78 %), and carcinogenic risk to children (22.53-67.27 %) and adults (20.69-64.76 %). Total metal analysis indicated that As and Cd were highly enriched in the soil, but chemical fractionation revealed low As mobility. Total Cd and possibly As were the main pollutants causing the ecological risks at these contaminated sites. This study demonstrates that ecological and human health risks could be quantified to prioritize the pollution sources for reasonable contaminated site risk management.

Marine Fungi Select and Transport Aerobic and Anaerobic Bacterial Populations from Polycyclic Aromatic Hydrocarbon-Contaminated Sediments.

The organization of microbial communities in marine sediment relies on complex biotic and abiotic interactions. Among them, the interaction between fungi and bacteria plays a crucial role building specific microbial assemblages, resulting in metabolic networks adapted to environmental conditions. The fungal-bacterial interaction (FBI) includes bacterial translocation via fungal mycelia, allowing bacterial dispersion, and ecological niche colonization. In order to demonstrate that the translocation of bacteria through fungal mycelia involves bacterial selection, the mycelia of two fungi isolated from marine coastal sediment, Alternaria destruens F10.81 and Fusarium pseudonygamai F5.76, showing different strategies for uptake of polycyclic aromatic hydrocarbon (PAH), homogenous internalization and vacuole forming respectively, were used to translocate bacteria through hydrophobic hydrocarbon contaminated sediments. A. destruens F10.81 selected four specific bacteria, while bacterial selection by F. pseudonygamai F5.76 was not evident. Among the bacteria selected by A. destruens F10.81, Spirochaeta litoralis, known as strictly anaerobic bacterium, was identified, indicating that A. destruens F10.81 selects and transports both aerobic and anaerobic bacteria. Such a result is consistent with the observed formation of anoxic micro-niches in areas surrounding and affected by fungal hyphae. Our findings provide new insights on the selection and dispersion of bacterial communities by fungi, which are crucial for the organization of microbial communities and their functioning in coastal PAH-contaminated sediments. IMPORTANCE The study provides advances for understanding fungal-bacterial relationships, particularly on the selection and dispersion of bacterial communities by fungi, which are crucial for the organization of microbial communities and their functioning in coastal PAH-contaminated sediments. The transportation of bacteria via fungal hyphae (fungal highway) results in bacterial selection; in particular, fungal hyphae offer adequate conditions for the transport of both aerobic and anaerobic bacteria through hydrophobic patches for the colonization of novel niches.

Keystone microbial taxa organize micropollutant-related modules shaping the microbial community structure in estuarine sediments.

The fluctuation of environmental conditions drives the structure of microbial communities in estuaries, highly dynamic ecosystems. Microorganisms inhabiting estuarine sediments play a key role in ecosystem functioning. They are well adapted to the changing conditions, also threatened by the presence of pollutants. In order to determine the environmental characteristics driving the organization of the microbial assemblages, we conducted a seasonal survey along the Adour Estuary (Bay of Biscay, France) using 16S rRNA gene Illumina sequencing. Microbial diversity data were combined with a set of chemical analyses targeting metals and pharmaceuticals. Microbial communities were largely dominated by Proteobacteria (41 %) and Bacteroidota (32 %), showing a strong organization according to season, with an important shift in winter. The composition of microbial communities showed spatial distribution according to three main areas (upstream, middle, and downstream estuary) revealing the influence of the Adour River. Further analyses indicated that the microbial community was influenced by biogeochemical parameters (Corg/Norg and δ13C) and micropollutants, including metals (As, Cu, Mn, Sn, Ti, and Zn) and pharmaceuticals (norfloxacin, oxolinic acid and trimethoprim). Network analysis revealed specific modules, organized around keystone taxa, linked to a pollutant type, providing information of paramount importance to understand the microbial ecology in estuarine ecosystems.

Cold sediment microbial community shifts in response to crude oil water-accommodated fraction with or without dispersant: a microcosm study.

In cold environments, the low temperature slows down microbial metabolisms, such as the biodegradation processes of hydrocarbons, which are often stimulated by the addition of dispersants in oil spill disasters. In this study, we investigated the effects of hydrocarbon water-accommodated fraction (WAF) prepared with and without dispersant on benthic microbial communities in a microcosm experiment in which hydrocarbon removal was observed. Both WAFs contained similar polycyclic aromatic hydrocarbon (PAH) content. The microcosm experiment, set up with either pristine or contaminated sediments, was conducted for 21 days at 4 °C under WAF and WAF + dispersant conditions. The behavior of bacterial communities in response to WAF and WAF + dispersant was examined at both DNA and RNA levels, revealing the effect of WAF and WAF + dispersant on the resident and active communities respectively. The contaminated sediment showed less taxa responsive to the addition of both WAF and WAF + dispersant than the pristine sediment, indicating the legacy effect by the presence hydrocarbon-degrading and dispersant-resistant taxa inhabiting the contaminated sediment.

Active tailings disturb the surrounding vegetation soil fungal community: Diversity, assembly process and co-occurrence patterns.

Soil fungi play an important role in the soil biogeochemical cycle and are important biological indicators for the ecological remediation of mine tailings contaminated sites, therefore understanding the characteristics of soil fungal communities is a key aspect of pollution remediation. However, the influence of biological factors on the characteristics of fungal community diversity; assembly mechanisms and co-occurrence patterns of fungal community along environmental gradients around tailings are not well understood. In this study, soil samples from forest, agriculture and grass around tailings were collected to reveal the assembly mechanisms and co-occurrence patterns of soil fungal community and to quantify the contribution of abiotic and biotic factors to fungal diversity. The results suggest that vegetation types and Cu concentration together drive the distribution of fungal diversity. We found that Exophiala has potential as a biomarker species indicative of restoration progress. Increased environmental stress accelerates the process of changing fungal community assemblages from stochastic to deterministic, while also allowing fungal communities tend to resist tailings-induced environmental stresses through species coexistence. Together, this study provides new insights into the influence of biological factors on fungal community diversity, as well as revealing mechanisms of fungal community assembly and co-occurrence patterns, which are important for understanding the maintenance mechanisms of fungal community diversity and ecological remediation of tailings-contaminated soils.

New insights into microbial community coalescence in the land-sea continuum.

The land-sea continuum constitutes a mixing zone where soil microbial communities encounter, via runoff, those inhabiting marine coastal sediment resulting in community coalescence. Here, we propose an experimental approach, mimicking the land-sea continuum, to study the microbial community coalescence events in different situations, by 16S and 18S rRNA genes metabarcoding. The microbial community structure of sediment diverged with the soil inputs. For prokaryotes, phylogenetic enrichment and amplicon sequence variants (ASVs) replacements characterized the community changes in sediment receiving soil inputs. For fungi, despite phylogenetic enrichment was not observed, the fungal ASVs richness was maintained by soil inputs. Comparison of microbial communities revealed ASVs specific to sediment receiving soil inputs, and also ASVs shared with soil and/or runoff. Among these specific ASVs, four bacterial and one fungal ASVs were identified as indicators of coalescence. Our study provides evidences that coalescence involves the mixing of microorganisms and of the environment.