Harnessing Human Placental Membrane-Derived Bioinks: Characterization and Applications in Bioprinting and Vasculogenesis.

Bioprinting applications in the clinical field generate great interest, but developing suitable biomaterial inks for medical settings is a challenge. Placental tissues offer a promising solution due to their abundance, stability, and status as medical waste. They contain basement membrane components, have a clinical history, and support angiogenesis. This study formulates bioinks from two placental tissues, amnion (AM) and chorion (CHO), and compares their unique extracellular matrix (ECM) and growth factor compositions. Rheological properties of the bioinks are evaluated for bioprinting and maturation of human endothelial cells. Both AM and Cho-derived bioinks sustained human endothelial cell viability, proliferation, and maturation, promoting optimal vasculogenesis. These bioinks derived from human sources have significant potential for tissue engineering applications, particularly in supporting vasculogenesis. This research contributes to the advancement of tissue engineering and regenerative medicine, bringing everyone closer to clinically viable bioprinting solutions using placental tissues as valuable biomaterials.

Development of a vascular substitute produced by weaving yarn made from human amniotic membrane.

Because synthetic vascular prostheses perform poorly in small-diameter revascularization, biological vascular substitutes are being developed as an alternative. Although theirin vivoresults are promising, their production involves long, complex, and expensive tissue engineering methods. To overcome these limitations, we propose an innovative approach that combines the human amniotic membrane (HAM), which is a widely available and cost-effective biological raw material, with a rapid and robust textile-inspired assembly strategy. Fetal membranes were collected after cesarean deliveries at term. Once isolated by dissection, HAM sheets were cut into ribbons that could be further processed by twisting into threads. Characterization of the HAM yarns (both ribbons and threads) showed that their physical and mechanical properties could be easily tuned. Since our clinical strategy will be to provide an off-the-shelf allogeneic implant, we studied the effects of decellularization and/or gamma sterilization on the histological, mechanical, and biological properties of HAM ribbons. Gamma irradiation of hydrated HAMs, with or without decellularization, did not interfere with the ability of the matrix to support endothelium formationin vitro. Finally, our HAM-based, woven tissue-engineered vascular grafts (TEVGs) exhibited clinically relevant mechanical properties. Thus, this study demonstrates that human, completely biological, allogeneic, small-diameter TEVGs can be produced from HAM, thereby avoiding costly cell culture and bioreactors.

Long-term results of autologous scaffold-free tissue-engineered vascular graft for hemodialysis access.

BACKGROUND: The growing size of the end stage renal disease (ESRD) population highlights the need for effective dialysis access. Exhausted native vascular access options have led to increased use of catheters and prosthetic shunts, which are both associated with high risks of access failure and infection. Emerging alternatives include tissue-engineered vascular grafts (TEVG). Here we present the endpoint results for 10 ESRD patients with the scaffold-free tissue-engineered vascular access produced from sheets of extracellular matrix produced in vitro by human cells in culture. METHODS: Grafts were implanted as arteriovenous shunts in 10 ESRD patients with a complex history of access failure. Follow-up included ultrasound control of graft morphology and function, dialysis efficiency, access failure, intervention rate, as well as immunohistochemical analysis of graft structure. RESULTS: One patient died of unrelated causes and three shunts failed to become useable access grafts during the 3-month maturation phase. The 12-month primary and secondary patency for the other six shunts was 86%. Survival of six shunts functioning as the vascular access was 22 ± 12 months with longest primary patency of 38.6 months. The dialysis event rate of 3.34 per patient-year decreased significantly with the use of this TEVG to 0.67. CONCLUSIONS: This living autologous tissue-engineered vascular graft seems to be an alternative to synthetic vascular access options, exhibiting advantages of native arteriovenous fistula.

Inter-donor variability of extracellular matrix production in long-term cultures of human fibroblasts.

Several tissue engineering approaches are based on the ability of mesenchymal cells to endogenously synthesize an extracellular matrix (ECM) in vitro, which can be seen as a form of biomaterial. Accordingly, the inter-donor variability of cell-assembled extracellular matrix (CAM) production is a key parameter to understand in order to progress towards clinical applications, especially for autologous strategies. In this study, CAMs were produced, under good manufacturing process conditions, from skin fibroblasts of 21 patients as part of a clinical trial to evaluate a tissue-engineered vascular graft. The inter-donor variability of CAM strength, thickness, hydroxyproline, and glycosaminoglycan was substantial (coefficient of variability of 33%, 19%, 24%, and 19%, respectively), but a significant correlation was observed between all four properties (Pearson r: 0.43 to 0.70; p-value ≤ 0.05). A CAM matrisome analysis, performed by mass spectrometry, revealed the presence of 70 ECM-related proteins. Our study shows that the relative abundance of 16 proteins (15 non-collagenous) correlated with CAM thickness. These proteins also correlated with CAM hydroxyproline content, as well as 21 other proteins that included fibrillar collagens and non-collagenous proteins. However, data demonstrated that only the relative abundance of type I collagen subunit alpha-1 was correlated to CAM strength. This study is the most extensive evaluation of CAM inter-donor variability to date and will help tissue engineers working with this type of biomaterial to design strategies that take into account this variability, especially for autologous tissue manufacturing.

In vitroandin vivocharacterization of a novel tricalcium silicate-based ink for bone regeneration using laser-assisted bioprinting.

Grafts aside, current strategies employed to overcome bone loss still fail to reproduce native tissue physiology. Among the emerging bioprinting strategies, laser-assisted bioprinting (LAB) offers very high resolution, allowing designing micrometric patterns in a contactless manner, providing a reproducible tool to test ink formulation. To this date, no LAB associated ink succeeded to provide a reproduciblead integrumbone regeneration on a murine calvaria critical size defect model. Using the Conformité Européenne (CE) approved BioRoot RCS® as a mineral addition to a collagen-enriched ink compatible with LAB, the present study describes the process of the development of a solidifying tricalcium silicate-based ink as a new bone repair promoting substrates in a LAB model. This ink formulation was mechanically characterized by rheology to adjust it for LAB. Printed aside stromal cells from apical papilla (SCAPs), this ink demonstrated a great cytocompatibility, with significantin vitropositive impact upon cell motility, and an early osteogenic differentiation response in the absence of another stimulus. Results indicated that thein vivoapplication of this new ink formulation to regenerate critical size bone defect tends to promote the formation of bone volume fraction without affecting the vascularization of the neo-formed tissue. The use of LAB techniques with this ink failed to demonstrate a complete bone repair, whether SCAPs were printed or not of at its direct proximity. The relevance of the properties of this specific ink formulation would therefore rely on the quantity appliedin situas a defect filler rather than its cell modulation properties observedin vitro. For the first time, a tricalcium silicate-based printed ink, based on rheological analysis, was characterizedin vitroandin vivo, giving valuable information to reach complete bone regeneration through formulation updates. This LAB-based process could be generalized to normalize the characterization of candidate ink for bone regeneration.

Laser-assisted 3D bioprinting of exocrine pancreas spheroid models for cancer initiation study.

Pancreatic ductal adenocarcinoma (PDAC) is the most common malignancy of the pancreas. It has shown a poor prognosis and a rising incidence in the developed world. Other pathologies associated with this tissue include pancreatitis, a risk condition for pancreatic cancer. The onset of both pancreatitis and pancreatic cancer follows a common pattern: exocrine pancreatic acinar cells undergo a transdifferentiation to duct cells that triggers a 3D restructuration of the pancreatic tissue. However, the exact mechanism underlying this process remains partially undefined. Further understanding the cellular events leading to PDAC could open new avenues in the development of novel therapeutic approaches. Since current 2D cell culture models fail to mimic the tridimensional complexity of the pancreatic tissue, new in vitro models are urgently needed. Here, we generated 3D pancreatic cell spheroid arrays using laser-assisted bioprinting and characterized their phenotypic evolution over time through image analysis and phenotypic characterization. We show that these bioprinted spheroids, composed of both acinar and ductal cells, can replicate the initial stages of PDAC development. This bioprinted miniaturized spheroid-based array model should prove useful for the study of the internal and external factors that contribute to the formation of precursor PDAC lesions and to cancer progression, and may therefore shed light on future PDAC therapy strategies.

Laser-Assisted Bioprinting for Bone Repair.

Bioprinting is a novel technological approach that has the potential to solve unmet questions in the field of tissue engineering. Laser-assisted bioprinting (LAB), due to its unprecedented cell printing resolution and precision, is an attractive tool for the in situ printing of a bone substitute. Here, we describe the protocol for LAB and its use for the in situ bioprinting of mesenchymal stromal cells, associated with collagen and nanohydroxyapatite, in order to favor bone regeneration in a calvaria defect model in mice.

Human textiles: A cell-synthesized yarn as a truly "bio" material for tissue engineering applications.

In the field of tissue engineering, many groups have come to rely on the extracellular matrix produced by cells as the scaffold that provides structure and strength to the engineered tissue. We have previously shown that sheets of Cell-Assembled extracellular Matrix (CAM), which are entirely biological yet robust, can be mass-produced for clinical applications using normal, adult, human fibroblasts. In this article, we demonstrate that CAM yarns can be generated with a range of physical and mechanical properties. We show that this material can be used as a simple suture to close a wound or can be assembled into fully biological, human, tissue-engineered vascular grafts (TEVGs) that have high mechanical strength and are implantable. By combining this truly "bio" material with a textile-based assembly, this original tissue engineering approach is highly versatile and can produce a variety of strong human textiles that can be readily integrated in the body. STATEMENT OF SIGNIFICANCE: Yarn of synthetic biomaterials have been turned into textiles for decades because braiding, knitting and weaving machines can mass-produce medical devices with a wide range of shapes and mechanical properties. Here, we show that robust, completely biological, and human yarn can be produced by normal cells in vitro. This yarn can be used as a simple suture material or to produce the first human textiles. For example, we produced a woven tissue-engineered vascular grafts with burst pressure, suture retention strength and transmural permeability that surpassed clinical requirements. This novel strategy holds the promise of a next generation of medical textiles that will be mechanically strong without any foreign scaffolding, and will have the ability to truly integrate into the host's body.

In situ prevascularization designed by laser-assisted bioprinting: effect on bone regeneration.

Vascularization plays a crucial role in bone formation and regeneration process. Development of a functional vasculature to improve survival and integration of tissue-engineered bone substitutes remains a major challenge. Biofabrication technologies, such as bioprinting, have been introduced as promising alternatives to overcome issues related to lack of prevascularization and poor organization of vascular networks within the bone substitutes. In this context, this study aimed at organizing endothelial cells in situ, in a mouse calvaria bone defect, to generate a prevascularization with a defined architecture, and promote in vivo bone regeneration. Laser-assisted bioprinting (LAB) was used to pattern Red Fluorescent Protein-labeled endothelial cells into a mouse calvaria bone defect of critical size, filled with collagen containing mesenchymal stem cells and vascular endothelial growth factor. LAB technology allowed safe and controlled in vivo printing of different cell patterns. In situ printing of endothelial cells gave rise to organized microvascular networks into bone defects. At two months, vascularization rate (vr) and bone regeneration rate (br) showed statistically significant differences between the 'random seeding' condition and both 'disc' pattern (vr = +203.6%; br = +294.1%) and 'crossed circle' pattern (vr = +355%; br = +602.1%). These results indicate that in vivo LAB is a valuable tool to introduce in situ prevascularization with a defined configuration and promote bone regeneration.

Characterization of a Cell-Assembled extracellular Matrix and the effect of the devitalization process.

We have previously shown that the Cell-Assembled extracellular Matrix (CAM) synthesized by normal, human, skin fibroblasts in vitro can be assembled in a completely biological vascular graft that was successfully tested in the clinic. The goal of this study was to perform a detailed analysis of the composition and the organization of this truly bio-material. In addition, we investigated whether the devitalization process (dehydration) used to store the CAM, and thus, make the material available "off-the-shelf," could negatively affect its organization and mechanical properties. We demonstrated that neither the thickness nor the mechanical strength of CAM sheets were significantly changed by the dehydration/freezing/rehydration cycle. The identification of over 50 extracellular matrix proteins highlighted the complex composition of the CAM. Histology showed intense collagen and glycosaminoglycan staining throughout the CAM sheet. The distribution of collagen I, collagen VI, thrombospondin-1, fibronectin-1, fibrillin-1, biglycan, decorin, lumican and versican showed various patterns that were not affected by the devitalization process. Transmission electron microscopy analysis revealed that the remarkably dense collagen network was oriented in the plane of the sheet and that neither fibril density nor diameter was changed by devitalization. Second harmonic generation microscopy revealed an intricate, multi-scale, native-like collagen fiber orientation. In conclusion, this bio-material displayed many tissue-like properties that could support normal cell-ECM interactions and allow implantation without triggering degradative responses from the host's innate immune system. This is consistent with its success in vivo. In addition, the CAM can be devitalized without affecting its mechanical or unique biological architecture. STATEMENT OF SIGNIFICANCE: The extracellular matrix (ECM) defines biological function and mechanical properties of tissues and organs. A number of promising tissue engineering approaches have used processed ECM from cadaver/animal tissues or cell-assembled ECM in vitro combined with scaffolds. We have shown the clinical potential of a scaffold-free approach based on an entirely biological material produced by human cells in culture without chemical processing. Here, we perform a comprehensive analysis of the properties of what can truly be called a bio-material. We also demonstrate that this material can be stored dried without losing its remarkable biological architecture.

First human use of an allogeneic tissue-engineered vascular graft for hemodialysis access.

An arteriovenous fistula is the current gold standard for chronic hemodialysis access. Tunneled catheters or synthetic grafts have poorer outcomes and much higher risks of infection. This report presents the first clinical use of a completely biological, allogeneic, nonliving, and human tissue-engineered vascular graft. Tissue-engineered vascular grafts built from allogeneic fibroblasts were implanted as shunts in three hemodialysis patients. The tissue-engineered vascular graft was stored for 9 months, without loss of mechanical strength. Implanted grafts showed no signs of degradation or dilation, with time points up to 11 months. Results of panel-reactive antibody and cross-reactivity tests showed no evidence of immune responses.

The evolution of vascular tissue engineering and current state of the art.

Dacron® (polyethylene terephthalate) and Goretex® (expanded polytetrafluoroethylene) vascular grafts have been very successful in replacing obstructed blood vessels of large and medium diameters. However, as diameters decrease below 6 mm, these grafts are clearly outperformed by transposed autologous veins and, particularly, arteries. With approximately 8 million individuals with peripheral arterial disease, over 500,000 patients diagnosed with end-stage renal disease, and over 250,000 patients per year undergoing coronary bypass in the USA alone, there is a critical clinical need for a functional small-diameter conduit [Lloyd-Jones et al., Circulation 2010;121:e46-e215]. Over the last decade, we have witnessed a dramatic paradigm shift in cardiovascular tissue engineering that has driven the field away from biomaterial-focused approaches and towards more biology-driven strategies. In this article, we review the preclinical and clinical efforts in the quest for a tissue-engineered blood vessel that is free of permanent synthetic scaffolds but has the mechanical strength to become a successful arterial graft. Special emphasis is given to the tissue engineering by self-assembly (TESA) approach, which has been the only one to reach clinical trials for applications under arterial pressure.

New biological solutions for hemodialysis access.

Since Scribner described the first prosthetic chronic dialysis shunt in 1961, the surgical techniques and strategies to maintain vascular access have improved dramatically. Today, hundreds of thousands of patients worldwide are treated with some combination of native vein fistula, synthetic vascular graft, or synthetic semipermanent catheter. Despite significantly lower efficacy compared with autologous fistulae, the basic materials used for synthetic shunts and catheters have evolved surprisingly slowly. The disparity between efficacy rates and concomitant maintenance costs has driven a strong campaign to decrease the use of synthetic grafts and catheters in favor of native fistulae. Whether arguing the benefits of Fistula First or "Catheter Last," the fact that clinicians are in need of an alternative to expanded polytetrafluoroethylene (ePTFE) is irrefutable. The poor performance of synthetic materials has a significant economic impact as well. End-stage renal disease (ESRD) accounts for approximately 6% of Medicare's overall budget, despite a prevalence of about 0.17%. Of that, 15%-25% is spent on access maintenance, making hemodialysis access a critical priority for Medicare. This clinical and economic situation has spawned an aggressive effort to improve clinical care strategies to reduce overall cost and complications. While the bulk of this effort has historically focused on developing new synthetic biomaterials, more recently, investigators have developed a variety of cell-based strategies to create tissue-engineered vascular grafts. In this article, we review the evolution of the field of cardiovascular tissue engineering. We also present an update on the Lifeline™ vascular graft, an autologous, biological, and tissue-engineered vascular graft, which was the first tissue-engineered graft to be used clinically in dialysis patients.

Case study: first implantation of a frozen, devitalized tissue-engineered vascular graft for urgent hemodialysis access.

Previously we reported on the mid- to long-term follow-up in the first clinical trial to use a completely autologous tissue-engineered graft in the high pressure circulation. In these early studies, living grafts were built from autologous fibroblasts and endothelial cells obtained from small skin and vein biopsies. The graft was assembled using a technique called tissue-engineering by self-assembly (TESA), where robust conduits were grown without support from exogenous biomaterials or synthetic scaffolding. One limitation with this earlier work was the long lead times required to build the completely autologous vascular graft. Here we report the first implant of a frozen, devitalized, completely autologous Lifeline™ vascular graft. In a departure from previous studies, the entire fibroblast layer, which provides the mechanical backbone of the graft, was air-dried then stored at -80°C until shortly before implant. Five days prior to implant, the devitalized conduit was rehydrated, and its lumen was seeded with living autologous endothelial cells to provide an antithrombogenic lining. The graft was implanted as an arteriovenous shunt between the brachial artery and the axillary vein in a patient who was dependent upon a semipermanent dialysis catheter placed in the femoral vein. Eight weeks postoperatively, the graft functions without complication. This strategy of preemptive skin and vein biopsy and cold-preserving autologous tissue allows the immediate availability of an autologous arteriovenous fistula, and is an important step forward in our strategy to provide allogeneic tissue-engineered grafts available "off-the-shelf".

Expression of versican isoform V3 in the absence of ascorbate improves elastogenesis in engineered vascular constructs.

A promising method to fabricate tissue-engineered blood vessels is to have cells synthesize the supportive extracellular matrix scaffold of the tissue-engineered blood vessel; however, a shortcoming of this method has been limited elastogenesis. Previously, we found that arterial smooth muscle cells (ASMCs) produced significant quantities of elastin when transduced with splice variant 3 of the proteoglycan versican (V3). In this study, we assessed whether elastogenesis and the structural properties of entirely cell-derived engineered vascular constructs could be improved by the incorporation of V3-transduced rat ASMCs. After 18 weeks of culture, V3 constructs had more tropoelastin, more elastin crosslinks, higher burst strengths, greater elasticity, and thicker collagen fiber bundles compared with empty-vector controls. The expression of elastin and elastin-associated proteins was increased in V3 and control ASMC monolayer cultures when ascorbic acid, which promotes collagen synthesis and inhibits elastogenesis, was removed from the medium. Engineered vascular constructs with ascorbate withdrawn for 14 weeks, after an initial 4-week exposure to ascorbate, exhibited increased elastin, desmosine content, elasticity, and burst strength compared with constructs exposed continuously to ascorbate. Our results show that V3 coupled with limited exposure to ascorbate promotes elastogenesis and improves the structural and functional properties of engineered vascular constructs.

Effectiveness of haemodialysis access with an autologous tissue-engineered vascular graft: a multicentre cohort study.

BACKGROUND: Application of a tissue-engineered vascular graft for small-diameter vascular reconstruction has been a long awaited and much anticipated advance for vascular surgery. We report results after a minimum of 6 months of follow-up for the first ten patients implanted with a completely biological and autologous tissue-engineered vascular graft. METHODS: Ten patients with end-stage renal disease who had been receiving haemodialysis through an access graft that had a high probability of failure, and had had at least one previous access failure, were enrolled from centres in Argentina and Poland between September, 2004, and April, 2007. Completely autologous tissue-engineered vascular grafts were grown in culture supplemented with bovine serum, implanted as arteriovenous shunts, and assessed for both mechanical stability during the safety phase (0-3 months) and effectiveness after haemodialysis was started. FINDINGS: Three grafts failed within the safety phase, which is consistent with failure rates expected for this high-risk patient population. One patient was withdrawn from the study because of severe gastrointestinal bleeding shortly before implantation, and another died of unrelated causes during the safety period with a patent graft. The remaining five patients had grafts functioning for haemodialysis 6-20 months after implantation, and a total of 68 patient-months of patency. In these five patients, only one intervention (surgical correction) was needed to maintain secondary patency. Overall, primary patency was maintained in seven (78%) of the remaining nine patients 1 month after implantation and five (60%) of the remaining eight patients 6 months after implantation. INTERPRETATION: Our proportion of primary patency in this high-risk cohort approaches Dialysis Outcomes Quality Initiative objectives (76% of patients 3 months after implantation) for arteriovenous fistulas, averaged across all patient populations.

Mechanical properties of completely autologous human tissue engineered blood vessels compared to human saphenous vein and mammary artery.

We have previously reported the initial clinical feasibility with our small diameter tissue engineered blood vessel (TEBV). Here we present in vitro results of the mechanical properties of the TEBVs of the first 25 patients enrolled in an arterio-venous (A-V) shunt safety trial, and compare these properties with those of risk-matched human vein and artery. TEBV average burst pressures (3490+/-892 mmHg, n=230) were higher than native saphenous vein (SV) (1599+/-877 mmHg, n=7), and not significantly different from native internal mammary artery (IMA) (3196+/-1264 mmHg, n=16). Suture retention strength for the TEBVs (152+/-50 gmf) was also not significantly different than IMA (138+/-50 gmf). Compliance for the TEBVs prior to implantation (3.4+/-1.6%/100 mmHg) was lower than IMA (11.5+/-3.9%/100 mmHg). By 6 months post-implant, the TEBV compliance (8.8+/-4.2%/100 mmHg, n=5) had increased to values comparable to IMA, and showed no evidence of dilation or aneurysm formation. With clinical time points beyond 21 months as an A-V shunt without intervention, the mechanical tests and subsequent lot release criteria reported here would seem appropriate minimum standards for clinical use of tissue engineered vessels.

Cell-based therapeutics from an economic perspective: primed for a commercial success or a research sinkhole?

Despite widespread hype and significant investment through the late 1980s and 1990s, cell-based therapeutics have largely failed from both a clinical and financial perspective. While the early pioneers were able to create clinically efficacious products, small margins coupled with small initial indications made it impossible to produce a reasonable return on the huge initial investments that had been made to support widespread research activities. Even as US FDA clearance opened up larger markets, investor interest waned, and the crown jewels of cell-based therapeutics went bankrupt or were rescued by corporate bailout. Despite the hard lessons learned from these pioneering companies, many of today's regenerative medicine companies are supporting nearly identical strategies. It remains to be seen whether or not our proposed tenets for investment and commercialization strategy yield an economic success or whether the original model can produce a return on investment sufficient to justify the large up-front investments. Irrespective of which approach yields a success, it is critically important that more of the second-generation products establish profitability if the field is to enjoy continued investment from both public and private sectors.

Technology insight: the evolution of tissue-engineered vascular grafts--from research to clinical practice.

There is a considerable clinical need for alternatives to the autologous vein and artery tissues used for vascular reconstructive surgeries such as CABG, lower limb bypass, arteriovenous shunts and repair of congenital defects to the pulmonary outflow tract. So far, synthetic materials have not matched the efficacy of native tissues, particularly in small diameter applications. The development of cardiovascular tissue engineering introduced the possibility of a living, biological graft that might mimic the functional properties of native vessels. While academic research in the field of tissue engineering in general has been active, as yet there has been no clear example of clinical and commercial success. The recent transition of cell-based therapies from experimental to clinical use has, however, reinvigorated the field of cardiovascular tissue engineering. Here, we discuss the most promising approaches specific to tissue-engineered blood vessels and briefly introduce our recent clinical results. The unique regulatory, reimbursement and production challenges facing personalized medicine are also discussed.