Bacterial adhesion to composite resins produced by additive and subtractive manufacturing.

The aim of this study was to evaluate the surface roughness and contact angle of composite resins produced by CAD/CAM milling and three-dimensional (3D) printing for permanent restorations as well as the adhesion of S. mutans and S. sanguinis bacteria to these composites. Three CAD/CAM milling composite resins (Vita Enamic-VE, Cerasmart-CE, Lava Ultimate-LU) and three 3D printing resins (Varseo Smile Crown plus-VSC, Saremco print Crowntech-SPC, Formlabs 3B Permanent crown-FLP) were selected. Twenty samples were prepared for each group. Using a contact profilometer, the surface roughness was determined, and an optical goniometer was used to quantify the contact angle. To evaluate the bacterial adhesion, composite specimens were immersed in mucin containing artificial saliva. All samples were incubated for 24 h at 37°C in 5% CO2. CFUs were determined by counting colonies after the incubation period. Surface roughness values of test samples were the highest in the Group VSC [0.46 (0.14) µm], whereas the lowest values were found in the Group LU [0.23 (0.05) µm]. There was no statistically significant difference between the groups in contact angle values (p > 0.05). The S. mutans adhesion extent on the Group SPC was statistically higher compared to all other materials with p < 0.05. For S. sanguinis, the lowest bacterial adhesion value was recorded in Group CE (3.00 × 104 CFU/ml) and statistically significant differences were found with Group VE and VSC (p < 0.05). Different digital manufacturing techniques and material compositions can affect the surface roughnesses of composite resins. All composite resin samples have hydrophobic characteristics. Microbial adhesion of the tested composite resins may be varied depending on the bacterial species. S. mutans showed much more adhesion to these materials than S. sanguinis.

The Emergence of Echinocandin-Resistant Candida glabrata Exhibiting High MICs and Related FKS Mutations in Turkey.

The frequency of invasive fungal infections shows a rising trend as well as a high morbidity and mortality. Among the causative agents, a shift toward the non-albicans Candida species including Candida glabrata species complex is being observed in several centers. Echinocandin resistance is increasingly published; however, isolates presenting with an in vitro resistance have not yet been reported from Turkey. We, herein, report the first FKS mutant and phenotypically echinocandin-resistant C. glabrata clinical strains from a single center in Turkey. In a 43-year-old female patient, several enterocutaneous fistulae developed after a long term hospitalization period and several complicated surgeries. She eventually required parenteral nutrition via a tunneled central venous catheter (CVC). Following a number of bacteremic and fungemic episodes as well as intensive antimicrobial interventions (including fluconazole, caspofungin and anidulafungin), a CVC-related candidemia caused by C. glabrata was detected. The isolated strain yielded high minimum inhibitory concentration (MIC) values for echinocandins and was categorized as resistant. A resistance-related mutation was detected in FKS2 HS1 (D666V). Blood cultures remained negative after the removal of the CVC and treatment with caspofungin and high-dose fluconazole. Following this first case, two additional C. glabrata strains with high echinocandin MICs were isolated from the urine cultures of two unrelated patients from different wards with different mutations in FKS2 HS1 (S663P and delF659). Our findings indicate that routine antifungal susceptibility testing is crucial and underlines the need for attention for the increasing trend of acquired echinocandin resistance in C. glabrata.

[Changing Trends in Isolation Frequencies and Species of Clinical Fungal Strains: What Do the 12-years (2008-2019) Mycology Laboratory Data Tell About?] / Enfeksiyon Etkeni Mantarlarin Zamana Göre Siklik ve Tür Dagilimlarindaki Degisimler: 12 Yillik (2008-2019) Mikoloji Laboratuvari Verileri Ne Söylüyor?

The frequency and variety of infections caused by fungi are increasing. However, changes and intercenter and regional differences are observed in the distribution of fungal species over the years. It is important to update the epidemiological data in order to enable early and appropriate treatment. In this retrospective study, the number of fungi isolated from clinical samples, their distribution at the genus/ species level and the variations over the years in Hacettepe University hospital which is a regional center for patients at risk of fungal infection were investigated. For this purpose, laboratory records from 2008- 2019 were examined and 21813 fungal strains isolated from 19636 clinical samples were detected. When the first (2008-2013) and second (2014-2019) six-year periods were compared, a 2.5 fold increase was observed in the number of specimens yielding fungal growth (first period; n= 5620, second period; n= 14016). Fungi were most frequently isolated from urine (45.0%), lower respiratory tract (30.7%) and blood (6.8%) samples. Mould isolation rate in all samples increased significantly in the second six-year period (from 8.3% to 10.6%, p≤ 0.001). As expected, the most frequent yeast was Candida albicans (57.0%) and mould was Aspergillus fumigatus complex (50.4%). In the second six-year period, isolation of C.albicans (59.3% to 56.0%, p≤ 0.001) among yeasts and A.fumigatus complex (58.1% to 48.0%, p≤ 0.001) among moulds decreased significantly. In urine specimens, most common fungi were C.albicans (49.8%), Candida glabrata complex (15.6%), Candida tropicalis (8.9%) and Candida kefyr (7.5%). In lower respiratory tract specimens, the most common mould was A.fumigatus complex (51.2%), which has decreased from 63.7% in the first six years to 47.1% in the second period (p≤ 0.001). Over the same period, other Aspergillus species (from 25.5% to 34.1%, p= 0.002) and non-Aspergillus moulds (from 36.3% to 52.9%, p≤ 0.001) were increased. In blood samples, C.albicans (44.4%), Candida parapsilosis complex (21.5%) and C.glabrata complex (13.0%) were the most frequent species. In the second six-year period, the frequency of C.albicans decreased from 47.3% to 42.2% (p= 0.059) and the frequency of C.glabrata complex increased from 9.5% to 15.5% (p≤ 0.001) when compared to the first period. For the sterile specimens other than blood, the most common species were C.albicans (37.8%), C.glabrata complex (9.1%) and C.parapsilosis complex (4.7%). However, the number of fungal isolates and the distribution of the species showed great variation over the years. In our center, a substantial increase in the number of fungal strains isolated from the clinical specimens were observed over a 12-years period. In addition and similar to previously published reports, the increase of strains belonging to species with decreased antifungal susceptibility and/or species with unknown susceptibility were detected. The use of local data is required in order to implement early and appropriate antifungal treatment because of inter-center and regional differences observed in epidemiological trends regarding the distributions of fungal genera and species. Surveillance studies to be conducted with the participation of large and sufficient numbers of centers in our country, as we have done for our center, will also contribute to approaches regarding the management of fungal infections by revealing the epidemiological data in a comprehensive manner.

[Rapid detection of extended-spectrum beta-lactamases by flow cytometry method]. / Genislemis spektrumlu beta-laktamazlarin akim sitometrisi yöntemiyle hizli tespiti.

Extended-spectrum beta-lactamases (ESBL), produced by Enterobacteriaceae members are enzymes that especially cause a resistance to cephalosporin group antibiotics commonly used in clinics. Early and rapid detection of ESBL production is crucial for antimicrobial treatment and infection control; however the methods used for this purpose are time consuming (24 to 48 hours). The aim of this study was to determine a flow cytometry based-test which provides to detect ESBL producing bacteria in a short time. A total of 38 ESBL-producing (29 Escherichia coli, 9 Klebsiella pneumoniae) and 10 non-producing (5 E.coli, 5 K.pneumoniae) Enterobacteriaceae strains isolated between 2012 and 2013 were included in this study. The identification and antibiotic susceptibility tests of the isolates were performed by using Phoenix(TM) 100 automated system (Becton Dickinson, USA). The presence of bla(TEM), bla(SHV), bla(CTX-M1), bla(CTX-M2) and bla(CTX-M9) genes were investigated in ESBL positive isolates via polymerase chain reaction method. At least one of the ESBL genes were detected in 36 out of 38 isolates and no genes were detected in two E.coli isolates. In flow cytometric method, the percentages of death cells exposed to cephalosporin [(ceftazidime (CAZ) or cefotaxime (CTX)] and clavulanic acid (CLA) combination, were compared with death cells exposed only to cephalosporin (CAZ or CTX). CLA index values (CAZ-CLA and CTX-CLA indices) were obtained for CTX and CAZ. Index values which was higher than 1.5 just for one cephalosporin were accepted as GSBL positive. The mean index values for CTX-CLA in ESBL positive strains according to their genotypic characteristics were between 1.14 and 7.22, while those values for CAZ-CLA were between 0.85 and 5.6. When the two groups of 38 ESBL positive and 10 ESBL negative strains were evaluated, statistically significant difference was detected for both CAZ-CLA and CTX-CLA indices (p< 0.005). CTX-CLA indices (p= 0.001) shown a better determination of ESBL when CAZ-CLA and CTX-CLA indices were compared statistically. In conclusion, flow cytometry is a rapid and reliable method for the detection of ESBL in clinical microbiology laboratories when compared with the other methods.

Effect of 2 elastomeric ligatures on microbial flora and periodontal status in orthodontic patients.

INTRODUCTION: The aim of this study was to compare the effects of a nonconventional elastomeric ligature (Slide; Leone, Florence, Italy) with those of a conventional elastomeric ligature (Ormco, Orange, Calif) on microbial flora and periodontal status in orthodontic patients. METHODS: A total of 13 orthodontic patients scheduled for fixed orthodontic treatment were selected for this study. The use of Slide and conventional elastomeric ligatures in fixed orthodontic appliances was tested. Microbial and periodontal records were obtained before bonding and 1 and 5 weeks after bonding. For the statistical analysis and calculations, SPSS software (version 15.0; SPSS, Chicago, Ill) was used. In the statistical decisions, P <0.05 values were accepted as significantly different. RESULTS: No significant differences between Slide and conventional elastomeric ligatures were evident at 1 week or 5 weeks after bonding, with regard to gingival index, plaque index, gingival bleeding index, or pocket depth scores (P >0.05). Similarly, aerobic and anaerobic bacteria counts did not differ significantly on the surface or on the elastics (P >0.05). CONCLUSIONS: Although the Slide ligatures cover the total surface of the bracket, they do not cause significantly more plaque accumulation or periodontal problems than do the conventional elastomeric ligatures.

Two bacteremia cases associated with Rothia mucilaginosa.

We here report two cases of blood stream infection due to Rothia mucilaginosa. The isolates were identified as R. mucilaginosa using a VITEK 2 automated sytem and a MALDI-TOF MS system. Then, 16S rRNA gene sequencing was performed for the confirmation of the isolates. This is the first documented report of bacteremia due to this unusual agent in Turkey.