RESUMEN
Demand for gender-affirming facial surgery is growing rapidly. Frontal sinus setback, one of the key procedures used in gender-affirming facial surgery, has a particularly high impact on gender perception. Mixed reality (MR) allows a user to view and virtually overlay three-dimensional imaging on the patient and interact with it in real time. We used the Medivis's SurgicalAR system in conjunction with the Microsoft HoloLens Lucille2 (Microsoft). Computed tomography imaging was uploaded to SurgicalAR, and a three-dimensional (3D) hologram was projected onto the display of the HoloLens. The hologram was registered and matched to the patient, allowing the surgeon to view bony anatomy and underlying structures in real time on the patient. The surgeon was able to outline the patient's frontal sinuses using the hologram as guidance. A 3D printed cutting guide was used for comparison. Negligible difference between the mixed reality-based outline and 3D-printed outline was seen. The process of loading the hologram and marking the frontal sinus outline lasted less than 10 minutes. The workflow and usage described here demonstrate significant promise for the use of mixed reality as imaging and surgical guidance technology in gender-affirming facial surgery.
RESUMEN
Pediatric craniofacial fractures are fundamentally distinct from their adult counterparts because of unique injury patterns and effects on future growth. Understanding patterns and injury context informs management and risk mitigation. Previous studies include only inpatients, operative patients, or are specialty-specific. In contrast, our study presents a comprehensive assessment of all pediatric facial fracture patients seen at a single institution. Patients under 18 years old who were evaluated for facial fractures at a level I pediatric trauma center between 2006 and 2021 were reviewed. Subanalysis was performed for groups defined by age. Variables studied included demographics, etiology, fracture pattern, associated injuries, management, and outcomes. Three thousand thirty-four patients were included. Mean age at presentation was 11.5 to 4.9 years. The majority were Caucasian (82.6%) and male (68.4%). Sports were the leading cause of injury in older patients (42.2% of patients over 12 y), compared with activities of daily living in patients under 6 years (45.5%). Thirty-two percent of patients were hospitalized, 6.0% required ICU care, and 48.4% required surgery. Frequency of ICU admission decreased with age (P<0.001), whereas operative intervention increased with age (P<0.001). Zygomaticomaxillary complex (P=0.002) and nasal fractures (P<0.001) were common in older patients, whereas younger patients experienced more skull (P<0.001) and orbital fractures (P<0.001). The most associated injuries were soft tissue (55.7%) and neurologic (23.6%). This large-scale study provides updated characterization of craniofacial fractures in the pediatric population, providing a necessary framework for future studies on outcomes assessments and preventative care.
RESUMEN
OBJECTIVE: The purpose of this study is to objectively quantify the degree of overcorrection in our current practice and to evaluate longitudinal morphological changes using CranioRateTM, a novel machine learning skull morphology assessment tool. â¯. DESIGN: Retrospective cohort study across multiple time points. SETTING: Tertiary care children's hospital. PATIENTS: Patients with preoperative and postoperative CT scans who underwent fronto-orbital advancement (FOA) for metopic craniosynostosis. MAIN OUTCOME MEASURES: We evaluated preoperative, postoperative, and two-year follow-up skull morphology using CranioRateTM to generate a Metopic Severity Score (MSS), a measure of degree of metopic dysmorphology, and Cranial Morphology Deviation (CMD) score, a measure of deviation from normal skull morphology. RESULTS: Fifty-five patients were included, average age at surgery was 1.3 years. Sixteen patients underwent follow-up CT imaging at an average of 3.1 years. Preoperative MSS was 6.3 ± 2.5 (CMD 199.0 ± 39.1), immediate postoperative MSS was -2.0 ± 1.9 (CMD 208.0 ± 27.1), and longitudinal MSS was 1.3 ± 1.1 (CMD 179.8 ± 28.1). MSS approached normal at two-year follow-up (defined as MSS = 0). There was a significant relationship between preoperative MSS and follow-up MSS (R2 = 0.70). CONCLUSIONS: MSS quantifies overcorrection and normalization of head shape, as patients with negative values were less "metopic" than normal postoperatively and approached 0 at 2-year follow-up. CMD worsened postoperatively due to postoperative bony changes associated with surgical displacements following FOA. All patients had similar postoperative metopic dysmorphology, with no significant association with preoperative severity. More severe patients had worse longitudinal dysmorphology, reinforcing that regression to the metopic shape is a postoperative risk which increases with preoperative severity.
RESUMEN
INTRODUCTION: In children with PRS, MDO is routinely performed to alleviate airway obstruction; however, it involves risk of injury to the MMN. We hypothesize that MMN palsy incidence following MDO, reported at 1-15%, is underestimated. This study investigates the true incidence of MMN palsy after MDO to better guide follow-up care and improve treatment of this complication. METHODS: A retrospective review of PRS patients who underwent MDO at a single, tertiary pediatric hospital between September 2007 and March 2021 was conducted. Patients who underwent MDO under one year of age and had postoperative clinical evaluations detailing MMN function were included. Logistic regression analysis was performed to investigate predictors of MMN injury. RESULTS: Of 93 patients who underwent MDO, 59.1% met inclusion criteria. 56.4% were female, 43.6% were syndromic, and average age at MDO was 1.52 ± 2.04 months. The average length of mandibular distraction was 17.3 ± 4.36mm, average duration of intubation was 6.57 ± 2.37 days, and average time until hardware removal was 111.1 ± 23.6 days. Sixteen patients (29.1%) presented with permanent MMN dysfunction, comprised of 8 patients with bilateral weakness and 8 with unilateral weakness. An additional five patients (9.1%) presented with transient MMN weakness that resolved within a year. Average length of follow-up postoperatively was 6.02 years, and no significant predictors of nerve injury were found. CONCLUSION: In this 14-year review of patients with PRS who underwent MDO, 38.2% demonstrated evidence of MMN palsy (29.1% permanent, 9.1% transient), which is much greater than previously described.
RESUMEN
BACKGROUND: Detailed in-house databases are a staple of surgical research and a crucial source of data for many studies from which clinical guidelines are built. Despite the importance of generating a clear and thorough developmental design, the literature on database creation and management is limited. In this article, the authors present their stepwise single-institution process of developing a clinical facial fracture database. METHODS: The authors outline the process of development of a large single-institution clinical pediatric facial fracture database. The authors highlight critical steps from conception, regulatory approval, data safety/integrity, human resource allocation, data collection, quality assurance, and error remediation. The authors recorded patient characteristics, comorbidities, details of the sustained fracture, associated injuries, hospitalization information, treatments, outcomes, and follow-up information on Research Electronic Data Capture. Protocols were created to ensure data quality assurance and control. Error identification analysis was subsequently performed on the database to evaluate the completeness and accuracy of the data. RESULTS: A total of 4451 records from 3334 patients between 2006 and 2021 were identified and evaluated to generate a clinical database. Overall, there were 259 incorrect entries of 120,177 total entries, yielding a 99.8% completion rate and a 0.216% error rate. CONCLUSIONS: The quality of clinical research is intrinsically linked to the quality and accuracy of the data collection. Close attention must be paid to quality control at every stage of a database setup. More studies outlining the process of database design are needed to promote transparent, accurate, and replicable research practices.
Asunto(s)
Procedimientos de Cirugía Plástica , Cirugía Plástica , Humanos , Niño , Recolección de Datos , Hospitalización , Exactitud de los DatosRESUMEN
BACKGROUND: Nasoorbitoethmoid (NOE) fractures impact growth of the craniofacial skeleton in children, which may necessitate differentiated management from adult injuries. This study describes characteristics, management, and outcomes of NOE fractures in children seen at a single institution. METHODS: A retrospective review of patients under 18 years who presented to our institution from 2006 to 2021 with facial fractures was conducted; patients with NOE fractures were included. Data collected included demographics, mechanism of injury, fracture type, management, and outcomes. RESULTS: Fifty-eight patients met inclusion criteria; 77.6% presented with Manson-Marcowitz Type I fractures, 17.2% with Type II, and 5.2% with Type III. The most common cause of injury was motor vehicle accidents (MVAs, 39.7%) and sports (31%). Glasgow Coma Scale and injury mechanism were not predictive of injury severity in the pediatric population ( P =0.353, P =0.493). Orbital fractures were the most common associated fractures (n=55, 94.8%); parietal bone fractures were more likely in Type III fractures ( P =0.047). LeFort III fractures were more likely in type II fractures ( P =0.011). Soft tissue and neurological injuries were the most common associated injuries regardless of NOE fracture type (81% and 58.6%, respectively). There was no significant difference in type of operative management or in the rates of adverse outcomes between types of NOE fractures. CONCLUSIONS: These findings suggest that pediatric NOE fractures, although rare, present differently from adult NOE fractures and that revisiting predictive heuristics and treatment strategies is warranted in this population.
Asunto(s)
Fracturas Múltiples , Fracturas Maxilares , Fracturas Orbitales , Fracturas Craneales , Niño , Humanos , Adolescente , Fracturas Craneales/epidemiología , Fracturas Craneales/cirugía , Fracturas Orbitales/epidemiología , Fracturas Orbitales/cirugía , Fracturas Orbitales/complicaciones , Fijación de Fractura/efectos adversos , Hueso Nasal/lesiones , Estudios Retrospectivos , Fracturas Múltiples/complicacionesRESUMEN
BACKGROUND: Quantifying the severity of head shape deformity and establishing a threshold for operative intervention remains challenging in patients with metopic craniosynostosis (MCS). This study combines three-dimensional skull shape analysis with an unsupervised machine-learning algorithm to generate a quantitative shape severity score (cranial morphology deviation) and provide an operative threshold score. METHODS: Head computed tomography scans from subjects with MCS and normal controls (5 to 15 months of age) were used for objective three-dimensional shape analysis using ShapeWorks software and in a survey for craniofacial surgeons to rate head-shape deformity and report whether they would offer surgical correction based on head shape alone. An unsupervised machine-learning algorithm was developed to quantify the degree of shape abnormality of MCS skulls compared to controls. RESULTS: One hundred twenty-four computed tomography scans were used to develop the model; 50 (24% MCS, 76% controls) were rated by 36 craniofacial surgeons, with an average of 20.8 ratings per skull. The interrater reliability was high (intraclass correlation coefficient, 0.988). The algorithm performed accurately and correlates closely with the surgeons assigned severity ratings (Spearman correlation coefficient, r = 0.817). The median cranial morphology deviation for affected skulls was 155.0 (interquartile range, 136.4 to 194.6; maximum, 231.3). Skulls with ratings of 150.2 or higher were very likely to be offered surgery by the experts in this study. CONCLUSIONS: This study describes a novel metric to quantify the head shape deformity associated with MCS and contextualizes the results using clinical assessments of head shapes by craniofacial experts. This metric may be useful in supporting clinical decision making around operative intervention and in describing outcomes and comparing patient population across centers.
Asunto(s)
Craneosinostosis , Aprendizaje Automático no Supervisado , Humanos , Lactante , Reproducibilidad de los Resultados , Craneosinostosis/diagnóstico por imagen , Craneosinostosis/cirugía , Cráneo/diagnóstico por imagen , Cráneo/cirugíaRESUMEN
INTRODUCTION: The concept of "overcorrection" for trigonocephaly has been reported to achieve both anterior cranial fossa expansion and normalization of craniofacial form. The purpose of this study is to describe in detail a standardized technique to fronto-orbital advancement utilizing the concept of "overcorrection" and objectively evaluate intermediate results. METHODS: This retrospective study included patients with isolated metopic synostosis who underwent surgery via the proposed surgical technique and age and sex-matched unaffected controls. Craniofacial morphometric analysis was performed on pre-, immediate post-, and intermediate postoperative (>2 years) three-dimensional (3D)-rendered computed tomographic (CT) scans and photographs. Key CT-based measurements included interzygomaticofrontal suture distance (IZFS), endocranial bifrontal angle (ECA), and temporal expansion. 3D photogrammetry was performed using established measurements and associated Z-scores converted. A Paired t-test and analysis of variance were performed when appropriate. RESULTS: Forty-one patients were included. A comparison of pre- and immediate postoperative CT scans demonstrated statistically significant increases in all measurements. Subset analysis of 12 patients with intermediate follow-up (age: 39.6 ± 3.6 months) demonstrated significant differences from preoperative values except for IZFS, which decreased from immediate postoperative values and was smaller than age- and sex-matched controls. 3D photogrammetry demonstrated a mean Z-score above the norm for frontal breath. 3D photogrammetry is also positively correlated with CT-based measurements. CONCLUSIONS: This standardized "overcorrection" approach for trigonocephaly can provide the appropriate changes to maintain a normal ECA despite a reduction in bifrontal width over time. 3D photogrammetry positively correlated with CT-based measurements and may provide useful information when following patients clinically. Long-term follow-up assessment to determine the necessary degree of overcorrection at skeletal mature is needed.
Asunto(s)
Craneosinostosis , Imagenología Tridimensional , Procedimientos de Cirugía Plástica , Preescolar , Humanos , Craneosinostosis/diagnóstico por imagen , Craneosinostosis/cirugía , Estudios Retrospectivos , Tomografía Computarizada por Rayos X/métodosRESUMEN
ABSTRACT: Correction (and over-correction) of asymmetries of the orbital shape and brow position in unilateral coronal craniosynostosis (UCS) is critical to successful fronto-orbital advancement. Here we quantify and three-dimensionally assess fronto-orbital irregularities in UCS patients compared to controls.Twenty-three patients with UCS evaluated at the Children's Hospital of Pittsburgh between 2006 and 2016 were age and gender-matched to controls. Computed tomography scans were reconstructed and evaluated for orbital metrics. A three-dimensional heat map of orbital regions was generated and evaluated for shape differences.Brow protrusion of the orbit ipsilateral to the synostotic suture did not differ significantly from healthy controls. Orbital height was significantly increased while orbital width was decreased on the UCS ipsilateral side compared to the contralateral side and controls. The ipsilateral cornea was overprojected relative to the brow and the infraorbital rim, but similar to controls relative to the lateral rim. The contralateral orbit had increased brow protrusion with decreased orbital height. The cornea was underprojected relative to the brow, but overprojected relative to the lateral orbital rim and similar to controls at the infraorbital rim. Three-dimensional comparison demonstrated significant overprojection of the contralateral brow, with some more mild and inconsistent underprojection of the lateral aspect of the ipsilateral brow.Key orbital and brow differences exist between the affected and unaffected sides in UCS. This study provides quantitative data that further characterize the orbital dysmorphology observed in UCS and identifies unique aspects of the diagnosis that should be taken into consideration during surgical planning.
Asunto(s)
Craneosinostosis , Niño , Craneosinostosis/diagnóstico por imagen , Cara , Humanos , Lactante , Órbita/diagnóstico por imagen , Estudios Retrospectivos , Tomografía Computarizada por Rayos XRESUMEN
ABSTRACT: Bilateral lambdoid and sagittal synostosis, or Mercedes Benz Syndrome, is a rare complex craniosynostosis resulting in frontal bossing, a tapered posterior fossa, and an anteriorly displaced cranial vertex. Its ideal surgical correction must result in posterior expansion, skull elongation, and caudal repositioning of the vertex. We present a craniometric analysis of skull changes with posterior-superior distraction and introduce a novel craniometric measure: vertex position. In this study, a retrospective review was performed to analyze outcomes of posterior cranial vault distraction osteogenesis (PVDO) using a posterior-superior distraction vector from 2016 to 2019. Cranial vertex position was measured as a fraction of the occipitofrontal diameter from rostral to caudal (0-1.0). Four patients underwent PVDO at mean age 10.61â±â3.16âmonths utilizing a posterior-superior distraction vector. Linear distraction distance averaged 30.30â±â0.90âmm with a mean consolidation period of 3.98â±â0.72âmonths. Mean corrected change in intra-cranial volume was 236.30â±â3.71âmL, at an average rate of 7.81â±â2.00âmL/mm of distraction. Increases in anterior cranial height (7.83â±â2.51âmm), middle cranial height (8.43â±â4.21âmm), posterior cranial height (13.15â±â7.45âmm), and posterior cranial fossa height (21.99â±â8.55âmm) were observed. Cranial vertex demonstrated a mean posterior movement of 0.18â±â0.13. PVDO utilizing a posterior-superior distraction vector for management of nonsyndromic bilateral lambdoid and sagittal synostosis effectively increases intracranial volume and height and provides an esthetic outcome with posterior movement of the cranial vertex.
Asunto(s)
Craneosinostosis , Osteogénesis por Distracción , Craneosinostosis/cirugía , Estética Dental , Humanos , Lactante , Estudios Retrospectivos , Cráneo , Tomografía Computarizada por Rayos XRESUMEN
ABSTRACT: Primary pancraniosynostosis is a rare variant of craniosynostosis in which the major cranial sutures prematurely fuse. Single-suture craniosynostosis is often recognized early in life due to an abnormal head shape. In contrast, primary pancraniosynostosis may be diagnosed later in life due to a grossly normal head shape and size. As such, these children can present with symptoms related to chronically elevated intracranial pressure (eg, vision loss or cognitive impairment). This report highlights a patient with primary pancraniosynostosis associated with unique neurologic sequelae-namely, bilateral abducens nerve palsy. A 9-year-old boy presented to the ophthalmologist with a 1-month history of double vision, drifting of his right eye toward the nasal bridge, and intracranial hypertension evident with papilledema. Physical examination was notable for mild bitemporal narrowing. A computed tomography study demonstrated radiologic thumbprinting, diffuse osseous sclerosis, and fusion of the bilateral coronal, sagittal, metopic, and lambdoid sutures. The patient underwent emergent cranial vault expansion with fronto-orbital advancement. Papilledema had resolved 4 months following surgery. At 2-year follow-up, abducens nerve palsy and head shape were significantly improved. This study brings attention to an unreported presenting symptom of pancraniosynostosis (bilateral abducens nerve palsy). This information may lead to quicker diagnosis and treatment of pancraniosynostosis-induced intracranial hypertension, which is critical to prevent long-term sequelae.
Asunto(s)
Enfermedades del Nervio Abducens , Craneosinostosis , Hipertensión Intracraneal , Enfermedades del Nervio Abducens/diagnóstico , Enfermedades del Nervio Abducens/etiología , Niño , Suturas Craneales , Craneosinostosis/diagnóstico por imagen , Craneosinostosis/cirugía , Humanos , Masculino , CráneoRESUMEN
We present a novel application of endocranial burr contouring for cranial vault expansion as a surgical adjunct during decompressive craniectomy in patients with cranial osteosclerosis. A 16-year-old female with osteosclerotic Robinow syndrome complicated by slit ventricle syndrome presented with refractory intracranial hypertension following external ventricular drain placement. Symptoms included severe headaches and altered mental status. Given the severe intracranial volume restriction secondary to massive calvarial thickening (2.5 cm), the patient was taken to the operating room for urgent surgical decompression. After frontal and parietal craniectomy, burr and osteotome contouring were used to remove two-thirds of the endocranial calvarial bone flap thickness resulting in a 9% cranial vault expansion while preserving an overall normal head size. There were no immediate postoperative complications. At over 3 years postoperatively, the patient had reduced headaches, maintained adequate shunt function, and has not required further vault reconstruction.
Asunto(s)
Osteosclerosis , Cráneo , Adolescente , Anomalías Craneofaciales , Craneotomía , Enanismo , Femenino , Humanos , Deformidades Congénitas de las Extremidades , Complicaciones Posoperatorias/cirugía , Estudios Retrospectivos , Cráneo/diagnóstico por imagen , Cráneo/cirugía , Resultado del Tratamiento , Anomalías UrogenitalesRESUMEN
STUDY OBJECTIVE: Throughout the coronavirus disease 2019 pandemic, many emergency departments have been using passive protective enclosures ("intubation boxes") during intubation. The effectiveness of these enclosures remains uncertain. We sought to quantify their ability to contain aerosols using industry standard test protocols. METHODS: We tested a commercially available passive protective enclosure representing the most common design and compared this with a modified enclosure that incorporated a vacuum system for active air filtration during simulated intubations and negative-pressure isolation. We evaluated the enclosures by using the same 3 tests air filtration experts use to certify class I biosafety cabinets: visual smoke pattern analysis using neutrally buoyant smoke, aerosol leak testing using a test aerosol that mimics the size of virus-containing particulates, and air velocity measurements. RESULTS: Qualitative evaluation revealed smoke escaping from all passive enclosure openings. Aerosol leak testing demonstrated elevated particle concentrations outside the enclosure during simulated intubations. In contrast, vacuum-filter-equipped enclosures fully contained the visible smoke and test aerosol to standards consistent with class I biosafety cabinet certification. CONCLUSION: Passive enclosures for intubation failed to contain aerosols, but the addition of a vacuum and active air filtration reduced aerosol spread during simulated intubation and patient isolation.
Asunto(s)
COVID-19/prevención & control , Control de Infecciones/instrumentación , Intubación Intratraqueal/instrumentación , Neumonía Viral/prevención & control , Aerosoles , COVID-19/transmisión , Infección Hospitalaria/prevención & control , Diseño de Equipo , Filtración/instrumentación , Humanos , Transmisión de Enfermedad Infecciosa de Paciente a Profesional/prevención & control , Maniquíes , Pandemias , Neumonía Viral/transmisión , Neumonía Viral/virología , SARS-CoV-2 , VacioRESUMEN
BACKGROUND: Orbital blowout fracture reconstruction often requires an implant, which must be shaped at the time of surgical intervention. This process is time-consuming and requires multiple placement trials, possibly risking complications. Three-dimensional printing technology has enabled health care facilities to generate custom anatomical models to which implants can be molded to precisely match orbital anatomy. The authors present their early experience with these models and their use in optimizing orbital fracture fixation. METHODS: Maxillofacial computed tomographic scans from patients with orbital floor or wall fractures were prospectively obtained and digitally reconstructed. Both injured-side and mirrored unaffected-side models were produced in-house by stereolithography printing technique. Models were used as templates for molding titanium reconstruction plates, and plates were implanted to reconstruct the patients' orbital walls. RESULTS: Nine patients (mean age, 15.5 years) were included. Enophthalmos was present in seven patients preoperatively and resolved in six patients with surgery. All patients had excellent conformation of the implant to the fracture site on postoperative computed tomographic scan. Postoperative fracture-side orbital volumes were significantly less than preoperative, and not significantly different from unfractured-side orbital volumes. Total model preparation time was approximately 10 hours. Materials cost was at most $21. Plate bending time was approximately 60 seconds. CONCLUSIONS: Patient-specific orbital models can speed the shaping of orbital reconstruction implants and potentially improve surgical correction of orbital fractures. Production of these models with consumer-grade technology confers the same advantages as commercial production at a fraction of the cost and time. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, IV.
Asunto(s)
Modelos Anatómicos , Fracturas Orbitales/cirugía , Planificación de Atención al Paciente , Procedimientos de Cirugía Plástica/instrumentación , Impresión Tridimensional/economía , Adolescente , Niño , Femenino , Estudios de Seguimiento , Humanos , Imagenología Tridimensional/economía , Masculino , Órbita/anatomía & histología , Órbita/diagnóstico por imagen , Órbita/lesiones , Órbita/cirugía , Diseño de Prótesis/economía , Diseño de Prótesis/métodos , Tomografía Computarizada por Rayos X/economía , Resultado del TratamientoAsunto(s)
Procedimientos de Cirugía Plástica , Mallas Quirúrgicas , Matriz Ósea , Niño , Humanos , Prótesis e Implantes , Cráneo/cirugíaRESUMEN
The standard for diagnosing metopic craniosynostosis (CS) utilizes computed tomography (CT) imaging and physical exam, but there is no standardized method for determining disease severity. Previous studies using interfrontal angles have evaluated differences in specific skull landmarks; however, these measurements are difficult to readily ascertain in clinical practice and fail to assess the complete skull contour. This pilot project employs machine learning algorithms to combine statistical shape information with expert ratings to generate a novel objective method of measuring the severity of metopic CS.Expert ratings of normal and metopic skull CT images were collected. Skull-shape analysis was conducted using ShapeWorks software. Machine-learning was used to combine the expert ratings with our shape analysis model to predict the severity of metopic CS using CT images. Our model was then compared to the gold standard using interfrontal angles.Seventeen metopic skull CT images of patients 5 to 15 months old were assigned a severity by 18 craniofacial surgeons, and 65 nonaffected controls were included with a 0 severity. Our model accurately correlated the level of skull deformity with severity (Pâ<â0.10) and predicted the severity of metopic CS more often than models using interfrontal angles (χâ=â5.46, Pâ=â0.019).This is the first study that combines shape information with expert ratings to generate an objective measure of severity for metopic CS. This method may help clinicians easily quantify the severity and perform robust longitudinal assessments of the condition.
Asunto(s)
Craneosinostosis/diagnóstico por imagen , Cara/diagnóstico por imagen , Cráneo/diagnóstico por imagen , Craneosinostosis/cirugía , Cara/cirugía , Humanos , Lactante , Aprendizaje Automático , Proyectos Piloto , Cráneo/cirugía , Tomografía Computarizada por Rayos XRESUMEN
Recently, several adjunctive procedures have gained traction to aid cleft surgeons in repairing especially challenging palatal clefts. Buccal fat flaps and buccal myomucosal flaps have demonstrated particular utility in reinforcing thin palatal flaps or tissue deficits. Although their use has not been widely accepted, they may be particularly helpful in the setting of significant scarring or vascular compromise. Here the authors describe the case of an intraoperative salvage using bilateral buccal fat flaps and a right buccal myomucosal flap after transection of the right Greater Palatine artery (GPA) during palatoplasty on a 14-month old female with Pierre Robin Sequence and a wide Veau II cleft palate. For this operative salvage, bilateral buccal fat flaps were used to reinforce the hard-soft palate junction and a 4âcm × 2âcm flap of the right-sided buccal mucosa and buccinator muscle was inset along the majority of the right-sided soft and posterior hard palate. At 2 years follow-up, the patient had no significant complications and was doing well with healthy-appearing palatal tissue and age-appropriate speech.
Asunto(s)
Arterias/cirugía , Fisura del Paladar/cirugía , Síndrome de Pierre Robin/cirugía , Terapia Recuperativa , Arterias/diagnóstico por imagen , Mejilla/cirugía , Fisura del Paladar/complicaciones , Fisura del Paladar/diagnóstico por imagen , Músculos Faciales/cirugía , Femenino , Humanos , Lactante , Cuidados Intraoperatorios , Mucosa Bucal/irrigación sanguínea , Mucosa Bucal/cirugía , Paladar Duro/irrigación sanguínea , Paladar Duro/cirugía , Síndrome de Pierre Robin/complicaciones , Síndrome de Pierre Robin/diagnóstico por imagen , Procedimientos de Cirugía Plástica , Colgajos Quirúrgicos/cirugíaRESUMEN
OBJECTIVES: The use of cone-beam computed tomography (CBCT) is well-established in clinical practice. This study seeks to categorize and quantify the incidental finding (IF) rate on CBCT in patients with cleft lip and palate (CLP) prior to orthodontic or surgical treatment. METHODS: This is systematic retrospective review of head and neck CBCTs in patients with nonsyndromic CLP taken between 2012 and 2019 at a single tertiary referral center. All assessments were performed independently by 4 observers (a head and neck radiologist and 3 orthodontists, including 2 fellowship-trained cleft-craniofacial orthodontists ). The images were divided into 9 anatomical areas and screened using serial axial slices and 3D reconstructions. The absolute number of IFs was reported for each area and statistical analysis was performed. RESULTS: Incidental findings were found in 106 (95.5%) of the 111 patients. The most common sites were the maxilla (87.4%, principally dental anomalies), paranasal sinuses (46.8%, principally inflammatory opacification), and inner ear cavities (18.9%, principally inflammatory opacification). Eleven patients had skull malformations. Thirty-three patients had IFs in 1 anatomical area, 49 patients in 2 anatomical areas, 19 patients in 3 areas, and 5 patients presented with IFs in 4 of the 9 anatomical areas. DISCUSSION: In patients with CLP, IFs on CBCT exam were present in the majority of cases. Most patients with IFs had them in multiple anatomical areas of the head and neck. The maxillary dental-alveolar complex was the most common area. Inflammatory changes in the inner ear cavities and paranasal sinuses were also common; however, cervical spine and skull abnormalities were also identified. Clinicians caring for patients with CLP should be aware of IFs, which may warrant further investigation and treatment.