Overcoming Therapeutic Challenges of Antibiotic Delivery with Cubosome Lipid Nanocarriers.

Low discovery rates for new antibiotics, commercial disincentives to invest, and inappropriate use of existing drugs have created a perfect storm of antimicrobial resistance (AMR). This "silent pandemic" of AMR looms as an immense, global threat to human health. In tandem, many potential novel drug candidates are not progressed due to elevated hydrophobicity, which may result in poor intracellular internalization and undesirable serum protein binding. With a reducing arsenal of effective antibiotics, enabling technology platforms that improve the outcome of treatments, such as repurposing existing bioactive agents, is a prospective option. Nanocarrier (NC) mediated drug delivery is one avenue for amplifying the therapeutic outcome. Here, the performance of several antibiotic classes encapsulated within the lipid-based cubosomes is examined. The findings demonstrate that encapsulation affords significant improvements in drug concentration:inhibition outcomes and assists in other therapeutic challenges associated with internalization, enzyme degradation, and protein binding. We emphasize that a currently sidelined compound, novobiocin, became active and revealed a significant increase in inhibition against the pathogenic Gram-negative strain, Pseudomonas aeruginosa. Encapsulation affords co-delivery of multiple bioactives as a strategy for mitigating failure of monotherapies and tackling resistance. The rationale in optimized drug selection and nanocarrier choice is examined by transport modeling which agrees with experimental inhibition results. The results demonstrate that lipid nanocarrier encapsulation may alleviate a range of challenges faced by antibiotic therapies and increase the range of antibiotics available to treat bacterial infections.

A systematic study of the effect of lipid architecture on cytotoxicity and cellular uptake of cationic cubosomes.

HYPOTHESIS: Lipid nanoparticles containing a cationic lipid are increasingly used in drug and gene delivery as they can display improved cellular uptake, enhanced loading for anionic cargo such as siRNA and mRNA or exhibit additional functionality such as cytotoxicity against cancer cells. This research study tests the hypothesis that the molecular structure of the cationic lipid influences the structure of the lipid nanoparticle, the cellular uptake, and the resultant cytotoxicity. EXPERIMENTS: Three potentially cytotoxic cationic lipids, with systematic variations to the hydrophobic moiety, were designed and synthesised. All the three cationic lipids synthesised contain pharmacophores such as the bicyclic coumarin group (CCA12), the tricyclic etodolac moiety (ETD12), or the large pentacyclic triterpenoid "ursolic" group (U12) conjugated to a quaternary ammonium cationic lipid containing twin C12 chains. The cationic lipids were doped into monoolein cubosomes at a range of concentrations from 0.1 mol% to 5 mol% and the effect of the lipid molecular architecture on the cubosome phase behaviour was assessed using a combination of Small Angle X-Ray Scattering (SAXS), Dynamic Light Scattering (DLS), zeta-potential and cryo-Transmission Electron Microscopy (Cryo-TEM). The resulting cytotoxicity of these particles against a range of cancerous and non-cancerous cell-lines was assessed, along with their cellular uptake. FINDINGS: The molecular architecture of the cationic lipid was linked to the internal nanostructure of the resulting cationic cubosomes with a transition to more curved cubic and hexagonal phases generally observed. Cubosomes formed from the cationic lipid CCA12 were found to have improved cellular uptake and significantly higher cytotoxicity than the cationic lipids ETD12 and U12 against the gastric cancer cell-line (AGS) at lipid concentrations ≥ 75 µg/mL. CCA12 cationic cubosomes also displayed reasonable cytotoxicity against the prostate cancer PC-3 cell-line at lipid concentrations ≥ 100 µg/mL. In contrast, 2.5 mol% ETD12 and 2.5 mol% U12 cubosomes were generally non-toxic against both cancerous and non-cancerous cell lines over the entire concentration range tested. The molecular architecture of the cationic lipid was found to influence the cubosome phase behaviour, the cellular uptake and the toxicity although further studies are necessary to determine the exact relationship between structure and cellular uptake across a range of cell lines.

Formation of particulate lipid lyotropic liquid crystalline nanocarriers using a microfluidic platform.

HYPOTHESIS: Non-lamellar lyotropic liquid crystal nanoparticles (LLCNPs) are gaining significant interest in the fields of drug delivery and nanomedicine. Traditional, top-down formulation strategies for LLCNPs are typically low-throughput, can lack controllability and reproducibility in the particle size distribution, and may be unsuitable for loading more fragile therapeutics. The development of a controllable, reproducible, scalable, and high-throughput strategy is urgently needed. EXPERIMENTS: Monoolein (MO)-based LLCNPs with various stabilizers (F127, F108, and Tween 80) and phytantriol (PT)-F127 cubosomes were produced at various flow conditions via a bottom-up method using a microfluidic platform. FINDINGS: This simple enabling strategy was used to formulate LLCNPs with lower polydispersity compared to the traditional top-down homogenization method. Significantly, particle size could be quantitatively controlled by varying the overall flow-rate; a scaling law was identified between nanoparticle mean size and the total flow rate (Q) of meansize∼Q-0.15 for MO cubosomes and meansize∼Q-0.19 for PT cubosomes (at a fixed flow rate ratio). Effective size control was achieved for a range of cubosome formulations involving different lipids and stabilizers. The formulation of stable, drug-loaded cubosomes with high encapsulation efficiency using this method was exemplified using calcein as a model drug. This work will further promote the utilisation of LLCNPs in nanomedicine and facilitate their clinical translation.

Enhancing the photoluminescence and cellular uptake of fluorescent carbon nanodots via cubosome lipid nanocarriers.

Carbon nanodots (C-dots) have attracted much attention for their use in the fields of bioimaging, drug delivery, and sensing due to their excellent fluorescent and photoluminescent properties, photostability, biocompatibility, and amenability to surface modification. Herein, we report a nanocomposite formulation of C-dots (<5 nm) encapsulated in lipid-based lyotropic liquid crystalline nanoparticles (∼250 nm) via either passive diffusion or electrostatic mechanisms. The physicochemical properties of the nanocomposite formulation including particle size, surface charge, internal cubic nanostructures, and pH-dependent fluorescent properties were characterised. Upon loading of C-dots into lipid nanoparticles, the highly ordered inverse bicontinuous cubic mesophase existed in the internal phase of the nanoparticles, demonstrated by synchrotron small angle X-ray scattering, molecular dynamic simulation and cryogenic transmission electron microscopy. The pH-dependent fluorescent property of the C-dots was modified via electrostatic interaction between the C-dots and cationic lipid nanoparticles, which further enhanced the brightness of C-dots through self-quenching prevention. The cytotoxicity and cellular uptake efficiency of the developed nanocomposites were also examined in an epithelial gastric adenocarcinoma cell line (AGS) and a macrophage cell line (stimulated THP-1). Compared to free C-dots, the uptake and cell imaging potential of the C-dot nanocomposites was significantly improved, by several orders of magnitude as demonstrated by cytoplasmic fluorescent intensities using confocal microscopy. Loading C-dots into mesoporous lipid nanocarriers presents a new way of modifying C-dot physicochemical and fluorescent properties, alternative to direct chemical surface modification, and advances the bioimaging potential of C-dots by enhancing cellular uptake efficiency and converging C-dot light emission.

Lipid membrane-mediated assembly of the functional amyloid-forming peptide Somatostatin-14.

Membrane-mediated assembly has been well characterised for toxic amyloid species such as the amyloid-ß peptide implicated in Alzheimer's disease. However, little is known about the membrane-mediated assembly of functional-amyloid forming peptides, recently identified as a natural storage state for neuropeptide hormones in vivo. Here, we study the aggregation of somatostatin-14 (SST-14) co-incubated with model lipid membranes. Atomic force microscopy (AFM) studies confirmed that nanofibrils formed in the presence of various lipid membranes display reduced fibrillogenesis and promote the formation of non-fibrillar oligomers. Both circular dichroism (CD) and intrinsic tryptophan fluorescence studies confirmed interaction between the peptide and the lipid bilayer; this interaction appears to drive changes in membrane-mediated aggregation kinetics. We show that both the surface charge of the membrane and chain packing drive changes in the electrostatic and hydrophobic interactions between the peptide and the membrane, and hence the rate of assembly. The similarities in the effect of the lipid membrane on aggregation of functional amyloids and the more well studied toxic amyloids suggest strong aggregation modifying lipid bilayer interactions are a ubiquitous feature of all amyloid fibrils and highlight the need for further investigation as to why this leads to toxicity in some systems and not others.

Uptake Dynamics of Cubosome Nanocarriers at Bacterial Surfaces and the Routes for Cargo Internalization.

Antibiotic-resistant bacteria pose a significant threat to humanity. Gram-negative strains have demonstrated resistance to last resort antibiotics, partially due to their outer membrane, which hinders transport of antimicrobials into the bacterium. Nanocarrier (NC)-mediated drug delivery is one proposed strategy for combating this emerging issue. Here, the uptake of self-assembled lipid nanocarriers of cubic symmetry (cubosomes) into bacteria revealed fundamental differences in the uptake mechanism between Gram-positive and Gram-negative bacteria. For Gram-positive bacteria, the NCs adhere to the outer peptidoglycan layers and slowly internalize to the bacterium. For Gram-negative bacteria, the NCs interact in two stages, fusion with the outer lipid membrane and then diffusion through the inner wall. The self-assembled nature of the cubosomes imparts a unique ability to transfer payloads via membrane fusion. Remarkably, the fusion uptake mechanism allowed rapid NC internalization by the Gram-negative bacteria, overcoming the outer membrane responsible for their heightened resilience. Here this is demonstrated by the marked reduction in the minimal inhibition concentration required for antibiotics against a pathogenic strain of Gram-negative bacteria, Escherichia coli. These results provide mechanistic insight for the development of lipid NCs as a new tool to combat bacteria.

Delivery of antimicrobial peptides to model membranes by cubosome nanocarriers.

Antimicrobial peptides (AMPs), which typically disrupt the bacterial wall prompting leakage or lysis of the cell, form a growing contingent in the arsenal against antibiotic resistant bacteria. The effectiveness of AMPs is, however, hampered by their low solubility, general chemical and physical instability, and short half-life in vivo. Lipid nanocarriers such as cubosomes are effective at encapsulating and protecting proteins while simultaneously showing promise in delivery applications. Here, the efficacy of cubosome mediated delivery of AMPs is evaluated by the in-situ surface characterization of model membranes with varying composition. The cubosomes were observed to initially fuse with the membranes, with subsequent membrane disruption observed after approximately 20 - 60 min. The time for the disruption was sensitive to the charge of the cubosome as well as the composition of the bilayer. More physiologically relevant bilayers including lipids with phospho-(1'-rac-glycerol) (PG) or phosphoethanolamine (PE) headgroups were more vulnerable than those of neat phosphocholine (PC). Notably, disruption to the bilayer occurred an order of magnitude faster for encapsulated AMP compared to free AMP.

Reduction of enzymatic degradation of insulin via encapsulation in a lipidic bicontinuous cubic phase.

Oral delivery of the protein drug insulin is not currently possible due to rapid degradation of the secondary structure in low pH conditions in the stomach and under the influence of digestive enzymes in the gastrointestinal tract. Effective oral delivery of insulin and other protein- or peptide-based drugs will, therefore, require encapsulation in a material or nanoparticle. Herein we investigate the ability of the lipid bicontinuous cubic phase formed by two lipids, monoolein (MO) and phytantriol (PT), to protect encapsulated insulin from degradation by the enzyme chymotrypsin, typically found in the small intestine. High encapsulation efficiency (>80%) was achieved in both lipid cubic phases with retention of the underlying cubic nanostructure. Release of insulin from the cubic matrix was shown to be diffusion-controlled; the release rate was dependent on the cubic nanostructure and consistent with measured diffusion coefficients for encapsulated insulin. Encapsulation was shown to significantly retard enzymatic degradation relative to that in water, with the protective effect lasting up to 2 h, exemplifying the potential of these materials to protect the encapsulated protein payload during oral delivery.

Accelerated Formation of H2 Nanobubbles from a Surface Nanodroplet Reaction.

The compartmentalization of chemical reactions within droplets has advantages in low costs, reduced consumption of reagents, and increased throughput. Reactions in small droplets have also been shown to greatly accelerate the rate of many chemical reactions. The accelerated growth rate of nanobubbles from nanodroplet reactions is demonstrated in this work. The gaseous products from the reaction at the nanodroplet surface promoted nucleation of hydrogen nanobubbles within multiple organic liquid nanodroplets. The nanobubbles were confined within the droplets and selectively grew and collapsed at the droplet perimeter, as visualized by microscopy with high spatial and temporal resolutions. The growth rate of the bubbles was significantly accelerated within small droplets and scaled inversely with droplet radius. The acceleration was attributed to confinement from the droplet volume and effect from the surface area on the interfacial chemical reaction for gas production. The results of this study provide further understanding for applications in droplet enhanced production of nanobubbles and the on-demand liberation of hydrogen.

Toxicity and cellular uptake of lipid nanoparticles of different structure and composition.

Cubosomes form part of the next generation of lipid nanoparticle drug delivery vehicles, enabling higher drug encapsulation efficiency, particularly for lipophilic drugs, compared to traditional liposome formulations. However, the mechanism of interaction of cubosome lipid nanoparticles with cells and their resultant cytotoxicity is not yet well characterised. We hypothesise that the uptake mechanism is dependent on the cell-type, and that cellular toxicity will be controlled by both the lipid composition and the uptake mechanism. The uptake of cubosomes into fibroblast and macrophage cell lines was investigated using live-cell imaging on a confocal microscope. Toxicity of the lipid particles was determined using Fluorescence-Activated Cell Sorting (FACS). Atomic Force Microscopy (AFM) provided an overview of the topography of the surface of individual cells. The cells exhibited a contrast in uptake kinetics depending on cell type attributed to varying uptake mechanisms. Cellular toxicity was dictated more by lipid composition than by the internal particle nanostructure or the uptake mechanism. Surface topography showed many surface ridges in the STO cells which could provide a location for cubosome adhesion prior to uptake. The findings provide a crucial guideline for the future engineering and application of lipid nanoparticles in drug delivery applications.

Preparation, Characterization, and Antimicrobial Activity of Cubosome Encapsulated Metal Nanocrystals.

Herein, we demonstrate a method for the functionalization of cubic phase lipid nanoparticles (cubosomes) with a series of magnetite (Fe3O4), copper oxide (Cu2O), and silver (Ag) nanocrystals, with prospective applications across a wide range of fields, including antimicrobial treatments. The resulting cubosomes are characterized using small-angle X-ray scattering and dynamic light scattering, demonstrating the retention of a typical cubic phase structure and particle size following nanocrystal encapsulation at concentrations up to 20% w/w. Cryogenic transmission electron microscopy reveals significant loading and association of each nanocrystal type with both monoolein- and phytantriol-based cubosomes. The antibiotic potential of these hybrid nanoparticles is demonstrated for the first time; cubosomes with embedded silver nanocrystals display a high level of antimicrobial activity against both Gram-positive and Gram-negative bacteria, with observed minimum inhibitory concentration values ranging from 15.6-250 µg/mL. Lastly, total internal reflection fluorescence microscopy is used to visualize cubosome-bacteria interactions, suggesting the involvement of particle interactions as a delivery mechanism.

Fusion dynamics of cubosome nanocarriers with model cell membranes.

Drug delivery with nanocarriers relies on the interaction of individual nanocarriers with the cell surface. For lipid-based NCs, this interaction uniquely involves a process of membrane fusion between the lipid bilayer that makes up the NC and the cell membrane. Cubosomes have emerged as promising fusogenic NCs, however their individual interactions had not yet been directly observed due to difficulties in achieving adequate resolution or disentangling multiple interactions with common characterization techniques. Moreover, many studies on these interactions have been performed under static conditions which may not mimic the actual transport of NCs. Herein we have observed fusion of lipid cubosome NCs with lipid bilayers under flow. Total internal reflection microscopy has allowed visualisation of the fusion event which was sensitive to the lipid compositions and rationalized by lipid diffusion. The fusion event in supported lipid bilayers has been compared with those in cells, revealing a distinct similarity in kinetics.

Mechanical stability of surface architecture--consequences for superhydrophobicity.

Wet chemistry methods such as sol-gel provide a facile means of preparing coatings with controlled surface chemistry and architecture. The manipulation of colloidal "building blocks," film constituents, and reaction conditions makes it a promising method for simple, scalable, and routine production of superhydrophobic coatings. Despite all of this, the practical application of superhydrophobic coatings remains limited by low mechanical durability. The translation of chemistry to mechanical strength within superhydrophobic films is severely hindered by the requisite physical structure. More specifically, porosity and the surface architecture of roughness in sol-gel-derived films contribute significantly to poor mechanical properties. These physical effects emphasize that collective structure and chemistry-based strategies are required. This challenge is not unique to superhydrophobics, and there are many principles that can be drawn upon to greatly improve performance. The delicate interplay between chemistry and physical structure has been highlighted through theory and characterization of porous and rough interfaces within and outside the framework of superhydrophobics. Insights can further be drawn from biology. Nature's capacity for self-repair remains extremely challenging to mimic in materials. However, nature does demonstrate strategies for structuring nano- and microbuilding blocks to achieve generally mutually exclusive properties. Difficulties with characterization and example mechanical characterization methods have also been emphasized.

Toward superhydrophobic and durable coatings: effect of needle vs crater surface architecture.

Practical application of sol-gel derived superhydrophobic films is limited by the fragility of "needlelike" surface roughness. An efficient one step procedure is developed to prepare robust thin films with "craterlike" surface roughness from a methyltrimethoxysilane matrix and polymer sphere templates. The films could be readily spray coated to produce roughened surface textures, which are governed by template concentration and geometry. The effect of this on the wettability and robustness of thin films was examined in detail, revealing a rapid trade-off between the two characteristics due to variations in coating porosity.