Targeting the Main Protease (Mpro, nsp5) by Growth of Fragment Scaffolds Exploiting Structure-Based Methodologies.

The main protease Mpro, nsp5, of SARS-CoV-2 (SCoV2) is one of its most attractive drug targets. Here, we report primary screening data using nuclear magnetic resonance spectroscopy (NMR) of four different libraries and detailed follow-up synthesis on the promising uracil-containing fragment Z604 derived from these libraries. Z604 shows time-dependent binding. Its inhibitory effect is sensitive to reducing conditions. Starting with Z604, we synthesized and characterized 13 compounds designed by fragment growth strategies. Each compound was characterized by NMR and/or activity assays to investigate their interaction with Mpro. These investigations resulted in the four-armed compound 35b that binds directly to Mpro. 35b could be cocrystallized with Mpro revealing its noncovalent binding mode, which fills all four active site subpockets. Herein, we describe the NMR-derived fragment-to-hit pipeline and its application for the development of promising starting points for inhibitors of the main protease of SCoV2.

Decrypting Integrins by Mixed-Solvent Molecular Dynamics Simulations.

Integrins are a family of α/ß heterodimeric cell surface adhesion receptors which are capable of transmitting signals bidirectionally across membranes. They are known for their therapeutic potential in a wide range of diseases. However, the development of integrin-targeting medications has been impacted by unexpected downstream effects including unwanted agonist-like effects. Allosteric modulation of integrins is a promising approach to potentially overcome these limitations. Applying mixed-solvent molecular dynamics (MD) simulations to integrins, the current study uncovers hitherto unknown allosteric sites within the integrin α I domains of LFA-1 (αLß2; CD11a/CD18), VLA-1 (α1ß1; CD49a/CD29), and Mac-1 (αMß2, CD11b/CD18). We show that these pockets are putatively accessible to small-molecule modulators. The findings reported here may provide opportunities for the design of novel allosteric integrin inhibitors lacking the unwanted agonism observed with earlier as well as current integrin-targeting drugs.

Allosteric targeting resolves limitations of earlier LFA-1 directed modalities.

Integrins are a family of cell surface receptors well-recognized for their therapeutic potential in a wide range of diseases. However, the development of integrin targeting medications has been impacted by unexpected downstream effects, reflecting originally unforeseen interference with the bidirectional signalling and cross-communication of integrins. We here selected one of the most severely affected target integrins, the integrin lymphocyte function-associated antigen-1 (LFA-1, αLß2, CD11a/CD18), as a prototypic integrin to systematically assess and overcome these known shortcomings. We employed a two-tiered ligand-based virtual screening approach to identify a novel class of allosteric small molecule inhibitors targeting this integrin's αI domain. The newly discovered chemical scaffold was derivatized, yielding potent bis-and tris-aryl-bicyclic-succinimides which inhibit LFA-1 in vitro at low nanomolar concentrations. The characterisation of these compounds in comparison to earlier LFA-1 targeting modalities established that the allosteric LFA-1 inhibitors (i) are devoid of partial agonism, (ii) selectively bind LFA-1 versus other integrins, (iii) do not trigger internalization of LFA-1 itself or other integrins and (iv) display oral availability. This profile differentiates the new generation of allosteric LFA-1 inhibitors from previous ligand mimetic-based LFA-1 inhibitors and anti-LFA-1 antibodies, and is projected to support novel immune regulatory regimens selectively targeting the integrin LFA-1. The rigorous computational and experimental assessment schedule described here is designed to be adaptable to the preclinical discovery and development of novel allosterically acting compounds targeting integrins other than LFA-1, providing an exemplary approach for the early characterisation of next generation integrin inhibitors.

Trypsin inhibitors for the treatment of pancreatitis.

Proline-based trypsin inhibitors occupying the S1-S2-S1' region were identified by an HTS screening campaign. It was discovered that truncation of the P1' moiety and appropriate extension into the S4 region led to highly potent trypsin inhibitors with excellent selectivity against related serine proteases and a favorable hERG profile.

trans-(3S,4S)-Disubstituted pyrrolidines as inhibitors of the human aspartyl protease renin. Part I: prime site exploration using an amino linker.

Recently, we reported on the discovery of (3S,4S)-disubstituted pyrrolidines (e.g., 2) as inhibitors of the human aspartyl protease renin. In our effort to further expand the scope of this novel class of direct renin inhibitors, a new sub-series was designed in which the prime site substituents are linked to the pyrrolidine core by a (3S)-amino functional group. In particular, analogs bearing the corresponding sulfonamide spacer (50, 51 and 54a) demonstrated a pronounced increase in in vitro potency compared to compound 2.

trans-3,4-Disubstituted pyrrolidines as inhibitors of the human aspartyl protease renin. Part II: prime site exploration using an oxygen linker.

Inhibition of the aspartyl protease renin is considered as an efficient approach for treating hypertension. Lately, we described the discovery of a novel class of direct renin inhibitors which comprised a pyrrolidine scaffold (e.g., 2). Based on the X-ray structure of the lead compound 2 bound to renin we predicted that optimization of binding interactions to the prime site could offer an opportunity to further expand the scope of this chemotype. Pyrrolidine-based inhibitors were synthesized in which the prime site moieties are linked to the pyrrolidine core through an oxygen atom, resulting in an ether or a carbamate linker subseries. Especially the carbamate derivatives showed a pronounced increase in in vitro potency compared to 2. Here we report the structure-activity relationship of both subclasses and demonstrate blood pressure lowering effects for an advanced prototype in a hypertensive double-transgenic rat model after oral dosing.

The discovery of novel potent trans-3,4-disubstituted pyrrolidine inhibitors of the human aspartic protease renin from in silico three-dimensional (3D) pharmacophore searches.

The small-molecule trans-3,4-disubstituted pyrrolidine 6 was identified from in silico three-dimensional (3D) pharmacophore searches based on known X-ray structures of renin-inhibitor complexes and demonstrated to be a weakly active inhibitor of the human enzyme. The unexpected binding mode of the more potent enantiomer (3S,4S)-6a in an extended conformation spanning the nonprime and S1' pockets of the recombinant human (rh)-renin active site was elucidated by X-ray crystallography. Initial structure-activity relationship work focused on modifications of the hydrophobic diphenylamine portion positioned in S1 and extending toward the S2 pocket. Replacement with an optimized P3-P1 pharmacophore interacting to the nonsubstrate S3(sp) cavity eventually resulted in significantly improved in vitro potency and selectivity. The prototype analogue (3S,4S)-12a of this new class of direct renin inhibitors exerted blood pressure lowering effects in a hypertensive double-transgenic rat model after oral administration.

A novel class of oral direct renin inhibitors: highly potent 3,5-disubstituted piperidines bearing a tricyclic p3-p1 pharmacophore.

A small library of fragments comprising putative recognition motifs for the catalytic dyad of aspartic proteases was generated by in silico similarity searches within the corporate compound deck based on rh-renin active site docking and scoring filters. Subsequent screening by NMR identified the low-affinity hits 3 and 4 as competitive active site binders, which could be shown by X-ray crystallography to bind to the hydrophobic S3-S1 pocket of rh-renin. As part of a parallel multiple hit-finding approach, the 3,5-disubstituted piperidine (rac)-5 was discovered by HTS using a enzymatic assay. X-ray crystallography demonstrated the eutomer (3S,5R)-5 to be a peptidomimetic inhibitor binding to a nonsubstrate topography of the rh-renin prime site. The design of the potent and selective (3S,5R)-12 bearing a P3(sp)-tethered tricyclic P3-P1 pharmacophore derived from 3 is described. (3S,5R)-12 showed oral bioavailability in rats and demonstrated blood pressure lowering activity in the double-transgenic rat model.

Calcium disodium hexa-thio-diphosphate(IV) octa-hydrate.

Single crystals of the title compound, CaNa(2)(P(2)S(6))·8H(2)O, were obtained by adding calcium hydroxide to an aqueous solution of Na(4)(P(2)S(6))·6H(2)O. The structure is isotypic with that of its strontium analogue and consists of one Ca(2+) cation, two Na(+) cations, one-half of a centrosymmetric (P(2)S(6))(4-) anion with staggered confirmation and four water mol-ecules in the asymmetric unit. The crystal structure can be described as being built up from layers of cations and anions extending parallel to (101). Within a layer, each CaO(8) polyhedron is connected via edge-sharing to two NaO(4)S(2) octa-hedra and to one NaO(2)S(4) octa-edron. The NaO(4)S(2) octa-hedra are, in turn, linked with two (P(2)S(6))(4-) anions through common corners. Various O-H⋯S hydrogen-bonding inter-actions lead to cohesion of adjacent layers. The Ca(2+) and one Na(+) cation are situated on a twofold rotation axis and the second Na(+) cation is situated on an inversion centre.

Strontium disodium hexa-thio-diphosphate(IV) octa-hydrate.

The crystal structure of SrNa(2)(P(2)S(6))·8H(2)O is isotypic with that of its calcium analogue. The asymmetric unit consists of one Sr(2+) cation (2 symmetry), two Na(+) cations (2 and symmetry, respectively), one-half of a centrosymmetric (P(2)S(6))(4-) anion with a staggered confirmation and four water mol-ecules. The crystal structure is built up from layers of cations and anions extending parallel to (101). Each SrO(8) polyhedron is connected via edge-sharing to two NaO(4)S(2) octa-hedra and to one NaO(2)S(4) octa-hedron. The NaO(4)S(2) octa-edra are, in turn, connected with two (P(2)S(6))(4-) anions through common corners. Adjacent layers are held together by several O-H⋯S hydrogen-bonding inter-actions.

Discovery of 3-(1H-indol-3-yl)-4-[2-(4-methylpiperazin-1-yl)quinazolin-4-yl]pyrrole-2,5-dione (AEB071), a potent and selective inhibitor of protein kinase C isotypes.

A series of novel maleimide-based inhibitors of protein kinase C (PKC) were designed, synthesized, and evaluated. AEB071 (1) was found to be a potent, selective inhibitor of classical and novel PKC isotypes. 1 is a highly efficient immunomodulator, acting via inhibition of early T cell activation. The binding mode of maleimides to PKCs, proposed by molecular modeling, was confirmed by X-ray analysis of 1 bound in the active site of PKCalpha.

Peptide inhibitors of dengue virus NS3 protease. Part 2: SAR study of tetrapeptide aldehyde inhibitors.

With the aim of discovering potent and selective dengue NS3 protease inhibitors, we systematically synthesized and evaluated a series of tetrapeptide aldehydes based on lead aldehyde 1 (Bz-Nle-Lys-Arg-Arg-H, K(i)=5.8 microM). In general, we observe that interactions of P(2) side chain are more important than P(1) followed by P(3) and P(4). Tripeptide and dipeptide aldehyde inhibitors also show low micromolar activity. Additionally, an effective non-basic, uncharged replacement of P(1) Arg is identified.

Non-covalent polyvalent ligands by self-assembly of small glycodendrimers: a novel concept for the inhibition of polyvalent carbohydrate-protein interactions in vitro and in vivo.

Polyvalent carbohydrate-protein interactions occur frequently in biology, particularly in recognition events on cellular membranes. Collectively, they can be much stronger than corresponding monovalent interactions, rendering it difficult to control them with individual small molecules. Artificial macromolecules have been used as polyvalent ligands to inhibit polyvalent processes; however, both reproducible synthesis and appropriate characterization of such complex entities is demanding. Herein, we present an alternative concept avoiding conventional macromolecules. Small glycodendrimers which fulfill single molecule entity criteria self-assemble to form non-covalent nanoparticles. These particles-not the individual molecules-function as polyvalent ligands, efficiently inhibiting polyvalent processes both in vitro and in vivo. The synthesis and characterization of these glycodendrimers is described in detail. Furthermore, we report on the characterization of the non-covalent nanoparticles formed and on their biological evaluation.

Absolute free energies of binding of peptide analogs to the HIV-1 protease from molecular dynamics simulations.

The constants of binding of five peptide analogs to the active site of the HIV-1 aspartic-protease are calculated based on a novel sampling scheme that is efficient and does not introduce any approximations in addition to the energy function used to describe the system. The results agree with experiments. The squared correlation coefficient of the calculated vs. the measured values is 0.79. The sampling scheme consists of a series of molecular dynamics integrations with biases. The biases are selected based on an estimate of the probability density function of the system in a way to explore the conformational space and to reduce the statistical error in the calculated binding constants. The molecular dynamics integrations are done with a vacuum potential using a short cutoff scheme. To estimate the probability density of the simulated system, the results of the molecular dynamics integrations are combined using an extension of the weighted histogram analysis method (C. Bartels, Chem. Phys. Letters 331 (2000) 446-454). The probability density of the solvated ligand-protein system is obtained by applying a correction for the use of the short cutoffs in the simulations and by taking into account solvation with an electrostatic term and a hydrophobic term. The electrostatic part of the solvation is determined by finite difference Poisson-Boltzmann calculations; the hydrophobic part of the solvation is set proportional to the solvent accessible surface area. Setting the hydrophobic surface tension parameter equal to 8 mol(-1) K(-1) A(-2), absolute binding constants are in the muM to nM range. This is in agreement with experiments. The standard errors determined from eight repeated binding constant determinations are a factor of 14 to 411. A single determination of a binding constant is done with 499700 steps of molecular dynamics integration and 4500 finite difference Poisson-Boltzmann calculations. The simulations can be analyzed with respect to conformational changes of the active site of the HIV-1 protease or the ligands upon binding and provide information that complements experiments and can be used in the drug development process.

1,4-Diazepane-2,5-diones as novel inhibitors of LFA-1.

1,4-Diazepane-2,5-diones (2) are found to be a new class of potent LFA-1 inhibitors. The synthesis, structure, and biological evaluation of these 1,4-diazepine-2,5-diones and related derivatives are described.

1,4-Diazepane-2-ones as novel inhibitors of LFA-1.

The design, synthesis, and biological evaluation of 1,4-diazepane-2-ones as novel LFA-1 antagonists from a scaffold-based combinatorial library are described. Initial optimization of the library lead has resulted in high-affinity antagonists of the LFA-1/ICAM-1 interaction, such as compounds 18d and 18e with IC(50) values of 110 and 70 nM, respectively.

Computer-Aided Design of Thrombin Inhibitors.

Computer-aided ligand design is an active, challenging, and multidisciplinary research field that blends knowledge of biochemistry, physics, and computer sciences. Whenever it is possible to experimentally determine or to model the three-dimensional structure of a pharmacologically relevant enzyme or receptor, computational approaches can be used to design specific high-affinity ligands. This article describes methods, applications, and perspectives of computer-assisted ligand design.