Closed-Loop Recyclable Poly(imine-acetal)s with Dual-Cleavable Bonds for Primary Building Block Recovery.

Chemical recycling offers a promising solution for the end-of-life treatment of synthetic polymers. However, the efficient recovery of well-defined recycled building blocks continues to be a major challenge, especially for crosslinked thermosets. Here, we developed vanillin-based polymer networks functionalized with dual-cleavable imine and acetal bonds that facilitate chemical recycling to primary building blocks and their convenient separation at the molecular level. A library of crosslinked poly(imine-acetal)s was synthesized by combining the in-bulk synthesized liquid di-vanillin acetal monomer (DVA) with commercially available liquid di- and triamines under solvent-free conditions. These thermosets showed tailor-made thermal and mechanical properties along with outstanding chemical recyclability. Under aqueous acidic conditions, poly(imine-acetal)s selectively and completely disintegrate into small molecules. During the polymer design stage, these compounds were carefully selected to enable facile separation without tedious techniques. As a result, the primary building blocks were isolated in high yields and purity and immediately reused to produce fresh polymers with identical thermomechanical properties. Since our "design for recycling" concept aims at obtaining the primary building blocks rather than monomers after depolymerization, a plethora of possibilities are unlocked to utilize these chemical resources, including closed-loop recycling as portrayed.

Epoxy Thermosets Designed for Chemical Recycling.

Epoxy thermosets constitute a significant portion of high-performance plastics, as they possess excellent thermal and mechanical properties that are applicable in a wide range of industries. Nevertheless, traditional epoxy networks show strict limitations regarding chemical recycling due to their covalently crosslinked structures. Although existing methods provide partial solutions for the recycling of epoxy networks, it is urgent to develop more effective, sustainable, and permanent strategies that will solve the problem at hand. For this purpose, developing smart monomers with functional groups that enable the synthesis and development of fully recyclable polymers is of great importance. This review highlights recent advancements in chemically recyclable epoxy systems and their potential to support a circular plastic economy. Moreover, we evaluate the practicality of polymer syntheses and recycling techniques, and assess the applicability of these networks in industry.

Photocatalysis as an Effective Tool for Upcycling Polymers into Value-Added Molecules.

Shaping a sustainable future is closely tied to the development of advanced plastic recycling technologies. As global recycling rates remain low, the lion's share of post-consumer plastics is either incinerated or disposed of in landfills. This unbalanced plastic waste management not only poses severe environmental risks, but also entails an irrevocable loss of chemical resources that are embedded in synthetic polymers. To give plastic waste a new life, a series of photocatalytic methods has recently been reported that convert polymers directly into value-added organic molecules. These approaches operate at ambient temperature, show high reactivity/selectivity, and provide alternative reaction pathways as compared to thermal depolymerizations. This Minireview highlights the scientific breakthroughs in upcycling polymers through state-of-the-art photocatalysis under environmentally benign conditions.

Closed-Loop Recyclable High-Performance Polyimine Aerogels Derived from Bio-Based Resources.

Organic aerogels are an intriguing class of highly porous and ultralight materials which have found widespread applications in thermal insulation, energy storage, and chemical absorption. These fully cross-linked polymeric networks, however, pose environmental concerns as they are typically made from fossil-based feedstock and the recycling back to their original monomers is virtually impossible. In addition, organic aerogels suffer from low thermal stability and potential fire hazard. To overcome these obstacles and create next-generation organic aerogels, a set of polyimine aerogels containing reversible chemical bonds which can selectively be cleaved on demand is prepared. As precursors, different primary amines and cyclophosphazene derivatives made from bio-based reagents (vanillin and 4-hydroxybenzaldehyde) to elevate the thermal stability and reduce the environmental impact are used. The resulting polyimine aerogels exhibit low shrinkage, high porosity, large surface area, as well as pronounced thermal stability and flame resistance. More importantly, the aerogels show excellent recyclability under acidic conditions with high monomer recovery yields and purities. This approach allows for preparation of fresh aerogels from the retrieved building blocks, thus demonstrating efficient closed-loop recycling. These high-performance, recyclable, and bio-based polyimine aerogels pave the way for advanced and sustainable superinsulating materials.

Closed-Loop Recycling of Poly(Imine-Carbonate) Derived from Plastic Waste and Bio-based Resources.

Closed-loop recycling of polymers represents the key technology to convert plastic waste in a sustainable fashion. Efficient chemical recycling and upcycling strategies are thus highly sought-after to establish a circular plastic economy. Here, we present the selective chemical depolymerization of polycarbonate by employing a vanillin derivative as bio-based feedstock. The resulting di-vanillin carbonate monomer was used in combination with various amines to construct a library of reprocessable poly(imine-carbonate)s, which show tailor-made thermal and mechanical properties. These novel poly(imine-carbonate)s exhibit excellent recyclability under acidic and energy-efficient conditions. This allows the recovery of monomers in high yields and purity for immediate reuse, even when mixed with various commodity plastics. This work provides exciting new insights in the design of bio-based circular polymers produced by upcycling of plastic waste with minimal environmental impact.

En Route to Stabilized Compact Conformations of Single-Chain Polymeric Nanoparticles in Complex Media.

Precise control over the folding pathways of polypeptides using a combination of noncovalent and covalent interactions has evolved into a wide range of functional proteins with a perfectly defined 3D conformation. Inspired hereby, we develop a series of amphiphilic copolymers designed to form compact, stable, and structured single-chain polymeric nanoparticles (SCPNs) of defined size, even in competitive conditions. The SCPNs are formed through a combination of noncovalent interactions (hydrophobic and hydrogen-bonding interactions) and covalent intramolecular cross-linking using a light-induced [2 + 2] cycloaddition. By comparing different self-assembly pathways of the nanoparticles, we show that, like for proteins in nature, the order of events matters. When covalent cross-links are formed prior to the folding via hydrophobic and supramolecular interactions, larger particles with less structured interiors are formed. In contrast, when the copolymers first fold via hydrophobic and hydrogen-bonding interactions into compact conformations, followed by covalent cross-links, good control over the size of the SCPNs and microstructure of the hydrophobic interior is achieved. Such a structured SCPN can stabilize the solvatochromic dye benzene-1,3,5-tricarboxamide-Nile Red via molecular recognition for short periods of time in complex media, while showing slow exchange dynamics with the surrounding complex media at longer time scales. The SCPNs show good biocompatibility with cells and can carry cargo into the lysosomal compartments of the cells. Our study highlights the importance of control over the folding pathway in the design of stable SCPNs, which is an important step forward in their application as noncovalent drug or catalyst carriers in biological settings.

Direct C-H Trifluoromethylation of (Hetero)Arenes in Water Enabled by Organic Photoredox-Active Amphiphilic Nanoparticles.

Photoredox-catalyzed chemical conversions are predominantly operated in organic media to ensure good compatibility between substrates and catalysts. Yet, when conducted in aqueous media, they are an attractive, mild, and green way to introduce functional groups into organic molecules. We here show that trifluoromethyl groups can be readily installed into a broad range of organic compounds by using water as the reaction medium and light as the energy source. To bypass solubility obstacles, we developed robust water-soluble polymeric nanoparticles that accommodate reagents and photocatalysts within their hydrophobic interior under high local concentrations. By taking advantage of the high excited state reduction potential of N-phenylphenothiazine (PTH) through UV light illumination, the direct C-H trifluoromethylation of a wide array of small organic molecules is achieved selectively with high substrate conversion. Key to our approach is slowing down the production of CF3 radicals during the chemical process by reducing the catalyst loading as well as the light intensity, thereby improving effectiveness and selectivity of this aqueous photocatalytic method. Furthermore, the catalyst system shows excellent recyclability and can be fueled by sunlight. The method we propose here is versatile, widely applicable, energy efficient, and attractive for late-stage introduction of trifluoromethyl groups into biologically active molecules.

Photoredox-Catalyzed Reduction of Halogenated Arenes in Water by Amphiphilic Polymeric Nanoparticles.

The use of organic photoredox catalysts provides new ways to perform metal-free reactions controlled by light. While these reactions are usually performed in organic media, the application of these catalysts at ambient temperatures in aqueous media is of considerable interest. We here compare the activity of two established organic photoredox catalysts, one based on 10-phenylphenothiazine (PTH) and one based on an acridinium dye (ACR), in the light-activated dehalogenation of aromatic halides in pure water. Both PTH and ACR were covalently attached to amphiphilic polymers that are designed to form polymeric nanoparticles with hydrodynamic diameter DH ranging between 5 and 11 nm in aqueous solution. Due to the hydrophobic side groups that furnish the interior of these nanoparticles after hydrophobic collapse, water-insoluble reagents can gather within the nanoparticles at high local catalyst and substrate concentrations. We evaluated six different amphiphilic polymeric nanoparticles to assess the effect of polymer length, catalyst loading and nature of the catalyst (PTH or ACR) in the dechlorination of a range of aromatic chlorides. In addition, we investigate the selectivity of both catalysts for reducing different types of aryl-halogen bonds present in one molecule, as well as the activity of the catalysts for C-C cross-coupling reactions. We find that all polymer-based catalysts show high activity for the reduction of electron-poor aromatic compounds. For electron-rich compounds, the ACR-based catalyst is more effective than PTH. In the selective dehalogenation reactions, the order of bond stability is C-Cl > C-Br > C-I irrespective of the catalyst applied. All in all, both water-compatible systems show good activity in water, with ACR-based catalysts being slightly more efficient for more resilient substrates.

Tough Multimaterial Interfaces through Wavelength-Selective 3D Printing.

Strong and well-engineered interfaces between dissimilar materials are a hallmark of natural systems but have proven difficult to emulate in synthetic materials, where interfaces often act as points of failure. In this work, curing reactions that are triggered by exposure to different wavelengths of visible light are used to produce multimaterial objects with tough, well-defined interfaces between chemically distinct domains. Longer-wavelength (green) light selectively initiates acrylate-based radical polymerization, while shorter-wavelength (blue) light results in the simultaneous formation of epoxy and acrylate networks through orthogonal cationic and radical processes. The improved mechanical strength of these interfaces is hypothesized to arise from a continuous acrylate network that bridges domains. Using printed test structures, interfaces were characterized through spatial resolution of their chemical composition, localized mechanical properties, and bulk fracture strength. This wavelength-selective photocuring of interpenetrating polymer networks is a promising strategy for increasing the mechanical performance of 3D-printed objects and expanding light-based additive manufacturing technologies.

Highly Ordered 2D-Assemblies of Phase-Segregated Block Molecules for Upconverted Linearly Polarized Emission.

Materials based on the laminar ordering of self-assembled molecules have a unique potential for applications requiring efficient energy migration through densely packed chromophores. Here, employing molecular assemblies of coil-rod-coil block molecules for triplet-triplet annihilation upconversion (TTA-UC) based on triplet energy migration with linearly polarized emission is reported. By covalently attaching discrete-length oligodimethylsiloxane (oDMS) to 9,10-diphenylanthracene (DPA), highly ordered 2D crystalline DPA sheets separated by oDMS layers are obtained. Transparent films of this material doped with small amounts of triplet sensitizer PtII octaethylporphyrin show air-stable TTA-UC under non-coherent excitation. Upon annealing, an increase in TTA-UC up to two orders of magnitude is observed originating from both an improved molecular ordering of DPA and an increased dispersion of the sensitizer. The molecular alignment in millimeter-sized domains leads to upconverted linearly polarized emission without alignment layers. By using a novel technique, upconversion imaging microscopy, the TTA-UC intensity is spatially resolved on a micrometer scale to visually demonstrate the importance of molecular dispersion of sensitizer molecules for efficient TTA-UC. The reported results are promising for anti-counterfeiting and 3D night-vision applications, but also exemplify the potential of discrete oligodimethylsiloxane functionalized chromophores for highly aligned and densely packed molecular materials.

Amphiphilic Polymeric Nanoparticles for Photoredox Catalysis in Water.

Photoredox catalysis has recently emerged as a powerful synthesis tool in organic and polymer chemistry. In contrast to the great achievements realized in organic solvents, performing photocatalytic processes efficiently in aqueous media encounters several challenges. Here, it is presented how amphiphilic single-chain polymeric nanoparticles (SCPNs) can be utilized as small reactors to conduct light-driven chemical reactions in water. By incorporating a phenothiazine (PTH) catalyst into the polymeric scaffold, metal-free reduction and C-C cross-coupling reactions can be carried out upon exposure to UV light under ambient conditions. The versatility of this approach is underlined by a large substrate scope, tolerance towards oxygen, and excellent recyclability. This approach thereby contributes to a sustainable and green way of implementing photoredox catalysis.

Enlightening Materials with Photoswitches.

Incorporating molecular photoswitches into various materials provides unique opportunities for controlling their properties and functions with high spatiotemporal resolution using remote optical stimuli. The great and largely still untapped potential of these photoresponsive systems has not yet been fully exploited due to the fundamental challenges in harnessing geometrical and electronic changes on the molecular level to modulate macroscopic and bulk material properties. Herein, progress made during the past decade in the field of photoswitchable materials is highlighted. After pointing to some general design principles, materials with an increasing order of the integrated photoswitchable units are discussed, spanning the range from amorphous settings over surfaces/interfaces and supramolecular ensembles, to liquid crystalline and crystalline phases. Finally, some potential future directions are pointed out in the conclusion. In view of the exciting recent achievements in the field, the future emergence and further development of light-driven and optically programmable (inter)active materials and systems are eagerly anticipated.

Photoswitchable polymerization catalysis: state of the art, challenges, and perspectives.

Adjusting the length, composition, and microstructure of a polymer during the process of its formation in principle allows achieving the desired properties, thereby enabling custom-design of the thus generated polymer for its targeted function. Over the past years, different stimuli have been applied to manipulate responsive catalyst systems in situ; among them light takes center stage as perhaps the most promising stimulus. Here, we highlight recent progress in the area of photoswitchable polymerization catalysis. In particular, we focus on the challenge of combining photoswitchable and catalytically active units in a manner that both entities are somehow coupled and interact, yet also retaining their switching and catalysis functions under suitable conditions. We introduce the requirements for an ideal case of a photoswitchable polymerization catalyst system and use them to analyze the current state of the art. Based on our analysis of the status quo, we point to scientific challenges in the field and sketch perspectives including potential applications.

External Reversal of Chirality Transfer in Photoswitches.

The transfer of stereoinformation is at the heart of asymmetric reactions. By incorporating the natural monoterpene l-menthone into the backbone of a diarylethene, we achieved efficient chirality transfer upon photocyclization, resulting in the preferred formation of one major closed isomer in a diastereomeric ratio (d.r.) of 85:15. More significantly, we were able to completely reverse the diastereomeric outcome of the ring closure simply by altering the chemical environment or the irradiation conditions. As a result, we could selectively accumulate the less favored minor closed isomer, with remarkable d.r. values of >99:1 and 74:26, respectively. Computations revealed that a stability inversion after photocyclization is the basis for the observed unprecedented control over diastereoselectivity.

Light-driven molecular trap enables bidirectional manipulation of dynamic covalent systems.

Bond formation between two molecular entities in a closed system strictly obeys the principle of microscopic reversibility and occurs in favour of the thermodynamically more stable product. Here, we demonstrate how light can bypass this fundamental limitation by driving and controlling the reversible bimolecular reaction between an N-nucleophile and a photoswitchable carbonyl electrophile. Light-driven tautomerization cycles reverse the reactivity of the C=O/C=N-electrophiles ('umpolung') to activate substrates and remove products, respectively, solely depending on the illumination wavelength. By applying either red or blue light, selective and nearly quantitative intermolecular bond formation/scission can be achieved, even if the underlying condensation/hydrolysis equilibrium is thermodynamically disfavoured. Exploiting light-driven in situ C=N exchange, our approach can be used to externally regulate a closed dynamic covalent system by actively and reversibly removing specific components, resembling a molecular and bidirectional version of a macroscopic Dean-Stark trap.

Solution Mask Liquid Lithography (SMaLL) for One-Step, Multimaterial 3D Printing.

A novel methodology for printing 3D objects with spatially resolved mechanical and chemical properties is reported. Photochromic molecules are used to control polymerization through coherent bleaching fronts, providing large depths of cure and rapid build rates without the need for moving parts. The coupling of these photoswitches with resin mixtures containing orthogonal photo-crosslinking systems allows simultaneous and selective curing of multiple networks, providing access to 3D objects with chemically and mechanically distinct domains. The power of this approach is showcased through the one-step fabrication of bioinspired soft joints and mechanically reinforced "brick-and-mortar" structures.

Light-Controlled Reversible Modulation of Frontier Molecular Orbital Energy Levels in Trifluoromethylated Diarylethenes.

Among bistable photochromic molecules, diarylethenes (DAEs) possess the distinct feature that upon photoisomerization they undergo a large modulation of their π-electronic system, accompanied by a marked shift of the HOMO/LUMO energies and hence oxidation/reduction potentials. The electronic modulation can be utilized to remote-control charge- as well as energy-transfer processes and it can be transduced to functional entities adjacent to the DAE core, thereby regulating their properties. In order to exploit such photoswitchable systems it is important to precisely adjust the absolute position of their HOMO and LUMO levels and to maximize the extent of the photoinduced shifts of these energy levels. Here, we present a comprehensive study detailing how variation of the substitution pattern of DAE compounds, in particular using strongly electron-accepting and chemically stable trifluoromethyl groups either in the periphery or at the reactive carbon atoms, allows for the precise tuning of frontier molecular orbital levels over a broad energy range and the generation of photoinduced shifts of more than 1 eV. Furthermore, the effect of different DAE architectures on the transduction of these shifts to an adjacent functional group is discussed. Whereas substitution in the periphery of the DAE motif has only minor implications on the photochemistry, trifluoromethylation at the reactive carbon atoms strongly disturbs the isomerization efficiency. However, this can be overcome by using a nonsymmetrical substitution pattern or by combination with donor groups, rendering the resulting photoswitches attractive candidates for the construction of remote-controlled functional systems.