Deep Margin Elevation - A Retrospective Clinical Study.

PURPOSE: The aim of this retrospective study was to assess the short- to mid-term restorative and periodontal outcome of deep margin elevation (DME) performed using resin composite. MATERIALS AND METHODS: Twenty-eight teeth treated with DME and indirect adhesive restorations were followed-up for a mean of 25.4 months (minimum: 12 months). Clinical and radiographic examination assessed the adaptation of the DME material and indirect restorations, presence of recurrent caries or discoloration, periodontal health at DME and non-DME sites, and periapical health. RESULTS: The overall success rate was 96.6%. One tooth showed signs and symptoms of apical pathology after 34 months following DME. No caries, discoloration, or periodontal pockets were detected in any of the treated teeth. DME had no detrimental effect on the gingival/periodontal health or plaque accumulation. There was no correlation between the distance from the DME material to the marginal bone level and pocket depth, gingival inflammation, and plaque accumulation (p > 0.05). CONCLUSION: Deep margin elevation might be considered a safe procedure for teeth with deep subgingival proximal caries in the short- and mid-term.

Molar root canal treatment performed by undergraduate dental students; an observational study of procedural errors and student perception.

BACKGROUND: Molar root canal treatment (RCT) is challenging and requires training and specific skills. Rotary instrumentation (RI) reduces the time needed for instrumentation but may increase the risk of certain procedural errors. The aims of this study were to evaluate the quality of molar RCTs provided by undergraduate students, to compare the prevalence of procedural errors following manual and RI, and to assess the students' self-perceived confidence to perform molar RCT without supervision and their preference for either manual or RI. METHODS: Molar RCTs performed by the final year students were evaluated radiographically according to predefined criteria (Appendix 1). The procedural errors, treatment details, and the students' self-perceived confidence to perform molar RCT and their preference for either manual or RI were recorded. Descriptive statistics were performed, and the Chi-squared test was used to detect any statistically significant differences. RESULTS: 60.4% of RCTs were insufficient. RI resulted in more sufficient treatments compared with MI (49% vs. 30.3% respectively. X2: 7.39, p = 0.007), required fewer visits to complete (2.9 vs. 4.6 respectively. X2: 67.23, p < 0.001) and was the preferred technique by 93.1% of students. The most common procedural errors were underextension of the root canal obturation (48.4%), insufficient obturation (45.5%), and improper coronal seal (35.2%) without a significant difference between the two techniques. 26.4% of the participating students reported that they did not feel confident to perform molar RCT without supervision. CONCLUSION: The quality of molar RCT provided by UG students was generally insufficient. RI partially improved the technical quality of RCT compared with MI. UG students need further endodontic training and experience before they can safely and confidently practise molar RCT.

Endocrowns Clinical Performance and Patient Satisfaction: A Randomized Clinical Trial of Three Monolithic Ceramic Restorations.

PURPOSE: The purpose of this randomized, double-blind, clinical trial was to assess the survival of endocrowns made from three different monolithic ceramic materials, and to evaluate patient satisfaction. MATERIALS AND METHODS: Fifty-three patients (sixty root canal treated molar teeth) were enrolled. Teeth were prepared to a flat butt-joint margin and randomly divided between three material groups: lithium disilicate-reinforced glass-ceramic, monolithic zirconia and polymer infiltrated hybrid ceramic. Predefined cementation protocols were used. Clinical assessment using modified United States Public Health Service (USPHS) criteria was carried out after two years by two independent clinicians blinded to the material used. Radiographic examination was conducted to check for the presence of caries, excess cement, and periapical infection. Statistical analysis was performed using the Kruskal Wallis and Wilcoxon signed-rank tests as well as the Kaplan-Meier survival estimate. RESULTS: Forty-eight patients were available for assessment after 2 years (recall rate 90.6%). The overall Kaplan-Meier survival estimate among all groups was 90.9% with no statistically significant difference between the groups (p = 0.17). Three zirconia endocrowns debonded after 9, 10 and 13 months (82.4% survival rate), while 2 hybrid ceramic endocrowns chipped/fractured (89.5% survival rate). Lithium disilicate endocrowns had a 100% survival rate. The Kruskal Wallis test revealed no statistically significant difference between the groups in the USPHS criteria ratings and the radiographic assessment (P>0.05). Patient satisfaction ranged from 82.3% in the zirconia group to 100% in both the lithium disilicate and hybrid ceramic groups. CONCLUSIONS: Endocrowns provide a predictable option for the restoration of endodontically treated molar teeth in the short term. Lithium disilicate-reinforced ceramic had fewer complications and required less intervention compared with zirconia and hybrid ceramics. Long-term follow-up is required to substantiate these study results.

Effect of freshly placed core buildup composites on setting of silicon impression materials.

Aim: The aim is to study the effect of freshly placed composite build-ups on setting of additional silicone impression materials. Settings and Design: In vitro - experimental study. Materials and Methods: Three composite materials; Build-It™ F. R™, Filtek™ Bulk Fill flow and Filtek™ Z350 and three light-bodied additional silicone impression materials; Elite HD+, Aquasil LV Ultra and Express™ were used. Cylindrical-shaped specimens were made of each material (diameter 15 mm and height 10 mm). The silicone specimens were brought into contact with the composite specimens, which were either freshly cured (9 groups, n = 90) or cured and then stored in normal saline for 1 week (9 groups, n = 90). Shore A hardness (SAH) scores of silicone surfaces were recorded following the ASTM D2240-5 standards for shore A Durometer testing. Six measurements were made per each silicone surface and medians were calculated. Kruskal-Wallis and Mann-Whitney tests (SPSS v20) were used to check statistical significant differences between all groups and paired comparisons, respectively (P < 0.05). Statistical Analysis Used: Kruskal-Wallis and Mann-Whitney tests. Results: The SAH scores of additional silicones in direct contact with freshly placed composites were significantly less than SAH scores of additional silicones in direct contact with composites specimens aged for 1 week in 7 out of 9 combinations (P < 0.05). Only when Express™ and Elite HD+ were applied over freshly placed Filtek™ Bulk Fill flow, the SAH scores difference was not statistically significant to SAH scores of matching combinations applied after 1 week of composite storage. Conclusions: Freshly placed composite might affect setting of additional silicone impression materials. Dentists should carefully assess final impression on areas of prepared teeth that have received composite fillings recently.

Impact of COVID-19 pandemic on dental education: online experience and practice expectations among dental students at the University of Jordan.

BACKGROUND: The quarantine associated with the COVID-19 pandemic forced dental schools to suspend their clinical training and to shift to distant learning methods. The aim of this study is to investigate the impact of quarantine on the self-perceived preparedness of dental graduates and to explore the efficacy of online education from students' perspectives. METHODS: The questionnaire distributed to dental students comprised of two main sections. The first part covered the online education experience, and the second part measured the level of self-perceived preparedness for a range of cognitive, communication and professional skills. RESULTS: The survey yielded a response rate of 72%. The majority of students (77%) agreed that they missed educational experiences as a result of the lockdown. More than half of them felt less motivated to follow-up with distant e-learning and believed that online assessment is not a good method for evaluation. A high percentage of the students (66%) thought that online group discussions had a positive value while 67% preferred online lectures compared to theatre lectures. Majority of students particularly 5th year (78.7%) (p < 0.001) stated that the quarantine increased their collaboration with their colleagues. According to 87% of students, the experience most negatively affected was their clinical training. In general, students showed satisfactory self-perceived preparedness related to a range of attributes and professional skills. CONCLUSIONS: The data showed that students partially appreciated the online system, whereas they did not consider it a substitute for face to face clinical practice. The overall self-perceived preparedness level was promising; however students had reservations regarding independent practice following graduation.

Awareness of the risk of developing medication-related osteonecrosis of the jaw among bisphosphonate users.

OBJECTIVE: In this retrospective observational study, we evaluated awareness among patients using bisphosphonates (BPs) regarding the risk of developing medication-related osteonecrosis of the jaw (MRONJ) and whether they received appropriate dental screening and treatment prior to commencing medication. METHODS: Patients using BPs who attended the endodontics clinic at Jordan University Hospital in 2019 were interviewed using a pre-designed questionnaire. Data were analysed using descriptive statistics and chi-squared tests. RESULTS: In total, 110 patients were interviewed (84 women, 26 men; age 40-78 years). A total of 94 patients were using oral BP and 16 received intravenous (IV) BP. We found that only 12.4% of participants were aware about the risk of MRONJ following BP use, and only one third of them has received information from their prescribing physicians. In total, 5% of participants were referred to a dentist for screening prior to initiating BP treatment. Patients receiving IV BP and those with a university-level education had better awareness about the risk of MRONJ than oral BP users and those with a high school education level. CONCLUSION: Patients' awareness about MRONJ risk was low in our population. Better patient education and collaboration among physicians and dentists are needed prior to starting BP treatment.

Prevalence and Configuration of the Second Mesiobuccal Canal in the Permanent Maxillary First Molar in Jordanian Population Sample.

Introduction: Missing a root canal during endodontic treatment implicates the persistence of microbial infection within the root canal system. This study aims to evaluate the incidence and morphology of the second mesiobuccal canal in the maxillary first molars in the Jordanian population. Methods and Materials: Consecutive cone-beam computed tomography (CBCT) scans taken at Jordan University Hospital were assessed in this retrospective study. A total of 200 scans that were examined, 111 were included in this study. The scans that were included had to have a full view of the maxilla with at least one permanent maxillary first molar. The following data were collected: the presence of a second mesiobuccal canal, the configuration of the mesiobuccal canals, the status of the apical area and the mesiobuccal inter-orifice distance, if applicable. The prevalence and morphology of the second mesiobuccal canal was determined and its association with biological sex and right or left sidedness was measured using the Chi-Square test. Results: The prevalence of the second mesiobuccal canal in our sample of the Jordanian population was 87%, with the most common canal configuration being Vertucci type II. The average inter-orifice distance between first and second mesiobuccal canals was 1.9 ± 0.4 mm. Conclusion: This retrospective study is the first in Jordan to document the prevalence of the second mesiobuccal canal using CBCT, and it shows that the vast majority of teeth have a second mesiobuccal canal. The proper location and negotiation of this canal is of dire importance for endodontic therapy.

Diagnostic delay and suboptimal management in persistent idiopathic facial pain and persistent dentoalveolar pain; a cross-sectional study.

OBJECTIVES: The aim of this study was to explore the diagnostic and therapeutic challenges encountered by patients with persistent idiopathic facial pain (PIFP) and to investigate factors influencing its delayed diagnosis. STUDY DESIGN: In this cross-sectional study, 34 patients with newly diagnosed PIFP were interviewed. Data about diagnostic delay, number and nature of previous consultations, and previous medical and surgical interventions were recorded. Pearson's correlation and Student t test were used to examine the differences among the variables in relation to diagnostic delay. RESULTS: The average time between the onset of symptoms to correct diagnosis was 19.3 ± 11.1 months. Diagnostic delay was significantly longer in patient with pain localized to intraoral sites (22.6 ± 7.4) compared with patients with extraoral pain (16.1 ± 9.3). The average number of health care professionals consulted before correct diagnosis was 3.7 ± 2.3. General dental practitioners were the most commonly consulted health care professionals (n = 27; 79.4%). On average, patients were given 2.3 ± 0.24 misdiagnoses before the correct diagnosis was determined and were prescribed 3.5 ± 2.4 classes of drugs. Twenty-five patients (73.5%) underwent unnecessary surgical/dental interventions. CONCLUSIONS: Patients with PIFP are frequently misdiagnosed, leading to prescription of ineffective medications and unnecessary investigations and surgical interventions. Educational efforts should emphasize on improving knowledge and awareness of this condition.

Satisfaction of undergraduate students at University of Jordan after root canal treatment of posterior teeth using rotary or hand preparation.

The aim of this study was to report the satisfaction of fifth year undergraduate students on the clinical use of rotary endodontic preparation compared with stainless steel standard technique and to evaluate the impact of rotary nickel-titanium instruments on undergraduate teaching. This study was carried out by the fifth year undergraduate students attending peer review sessions as a part of their training program using a questionnaire to assess their satisfaction with these two techniques. The overall results indicated a statistically significant satisfaction of the undergraduate students with the use of the nickel-titanium system (P < 0.001) compared to stainless steel standard technique. Under the conditions of this study, the results showed a positive acceptance and consensus among novice dental students regarding the use of ProTaper rotary files and the need for undergraduate teaching of rotary nickel-titanium systems in Jordan.

Resistance to vertical fracture of MTA-filled roots.

AIM: To investigate the effect of MTA root canal fillings on the resistance to vertical root fracture (VRF) over different time intervals. MATERIAL AND METHODS: Freshly extracted anterior human teeth with single canals and minimal curvatures were decoronated, instrumented to size 50/.05 ProTaper file, irrigated with 1%NaOCl and randomly allocated to one of three groups (n = 36): (i) filled with MTA, (ii) filled with gutta-percha and sealer and (iii) unfilled roots used as a negative control. Each group was subdivided into three subgroups (n = 12) according to the storage time of 48 h, 1 and 6 months at 37°C in synthetic tissue fluid (STF). Following the storage periods, filled roots were mounted in acrylic supports, and the periodontal ligament was simulated using elastomeric impression material. Vertical loading was carried out with a ball-ended steel cylinder fitted on a universal testing machine at 1 mm/min crosshead speed. The maximum force at fracture (F-max) and the fracture mode were recorded for each root. RESULTS: Data were statistically analysed using two-way anova and Bonferroni post hoc tests. The mean F-max was significantly higher in the MTA subgroups after 1 and 6 months compared with all other subgroups. Two modes of fracture were identified: split and comminuted. The mean F-max values recorded with the latter were significantly higher compared with the former (P < 0.001). In all groups, split fracture was the most dominant mode apart from the MTA/1 month and MTA/6 month groups. CONCLUSION: MTA increases the resistance to VRF of endodontically treated teeth and influences the mode of fracture after 1 and 6 month of storage in STF compared with gutta-percha and sealer.

The effect of smear layer on the push-out bond strength of root canal calcium silicate cements.

INTRODUCTION: The aim of this study was to evaluate the effect of smear layer removal on the push-out bond strength between radicular dentin and three calcium silicate cements (CSC) in comparison with gutta percha and sealer. METHODS: Eighty human anterior extracted teeth were decoronated, cleaned and shaped to size 50/0.05 apically and randomly divided into 2 major groups: (A) smear layer preserved, and (B) smear layer removed using irrigation with 17% EDTA. Roots within each major group were further divided into 4 subgroups according to the obturation material used: (1) ProRoot MTA, (2) Biodentine, (3) Harvard MTA, (4) Gutta percha and AH-plus sealer. Obturated roots were stored in synthetic tissue fluid for 7 days to allow maximum setting of the root filling materials. Three 2-mm-thick slices were obtained from each root at different section levels (coronal, middle, apical). The canal diameters and slice thickness were measured, and the adhesion surface area for each slice was calculated. Push-out bond strength test was carried out using a universal testing machine. The bond failure mode was assessed under an optical microscope at 40×. RESULTS: The mean push-out bond strength in groups 1A, 2A and 3A were 7.54 (±1.11), 7.64 (±1.08) and 8.79 (±1.55)MPa respectively, while those for groups 1B, 2B and 3B were 6.58 (±1.13), 6.47 (±1.08), 7.71 (±1.81)MPa, respectively. In the gutta percha and sealer groups the push-out bond strength means were: 1.98 (±0.48) and 2.09 (±0.51)MPa in the preserved and removed smear layer groups respectively. The push-out strength values were significantly reduced when the smear layer was removed in the CSC groups (P<0.05) while no significant difference was detected in the gutta percha and sealer groups. CONCLUSIONS: Based on the conditions of this ex vivo study, it can be concluded that smear layer removal is detrimental to the bond strength between calcium silicate cements and dentin.

A micro-computed tomography evaluation of mineral trioxide aggregate root canal fillings.

INTRODUCTION: The aim of this study was to assess the effect of indirect ultrasonic activation on the incidence of voids within mineral trioxide aggregate (MTA) root canal fillings and at their interface with the canal walls by using a nondestructive 3-dimensional (3D) micro-computed tomography (micro-CT) analysis. METHODS: Extracted human teeth with single canals and minimal curvatures were decoronated, instrumented to size 50/05 apically, and randomly allocated into 4 groups (n = 12). MTA was compacted manually by using hand pluggers in group A (MC). Indirect ultrasonic activation was applied to each increment of manually compacted MTA for 1 second in group B (1 sec-UC), 5 seconds in group C (5 sec-UC), and 10 seconds in group D (10 sec-UC). Filled roots were scanned with a micro-CT device, and 3D analysis of void incidence was carried out by using the SkyScan software. RESULTS: Statistical analysis showed a significantly lower incidence of voids (P < .05) in the manual compaction (MC) group (0.7%) compared with the ultrasonic activation for 1 second (3.8%), 5 seconds (1.7%), and 10 seconds (1.6%) groups. CONCLUSIONS: Manual compaction produced significantly denser root fillings than those achieved with ultrasonic activation.